Used Jaespa Msp 4 for sale (58,346)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Iaedpfsd Tbbdox Ap Hju - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Iaodpfxed Tqalj Ap Heu The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Iaedefdkb Uopfx Ap Hou Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. Iasdpfsguk A Hsx Ap Hou The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Iodpfx Apsfdkbhj Heau - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Iedpfx Asguk Dksp Heau The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. Iasdjguk Dvopfx Ap Hsu We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, pallet spaces: 108 euro pallets, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Ijdsv Ukz Aepfx Ap Hjau Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: good (used), mileage: 739,722 km, power: 310 kW (421.48 HP), first registration: 12/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, seat heater, second fuel tank, soot filter, spoiler, - Aluminum fuel tank - Bluetooth - Brake booster - EPS (Electronic Power Steering) - Low noise - Particulate filter - Radio/CD player - Rain sensor - Sliding roof - Sleeper cab - Side door - Seat heating - Auxiliary heater - Toolbox Axle configuration Front axle: Steering; Suspension: Leaf springs Rear axle: Suspension: Air suspension Weights Curb weight: 7,932 kg Payload: 11,068 kg Gross vehicle weight: 19,000 kg Condition Technical condition: good Visual condition: good Warranty Warranty: No liability for printing and typographical errors, changes, prior sale and errors excepted! Identification Reference number: 64 Further information Contact Emad Al Shogran for more information. Vehicle number: 64 Mercedes Benz Actros StreamSpace / Euro 6 / 2 x Tank VIN: WDB96340310106626 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Auxiliary heater Distance control assistant Lane keeping assistant Emission standard EURO 6 2 x tank Special equipment: Audio system: CD radio, Cab: width 2.50 m, Suspension: front springs 7.5 t, 2-leaf, parking brake also on front axle, tinted windshield, Info display 10.4 cm with additional indicator, integral rear, Fuel tank: Combination aluminum tank - 820 L diesel + 90 L AdBlue, Cool box / refrigerator, air intake behind cab, Roof and side air deflectors, mounting plate / fifth wheel plate 40 mm, reinforced engine brake, drawers under console, seats in cab: comfort driver's suspension seat, external sun visor, 12V socket in passenger footwell, additional 24V socket in passenger footwell Additional equipment: Emission standard EURO 6, Axle configuration: 4x2, Front axle load 7.5 t, Actros 4, Trailer socket 24V / 15-pin, Work lamp, exhaust to right side, electrically adjustable and heated exterior mirrors, rear axle differential lock, steel air reservoir, medium compressed air unit, Driver assistance systems: Attention Assist (fatigue detection sensor), Brake Assist (Active Brake Assist), Lane Keeping Assistant, Cab: L StreamSpace, Cab: steel sprung, comfort, Suspension: leaf / air, front spring bracket aluminum, electric windows, alternator 100A, 12-speed transmission - type: G 211-12, rear axle ring gear 440, Bodywork: tractor unit, comfort bunk lower, central locking system, communication interface, 3-piece mudguard, radiator louver, regulated steering pump, 2-stage air compressor, engine 12.8 L - 310 kW inline-6 diesel (OM 471), engine compartment encapsulation, wheelbase 3700 mm, ramp mirror, residual heat utilization, disc brakes front and rear axles, seat upholstery: fabric, cab seats: functional passenger seat, foldable driver's backrest, voltage converter 24V/12V 10A, front splash guard, front axle stabilizer, external left storage compartment, cab socket 24V, tachograph / EC control unit, door extension for cab, aerodynamically shaped underbody panel, front underrun protection, CB radio preparation, toll pre-installation, cranked front axle, regulated water pump, permissible gross weight 18,000 kg, additional heater (water) No... Iaodpfxeyg N Sbe Ap Hou

Condition: good (used), Year of construction: 1998, machine/vehicle number: 19263.98, Offer 24149 Technical data: - Cutting area at 90° round 320 mm - flat 300 x 270 mm - Material feed stroke up to 500 mm - Multiple strokes unlimited Iajdsvvim Tjpfx Ap Hou - Remaining piece length in automatic mode 125 mm - Saw band dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - Hydraulic lifting - lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure continuously adjustable 0 - 10 m/min - Hydraulic material vice - Chip conveyor - Saw band cleaning brush - Coolant device - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm

Condition: good (used), Year of construction: 2007, machine/vehicle number: 22428.07, Offer 22252 Technical Data: - Cutting range at 90° round + square: 330 mm - flat: 600 x 320 mm - Mitre adjustable left / right: 30 / 45° - Cutting range at 45° right + left round: 320 mm flat: 350 x 320 mm - Material support height: approx. 920 mm Iaodpfx Aown Dy Dsp Heu - Saw band dimensions: 4440 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 10 to 100 m/min - Hydraulic lifting – lowering of the saw frame - Upper lift limitation of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Hydraulic material clamping vice - Cooling device - Total drive power: 400 V / 2.2 kW - Required space: approx. W 1400 x H 1400 x D 2400 mm - Weight: approx. 1000 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 24451.19, Offer 25359 Technical Data: Iasdjxup Rfepfx Ap Hsu - Cutting capacity at 90° (round): 250 mm - Cutting capacity at 90° (flat): 275 x 180 mm - Miter adjustment to the left - Cutting capacity at 45° (round): 200 mm - Cutting capacity at 45° (flat): 190 x 180 mm - Cutting capacity at 30° (flat): 130 x 110 mm - Material support height: approx. 920 mm - Saw band dimensions: 3100 x 27 x 0.9 mm - Infinitely variable cutting speed: 15 to 100 m/min - Hydraulic lifting and lowering of the saw frame - Upper travel limit of the saw frame - Infinitely adjustable cutting pressure: 0 – 10 m/min - Hydraulic material vice - Micro-spray cooling system - Total drive power: 400 V / 2.2 kW - Required space approx.: W 2400 x H 1600 x D 1800 mm - Weight approx.: 1300 kg - 3 x Roller conveyor, each 1500 mm

Condition: good (used), mileage: 713,009 km, first registration: 11/2014, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, cruise control, fog lights, power mirror, soot filter, spoiler, - Aluminum fuel tank - Leaf suspension - Roof spoiler - EPS (Electronic Stability Program) - Particulate filter - Radio/CD player - Sleeper cab - Side door - Stability control - Toolbox Front axle: steered; Suspension: leaf suspension Rear axle: Suspension: air suspension Unladen weight: 7,470 kg Payload: 11,530 kg Gross vehicle weight: 19,000 kg Technical condition: good Visual condition: good Guarantee: No liability for printing or typographical errors. Subject to changes, prior sale, and errors! Contact Emad Al Shogran for more information. Vehicle number: 37 Mercedes Benz Actros 1845 StreamSpace 2.30 / Retarder / Stationary air conditioning / Euro 6 VIN: WDB9634031L902994 Suspension: leaf / air Transmission: automatic Air conditioning Engine brake Cruise control Stationary air conditioning Emission standard EURO 6 Special Equipment: Trailer socket 15-pin 7+7-pin, Audio system: CD radio, compressed air connection in driver`s cab, air horn, fire extinguisher, info display 12.7 cm with additional indicators, integral rear, air intake behind driver`s cab, aerodynamic roof and side fairings (latchable), mounting plate / fifth wheel plate 40 mm for fifth-wheel coupling, reinforced engine brake, PremiumComfort mattress lower bunk, chassis height lowered by 25 mm, spare wheel, acoustic reversing warning (external signal), fleet management system interface, 12V socket in passenger footwell, additional 24V socket in passenger footwell Additional Equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 7.5 t, Actros 4, trailer socket 24V / 15-pin, work lights, exhaust right side, exterior mirrors electrically adjustable and heated, rear axle differential lock, steel air tank, medium air supply unit, cab width 2.30 m, cab: L StreamSpace, cab: steel sprung, comfort, cab floor with engine tunnel 170 mm, suspension: leaf / air, front spring mounting aluminum, front springs 7.5 t, 1 leaf, electric window lifts, tinted windshield with sunband, generator 100 A, transmission 12-speed - type: G 281-12, urea tank (AdBlue): 60 liters, rear axle ring gear 440, body/structure: tractor unit, lower comfort bunk, comfort locking system, communication interface, three-piece mudguard, fuel tank: 570 liters aluminum, radiator grille, regulated power steering pump, two-stage air compressor, engine 12.8 L - 330 kW R6 diesel (OM 471), engine bay encapsulation, wheelbase 3700 mm, side view mirror, residual heat utilization, disc brakes front and rear axles, seat covers/upholstery: fabric, seats in cab: passenger function seat, seats in cab: driver standard air suspension seat, seats in cab: folding driver's seat backrest, voltage converter 24V / 12V 10A, front spray guard, front axle stabilizer, exterior left stow compartment door, driver cab socket 24V, tachograph / EC control device, door extension for cab, aerodynamically shaped underbody cladding, front underride guard, CB radio preparation, toll system preparation, cranked front axle, regulated water pump, permissible total weight 18.00 t, additional heating (water) No liability for printing or typographical errors. Subject to changes, prior sale, and errors! Al Shogran GmbH An der Glashütte 15 Iasdpfx Apexhcv Is Heu 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email....

Condition: good (used), mileage: 900,526 km, power: 290 kW (394.29 HP), first registration: 05/2016, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: AdBlue, air conditioning, cruise control, electric window regulation, fog lights, parking heater, power mirror, soot filter, spoiler, - Aluminum fuel tank - Leaf suspension - Brake booster - Roof spoiler - EPS (electronic power steering) - Air horn - Particulate filter - Radio/CD player - Spare wheel - Sleeper cab - Side door - Auxiliary heater - Toolbox Front axle: Steering; Suspension: Leaf Rear axle: Suspension: Air Unladen weight: 7,749 kg Payload: 11,251 kg Gross vehicle weight: 19,000 kg Technical condition: good Visual condition: good Warranty: No liability for printing or typographical errors, subject to changes, interim sale and errors! Please contact Emad Al Shogran for further information. Vehicle number: 106 Mercedes Benz Actros 1840 StreamSpace / Euro 6 VIN: WDF9634031B982712 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Auxiliary heater Distance warning assistant Lane assist Emission standard EURO 6 Special equipment: Trailer socket 15-pin, 7+7-pin, Audio system: CD radio, Air horn, Cab width: 2.50 m, Suspension: front springs 7.5 t, 2-leaf, Fire extinguisher, Integral rear, Fuel tank: Combo aluminum tank – 820 l diesel + 90 l urea (AdBlue), Air intake behind cabin, Roof and side air deflectors (adjustable), Mounting plate / fifth wheel plate 12 mm for fifth wheel coupling, Reinforced engine brake, PremiumComfort lower mattress, Frame height lowered by 25 mm, Spare wheel, Side-mounted spare wheel carrier, Additional 24V socket in passenger footwell Further equipment: EURO 6 emission standard, Axle configuration: 4x2, Front axle load 7.5 t, Actros 4, Trailer socket 24V / 15-pin, Work lamps, Exhaust outlet to right outer side, Electrically adjustable and heated exterior mirrors, Rear axle differential lock, Steel air tank, Medium compressed air unit, Driver assistance system: Attention Assist (fatigue detection sensor), Driver assistance system: Brake Assist (Active Brake Assist), Driver assistance system: Lane Assist, Cab: L StreamSpace, Cab: steel sprung, Comfort level, Suspension: Leaf / Air, Front spring bracket aluminum, Electric window regulators, Tinted windscreen with band filter, 100 A alternator, 12-speed gearbox – Type: G 211-12, Rear axle crown wheel 440, Info display 10.4 cm, Body: Tractor unit, Comfort lower bunk, Central locking, Communication interface, 3-piece mudguard, Radiator grille, Regulated power steering pump, 2-stage air compressor, Engine 10.7 l – 290 kW inline-six diesel (OM 470), Engine bay encapsulation, Ramp mirror, Residual heat utilization, Disc brakes front and rear axles, Seat cover/upholstery: fabric, Cabin seats: passenger function seat, Cabin seats: driver's suspension seat standard, Cabin seats: foldable driver's backrest, Converter 24V / 12V 10 A, Front spray protection, Front axle stabilizer, External left storage flap, Driver's cab 24V socket, Tachograph / EC control device, Extended cab door, Aerodynamically-shaped underrun protection, Front underrun bar, CB radio pre-installation, Toll system pre-installation, Cranked front axle, Regulated water pump, Perm. gross weight 18.00 t, Additional heater (water). No liability for printing or typographical errors, changes, interim sale and errors reserved! Al Shogran GmbH An der Glashütte 15 Iedpfx Ajxhcw Esp Hjau 41516 Grevenbroich Tel.: ...

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H With manual gate valve Gas strut opening lid Internal stainless mesh screen Mobile on lockable castors Some with pneumatic vibration device. Iaodpeurf Twjfx Ap Hou Some with level sensor device In excellent condition

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Iaodpfjwq Sv Ejx Ap Hsu Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: used, Round magnets with MK 4 mount, D = 140 mm and D = 220 mm Iedpfxjyr Nd Uo Ap Hoau

Condition: used, Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, We offer this used FORMAT-4 PROFIT H200R 13.33 throughfeed machining centre, year of manufacture 2022. Type: PROFIT H200R 13.33 Serial number: 30B.05.067.22 Code: 9417 Rated voltage: 400.0 V Number of phases: 3P+N Frequency: 50/60 Hz Rated current: 40.0 A Ijdsyvtq Uspfx Ap Hjau Power: 18.0 kW Year of manufacture: 2022 Control voltage: 24 VDC Minimum protection fuse: 32 A Maximum protection fuse: 50 A Minimum compressed air supply: 8 bar Air consumption: 350 Nl/min If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Outreach 630 mm --- Cutting speed from 15 - 120 m/min --- Hydraulic table feed --- Table load approx. 450 kg --- Hydraulic lifting rollers in the table --- Table feed travel 400 mm . Table to the right of the saw blade, W x D 500 x 975 mm Table to the left of the saw blade, W x D 500 x 975 mm . Designed for cutting high-quality material or for setting up clamping fixtures Iodpfx Asyr Hgaep Hoau .

Condition: used, Year of construction: 2011, cutting diameter 260 mm saw band length 3340 x 27 x 0,9 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 380 x 260 mm band speed 37 / 74 m/min sawing motor 1,5 kW weight of the machine ca. 0,62 t dimensions of the machine ca. 1,7 x 1,4 x 1,3 m Miter band saw - Semi-automatic - Double miter Iaodpfx Apewkvq Hj Hju - Material detection during lowering - incl. 7 saw blades

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Iajdpexhdthjfx Ap Hsu Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 3,690 mm, total height: 8,350 mm, For sale: A robust industrial steel platform staircase with four levels, suitable for use in production halls, factories, and technical installations. The structure consists of multiple landings with fixed stairs and is made of steel, equipped with safety railings (yellow) around the platforms. The staircase is designed for intensive industrial use and provides safe access to higher installations or machinery. The construction is freestanding, stable, and suitable for fixed installation on a concrete floor. Specifications: Type: Industrial platform staircase / work platform Material: Steel Number of levels: 4 Total height: approx. 8.35 meters Iaedpoyf Un Sjfx Ap Hou Landing heights: 1st level: approx. 1.81 m 2nd level: approx. 3.60 m 3rd level: approx. 5.40 m 4th level: approx. 7.22 m Width: 200 cm Length: 396 cm Staircase length (diagonal): approx. 3.96 m Design: fixed stairs with intermediate landings Safety features: railings around the platforms

Condition: good (used), Year of construction: 2007, Geared motor, spur geared motor -Power: 0.25 kW -Speed: 43 rpm -Shaft: Ø 20 mm -Design: B14 -Protection rating: IP65 -Quantity: 1 available Ijdpfx Aeb A H S Njp Heau -Dimensions: 458/133/H215 mm -Weight: 17.7 kg

Condition: new, empty load weight: 490 kg, maximum load weight: 1,510 kg, overall weight: 2,000 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 155R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2000 405x178 Go-Getter. The standard equipment of the Anssems flatbed high loader with brake includes black aluminum side panels, all foldable and removable, black rims, storage box, LED lighting, sturdy eccentric locks, lashing eyes on the outside and inside, profile channels for attaching accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, belts and anti-theft device. Iasdpoq Rfkcefx Ap Hou

Condition: new, empty load weight: 490 kg, maximum load weight: 2,500 kg, overall weight: 2,500 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 185/70R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2500 405x178 Go-Getter. The standard equipment of the Anssems flatbed high loader with brake includes aluminum drop sides, all folding and removable, stable eccentric locks, lashing eyes on the outside and inside, profile channels for mounting accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. Iasdpoq Rfk Defx Ap Heu We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, accessory box, straps and anti-theft device.