Used Jaroma Dsva-40 for sale (22,362)

Condition: new, Year of construction: 2025, Weighing unit with 10 weighing heads (springless hoppers) for very precise weigh checking, with 4.0-Liter volume each. Special design for wet environments and/or products or where a frequent washing of the machine is required (Salads, pet food, frozen food up to 150mm, non food, etc). - Specifications: max. speed of the machine in neutral: 50 cycles/minute; weighing range: 10-3000g, accuracy: +/- 0.5-2.0g; touchscreen (large version) operation; stainless steel; 220V, 2.0kW; L1906xW1266xH1603; 700/750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Godev Nmrmepfx Afuobu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic carton closing machine for seal and tape the lids of the cases. Sealing and taping (in only one way) of same sized boxes in an efficiently, rapidly and precisely way. - Specifications: size of boxes in mm L(200-600)xW(150-500)xH(150-500); max. speed of the machine in neutral: 40 cycles/minute; power: 110/220V, 0.3kW; tape width in mm: 48/60/70; machine dimensions and weight: L1690xW830xH1180mm, 180kg. Gjdpfx Afjv Nkv Neuobu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Stand-Alone Paste Filling machine to fill viscous substances in cans, containers, etc. Suitable for various viscous substances e.g.: pastes, creams, ointments. Manual operation via footswitch or automatic filling at set speed. Can be used with included hopper or by suck the liquid from a separate tank through a pipe. Filler moves from bottom to top of container during the filling process. - Specifications: acuraccy: +/- 0,5%; max. speed of the machine in neutral: 40 cycles/minute; stainless steel version; power: 220V, max. 1.0kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Gbodpfxjv Nk E Re Afuou

Condition: new, functionality: fully functional, Year of construction: 2026, Genie Z62/40 TraX, new, used, demonstration machines available Gbedpev Rmttsfx Afusu

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2017, total width: 2,550 mm, total height: 1,720 mm, suspension: air, tire size: 385/65/22.5, wheelbase: 7,510 mm, color: grey, Year of construction: 2017, Equipment: ABS, = Additional Options and Accessories = - Disc brakes = Further Information = Gbodpfxow Rx S Se Afuju Axle configuration Tire size: 385/65/22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 40%; Tire tread right: 40% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 40%; Tire tread right: 40% Weights Unladen weight: 5,700 kg Payload: 33,300 kg Gross vehicle weight: 39,000 kg Condition Technical condition: very good Visual condition: very good Further information Please contact Bas Wolfs or Bas Wolfs for more information.

Condition: good (used), Technical specifications for pallet rack beam: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x Pallet rack beam, used Material colour: RAL 5010 gentian blue Beam type: TRV1-290-124-30 CE Box profile: 120 x 40 mm Connector: 5 HK (hooks) Clear span: 2,900 mm Max. load capacity per pair of beams: 3,100 kg, with evenly distributed load 02x Safety pins, used Finish: fully galvanized For securing the longitudinal beams against unintentional lifting Your contacts in our company: Mr. Andre Evering Gbedpjw S Da Dsfx Afueu Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transportation or shipping of this item is required, additional costs will apply, which can be provided separately depending on the place of delivery or the scope of delivery.

Condition: as good as new (ex-display), Year of construction: 2023, pressure 40.0 t chamfer lenght 1600 mm Gsdjxabumjpfx Afuobu distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm oil volume 130 ltr. voltage 400 Volt Control ESA E21 total power requirement 4.0 kW weight 3030 kg range L-W-H 2050 x 1800 x 2030 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)

Condition: excellent (used), Professional industrial vacuum cleaner KÄRCHER IVR-L 40/12-1 designed for use in production facilities, workshops, and metalworking applications. This unit is ideal for collecting liquids (such as coolant and oil) as well as metal chips. Its robust construction, large tank, and mobile base make this machine highly practical for daily industrial operations. ⸻ ⚙️ Applications: • CNC machines • Metalworking (chips + emulsions) • Workshops and manufacturing • Industrial liquid collection ⸻ 🔧 Technical specifications (typical for this model): • Model: IVR-L 40/12-1 • Series: Kärcher Professional • Power supply: 230V • Tank capacity: approx. 40L • Intended use: liquids + chips • Mobile design on wheels ⸻ 🛠️ Condition: • Used machine • Fully operational, tested • Very good visual condition • Normal signs of use (visible in photos) ⸻ 📦 Included: • Kärcher IVR-L 40/12-1 vacuum cleaner • Suction hose • Power cable ⸻ Gbedpfsyxwhiox Afuju ⭐ Advantages: ✔ Industrial-grade Kärcher Professional quality ✔ For liquids and solid contaminants ✔ Perfect for workshops and production ✔ Mobile, stable on wheels ✔ High durability and reliability ⸻ 🚚 Shipping: Shipping by courier or on a pallet possible. Personal collection available.

Condition: used, Year of construction: 2007, operating hours: 15,936 h, Type of fuel: Electric Colour: Grey Empty weight: 6.777 kg Dimensions (LxBxH): 290 x 125 x 318 cm Lifting capacity: 4.000 kg Lift height: 491 cm Fork dimensions: 1.200 x 1.150 mm - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516327000881 - Operating hours: 15936 - Lifting capacity: 4000kg - Lifting height: 4910mm - Overhead clearance: 3180mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 1150mm - Minimum fork width: 440mm - Number of wheels: 4 Wheels - Attachment: Fork positioner, Side-shift - Options: Full cabin, Radio, Joystick, Heating, Work lights - Mast: Duplex - Drive: Electric - Battery information: - └ Capacity: 930Ah - └ Battery voltage: 80V - Transport dimensions: 2900mm x 1250mm x 3180mm (l x w x h) - Transport weight [kg]: 6777kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gbedjymdx Nepfx Afusu Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2016, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Gsdpfoymi I Asx Afusbu Rädlinger swing rotator for CAT M318 / CW 40 mount / Year of manufacture: 2016 Price: €12,890.00 net / €15,339.10 gross - Equipment class: 23 t - Weight: 840 kg Matching rigid ditch cleaning bucket available for €1,490.00 net. Price only applicable when purchased together with the swing rotator. We have many more attachments in stock, available immediately! Financing offers available on request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telescopic handlers, JCB construction equipment, Mercedes-Benz, and Iveco. Additionally, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No: 562046 = More information = Intended use: Construction Please contact Marius Herden for further information.

Condition: used, functionality: fully functional, Ferwood code: RU0009932 - Manufacturer code: 4-014-12-0207 - Condition: Used - Functionality: Fully operational - Compatible machine: - If interested, we offer an overhaul service. Please contact us. 1KG - 20X20X20 Gbedpfx Ajyk Edujfusu

Condition: used, axle configuration: 3 axles, first registration: 04/2000, color: other, Year of construction: 2000, Empty weight: 4.760 kg Axle 1: left 8 mm right 8 mm Gbodpfx Aozi Dnhsfusu Axle 2: left 6 mm right 6 mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Year of construction: 1991, operating hours: 19,888 h, condition: used, - Year: 1991 - Documentation available: No Gbsdszldwbjpfx Afuou - CE certificate present: No - Serial number: 1844 - Operating hours: 19888 - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany Gedpjzlkgcefx Afusbu With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: used, Year of construction: 1992, functionality: fully functional, power: 330 kW (448.67 HP), control type: PLC-controlled, actuation type: hydraulic, For sale is a used Quattro Spaner bandsaw, Super 40 model, manufactured in 1992, consisting of: - Spaner - Centering unit - 4-bandsaw system Super 40 This system is particularly suitable for the efficient cutting of light to medium-strength round timber and enables precise and efficient processing in a compact design. Technical data: Max. round timber diameter: 58 cm → Debarking up to 42 cm Min. round timber diameter: 13 cm → Debarking up to 8 cm Feed rate: up to approx. 59 m/min → Reduced to approx. 20 m/min for large cross-sections Daily output: approx. 250–300 cubic meters/day → Depending on round timber diameter and cutting Godpfezvx Shsx Afuebu Condition and previous use: The system was in operation at a sawmill with an annual production of approximately 50,000 cubic meters in a single-shift operation until summer 2025. It was regularly maintained until it was taken out of service and was fully functional. However, due to its age and for reliable long-term operation, a complete overhaul is necessary. An inspection of the system for sale is possible by arrangement. An identical Quattro system, which has already been completely overhauled, can be inspected on-site during ongoing production. This allows interested parties to gain a clear picture of the system's performance and potential applications after an overhaul (see photo). Price on request. We will gladly send further technical information as well as photos and videos upon request. Inspection is possible after prior appointment.

Condition: used, The scope of delivery includes: 1x steel beam, used Material color: orange Box profile: 130 x 40 mm Agraffe: 4 HK (hooks) Overall length: approx. 2,780 mm Length of box profile: approx. 2,680 mm Gedpfx Afezvlrnoujbu Note: This is a former pallet rack crossbar that can no longer be used in its current form. If you separate the agraffe here, you will obtain a box profile with a length of approx. 2,680 mm. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: ready for operation (used), Year of construction: 2003, pressing force: 138 t, overall weight: 2,650 kg, Press brake manufactured in 2003. This ATLANTIC HPES-40-135 features a capacity of 135 T and operates at a voltage of 380 V, 50 Hz. It includes a Robosoft ATS 550 control system and has a total weight of 2650 KG. If you are looking to get high-quality bending capabilities, consider the ATLANTIC HPES-40-135 machine we have for sale. Contact us for further details. - Capacity: 135 T- Voltage: 380 V, 50 Hz- Control System: Robosoft ATS 550- Safety Overrun Time: 82 ms- Safety Distance: 200 mm- Included Documentation: Manual/Inspection Log Technical Specification Bending Length 4000 mm Gbjdpfx Aezvmmtjfusu

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available Gjdpozvnfdefx Afusbu

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 2002 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Ie Dkovfv Tfjk Ddfetk Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Gbedpszvrf Isfx Afueu Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: used, mileage: 792,972 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: MB Citaro O530 LE 40+56+1+1 (Vehicle No. 250) First registration: January 29, 2008 752,972 km Engine: 11,967 cc 220 kW / 300 hp Bluetec 5 MOT (TÜV) valid until 09/2026 Permissible total weight: 18,000 kg / 19,000 kg Unladen weight: 11,450 kg Gbodozvtymopfx Afueu Payload: 6,550 kg Overall length: 12,040 mm x overall width: 2,550 mm x overall height: 3,400 mm 40 seats, 56 standing places, 1 wheelchair/walker space, 1 driver's seat Manually folding ramp for strollers/wheelchairs Single door at the front, double door at the rear Fully automatic transmission Microwave Electric windows + mirrors Lawo Topform CU 3 Radio/CD Tachograph Air conditioning + auxiliary heater Retarder Front tires: 275/70R22.5, approx. 40/40% tread remaining; rear tires: 275/70R22.5, approx. 30/30% tread remaining Price: €5,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: excellent (used), Tul-Kelch tool rack SK 40 Tool holder SK 40 Gbsdpfxjy I T S No Afuou 48 slots for SK 40 tools Width 900 mm Depth 450 mm Height 1090 mm

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 10,000 rpm, spindle speed (max.): 20,000 rpm, Fanuc control system 2 tables, 1100 x 600 mm 40-tool changer BT40 spindle Maximum spindle speed: 20,000 rpm Gbodpfx Afey Ndlpeuou 2 chip conveyors

Condition: used, Year of construction: 2015, operating hours: 5,745 h, lifting height: 4,000 mm, free lift: 2,010 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, fork width: 1,140 mm, total height: 2,820 mm, total length: 4,400 mm, total width: 2,030 mm, color: red, Empty weight: 6.800 kg Lifting capacity: 4.000 kg - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: VS517 - Operating hours: 5745 - Lifting capacity: 4000kg - Lifting height: 4000mm - Overhead clearance: 2850mm - Free lift: 2010mm - Fork length: 1200mm - Maximum fork width: 1140mm - Minimum fork width: 290mm - Options: Work lights, Free-lift, Full cabin - Mast: Duplex Gbsdpfx Afsy Ivxreuju - Drive: Diesel - Motor brand: JCB - Driving direction: 2 Road - Transport dimensions: 4400mm x 2030mm x 2820mm (l x w x h) - Transport weight [kg]: 6800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2015, mast type: telescopic, fuel type: diesel, Lifting capacity: 227 kg Gbedozfkt Nepfx Afusu Please contact Gebrauchtgeräte Center for more information

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, Year of construction: 2024, Equipment: ABS, For rent and sale. Price: €44,900 + VAT 2 units in stock 40-foot tipping chassis Own tipping unit, driven via truck batteries 2x lift axle Water tank with soap dispenser Tool box LED lighting Suitable for transporting 40-foot containers for tipping, 1 x 20-foot container centered, or 2 x 20-foot containers. For rent, we offer: 20-foot 2-axle or 3-axle chassis 20-foot tipping chassis 40-foot tipping chassis 40-foot chassis with rear extension 45-foot multi-chassis 18 to 26 m³ rear tipper bodies Gbjdpfxezfykds Afuju Interested? You can request our price list at any time without obligation. We sell tyres and rims for Trucks & Trailers Brands: Fulda, Bridgestone, Petlas Sizes: 315 / 55 R22.5 385 / 55 R22.5 385 / 65 R22.5 All offers are subject to change, non-binding and without guarantee. Errors, modifications, and prior sale reserved.