Used Kemmler Vdi Toolholder for sale (840)

Condition: used, mileage: 500 km, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, loading space length: 73,000 mm, loading space width: 24,900 mm, loading space height: 25,400 mm, Year of construction: 2026, Equipment: ABS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (by phone). !!! 2 UNITS AVAILABLE !!! IVECO AD190S40/P 4x2 Box Truck + Tail Lift Color: White IC 194 Tires: 315/70 R22.5 FUELMAX ENDURANCE S D GOOD YEAR DRIVELINE: Speed limiter 90 km/h, engine speed 2200 rpm, steel rims EXTERIOR CABIN: Electrically adjustable and heated exterior mirrors, manual cab tilting mechanism, flat roof in white, fog lights, front halogen headlights, plastic bumper, first aid kit, front underrun protection for chassis with gross mass over 7,490 kg INTERIOR CABIN: Storage shelf with 2 compartments on the rear wall, digital tachograph 4.1, electronic immobilizer and 2nd vehicle key, manually controlled air conditioning, plastic steering wheel, sunblind for driver’s side window CHASSIS: Emission standard EURO VI E, APU pressure relief to atmosphere, batteries 180 Ah (Heavy) / 170 Ah (Eurocargo) (recommended for tail lift operation and/or PTO), COC EC type approval, chassis frame in grey, generator 2160 Watt (24 Volt x 90 Amps). Recommended for tail lift operation. Hi-TroniX 12TX 1810 TD, steel air tanks depending on suspension and trailer version, air suspension on rear axle, 1-cylinder 352 cc air compressor, standard air tank labels, front stabilizer, standard applications, rear shock absorbers, vertical dry-air filter, wheel chocks, 2 pieces MAIN FEATURES: 50-liter AdBlue tank, 290-liter aluminum fuel tank, heated pre-filter with separator, rear frame overhang 2208 mm FUEL SAVINGS & CONNECTIVITY: Adaptive Cruise Control (ACC), Connectivity Box 4G including TCO service contract, ECO-Switch (switch from Power to Eco mode for TCO optimization via efficiency-optimized engine and transmission settings), Driving Style Evaluation (DSE), gearbox software ECO-Roll (coasting function), optimized A-pillar aerodynamics, VDI interface (Vehicle Data Interface) for telematics (FMS) version 4.0, toll system pre-installation (OBU), includes antenna and dashboard wiring, without receiver SAFETY: Electronic Stability Program (ESP), Lane Departure Warning System (LDWS), Advanced Emergency Braking System (AEBS), hazard warning lights, warning triangle as per ECE-27 directive SPECIAL EQUIPMENT EXTERIOR CABIN Bsdjyfqrgepfx Ad Aolg Mechanical roof hatch, cab air suspension, transparent sun visor mounted externally on cab roof INTERIOR CABIN Luxury driver’s seat, air-suspended, heated, multi-adjustable, right armrest (not on Eurocargo), lumbar support and headrest, with integrated 3-point safety belt, horn behind bumper (air), CHASSIS Battery charging socket, terminals, electric battery isolation switch in cab, reinforced rear anti-roll bar D = 60 mm, electric prewiring for tail lift operation according to VEHH standard, front axle load variant 8,000 kg / rear axle 11,500 kg (technically up to 13,000 kg), reinforced parabolic spring at front axle MAIN FEATURES Trailer coupling, 40 mm, 130 kN, trailer coupling,...

Condition: not inspected (used), Year of construction: 2013, operating hours: 23,758 h, machine/vehicle number: AZ 0170, Very well-maintained and well-preserved CNC lathe SPINNER TC 300-52 SMCY in good condition! ● Terms of delivery: Free loaded onto truck ● Location: 57562 Herdorf ● Availability: Immediately, by arrangement. The exact collection date will be mutually agreed upon and set as binding. Loading will be carried out on this day by our disassembly team on site. Please note that once the date is set, it cannot be postponed. ● Terms of payment: Advance payment - by bank transfer ● Internal reference no.: TM1 ● Under power for inspection: Yes Technical data: Work area: Bodpfx Adsy E Rx Ij Aslg Max. swing diameter: approx. 300 mm Max. turning length: approx. 250 / 200 mm Max. turning diameter: approx. 400 mm Travel: Travel X/Z: 180 / -400 mm Travel Y: +40 / -40 mm Max. rapid traverse X/Z: 15 / 24 m/min TURNING SPINDLE 1: Max. speed: 5000 rpm Chuck size: 210 mm Spindle bore: 52 mm Spindle power: 15 / 19 kW (Siemens + Fanuc) Torque: 96 / 121 Nm (Siemens + Fanuc) TURNING SPINDLE 2: Max. speed: 7000 rpm Chuck size: 130 mm Spindle power: 6 / 8 kW Torque: 38 / 60 Nm TURRET: Number of tools: 12 Tool holder: VDI 25 Live tools: 12 Max. speed: 6000 rpm Power: 3 / 4.6 kW (Siemens) 1 / 1.50 kW (Fanuc) Torque: 9.75 / 14.75 Nm (Siemens) 7 / 31.8 Nm (Fanuc) Scope of delivery: ● Available manuals/documentation ● Collet chucks (2 units, for main and sub spindle) ● Various collets and tool holders including: Collets type 364 E W25 80-5 from Ø 3–22 mm (in 0.5 mm increments) 2 × combination holders (internal and external coolant supply), type EWS 17.2525TDX 105 3 × collet holders EWS 31.2525 DTDX105 2 × Garant twin holders, axial Note: ● The tool holders visible in the turret on the machine are explicitly not included in the scope of delivery! Dimensions & weights: ● Set-up dimensions L x W x H approx.: 2000 × 1600 × 2000 mm ● Weight approx.: 3500 kg Notice: At the end of this listing you will find several pictures of the bar feeder. This is not included in the scope of delivery and can be purchased separately upon request. Additional notes: ► On request, we can offer transportation to your specified location ► The price quoted is net, plus VAT ► The item is sold excluding any warranty ► Technical data without guarantee ► Subject to prior sale ❗ Sale of the item is exclusively to business customers ❗

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm Bsdpfx Adew Ew D Dj Aslg 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, bar diameter (max.): 26 mm, total width: 2,200 mm, total height: 2,200 mm, travel distance X-axis: 78 mm, travel distance Y-axis: 210 mm, overall weight: 2,900 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D with EMCO specials, number of axes: 4, This EMCO Turn 420 MC Plus was manufactured in 2005. It features a maximum turning diameter of 100 mm and a maximum part length of 600 mm. The machine is equipped with a powerful spindle speed range of 0–5000 rpm and a tool changer with 24 stations. If you are looking to get high-quality turning capabilities, consider the EMCO Turn 420 MC Plus multi-spindle turning machine we have for sale. Contact us for further details. • Condition: Very good; connected and ready for testing • Tech specs: • Swing above slide: 160 mm • Main spindle to counter-spindle: 408 mm • Max. turning diameter: 100 mm • Max. part length: 600 mm • Max. bar-stock diameter: 26 mm Bedpfx Aoy E Sp Uod Aelg • Travel: • X/Z: 78 mm • Main spindle: • Max. torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (front ID): 60 mm • Spindle bore: 38 mm • Counter-spindle: • Speed range: 0–5000 rpm • Torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (ID): 60 mm • Clamp length (Ø26 mm): approx. 100 mm • Travel (Z2): 233 mm • C-axis: • Resolution: 0.001° • Rapid traverse: 1000 rpm • Positioning: 3° • Drive power: • Power: 9 kW • Tool changer: • Tool stations: 2 × 12 • VDI shaft: VDI 16 • Tool size (square): 16 × 16 mm • Boring bar diameter: 25 mm • Indexing time: 0.4 sec • Driven tools: • Speed range: 0–5000 rpm • Max. torque: 3 Nm • Max. power: 1.6 kW • Number of tools: 2 × 4 • Feed drives: • Rapid traverse X/Z; X1/Z1: 12/20 m/min • Feed force X: 3000 N • Feed force Z: 3000 N • Acceleration time: 0.1 sec • Coolant system: • Tank capacity: 200 L • Pump power: 0.57 kW • Power consumption: • Connected load: 15 kVA • Supply pressure: 6 bar • Supply rate: 300 L/h • Dimensions: • Center height (top/bottom): 1179 / 1030 mm • Footprint (W × D): 2200 × 1386 mm Additional equipment • Set of accessories and tool holders included Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, maximum load weight: 6,707 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,560 mm, loading space width: 2,480 mm, loading space height: 2,915 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Krone SZK 18 Box Event Mega Black Vehicle Information • Loading length: 13,860 mm • Height: 4,000 mm • Width: 2,550 mm • Internal loading length: 13,560 mm • Internal loading height: 2,915 mm • Internal loading width: 2,480 mm • Fifth wheel height: 950 mm • Permissible total weight: 30,000 kg • Unladen weight: 6,707 kg • Rear portal through-loading height: 2,850 mm _____ Axles • BPW axles with disc brakes Bljdpoxw Iywofx Ad Aog • 445/45 R19.5 • Jost landing gear • ABS • Mechanical axle cap mileage counters • Air suspension • Steel rims • Wheel nuts with protective caps • Wheel chocks _____ Body / Attachments • Plastic toolbox • Box body • Panel thickness: 28 mm • Internal fork lift guard on sides, approx. 320 mm high • 1st lashing rail: 600 mm above floor (center height) • 2nd lashing rail: 1,600 mm above floor (center height) • 3rd lashing rail: 2,200 mm above floor (center height) • Internal locking bars • 3 load securing posts _____ Floor • 30 mm thick waterproof composite floor • Floor load capacity up to 7,000 kg fork axle load • Tear plate recessed at rear in floor plate (4x700mm) • Premium protective coating _____ Lighting / Electrics • Multi-chamber LED rear lights • LED side marker lights with indicator function • 2 outline marker lights with rubber arms, LED version • 2 LED license plate lights • 4 KRONE LED ceiling lights _____ Paintwork • Body: black • Chassis: RAL 9005 deep black • Axle hubs: RAL 9005 deep black _____ • Load securing certificate according to EN 12642 Code XL • Load securing certificate according to Daimler Guideline 9.5 • Load securing certificate for beverage transport (VDI 2700 Sheet 12)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details. • Total hours: 64274 h; Operating hours: 43196 h • Counter spindle: 17 kW; max speed 5000 rpm; max bar diameter 45 (65) mm • CNC controlled axes: • X1: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2 • Z1: stroke 678 mm; rapid 30 m/min; acceleration 5 m/s2 • Y1: stroke 80 (+50/-30) mm; rapid 30 m/min; acceleration 5 m/s2 • X2: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2 • Z2: stroke 640 mm; rapid 30 m/min; acceleration 5 m/s2 • W2: stroke 690 mm; rapid 30 m/min; acceleration 5 m/s2 • Turrets: 2; 12 driven positions per turret; Tool system VDI 30; Max driven tool speed 4000 rpm • Coolant system: tank approx. 650 l; pump capacity per turret 20 l/min; pressure 7 bar • Power supply: 91 kVA • Base machine configuration and functions: • Drive for slide 1 and 2 (all 12 positions) • C-axis for main and counter spindle • Y-axis for slide 1 • Counterspindle collet cleaning with coolant • Mechanical preparation for oil mist filter • Electrical and software interface for bar loader • Angular synchronism between main and counter spindle • Automatic machine shut down • 2 additional on/off outputs (4 M-functions) • Rigid tapping • Piece and time counter • Software for polygonal turning (slide 1 and 2) • Constant cutting speed • Helical interpolation (slide 1) • Spindle speed control • Quadruple warning light • Cooling device for electrical cabinet • Control options: • Tool wear monitoring system (FANUC monitor) • Sister tool selection system (FANUC monitor) Additional equipment • IEMCA MASTER 865 MP 43 L bar feeder • Swarf (chip) conveyor, belt type • Workpiece unloading device including belt • Main spindle collet chuck MPF 65/140 (no axial feed), max Ø 65 mm • Manual collet changer SACO MPT65/140 and MPF65/140 • Counter spindle chuck SMW 175-BBD, incl. adapter • 1 set of soft jaws for SMW 175-BBD • Differential clamping pressure for counter spindle (two selectable pressures) • External flushing of jaws/collets with coolant on main and counter spindle • Various new spare parts available Bedpfx Ajy E Ntkjd Aolg Technical Specification Counter Spindle Yes

Condition: good (used), Year of construction: 2000, operating hours: 61,000 h, functionality: fully functional, spindle bore: 52 mm, overall weight: 5,000 kg, Equipment: rotational speed infinitely variable, For sale is a CNC lathe/turning machine Graziano GT300 (predecessor model of the DMG CTX300) in function-tested condition. Highly reliable and extremely fast machine – ideal for mass production and productive operation. General Data: Control: Fanuc Series 21i-T Axes: X, Z, C and E axis Tool Turret: 12 stations VDI30 mount Tools: static & driven Machining: radial & axial Equipment: ICS (internal coolant supply) Chip conveyor Automatic door Collet chucks & 3-jaw chuck Condition: Used Bjdpfx Adey Hf R Io Ajlg Tested and fully functional ➡️ Additionally available: Comprehensive accessories can also be purchased, including Irco bar feeder (1 m), VDI30 toolholders (static & driven, radial & axial), as well as further equipment. If interested, please get in touch – inspection by arrangement possible.

Condition: used, mileage: 199,999 km, power: 115 kW (156.36 HP), first registration: 06/2012, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 2,700 mm, loading space volume: 20 m³, loading space length: 4,220 mm, loading space width: 2,450 mm, loading space height: 1,900 mm, Year of construction: 2012, Equipment: ABS, soot filter, tail-lift, * Curtain side body, Ewers system * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * Cargo space dimensions: 4,220 x 2,450 x 1,900 mm * 4 rows of load securing rails * Lashing rings integrated in the outer frame * 1,500 kg Bär tail lift * Rear axle with air suspension * Ball head and eye-type trailer coupling with compressed air brake connection Bljdpfx Aex Ix Hfod Asg * Differential lock * 3 seats * 6-speed manual transmission * Euro 5, low noise emission --- Special features: 2-line trailer brake system, Ringfeder trailer coupling, 13-pin trailer socket, audio system: Radio Truckline CD 65 / 70 incl. CD drive, rear axle differential lock, alternator 100 A, compressed air operated engine brake, reinforced rear crossmember, cab seats: hydraulically suspended driver's seat, reinforced rear axle stabilizer, reinforced front axle stabilizer. Further equipment: EURO 5 emission standard, front axle load 2.5 t, heated exterior mirrors, 74 Ah battery, cab: single cab, suspension: leaf / air, 6-speed gearbox, hydraulic steering, body/chassis: chassis, fuel tank: 90 liters, engine: 4.3 L - 115 kW diesel (OM 904 LA), rear fog lamp, wheelbase 3,700 mm, reversing lights, disc brakes rear axle, disc brakes front axle, cab seats: double passenger seat, permissible gross weight 7.49 t.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Gildemeister NEF 320 / Cycle Lathe, Year of manufacture: 1999, Control: Manual Plus, Centre distance: 750 mm, Swing diameter over bed: 320 mm, Spindle speed up to 4,000 rpm, 2 gearbox stages, Multifix toolholder, Tailstock, 2 steadies, Bedpfx Adsy Ev I Uo Aolg Accessories,

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 190 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 660 mm, number of axes: 6, This 9-axis TAKISAWA TM-2000Y2 CNC Horizontal Turning Center was manufactured in 2022. It features a twin turret configuration with dual Y-axis capability, allowing for simultaneous machining. The machine includes a sub-spindle for complete machining and is compatible with bar work. If you are looking to get high-quality turning capabilities, consider the TAKISAWA TM-2000Y2 machine we have for sale. Contact us for further details. • Condition: Demo machine • Running hours: 173 hMachine configuration • Twin turret configuration • Y-axis on both turrets • Sub-spindle included • Main spindle + sub-spindle complete machining • Twin turret simultaneous machining • Dual Y-axis capability • High productivity turning center • Bar work compatibleControlled axes • 9 controlled axes • X1 / Y1 / Z1 • X2 / Y2 / Z2 • C1 main spindle • C2 sub spindle • A-axis (sub spindle movement)Axis travels • Upper Turret (X1 / Y1 / Z1) • X1 travel: 190 mm • Y1 travel: 90 mm (±45 mm) • Z1 travel: 660 mm • Lower Turret (X2 / Y2 / Z2) • X2 travel: 160 mm • Y2 travel: 90 mm (±45 mm) • Z2 travel: 660 mm • Sub-Spindle (A-axis) • A-axis travel: 660 mmMain spindle • 3-jaw chuck: Kitagawa BB206 • Collet chuck: SMW PPBE-42Sub-spindle Bsdpfx Asy Ex E Asd Aslg • 3-jaw chuck: Kitagawa B206 • Collet chuck included (SMW)Machining features • Driven tools included • Simultaneous upper + lower turret machining • Turning / milling / drilling in one setup • Front and back side complete machining • Part transfer between spindlesCoolant / functions • High pressure coolant: 9 bar • Abnormal load detection function • Raku-Raku monitor controller optionIncluded tooling • Static toolholders included • 2 pcs axial rotary toolholders Additional equipment • Bar feeder interface • Remaining bar discharge device • Workpiece unloader with conveyor • Chip conveyor included • Manual tool setter Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2022, condition: ready for operation (used), Optical measurement machine manufactured in 2022. This ZEISS GOM ATOS Q features a scanning principle based on the Triple Scan Principle and utilizes LED structured blue light for precise measurements. If you are looking to get high-quality optical measurement capabilities, consider the ZEISS GOM ATOS Q machine we have for sale. Contact us for further details. • ZEISS ATOS Q – Optical 3D Measuring System • System type: Industrial structured-light 3D scanner • Measuring principle: Fringe projection / Triple Scan technology • Light source: LED with Blue Light Equalizer • Laser pointer for distance adjustment • Cameras: 2 × 8 megapixel CMOS • Camera resolution: 3357 × 2456 pixels • Measuring fields included: • 350 × 260 mm • 170 × 130 mm • Sensor dimensions: approx. 325 × 240 × 90 mm • Sensor weight: approx. 4 kg • Robust industrial housing • Fiber-optic sensor cable connection • Calibration objects with DAkkS certificate • Acceptance test according to VDI/VDE 2634 Sheet 3 • Traceable acceptance certificate • Mobile controller: Converter box with image processing card (fiber optic to Thunderbolt) • External power supply • Workstation (Laptop 7760 Mobile): Intel 2.6 GHz Octa-Core CPU • 64 GB RAM • NVIDIA Quadro graphics card • 17" display • 1 TB SSD • External USB backup drive • WiFi / LAN / USB 3.2 / Thunderbolt • Operating system: Windows 10 (64-bit) • Software: ZEISS Quality Suite • ATOS sensor driver • GOM Inspect • CAD import formats: IGES, STEP, VDA, JT, STL, PLY • Export formats: STL, G3D Bljdpoymmq Uefx Ad Ajg

Condition: good (used), Year of construction: 1965, functionality: fully functional, Turning length/centre distance: 4m, spindle bore diameter, faceplate D 1000 mm, centre height over carriage 360 mm, 2 steady rests with roller jaw guides retrofitted in 1980, main spindle speed 215 - 355 rpm. Operating manual with wiring diagram, chip guard, quick-change toolholder, carriages recently overhauled, electric control box, weight approx. 15 t. Inspection possible under power, including test run. Blodpey Ehntofx Ad Aeg

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, turning diameter over cross slide: 310 mm, turning length: 2,000 mm, turning diameter: 540 mm, spindle bore: 85 mm, spindle speed (max.): 2,250 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 1,850 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Z-axis: 8,000 m/min, total height: 2,235 mm, total length: 3,840 mm, total width: 1,925 mm, quill travel distance: 210 mm, quill diameter: 75 mm, overall weight: 4,200 kg, chuck outer diameter: 315 mm, spindle nose: D1-8, center height: 270 mm, Siemens 828D control with ShopTurn Max. turning diameter over bed: 540 mm Max. turning diameter over carriage: 310 mm Center height: 270 mm Distance between centers: 2000 mm Bsdpey Ey Edsfx Ad Ajlg X / Z-axis travel: 350 / 1850 mm Chuck diameter: 315 mm Spindle bore: 85 mm Spindle speed: 2250 rpm Tailstock quill diameter: 75 mm Tailstock quill stroke: 210 mm Tailstock taper: MT5 Feed rate: 5000 mm/min Rapid traverse X / Z-axis: 5000 / 8000 mm Workpiece weight: - Chuck only: 300 kg - With tailstock: 700 kg - With tailstock and steady rest: 1200 kg Machine dimensions without chip conveyor (L x W x H): 3840 x 1925 x 2235 mm Machine weight: 4200 kg Includes: 2 steady rests, 2 Multifix toolholders, Schunk Rota-S315 3-jaw chuck, chip conveyor, manuals

Condition: new, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. Bodpfx Adswgbuis Aslg - Coolant system.

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 415 mm, turning length: 850 mm, turning diameter: 390 mm, spindle bore: 105 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 1,980 mm, total length: 4,600 mm, total width: 1,900 mm, quill diameter: 100 mm, quill stroke: 120 mm, overall weight: 7,000 kg, bar passage: 90 mm, chuck outer diameter: 300 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: documentation/manual, max. turning diameter 390 mm Z-axis travel: 950 mm max. spindle speed: 2000 rpm AC spindle motor SIEMENS (cont./15min) 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Bodpfx Adsfk Et Ao Aolg Including accessories a. o: SAUTER 12-station turret VDI-40 Trifix holder for driven tools C-axis with spindle clamping and stabilization Wide and stable flat guides 45° inclined bed for optimum chip fall Hinged belt chip conveyor with chip bucket 3-jaw Kitagawa power chuck ø 300 mm Tool measurement can be swiveled in manually Hydraulic tailstock manually adjustable with programmable tailstock quill Coolant unit with powerful pump (4 bar) Rittal filter fan on the control cabinet

Condition: used, Year of construction: 2012, turning diameter 350 mm turning length 650 mm control 840 D SL ShopTurn Siemens greates pass round over bed 385 mm Swing dia. over traverse guideway 350 mm turning speed range - main spindle 0 - 4.500 min/-1 power capacity - main spindel 11,5 / 8 kW max. Torque 340 Nm spindle diameter in front bearing 130 mm spindle bore 87 mm bar material dia. max. 65 mm max. chucking diameter 250 mm spindle head 170 h5 number of toolpositions 12 pos. Shank diameter DIN 69880: 30 mm Number of driven toolspositions 6 pos. Spindle speed - driven tool stations max. 4.500 min -1 Blsdpfx Adey E Tvve Aeg power capacity driven tool-stations 5,5 kW x-axis 255 mm z-axis 800 mm tailstock 680 mm taper of center MK 4 clamping capacity 6,8 kN feed speeds 0 - 30.000 mm/min rapid traverse ( X / Y / Z ) 30 / - / 30 m/min Feed force ( X / Y / Z ) 4,5 / - / 6,2 kN total power requirement 28 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC Universal Lathe GILDEMEISTER - NEF 400 V3 - C-Axis - Tool-Drive - only ca. 8093h Spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI tool holders - incl. 8x tool holders - incl. 4x driven tools (2 radial, 2 axial)

Condition: used, Year of construction: 2019, load capacity: 8,000 kg, lifting height: 4,060 mm, - Bedienung: Sitzgerät - Tragfähigkeit/Last: 8000 kg - Lastschwerpunktabstand: 900 mm - Achslast mit Last vorn/hinten kg 21306/2124 - Achslast ohne Last vorn/hinten kg 7097/8333 - Spurweite vorn/hinten mm 1561/1432 - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/8 ° - Höhe Hubgerüst eingefahren 2710 mm - Kupplungshöhe mm 520/670 - Gabelträger ISO 2328, Klasse/Typ A, B ISO IV A - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4999 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 5199 - Wenderadius mm 3049 - Kleinster Drehpunktabstand mm 877 Bodpfey E Ui Dsx Ad Aolg - Fahrgeschwindigkeit mit/ohne Last km/h 14/17 // 18/20 4 - Hubgeschwindigkeit 5 mit/ohne Last m/s 0,28/0,37 // 0,36/0,48 - Senkgeschwindigkeit 5 mit/ohne Last m/s 0,53/0,42 - Zugkraft mit/ohne Last N 27997/28295 - max. Zugkraft mit/ohne Last N 44000 - Steigfähigkeit mit/ohne Last % 15,5/22,5 - Max. Steigfähigkeit mit/ohne Last % 16,0/23,0 - Beschleunigungszeit (15 m) 5 mit/ohne Last s 7,9/6,8//6,9/6,1 - Betriebsbremse Mechanisch/hydraulisch - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43536 A - Batteriespannung V 80 - Batteriekapazität K5 Ah 1120 (-1240) // 1085 - Energieverbrauch 45 VDI-Arbeitsspiel/Stunde kWh/h 17,7 - Umschlagleistung 5 t/h 456 // 476 - Energieverbrauch bei Umschlagleistung kWh/h 17,2 // 21,9 - Arbeitsdruck für Anbaugerät bar 250 - Ölstrom für Anbaugeräte l/min 60 - Schalldruckpegel LpAZ (Fahrerplatz) 2 dB(A)

Condition: used, Year of construction: 2023, load capacity: 8,000 kg, lifting height: 6,570 mm, fork length: 1,800 mm, total length: 6,150 mm, - Bedienung: Sitzgerät - Tragfähigkeit/Last: 8000 kg - Lastschwerpunktabstand: 900 mm - Achslast mit Last vorn/hinten kg 21306/2124 - Achslast ohne Last vorn/hinten kg 7097/8333 - Spurweite vorn/hinten mm 1561/1432 - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/8 ° - Höhe Hubgerüst eingefahren 2710 mm - Kupplungshöhe mm 520/670 - Gabelträger ISO 2328, Klasse/Typ A, B ISO IV A - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4999 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 5199 - Wenderadius mm 3049 - Kleinster Drehpunktabstand mm 877 - Fahrgeschwindigkeit mit/ohne Last km/h 14/17 // 18/20 4 - Hubgeschwindigkeit 5 mit/ohne Last m/s 0,28/0,37 // 0,36/0,48 Bjdpfx Aoy E Uiqjd Aolg - Senkgeschwindigkeit 5 mit/ohne Last m/s 0,53/0,42 - Zugkraft mit/ohne Last N 27997/28295 - max. Zugkraft mit/ohne Last N 44000 - Steigfähigkeit mit/ohne Last % 15,5/22,5 - Max. Steigfähigkeit mit/ohne Last % 16,0/23,0 - Beschleunigungszeit (15 m) 5 mit/ohne Last s 7,9/6,8//6,9/6,1 - Betriebsbremse Mechanisch/hydraulisch - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43536 A - Batteriespannung V 80 - Batteriekapazität K5 Ah 1120 (-1240) // 1085 - Energieverbrauch 45 VDI-Arbeitsspiel/Stunde kWh/h 17,7 - Umschlagleistung 5 t/h 456 // 476 - Energieverbrauch bei Umschlagleistung kWh/h 17,2 // 21,9 - Arbeitsdruck für Anbaugerät bar 250 - Ölstrom für Anbaugeräte l/min 60 - Schalldruckpegel LpAZ (Fahrerplatz) 2 dB(A)

Condition: used, Year of construction: 2007, load capacity: 4,990 kg, lifting height: 6,450 mm, total length: 5,045 mm, - Bedienung Sitz - Tragfähigkeit 5,0to - Lastabstand 535 mm - Achslast vorn mit Last 11547 kg - Achslast hinten mit Last 1154 kg - Achslast vorn ohne Last 3845 kg - Achslast hinten ohne Last 3866 kg - Bereifung SE - Räder, Anzahl vorn (x = angetrieben) 2x - Räder, Anzahl hinten (x = angetrieben) 2 - Spur vorn mm 1104 - Spur hinten mm 920 - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 6 - Kupplungshöhe mm 546/421 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4284 - Arbeitsgangbreite bei Palette 800 x 1200 längs - Wenderadius 2549 mm - Kleinster Drehpunkt 638 mm - Fahrgeschwindigkeit mit Last km/h 18 - Fahrgeschwindigkeit ohne Last km/h 19 - Hubgeschwindigkeit mit Last m/s 0,31 - Hubgeschwindigkeit ohne Last m/s 0,44 - Senkgeschwindigkeit mit Last m/s 0,55 - Senkgeschwindigkeit ohne Last m/s 0,46 - Zugkraft mit Last N 3600 - Zugkraft ohne Last N 4400 - Max. Zugkraft mit Last N 15670 - Max. Zugkraft ohne Last N 16090 - Beschleunigungszeit mit Last s 5,4 - Beschleunigungszeit ohne Last s 4,7 Bedoy E Ugvjpfx Ad Aolg - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Batteriespannung V 80 - Energieverbrauch 60 VDI-Arbeitsspiele/Stunde kWh/h 12,1 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30 - Schallpegel, Fahrerohr dB (A)

Condition: used, Year of construction: 2022, load capacity: 8,000 kg, lifting height: 6,620 mm, total length: 5,910 mm, - Bedienung: Sitzgerät - Tragfähigkeit/Last: 8000 kg - Lastschwerpunktabstand: 900 mm - Achslast mit Last vorn/hinten kg 21306/2124 - Achslast ohne Last vorn/hinten kg 7097/8333 - Spurweite vorn/hinten mm 1561/1432 - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/8 ° - Höhe Hubgerüst eingefahren 2710 mm - Kupplungshöhe mm 520/670 - Gabelträger ISO 2328, Klasse/Typ A, B ISO IV A - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4999 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 5199 - Wenderadius mm 3049 - Kleinster Drehpunktabstand mm 877 - Fahrgeschwindigkeit mit/ohne Last km/h 14/17 // 18/20 4 - Hubgeschwindigkeit 5 mit/ohne Last m/s 0,28/0,37 // 0,36/0,48 - Senkgeschwindigkeit 5 mit/ohne Last m/s 0,53/0,42 - Zugkraft mit/ohne Last N 27997/28295 - max. Zugkraft mit/ohne Last N 44000 Bljdpfx Adey E Uffe Aog - Steigfähigkeit mit/ohne Last % 15,5/22,5 - Max. Steigfähigkeit mit/ohne Last % 16,0/23,0 - Beschleunigungszeit (15 m) 5 mit/ohne Last s 7,9/6,8//6,9/6,1 - Betriebsbremse Mechanisch/hydraulisch - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43536 A - Batteriespannung V 80 - Batteriekapazität K5 Ah 1120 (-1240) // 1085 - Energieverbrauch 45 VDI-Arbeitsspiel/Stunde kWh/h 17,7 - Umschlagleistung 5 t/h 456 // 476 - Energieverbrauch bei Umschlagleistung kWh/h 17,2 // 21,9 - Arbeitsdruck für Anbaugerät bar 250 - Ölstrom für Anbaugeräte l/min 60 - Schalldruckpegel LpAZ (Fahrerplatz) 2 dB(A)

Condition: used, Year of construction: 2022, load capacity: 8,000 kg, lifting height: 3,120 mm, total length: 5,450 mm, - Bedienung: Sitzgerät - Tragfähigkeit/Last: 8000 kg - Lastschwerpunktabstand: 900 mm - Achslast mit Last vorn/hinten kg 21306/2124 - Achslast ohne Last vorn/hinten kg 7097/8333 - Spurweite vorn/hinten mm 1561/1432 - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/8 ° - Höhe Hubgerüst eingefahren 2710 mm - Kupplungshöhe mm 520/670 - Gabelträger ISO 2328, Klasse/Typ A, B ISO IV A - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4999 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 5199 - Wenderadius mm 3049 - Kleinster Drehpunktabstand mm 877 - Fahrgeschwindigkeit mit/ohne Last km/h 14/17 // 18/20 4 - Hubgeschwindigkeit 5 mit/ohne Last m/s 0,28/0,37 // 0,36/0,48 - Senkgeschwindigkeit 5 mit/ohne Last m/s 0,53/0,42 - Zugkraft mit/ohne Last N 27997/28295 - max. Zugkraft mit/ohne Last N 44000 - Steigfähigkeit mit/ohne Last % 15,5/22,5 - Max. Steigfähigkeit mit/ohne Last % 16,0/23,0 - Beschleunigungszeit (15 m) 5 mit/ohne Last s 7,9/6,8//6,9/6,1 - Betriebsbremse Mechanisch/hydraulisch - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43536 A - Batteriespannung V 80 - Batteriekapazität K5 Ah 1120 (-1240) // 1085 - Energieverbrauch 45 VDI-Arbeitsspiel/Stunde kWh/h 17,7 - Umschlagleistung 5 t/h 456 // 476 - Energieverbrauch bei Umschlagleistung kWh/h 17,2 // 21,9 - Arbeitsdruck für Anbaugerät bar 250 Bjdpoy E Ud Usfx Ad Aolg - Ölstrom für Anbaugeräte l/min 60 - Schalldruckpegel LpAZ (Fahrerplatz) 2 dB(A)

Condition: used, Year of construction: 2023, load capacity: 8,000 kg, lifting height: 4,500 mm, fork length: 1,800 mm, total length: 5,360 mm, - Bedienung: Sitzgerät - Tragfähigkeit/Last: 8000 kg - Lastschwerpunktabstand: 900 mm - Achslast mit Last vorn/hinten kg 21306/2124 - Achslast ohne Last vorn/hinten kg 7097/8333 - Spurweite vorn/hinten mm 1561/1432 - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/8 ° - Höhe Hubgerüst eingefahren 2710 mm - Kupplungshöhe mm 520/670 - Gabelträger ISO 2328, Klasse/Typ A, B ISO IV A - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4999 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 5199 - Wenderadius mm 3049 - Kleinster Drehpunktabstand mm 877 - Fahrgeschwindigkeit mit/ohne Last km/h 14/17 // 18/20 4 - Hubgeschwindigkeit 5 mit/ohne Last m/s 0,28/0,37 // 0,36/0,48 - Senkgeschwindigkeit 5 mit/ohne Last m/s 0,53/0,42 - Zugkraft mit/ohne Last N 27997/28295 - max. Zugkraft mit/ohne Last N 44000 - Steigfähigkeit mit/ohne Last % 15,5/22,5 - Max. Steigfähigkeit mit/ohne Last % 16,0/23,0 - Beschleunigungszeit (15 m) 5 mit/ohne Last s 7,9/6,8//6,9/6,1 - Betriebsbremse Mechanisch/hydraulisch Bledpfx Adjy E Udze Aeg - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43536 A - Batteriespannung V 80 - Batteriekapazität K5 Ah 1120 (-1240) // 1085 - Energieverbrauch 45 VDI-Arbeitsspiel/Stunde kWh/h 17,7 - Umschlagleistung 5 t/h 456 // 476 - Energieverbrauch bei Umschlagleistung kWh/h 17,2 // 21,9 - Arbeitsdruck für Anbaugerät bar 250 - Ölstrom für Anbaugeräte l/min 60 - Schalldruckpegel LpAZ (Fahrerplatz) 2 dB(A)

Condition: used, mileage: 513,908 km, power: 309 kW (420.12 HP), first registration: 02/2018, fuel type: diesel, empty load weight: 9,580 kg, maximum load weight: 16,420 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, parking heater, traction control, trailer coupling, CERTIFIED PRE-OWNED standard, color Pure White IC 082, unladen weight: 9,580 kg, gross vehicle weight: 26,000 kg, 1st axle: 315/70 R22.5, 2nd axle: 315/70 R22.5, fabric seats, interior color grey, leaf-air suspension, lift axle, Intarder: ZF, digital tachograph, towing hitch (jaw-type), BDF swap chassis, electronic braking system (EBS), brake assist, electronic stability program (ESP), traction control (ASR), automatic climate control, stationary air conditioning, adaptive cruise control (ACC), auxiliary heater with programmable timer, comfort driver/passenger seats, air-suspended driver/passenger seats, height-adjustable driver/passenger seats, driver/passenger armrests, driver seat heating, headlamp washer, radio/CD, multi-function display, AUX & USB port, Bluetooth hands-free system, lane departure warning, multifunction leather steering wheel, power steering, adjustable steering column, driver lumbar support, alloy wheels: Alcoa, electric windows (2x), outside temperature display, fog lights, electrically adjustable and heated exterior mirrors, kerb mirror, wide-angle mirror, tire pressure monitoring, immobilizer, central locking with remote control, rear differential lock, underrun protection, sun visor, twin tires, fire extinguisher holder (2x), hill start assist (Hill Holder), LED daytime running lights, 1x 15-pin connector, cup holder, sailing function (ECO-Roll), telematics system pre-installation, speed limiter: 90 km/h, driver seat ventilation, voltage converter: 24V/12V, emergency brake assist, lower bunk, suspended cab, ECOSWITCH, VDI interface for telematics systems, ADR electric battery cut-off switch, left-side air connections (ISO-DuoMatic) on plate, lift for front axle (fixed), AdBlue tank heating, OBU pre-installation, driving style analysis (DSE) and driver fatigue detection (DAS), payload 16,420 kg. VEHICLE LOCATION: 90441 NÜRNBERG, DIESELSTRASSE 65 Bodpfxsywpm Ij Ad Aslg Your contact: Mr. Bächer, Tel. (number), Subject to errors and changes.

Condition: ready for operation (used), Year of construction: 2018, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 2,800 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 3,450 mm, number of axes: 4, This 4-axis EMCO EMCOTURN E65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and offers driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOTURN E65 turn-mill centre we have for sale. Contact us for further details regarding this machine. • Work area: • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm Bedpoy Enr Esfx Ad Aslg • Main spindle (belt driven): • Torque (40% DC): 305 Nm • Spindle nose: A2-6 • Bearing Ø: 105 mm • Spindle bore: Ø73 mm • Max. chuck size: Ø250 mm • Counter spindle: • Speed: 60–5000 rpm • Power (40% DC): 11 / 16.5 kW • Torque (40% DC): 80 / 125 Nm • Spindle nose: A2-6 • Spindle bore: Ø73 mm • Max. chuck: Ø200 mm • C-axis: • Resolution: 0.001° • Rapid speed: 100 rpm • Turret (VDI30): • Tool stations: 12 • Driven tools: yes • Max. speed: 5000 rpm • Max. power: 6.7 kW • Max. torque: 25 Nm • Indexing time: 0.2 s • Rotary tools (VDI30): • Speed: 0–5000 rpm • Torque: 25 Nm • Power: 6.7 kW • Feed drives: • Rapid traverse (X/Y/Z): 30 / 15 / 30 m/min • Feed thrust X: 5000 N • Feed thrust Z: 7000 N • Acceleration: 0.4 m/s² • Tailstock: • Travel: 500 mm • Force: 8000 N • Taper: MT4 • Coolant system: • Tank capacity: 230 l • Pump power: 0.57 / 2.2 kW • Pressure: 3.5 bar (optional 14 bar) • Flow rate: 15 / 65 l/min • Hydraulic unit: • Tank: 10 l • Max. pressure: 50 bar • Pneumatics: • Pressure: 6 bar • Air consumption: 5 l/min • Power supply: • Voltage: 3x400V • Frequency: 50/60 Hz • Connected load: 25 / 39 kVA • Noise level: • Average: 75 dB(A) • Key features: • C-axis main spindle • Driven tools • Hydraulic tailstock • ShopTurn programming • USB + Ethernet • 15" touchscreen + 3D simulation • CE documentation Additional equipment • Bar feeder: EMCO SL1200 • Bar diameter: 8–95 mm • Bar length: 150–1200 mm • Feed rate: 60 m/min • Capacity: 10 bars Ø55 mm / 70 bars Ø8 mm • Weight: ~500 kg • Collet chuck: HAINBUCH BZI 100 (A2-8) • Max. capacity: Ø100 mm • Incl. part stop • Max. speed: 5000 rpm • Parts catcher: • Max. length: 175 mm • Max. diameter: 65 mm (optional 95 mm) • Max. weight: 4.5 kg • Chip conveyor: • Length: 1200 mm • Suitable for: long chips, snarled chips, dry & wet machining • Coolant pistol (Multiflow): • Adjustable jet + solenoid valve • Magnetic holder + spiral hose Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, total height: 1,750 mm, total width: 1,850 mm, overall weight: 3,800 kg, product length (max.): 2,850 mm, number of axes: 2, Horizontal turning machine manufactured in 2004. This Weiler E55X1000 features a maximum chuck diameter of 315 mm and a spindle diameter of 120 mm. It includes a robust tool system with a turret and offers a cutting speed of 140 m/min. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details. • 20 kW = real power (mechanical/electrical output) • 27 kVA = apparent power (includes reactive power) • Internal taper: metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Max. faceplate diameter: 500 mm • Maximum chuck diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: turret (VDI 40) • Tool shank size: 32 x 25 mm • Number of longitudinal slides: 1 • Number of cross slides: 1 • Center distance: 1100 • Cross travel: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Feed rate longitudinal: 0.001 – 20 mm/rev • Feed rate cross: 0.001 – 20 mm/rev • Rapid traverse longitudinal: 10 m/min • Rapid traverse cross: 5 m/min • Feed force longitudinal: 10000 N • Feed force cross: 7000 N • Metric thread range: 0.1 – 250 mm • Whitworth thread range: 1/4 – 56 threads/inch • Module range: 0.125 – 28 • DP range: 0.05 – 48 • Maximum cutting cross section: 2.25 mm² Bsdpey Em Avjfx Ad Ajlg • Cutting speed: 140 m/min • Gear stage I: 89 rpm at 100% duty cycle • Gear stage II: 355 rpm at 100% duty cycle • Coolant consumption (normal): 30 l/min at 0.4 bar • Coolant consumption (increased): 30 l/min at 3.5 bar • Noise level: 80 dB(A) • Electrical: • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: A small actuator that switches between the gear stages is defective; both gear stages are functioning. Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No