Used Kleinteilereiniger P100 Parts Cleaner for sale (14,650)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 3 h, functionality: fully functional, operating pressure: 500 bar, total length: 1,100 mm, high-pressure hose length: 10,000 mm, total height: 1,130 mm, total width: 700 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 400 kg, input voltage: 400 V, fuel: electricity, overall weight: 400 kg, warranty duration: 12 months, power: 30 kW (40.79 HP), input current: 63 A, water pressure: 500 bar, Equipment: chassis, The CLENA H5031 series offers maximum robustness and durability and is designed for the most demanding industrial environments and construction sites. With a flushing capacity of 30 liters per minute at a water pressure of 500 bar, these machines deliver impressive results, for example, when shot-blasting concrete or cleaning tanks. Includes accessories: - 10 m high-pressure hose DN10, with kink protection on both ends Pedpjzd Tx Sefx Aipjgp - HP500 Soft CL high-pressure gun with a swivel joint at the inlet - CL lance with nozzle protection, including a high-pressure nozzle

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, operating pressure: 500 bar, total length: 860 mm, high-pressure hose length: 10,000 mm, total height: 1,100 mm, total width: 600 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 150 kg, input voltage: 400 V, fuel: electricity, overall weight: 150 kg, warranty duration: 12 months, power: 15 kW (20.39 HP), input current: 63 A, Equipment: chassis, Designed for professional use in industry, the CLENA H series is available in a variety of pressure and flow combinations, up to 500 bar and 21 l/min. This allows for precise adaptation to every customer requirement. These machines are designed for continuous operation in demanding cleaning tasks where no compromises can be made. Includes accessories: - 10 m high-pressure hose DN10, with kink protection on both sides - HP500 Soft CL high-pressure gun with swivel joint at the inlet - CL spray lance with nozzle protection, including high-pressure nozzle Dimensions: 860 x 600 x 1100 Weight: 150 Available models: H9318 | 350 bar | 18 l/min | 11.0 kW H9330 | 200 bar | 30 l/min | 11.0 kW H9335 | 170 bar | 35 l/min | 11.0 kW H9340 | 150 bar | 40 l/min | 11.0 kW Podpfezd Tuyox Aipsgp H9415 | 500 bar | 15 l/min | 15.0 kW H9418 | 400 bar | 18 l/min | 15.0 kW H9421 | 350 bar | 21 l/min | 15.0 kW H9425 | 300 bar | 25 l/min | 15.0 kW H9430 | 250 bar | 30 l/min | 15.0 kW H9435 | 225 bar | 35 l/min | 15.0 kW H9440 | 200 bar | 40 l/min | 15.0 kW H9450 | 170 bar | 50 l/min | 15.0 kW H9521 | 500 bar | 21 l/min | 18.5 kW H9560 | 170 bar | 60 l/min | 18.5 kW Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc.

Condition: good (used), amount Komplett SET Various V-belts, timing belts, and clamping hoses as a set Pgodjzf Npvepfx Aipjp

Condition: new, ZAB0-0100-0012, MC002X2_42, Applied Materials Electric Motor Active Part - New Model: ZAB0-0100-0012 Type: MC002X2_42 Pjdsq S Tiaepfx Aipogp Condition: New

Condition: new, ZAB0-0100-0013, MC002X2_42, Applied Materials E-motor Passive Part Rev.0 - New Model: ZAB0-0100-0013 Type: MC002X2_42 Condition: New Pgsdjq S Th Sjpfx Aipep

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 3820221000205, overall weight: 139 kg, total width: 600 mm, total length: 1,130 mm, total height: 1,530 mm, input voltage: 400 V, type of input current: three-phase, power: 4 kW (5.44 HP), Nilfisk Three-Phase Industrial Vacuum Cleaner T40W LP FM The three-phase industrial vacuum cleaners T40W are designed for demanding cleaning tasks in commercial and industrial environments. This wet and dry vacuum cleaner comes equipped with a powerful side channel blower, making it suitable for continuous operation. T40W LP FM The three-phase industrial vacuum cleaners T40W are built for heavy-duty cleaning applications in commercial and industrial settings. This wet/dry vacuum features a robust side channel blower and is intended for continuous use. Psdpfx Asymx Huoipegp Suitable for deployment in the metal and chemical industries, construction, rubber, plastics, and porcelain processing industries, food sector, textile industry, packaging area, as well as all types of workshops. The rugged and durable all-steel construction with powder coating ensures a very high standard of quality. Thanks to a compact chassis with large wheels and swivel casters, the industrial vacuum is easy to maneuver. High-quality star filters with long service life guarantee excellent filtration performance, even for fine or problematic dusts. The very ergonomic handling, thoughtfully designed emptying options with 50-liter or 100-liter waste containers or Longopac, and manual filter cleaning make the T40W industrial vacuums efficient cleaning tools for plant or machine cleaning. In addition to solid materials, liquids or oils can also be vacuumed. The quiet, maintenance-free 4.0 kW three-phase motors are designed for continuous operation. The T40W provides increased air performance.

Condition: excellent (used), 305 USED Jeros Sheet Metal Cleaner for 58x78 sheets (sheets without edges or with two edges on the short sides) TECHNICAL DATA: - Power: 1.5 kW EXTERNAL DIMENSIONS (in cm): - Working width: 78. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Pgodpfeyi Eqlex Aipop

Condition: excellent (used), Trumpf Vectormark Laser Engraver – Source for Spare Parts Here, we offer a Trumpf Vectormark laser engraver. Trumpf Vectormark, Trumpf VMc2 Type: VMc2 Condition: Source for spare parts Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone. Psdpjzdrpisfx Aipegp

Year of construction: 1987, condition: new, New original spare parts Huta Zigmunt 3 500 … 17 500 kgm. Pjdelnlmvspfx Aipegp

Condition: used, Installation of power converter for switching and rectification Pgsdpfx Aszdu S Tjipsp The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, functionality: fully functional, - New ball slewing ring - Outer diameter 1100 mm - Inner diameter 878 mm - Height 50 mm Pgodpewt Ry Usfx Aipsp - 8 x M16 mounting holes - Renowned German manufacturer - Suitable for VK 26 models - Available immediately

Condition: used, Year of construction: 2001, We are selling grinding and regulating wheel spindles for a Lidköping CL 630. The machine is no longer for sale! Only the spindles 6x regulating wheel spindles Pjderf Ukqspfx Aipsgp 8x grinding wheel spindles Individually or in a package

Condition: new, Year of construction: 2025, functionality: fully functional, power: 34 kW (46.23 HP), input voltage: 380 V, Equipment: documentation/manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure slip-free transport. Panel conveyor The long, heat-treated semicircular guide rail allows perfect contact with the conveyor, without play. The conveyor is fixed to the machine body for stability of wide panels, with a maximum extension width of 600mm. Package for narrow parts Feeding package for narrow parts, ensuring the minimum edge width is 40 mm. Pre-milling unit Pre-milling with 2 diamond cutters, 43mm height. Two pneumatically controlled motors (2 x 3.7kW), intermittent edge milling of the panel. Panel pre-heating unit x2 Heats the panel edge so that the adhesive melts correctly, ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel edge for better bonding. Edge band support x2 The large support is at an appropriate height for easy feeding and long service life. Edge cutting unit x2 Pneumatically operated guillotine with electric switch for accurate cutting of the edge band at the end. Premelting gluing unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps the adhesive fresh. Automatic adhesive pumping + 25kg tank Adhesive is automatically pumped into the upper reservoir when the level drops below the sensor. Edge cutting unit Pneumatically operated guillotine with electrical switch for correct end-cutting of the edge band. 2 sets of pressure rollers A 100mm pre-pressing roller in coordination with four rear rollers ensures firm bonding. Lubrication system Lubrication pump for daily maintenance, lubricates the guide rail by simply actuating the lever. End trimming unit Structure with linear guide at 45 degrees, with 2 motors of 0.35kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is practically zero. Diamond knives R1.5. Corner rounding unit Designed for rounding the edge band on the ends and lengthwise, achieving a circular radius R. 2 sets of scraping units with pneumatic actuation Two sets with different circular radius knives (one set with R1.5, the other with R1). Extraction system Each unit has its own independent extraction outlet (125mm), totaling 6 outlets. Straight glue cleaning scraping group Removes edge band residues, followed by straight scraping to remove excess adhesive from the top and bottom surfaces. Spraying unit - cleaning agent Separation agent before pre-milling, preventing adhesive from sticking to the panel surface. 2 sets of polishing units Intended for 2 adhesive colors (dark and light) to avoid contamination. Solution for narrow pieces Allows processing of parts with the following sizes: 120x120mm (4 sides), 200x40mm (long side), 40x200mm (short side). Additional conveyor roller Solid support for large or in-line panels. PUR Device 2KG/20KG – 6500 EUR + VAT Temperature control system via touch screen and uniform heating. Polyurethane-based (PUR) adhesive technology ensures superior bonding performance. Pgedpfx Aijy Rlbnjpsp

Condition: ready for operation (used), functionality: fully functional, Beach cleaner: Beach cleaner: - Legiret Geomonier - Type 028L - Trailed variant - Tractor attachment - fully galvanized Pgedpst Rgknsfx Aipjp - Working width 250cm - jockey wheels - Rake - sieve Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: new, Spare parts, accessories, and expert support for your GUBISCH machines. Pgodpfxozdglgo Aipjp

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Complete series plate NG16 and loose parts R901190435 9000004130 BOSCH REXROTH Psdpfx Aszd Nyxeipjgp

Condition: excellent (used), Year of construction: 2019, We are offering this very well-maintained Ruwac W151EX vacuum cleaner, manufactured in 2019. Manufacturer: Ruwac Model: W151EX Year of manufacture: 2019 Pjdpfxozc Iiqj Aipegp Condition: very good Type: vacuum cleaner If you have any questions or would like more information, please send us a message or call us.

Condition: used, functionality: fully functional, overall weight: 3,860 kg, color: grey, operation weight: 3,440 kg, empty load weight: 3,440 kg, loading space volume: 2.6 m³, Year of construction: 2018, Beach cleaner: - Canicas - T230 - Built in 2018 - Fully galvanized - PTO drive (540 or 1,000 rpm) - 5990mm x 2550mm x 2600mm (L x W x H) - Empty weight: 3,440kg; Gross vehicle weight: 3,860kg - Tipping container 2,600l, max. unloading height 2,600mm Pgodpsv S Urmofx Aipep - Smoother - Rake - Working width: 2,200mm - Max. working depth 300mm - Area performance: 32,000m²/hour - First-hand municipal equipment Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Year of construction: 2026, condition: excellent (used), functionality: fully functional, Optima Steamer XD – Diesel steam cleaner 1-year warranty 2 steam outlets Accessories included New unit Psdjy Hlbmopfx Aipsgp Available for immediate delivery 0 operating hours

Condition: like new (used), Year of construction: 2016, operating hours: 1,275 h, functionality: fully functional, machine/vehicle number: W09FAL226GMF14035, operating pressure: 2,500 bar, total length: 3,750 mm, high-pressure hose length: 2,000 mm, total height: 2,040 mm, total width: 1,980 mm, empty load weight: 1,980 kg, fuel: diesel, Equipment: chassis, Falch Trailer Tandem Trail Jet 125, equipment can also be sold individually. ATTENTION: A sedimentation system, model cont. sed 100.100 from Falch, can be purchased separately; price upon request. Extensive accessories, see photos. Used Falch Trail Jet 125 high-pressure cleaner with a working pressure of 2500 bar. The unit is in very good technical condition and ready for use. The following components are included with the unit: Psdpfezdy Imsx Aipegp - 3 high-pressure hoses from Falch, 1 loose, 2 on the frame - 1 control line for connecting the Falch gun - 2 rotating 4-nozzle heads from Falch - Falch spray gun - Whel Fan 2, year of manufacture 2020 - Floor cleaner Scater 25 260 vc - Additional accessories for the machine: seal kits, filters, etc. Technical data: Year of manufacture 2016, with only 1275 operating hours. The unit allows adjustment of the working pressure.

Condition: used, Pneumatic Vibratory Feeder, Explosion-Proof Vibrating Trough, Pneumatic Vibratory Conveyor, Used Machine Manufacturer: NetterVibration Type: Netter NTK Pjdezat Eljpfx Aipegp Overall dimensions: Width: 950 mm Depth: 430 mm Height: 1340 mm Trough dimensions: Discharge opening size: 155 × 125 mm Width: 670 mm Depth: 420 mm Height: 250 mmPneumatic Vibratory Feeder, Explosion-Proof Vibrating Trough, Pneumatic Vibratory Conveyor, Used Machine Manufacturer: NetterVibration Type: Netter NTK Overall dimensions: Width: 950 mm Depth: 430 mm Height: 1340 mm Trough dimensions: Discharge opening size: 155 × 125 mm Width: 670 mm Depth: 420 mm Height: 250 mm

Condition: used, Manufacturer: BONINO Type.: VD4N Sizes: D650x400 mm Electrical power: 220V; 2,0 A Pjdpjyyhy Sefx Aipsgp Power: 0,5 kW; 3000 cycles/min

Condition: used, Vibrating feeder, vibrating track, vibrating parts feeder, linear vibrating feeder, RNA SLL400-400, Used machine Manufacturer: RNA Type: SLL400-400 Overall dimensions: Width: 675 mm Depth: 690 mm Height: 1600 mm Pgjdpfoyrti Isx Aipep Electrical data: 230V; 0.60A; 120VA Hopper size: 500 x 495 mm Vibrating track size: 500 x 100 x 70 mm

Condition: used, Vibratory bowl feeder, circular feeder, vibratory part feeder Gasco BVN5 470mm, Used machine Gyártó : Gasco Típus : BVN5 Befoglaló méret : 545 x 555 x 400 mm Vályú, Edény méret D, d : 490 mm, 250 mm Súly : 61 kg Pedpsy Sbq Iofx Aipjgp Elektromos adatok : 230 V, 1,6 A

Condition: good (used), Year of construction: 2001, Loader with 3 units for: 1) left -> end cut with 1 saw blade 2) right –> milling or drilling 3) left and right –> sanding piece heads with continuous abrasive belt and profiled pads Podpfxjvxqh De Aipjgp Sanding machine with - No. 2 upper horizontal sanding belts - No. 2 lower horizontal sanding belts - No. 2 right vertical sanding belts - No. 2 left vertical sanding belts - No. 2 orbital sanders - No. 2 Camam robots mod. NTTR for handling pieces - No. 2 Camam brushing heads mod. SAW 91 - Return connection belts to the operator - With cabin - CE norms Technical characteristics: • maximum length of pieces to be sanded 1,200 mm • Minimum length 380 mm (350 mm without orbital sanding) • Abrasive belt dimensions: 3,700 x 90 mm • Maximum curvature of pieces 120 mm