Used Kleiser Und Lösch 9921 for sale (5,496)

Condition: used, Year of construction: 1997, Engel ES 4550/650 Year of manufacture: 1997 Weight: 44,000 kg Clamping force: 6,500 kN / 650 t Dimensions: 2,600 x 11,300 mm (W x L) Control system: CC100 Design: Tie-bar The machine is still in operation and has been maintained at short intervals during production. It remains connected and is fully functional. Viewing and testing on site is possible. Complete documentation is available. The machine is equipped with a Sepro “Success 33” linear extraction robot. Technical specifications: Iiodpfx Apeyu Rzyecoa Operating voltage: 400 V 3~ 50 Hz Screw diameter: 90 mm Max. dosing stroke: 390 mm L/D ratio: 22 Nozzle thread: M45x3 Shot weight (PS): 2,331 g Tie bar spacing (horizontal): 1,025 mm Tie bar spacing (vertical): 925 mm Max. opening stroke: 900 mm Min. mould height: 400 mm Max. mould height: 920 mm Engel ES 330/80 Year of manufacture: 1991 Weight: 4,000 kg Clamping force: 800 kN Dimensions: 3,910 x 1,380 x 2,050 mm (L x W x H) Control system: CC100 Design: Tie-bar, toggle lever The machine is in good condition and has been maintained at short intervals during production. It remains connected and is fully functional. Viewing and testing on site is possible. Complete documentation is available. Screw, heating cylinder tube, and RSP were replaced in 2022 by Plasma Kunststofftechnik. Technical specifications: Operating voltage: 400 V 3~ 50 Hz Screw diameter: 45 mm Screw geometry: 3-zone Max. dosing stroke: 160 mm Nozzle thread: M28x1.5 Max. injection pressure: 1,300 bar Shot weight (PS): 239 g Tie bar spacing (horizontal): 405 mm Tie bar spacing (vertical): 345 mm Max. opening stroke: 430 mm Min. mould height: 150 mm

Condition: used, Year of construction: 2002, Deckel Maho DMF 250 linear Type: VRF 250 / 1250 Year of manufacture: 2002 Operating hours: 18,696 h Defects: Z-axis brake defective, machine enclosure shutter defective, monitor cable defective. Deckel Maho DMC 63 H Installed weight: 18 t Ijdpjyu Rx Sjfx Apcsia Dimensions: 6.6 m x 6 m x 3.2 m Year of manufacture: 2002 Machine damage: System does not boot up anymore. Photos of the error message are attached. No other damages known.

Condition: used, Year of construction: 1994, For sale: one Charmilles Robofil 2020, year 1994, fully operational, and one Charmilles Robofil 4020 SL as a spare parts machine. The Robofil 2020 is still in use in production. The Robofil 4020 SL is no longer operational but can be used for spare parts. Ijdpfxsyu Rv De Apceia

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 17,592 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 32,700 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,050 mm, Diesel Forklift Load Centre: 1200 Fork Width: 200 mm Fork Thickness: 110 mm Mast Type: Standard Transmission: NEW Condition: Ready for use and fully functional Technical Condition: Very good Front Tyres Type: Pneumatic Front Tyres Size: 14.00-24 Rear Tyres Type: Pneumatic Rear Tyres Size: 14.00-24 Description: In addition to this Konecranes model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Leasing & financing at attractive rates are always available. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide detailed advice on this SMV20-1200B. Isdpfeu Dzq Rex Apcsia P.S.: Our forklift master workshop specialises in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Sideshift, fork positioner, Heater, full cab, air conditioning, NEW ENGINE AND TRANSMISSION

Condition: good (used), functionality: fully functional, Saw bushings DK14 Iodoxq R Rxopfx Apceia Saw bushings DK16

Condition: excellent (used), Ice cream press, shaper, spaghetti ice cream press, ice cream press cup -made of stainless steel tube: Ø 79 mm -Shape: Spaghetti 44 pieces available -Holes: Ø 3 mm -Shape: wide pasta, tagliatelle, lasagne, 24 pieces available -Slot: 4 x 49 mm -Price per piece -External dimensions: 160/79/H78 mm -Weight: 0.45kg Ijdpfxsc H S D Is Apcsia

Condition: used, maximum load weight: 29,200 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/1997, next inspection (TÜV): 08/2023, Equipment: ABS, * ABS Iiedou I H D Ropfx Apcoa * Alloy wheels * Front landing gear * Steering axle * BPW ECO axles * 5-chamber tail lights ----Construction: cement silo trailer (for granular and dusty goods), capacity: 40,000 ltr, next external inspection 11/24, next internal inspection 11/25, max. permissible pressure 2.0 bar, permissible temperature min/max -40/+80 degrees, 4 sliding dome covers with pneumatic locking, 2 outlets lockable, 4 inch material line collected to the left----3rd axle steering axle Sale only to traders. FOR EXPORT ONLY THE NET PRICE IS TO BE PAYED !!!!! ALL INFORMATION IS WITHOUT GUARANTEE. EQUIPMENT + ACCESSORIES.The basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks are our general terms and conditions (see legal notice).

Condition: used, maximum load weight: 30,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2008, next inspection (TÜV): 02/2026, Year of construction: 2008, Equipment: ABS, KRONE REFRIGERATED TRAILER CARRIER VECTOR ROLLER SHUTTER LIFT AXLE AND STEERING AXLE TÜV LOW USAGE ----VEHICLE HISTORY * 2nd owner * German vehicle * Video available on request VEHICLE EQUIPMENT * TYPE: SD * Disc brakes * BPW axles * 1st axle is a lift axle * 3rd axle is a steering axle * Roller shutter door * Air suspension * Carrier Vector refrigeration unit * Partition wall * Operating hours will be provided * Permissible total weight: 36,000 kg * Unladen weight: 5,600 kg * Payload: 30,400 kg * Tire size: 385 / 65 R 22.5 ---- * EXPORT SALES ONLY WITH DEPOSIT (DEPOSIT) MIN. €500 - €2,000 ----EXPORT DECLARATION CUSTOMS EXW POSSIBLE IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENCE PLATES AND 17 - 21 DAYS AUSTRIAN LICENCE PLATES EURO 1 PLEASE ONLY RESERVE VEHICLES VIA EMAIL FUNCTION ORAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Changes, errors, and prior sale reserved! You can find more vehicles on our homepage: Iodpfx Apsxlmbcecsia Sale is exclusively subject to our General Terms and Conditions – see homepage. Important notice – Important information: Despite careful verification of all details in our offer, errors may occur. Some may result from transmission errors within different platform providers' systems. Therefore, we point out that all information is provided without warranty and does not constitute any legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is for information purposes to initiate a contract. All information is non-binding and does not represent warranted properties.

Condition: used, Year of construction: 2019, functionality: fully functional, power: 4 kW (5.44 HP), pressure (max.): 10 bar, Equipment: type plate available, For sale due to business closure: powerful and durable Aircraft compressor with Aircraft refrigerated compressed air dryer. Purchased in 2019, compressor year of manufacture: 2018, dryer year of manufacture: 2019. Iedpfxsyup H Ie Apceia

Condition: new, Jointer and thickness planer HOLZKRAFT fs 30c TERSA - Exhibition machine - Table opening to the rear, TERSA planer shaft, helical toothed infeed roller ----- Technical data ----- Planing width: 300 mm, Thicknessing table dimensions: 565 x 300 mm, table length: 1,510 mm, max. chip removal: 4 mm, planer shaft Ø: 72 mm, Number of knives: 3 pieces, clearance height: 230 mm, min. Workpiece thickness: 3 mm, feed speed: 7 m/min, Speed: 5,200 rpm, Extraction nozzle Ø: 2 x 120 mm, Iijdpfxeu R Sz Te Apcoa Motor power 400 V: 5.5 HP / 4 kW, weight: 270 kg - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Isdpfxou R S Awe Apceia Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Isdpfxeu R Sztj Apceia Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine -

Condition: ready for operation (used), Year of construction: 1995, Gubisch tenoning machine with 50mm stroke spindle, 3 tools at 100mm each, angle stop, automatic feed, and pneumatically adjustable crosscut saw. Gubisch Centromat profiler and scribing machine. 1st spindle with co- and counter-rotation and plunge function, 2nd spindle 40mm stroke with 2 tools, 3rd spindle 40mm plunge spindle with 1 tool, 4th spindle from above for glazing bead cutting. Includes Leitz IV 68 window milling tool with carbide reversible knife, including door and stationary window tool for 36mm putty rebate windows. Everything is completely matched. Only for sale as a complete set, pickup only, loading assistance provided. Iisdpfx Apsytdvnscea

Condition: used, Year of construction: 1997, functionality: fully functional, BAIER Geba 46/A embossing and punching machine, year of manufacture 1997 Iijdoyt Igwspfx Apcsa fully operational - two punching units - Geotin cutter - operating documentation max. material width: 250 mm max. punching width: 240 mm heating power: 2200W embossing force: 100kN

Condition: good (used), Approx. 3,000 units, Rotho boxes 40x30x22 cm with lid and 60x40x30 cm without lid - used - : Price for the entire lot ex location: €5,500 (net)! Sale only as a complete lot! Iodpfx Ajyr Hm Tepcsia Small with lid Large without lid Manufacturer Rotho Rotho Year of manufacture - - Type - - Dimensions 40 x 30 x 22 cm 60 x 40 x 30 cm Internal dimensions 36 x 26 x 21 cm 56 x 35.5 x 30 cm Quantity 2,000 pcs 1,000 pcs Quantity per pallet 64 pcs 20-24 pcs Condition The condition of the containers may vary. There may be signs of use, such as worn corners. The interiors are clean, as they come from production. The exterior surfaces may have adhesive residue from labels. Available: immediately Location: 79677 Schönau, Germany • Small containers with lid (dimensions: 40 x 30 x 22 cm); quantity approx. 2,000 pcs.

Condition: used, functionality: fully functional, Package consisting of three machines: 1. Striebig vertical panel saw, year of manufacture 1977 2. Rapid table saw PK 100, year of manufacture 1989 3. Chip extraction system With the Striebig panel saw, right-angled horizontal cuts up to 5300 mm in length and vertical cuts up to 2200 mm in height can be made. Bevel and mitre cuts are not possible. The Rapid table saw is equipped with a sliding table and is exceptionally stable and precise. The machines are sold only as a package. Collection only. Iedpfx Apsyrf Icecoia

Condition: like new (used), Year of construction: 2022, operating hours: 550 h, functionality: fully functional, machine/vehicle number: siehe Bildmaterial, total length: 4,500 mm, total height: 1,400 mm, total width: 1,550 mm, type of input current: three-phase, product height (max.): 200 mm, product height (min.): 50 mm, product length (min.): 400 mm, product length (max.): 600 mm, product width (max.): 400 mm, product width (min.): 250 mm, input voltage: 400 V, working height: 800 mm, We are offering this as-new Smipack / Saropack production line consisting of the GHS1000/400, WS 6000 CS, and T450 (conveyor belt/sealing station/heat shrink tunnel), with all components manufactured in 2022. Last maintenance was carried out in 09/2025. Shrink Wrapper WS 6000 CS Phase Connection: 3 + N + PE Voltage: 380–415 V Frequency: 50–60 Hz Power Consumption: 3350 W Current: 14.5 A Iisdeytcc Hjpfx Apcja Conveyor Belt GHS 1000/400 Phase Connection: 1 + N + PE Voltage: 220–240 V Frequency: 50–60 Hz Power Consumption: 370 W Current: 1.8 A Shrink Tunnel T450 Phase Connection: 3 + N + PE Voltage: 380–415 V Frequency: 50–60 Hz Power Consumption: 8000 W Current: 11.5 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2021, functionality: fully functional, MillStep CNC Router PA8070V3, Year 2021, as well as PAX8050V2 – Year 2015 – 6 units in total available CNC Gantry Milling Machine MillStep PA8070V3 – fully equipped Iisdpfx Apeyrx Shocja For sale are three CNC gantry milling machines MillStep PA8070V3 (custom size) in excellent condition. This machine is ideally suited for precise machining of aluminium, plastics, wood, and non-ferrous metals, as well as for prototyping and small batch production. Technical Details: • Travel range: X 800 mm / Y 680 mm / Z approx. 200–240 mm • Work area: 800 × 625 mm • Repeatability: ±0.01 mm • Feed rate: up to 9 m/min • Linear guides: HIWIN profile rails • Ball screws on all axes Equipment: • HF spindle 2.2 kW (up to 24,000 rpm) with ER25 collets • Hitachi frequency converter WJ200 • 3-axis control with cncGRAF Pro • Vacuum tables 800 × 500 mm and 600 × 500 mm • Vacuum pump 1.5 kW • Minimum quantity lubrication (MQL) • Tool length sensor • Robust steel base frame with chip drawers • Safety enclosure with protective doors The machines are fully functional, well maintained, and can be inspected and tested by appointment. Location: 09474 Crottendorf Price: €5,900 net per unit (PA8070V3, year 2021) and €3,900 net per unit (PAX8050V2, year 2015) – 3 units of each model available – Inspections on site possible (machines are still in operation). Shipping: possible by arrangement

Condition: used, mileage: 35,300 km, power: 96 kW (130.52 HP), first registration: 09/2021, next inspection (TÜV): 09/2024, color: grey, gearing type: mechanical, suspension: other, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, onboard computer, soot filter, traction control, Roadworthy, touchscreen, excellent condition, accident-free, demonstration vehicle, metallic paint, 5-door, one owner, start-stop system, Euro 6d emissions standard, green environmental badge (4), fabric upholstery, tire repair kit, ISOFIX on front passenger seat, fully digital instrument cluster, distance warning system, front side airbags, passenger airbag, rear side airbags, front curtain/head airbags, rear curtain/head airbags, height-adjustable front seats, leather steering wheel, LED headlights, automatic lights, rear parking sensors, parking assistance, daytime running lights, LED daytime running lights, emergency brake assist, digital radio, rain sensor, traffic sign recognition, digital speedometer, hill-start assist, tire pressure monitoring, traction control system, electronic traction system, electric windows, seat heating, heated front seats, mobile phone preparation, hands-free system, Bluetooth hands-free, multifunction steering wheel, radio, radio/MP3, MP3 interface, USB port, heated exterior mirrors, auto-dimming mirrors, auto-dimming interior mirror, power steering, electric exterior mirrors, rear headrests, brake assist, speed limiter, ISOFIX child seat anchor points, split rear bench seat, alloy wheels, roof spoiler, center armrest, lane keeping assist, electronic parking brake, manual transmission, on-board computer, particulate filter, start-stop system, fully digital instrument cluster, assistants: traffic sign recognition, rain sensor, light sensor, emergency brake assist, hill start assist, lane keeping assist, distance/collision warning. Comfort: automatic climate control, power steering, central locking, electric windows, seat heating, electric exterior mirrors, split rear seat backrest, cruise control, park distance control, multifunction steering wheel, auto-dimming interior mirror, center armrest, leather steering wheel, speed limiter. Visibility: LED main headlights, LED daytime running lights, LED rear lights, fog lights, headlight leveling, heated exterior mirrors. Safety: ABS, airbags, passenger airbag, side airbags, ESP, traction control. Iedpfx Apovifdhocjia

Condition: used, mileage: 519 km, power: 28 kW (38.07 HP), first registration: 07/2017, fuel type: diesel, overall weight: 2,400 kg, color: orange, gearing type: mechanical, suspension: other, operating hours: 519 h, Equipment: air conditioning, all wheel drive, cabin, road-legal, 1st hand, HU/AU new, diesel all-wheel first registration 10.07.2017 519 operating hours 28 kW air conditioning cabin lawn tires hydrostat front and rear hydraulics comfort seat road-legal 1st hand permissible total weight 2,400 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS SECOND. If you have any further questions, please do not hesitate to contact Mr. Faller at the number. //*EXCHANGE, DEPOSIT OR RETIREMENT OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You will find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Iodpjvic Dfofx Apceia

Condition: used, mileage: 1,200 km, power: 18 kW (24.47 HP), first registration: 01/2018, fuel type: diesel, overall weight: 2,000 kg, color: orange, gearing type: mechanical, suspension: other, number of seats: 1, operating hours: 1,200 h, Equipment: air conditioning, cabin, , diesel First registration 02.01.2018 18 kW cubic capacity 1,261 cm³ 1,200 operating hours Front loader Front hydraulics Front PTO Hydrostat Cab air conditioning 1 seat Rear PTO Shovel Front loader permissible total weight 2,000 kg The vehicle had a special purpose registration on 23.11.2017. FOR US THE CONDITION AND THE FEEL OF THE VEHICLE ARE DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller at the number. //*EXCHANGE, TRADE-IN OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* Further offers can be found on our homepage: The description and data given do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Ijdpsvicvhofx Apcjia

Condition: used, first registration: 11/2008, overall weight: 6,750 kg, color: silver, gearing type: mechanical, suspension: other, Partition wall, spare wheel, HU/AU new, top apartment Sink Fridge Hob Sitting area Storage cupboards Separate bathroom Washbasin WC Shower 2-3 sleeping places Air conditioning (retrofittable) 4-5 horses Surveillance camera in the horse compartment Roof hatches Window in the horse compartment Rear ramp Ramp limiter Saddle and bridle holder Horse shower Spare wheels Permissible total weight 6.750 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS IN SECOND PLACE. If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, TRADE-IN OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* Further offers can be found on our homepage: The description and data given do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Iiedpfxjl Tm Avj Apcja

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Iisdpfxoyq Rdye Apcsa Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: used, Year of construction: 1993, CNC Lathe Monforts RNC 4 with KNCS 260 chuck Collet up to Ø 60 mm Bar feeder up to Ø 65 mm Year of manufacture: 1988 Lots of accessories CNC Lathe Monforts RNC 4 with 15-series control and C-axis, KNCS 260 chuck, year 1995, lots of accessories RNC 5 Chucking-only lathe Year of manufacture: 1992 Includes many jaws Monforts RNC 7 with automatic tailstock, 1500 mm Z-axis travel Driven tools with spindle indexing every 2.5° Chuck 500 mm, many tools and jaws included Year of manufacture: 1993 Very good condition Iiedpfx Apeyq R T Iocsa The last CNC lathe, an RNC 7-1000 with automatic tailstock, steady rest, C-axis Lots of tools and jaws Ideally, everything would be sold as a package — 5 Monforts lathes with a very large amount of accessories.

Condition: used, Year of construction: 1994, EDM machine Charmilles Robofil 2020 and 4020, year of manufacture 1994 and 1996 Iisdpsyq R Tbofx Apcoa