Used Kosmetika- Düse Cosmetic Nozzle for sale (2,746)

Condition: used, CATALOGUE NUMBER 7650 Technical data: - max. working length 1500mm - max. working diameter 250mm - milling (disc milling cutter) 7.5kW - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm - weight approximately 3000kg ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation Fsdpfx Akoztrfcshjgf - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Complete in standard design with: Fsdpfx Aezktq Iekhjgf - Dowel feed via electronic vibratory feeder - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container - 1 stainless steel container for 5 kg of glue and - 1 stainless steel container for 5 liters of water for rinsing including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Condition: excellent (used), CATALOGUE NUMBER 8024 TECHNICAL SPECIFICATIONS - roller width 640mm - max thickness of workpiece 210mm – from top: - pawls - toothed infeed roller, pulling - pressure roller Fodpsztquvjfx Akhegf - planing roller - pressure roller - smooth outfeed roller, pulling, metal - 2 adjustable sliding rollers at the bottom - motor approx. 5.5kW - manual table lifting - 2 feed speed settings - dust extraction nozzle diameter 130mm - dimensions L/W/H 1300x1200x1200mm - weight 950kg ADVANTAGES - German-made - used thickness planer, very good condition Net price: 8900 PLN Net price: 2119 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2015, total length: 2,100 mm, total width: 900 mm, total height: 1,050 mm, Colour: White Weight: 250 kg - Details: - └ Description: Front-wheel drive not available - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: KK/126675 - Main motor power [kW]: 3.0 - Max. cutting height [mm]: 100 - Parallel stop displacement [mm]: 1300 - Roller table length [mm]: 840 - Table width [mm]: 560 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 315 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 45 - └ Max. adjustable [°]: 90 - └ Cutting height at 45° [mm]: 70 Fsdpfx Akjzrkxrjhogf - Voltage [V]: 400 - Current consumption [A]: 10 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 2100mm x 900mm x 1050mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2011, condition: used, Spiral crate washer for rinsing plastic beverage crates with cleaning solution. The crates are fed into the crate washer via an inlet conveyor belt, where a crate stop positions them at the required spacing relative to the rotating spray arms. The crates are conveyed upwards via the spiral-shaped crate guides and are simultaneously rinsed clean by numerous rotating nozzles. At the machine outlet, the crates are rinsed with water. Additional title: Spiral crate washer Capacity: 2500 cr/h adjustable Spraying pressure: 4 bar Volume of the lye tank approx.: 1000 l Fgsdpfxoztw Dke Akhsf Treatment time per crate approx.: 91 s depending on the performance setting Length: 3000 mm Width: 2000 mm Height: 5000 mm Running direction: long side first Material: stainless steel Base construction: Spiral crate washer Features: Lye pump (15 kW, capacity 80 m³/h); suction tank for cleaning solution; conveyor belt with drives; control cabinet; cleaning water connection R 1 1/4"; post-spraying connection R 3/4"

Year of construction: 2019, condition: used, 2-vessel brewhouse with stainless steel brewing vessels, mounted on a brewing block. The brewing block consists of the following components: 1. Mash and wort kettle, steam-heated (bottom heating zone with perforated weld + internal boiler), insulated, with a gross volume of 15 hl. The kettle is equipped with a continuously adjustable, top-driven agitator. The boiling vapours are extracted by a kettle fan into a vapour condensation pipe fitted with Lechler nozzles. The kettle also features a CIP spray head and a digital thermometer. 2. Mashing and lauter tun, insulated, with a continuously adjustable rake, inlets and outlets for wort and thick mash, spent grain flap, lauter floor (designed as a slotted screen floor), mash/wort pump and digital thermometer. Cleaning nozzles are fitted for internal cleaning and rinsing. For hot trub separation, the vessel also features a tangentially fed whirlpool nozzle. 3. Control cabinet with control panel 4. Various pipework, valves and sensors. The system is equipped with a two-stage plate heat exchanger for wort cooling at 1,000 l/h and a wort aeration device. In addition, a 20-hectolitre insulated stainless-steel tank with a heating jacket and a booster pump is available for use as a hot-water storage tank. Additional title: brewing block with stainless steel brew vessels Mash and wort pan net capacity approx.: 1000 L hot wort Fgsdpfx Akjztwz Ashof Mash and wort kettle inner diameter approx.: 1000 mm Mash and lauter tun inner diameter approx.: 1250 mm Height up to hood door approx.: 1 m Power: 4 kW Voltage: 400 V Frequency: 50 Hz Operation / Control: “Braupilot” HMI control via touch screen Material: Stainless steel 1.4301 Base construction: Thanks to its modular design, the entire brewhouse is very compact and can be integrated individually and space-savingly into the guest area. Features: Mash and wort kettle with bottom heating and internal cooker, mash and lauter tun with whirlpool nozzle (combination vessel), hot water tank, wort cooling, wort areation, fittings, pumps, pipes

Condition: used, mileage: 284,316 km, power: 165 kW (224.34 HP), fuel type: diesel, gearing type: automatic, first registration: 06/2020, color: blue, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, soot filter, Special equipment: Audio navigation system Discover Media (Bluetooth, touchscreen color display, SD card interface), digital radio reception (DAB+), speakers (6), electronic voice amplification (in-car communication), USB multimedia interface (iPhone / iPod) with AUX-IN, Bluetooth interface for mobile phone, App-Connect, equipment package: Light + Sight, automatic headlight activation (ALS) with leaving home / coming home function, foldable remote key (2), reinforced rear axle suspension / damping, increased payload to 3.08 t, load compartment lining, load compartment blind (roll cover system, pick-up), premium multi-function display (color display), light alloy wheels 8x19 (Cantera), metallic paint, spare wheel in roadworthy condition (light alloy), on-board tools and jack, illuminated side sills, Style package Chrome 3 Plus (styling bar plus and side sills with step), styling bar (stainless steel), side sills (stainless steel) with step, 3rd brake light LED with cargo area lighting, rear windows with sun protection film, heated windshield washer nozzles, auxiliary heater / parking heater with remote control Additional equipment: Fgedpfxszrri Ee Akhsf 2nd row of seats, bench seat (3 seats), passenger airbag deactivatable, airbag driver / passenger side, exterior mirror aspherical, left, exterior mirror elect. adjustable and heated, exterior mirror convex, right, exterior mirror painted / partially chrome-plated, license plate lamp LED, display for windshield washer fluid level, floor covering rear (carpet), floor covering front (carpet), headliner fabric, gray, anti-theft device for wheels (wheel locks), parking aid front and rear including reversing camera, electronic differential lock (EDS), traction control (ASR), driver assistance system: trailer stabilization program, driver assistance system: multi-collision brake, electric windows front and rear, glove compartment lockable, tailgate comfort (lockable, pick-up), rear lights dark tinted, rear window heated, interior: decorative inserts light silver, interior filter: dust and pollen filter with activated carbon filter, Isofix mounts for child seat in rear seat, body / structure: double cab (double-cab), body / structure: pick-up, air conditioning Climatronic 2-zone, headrests rear (3-fold), radiator grille black painted, with 2 double chrome slats and 6 vertical chrome struts, leather partial trim (gear / selector lever knob and handbrake lever knob leather), gear / selector lever knob leather, handbrake lever knob leather, steering column (steering wheel) mechanically adjustable, height / length adjustment, headlight range adjustment, model refinement, engine 3.0 Ltr. - 165 kW V6 TDI DPF, rear fog light, wheelbase 3097 mm, smoker package, low emission according to exhaust standard Euro 6, mud flaps front and rear, side airbags front with head airbag unit, seat belts front with seat belt tensioner, height adjustable, seat cover / upholstery: leather Vienna, front seats ErgoComfort (including 14-way seat adjustment, partially electric), lumbar support front, electrically adjustable, seat heating front, voice control system, start / stop system, sockets (12V connection) 4-fold, in dashboard, center console, rear and cargo area outside, rear bumper chrome, front bumper vehicle color, door seals with dust protection, door handles outside vehicle color, first aid kit and warning triangle, rear windows tinted (65%), lashing eyes on cargo area / cargo floor, mobile phone / cell phone preparation, warm air cha

Condition: good (used), functionality: fully functional, For sale is a compact and mobile Nestro dust extraction system for extracting wood chips and dust from woodworking machines. The mobile design allows for flexible use of the extraction system on different machines. The system features a filter and a chip collection bag and is particularly suitable for carpentry shops, joineries, and smaller workshops. Technical data: Manufacturer: Nestro Motor power: 1.1 kW Extraction connection: Ø 140 mm Mobile design Filter unit with filter bag Separate chip collection bag Direct extraction at woodworking machines Compact design Equipment: Filter bag Chip collection bag Extraction fan Extraction nozzle Ø 140 mm Chassis with rollers Fgjdpfx Ajztau Eskhof Suitable for extraction, for example, on circular saws, milling machines, planing machines, and other woodworking machines – depending on the required air volume flow and extraction connection. Scope of delivery: Nestro dust extraction system Filter and chip collection bag Accessories as shown in the photos The machine can be inspected and tested under power after prior appointment. Transport is possible for an extra charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC Precision Surface Grinding Machine Table drive: hydraulic Cross-axis drive: electromechanical Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Fjdpjzrtniofx Akhjgf Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm workpiece weight 400 kg table longitudinal travel 650 mm table speeds 2 - 28 m/min table cross travel 400 mm speed 100 - 1000 mm/min grinding wheel size 300 x 50 x 76,2 mm grinding spindle drive 3,7 kW peripheral speed 10 - 32 m/sec total power requirement 11 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,95 x 2,65 x 2,47 m Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar Machine light Without grinding wheels and flanges.

Condition: used, Year of construction: 2018, Overview This DUETTI case packing group combines a case erector, a case packer and a top-loading case sealer for American-style cases, built by Duetti Packaging (Galliera Veneta, Italy) in 2018 and commissioned at the end of 2018. It packs bottles in 12 x 33 cl and 6 x 75 cl formats at approx. 6,000 bottles/h (33 cl) or approx. 3,000 bottles/h (75 cl), around 10 cases/min. The group is still installed and under power at a brewery in France and can be visited in production on request. Technical data - Manufacturer: Duetti Packaging (Galliera Veneta, Italy) - Model: FORMER 20H + PACKER 10 + CHMSS - Year of manufacture: 2018 (commissioned end of 2018) - Machine type: case former - case packer - case sealer group, American-style cases (carton) - Case formats: 12 x 33 cl and 6 x 75 cl - Capacity: approx. 6,000 bottles/h (12 x 33 cl), approx. 3,000 bottles/h (6 x 75 cl) - approx. 10 cases/min - Gluing: hot melt, Meler Micron 5 unit Equipment - FORMER 20H case erector: carton magazine, vacuum gripper, bottom folding and gluing with 4 nozzles, pressure cylinder and pad, 90° discharge towards the packing section - PACKER 10 case packer: 4-lane bottle distributor, batch formation via sensors, gripper head with inflatable tulip grippers, Cartesian-type movements - CHMSS top-loading case sealer: 4 glue nozzles and pressure rollers Fgodpfx Ajzrpwtskhef - Meler Micron 5 hot-melt unit - Case transport through former and sealer via rough-surfaced side belts (no push bars); conveyor in the filling section - Inclined transfer belt between filling and sealing, convertible to horizontal by removing the sealer foot extensions - Technical documentation (operating manuals, electrical schematics) and CE declarations of conformity Please note: case marking / coding is not included in the scope of delivery. Condition Used - in production: the group is still installed and under power and can be visited in operation on request. Availability From February 2027 - the line remains in production until the end of January 2027 and is dismantled thereafter. Location: France.

Condition: repair required (used), functionality: not functional, Year of construction: 2007, operating hours: 134,409 h, machine/vehicle number: A0270A0124, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: Siemens, laser hours: 51,652 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, year of last overhaul: 2023, Equipment: documentation/manual, TRUMPF TRULASER 5060 CO₂ Laser Cutting Machine – 6000 W TRUMPF TRULASER 5060 – 6000W CO₂ Laser – Year 2007 – To be recommissioned Brand: TRUMPF Model: TRULASER 5060 (CO₂ Laser) Laser power: 6000 W CNC control: Siemens Serial number: A0270A0124 Year of manufacture: 2007 Technical specifications • Beam operating hours / cutting time: 134,409 h • Laser operating hours under power: 51,652 h • Maximum steel thickness: 25 mm • Dimensions: 10,300 x 3,820 x 2,550 mm • Weight: 16,500 kg Standard equipment: - TruFlow 6000 W resonator - HI-LAS high-pressure cutting - Cutting heads with 7.5’ and 10’ lenses - Quick-change cutting head device - Automatic sheet edge detection - Capacitive profile follower and APC process control - Positioning laser diode - Programmable cutting gas pressure - Programmable power cycle - Oil vaporization device - PCS (Process Control System) - Plasma line and LLS (laser power control) - Sprint Line - Contourline - Modem and remote diagnostics - Focus Line - Laser logbook - Automatic pallet changer - Work area lighting - Automatic nozzle cleaning - Conveyor for small parts and scrap - Multiple suction box - Suction device and dust collector - Automatic stop - TFT color screen - 3.5’ floppy disk drive - TruTops laser lite - RJ 45 network card - Safety device Including: air cutting, 3.5’ laser head with high speed, Load Master preparation, additional post-processor Machine condition The machine was in operation until 2023. The laser source and optical path maintenance have been regularly performed by TRUMPF. Technical inspections and preventive maintenance operations have also been carried out annually by the manufacturer. The machine is currently shut down and requires repairs before recommissioning, including pipe replacement. A detailed quote for the repairs and parts to be replaced has been prepared by TRUMPF and can be provided to serious buyers. The overall condition of the equipment requires, at a minimum, the acquisition of the spare parts mentioned in the manufacturer’s offer in order to restore satisfactory production conditions. Sales conditions • Immediate availability Fsdsztb Eljpfx Akhsgf • Sold as is • Disassembly, loading, and transport are the responsibility of the buyer • Documentation and repair quote available upon request This machine represents an excellent opportunity for a company with the necessary technical skills to restore it or seeking a machine base for spare parts. For any further information or to arrange a visit, please contact us.

Condition: used, This listing is for the APV Gaulin T Series Homogenizer The unit is in full working condition and is ready for immediate use The Gaulin T Series homogenizers, developed by SPX FLOW under the APV brand, are high-pressure, positive displacement reciprocating plunger pumps designed for demanding applications in industries such as dairy, food and beverage, pharmaceuticals, chemicals, and cosmetics. Key Features High Pressure Capability: Models like the Gaulin 132T and 125T can handle pressures up to 600 bar (approximately 8,700 psi), making them suitable for applications requiring intense homogenization. Flow Rate: These homogenizers can process flow rates ranging from 1,000 to 25,000 liters per hour (LPH), accommodating various production scales. Design Options: The Gaulin T Series offers both mono-block and three-piece valve housing designs, allowing for flexibility in maintenance and customization. Hygienic Construction: Constructed with stainless steel or duplex materials, these homogenizers feature 3-A sanitary design, making them suitable for hygienic applications. Maintenance-Friendly: The design includes features like hydraulic valve actuators, easy access to key components, and modular electrical controls, simplifying maintenance and reducing downtime. Applications Fodpfx Aksxhf Tvshsgf Gaulin T Series homogenizers are ideal for applications such as: Dairy Processing: Homogenization of milk, cream, and other dairy products. Food and Beverage: Processing of sauces, dressings, and beverages. Pharmaceuticals and Cosmetics: Manufacturing of emulsions, creams, and lotions. Chemical Processing: Production of paints, coatings, and other chemical products

Condition: used, Year of construction: 2005, - Manufacturer: Cefa - Type: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm + - 20 mm - Operating side: right - Price for reconditioned machine - Gun drive: Duo version - Height-adjustable sprayers - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity ~ 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable 1.5 - 7 m/min - PLC control with touch screen - Number of sprayers installed 0 - Number of paint pumps 0 - Suitable for solvent-based paints - Suitable for water-based paints Fodpfxoxnbhve Akhjgf - Length 4.300 mm - Width 3.360 mm + 1.850 mm - Height 2.700 mm - Total connection ~ 7.1 kW / 28.6 A - Volts, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quote for assembly and commissioning of the system, as well as training for employees. On request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob Fgodev I Akvspfx Akhof - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, Year of construction: 2011, Length 5000 mm Width 100 mm Height 2800 mm Year 2011 0 Range + Heine Conveyor Technology with Reiter electrostatic airless spray technology. Fully automatic industrial painting and coating line for wooden windows, window frames, doors, and wooden elements for sale on behalf of a client. Viewing available. ----- ----- Technical Manufacturer’s Description (Summary): Item 1 Conveyor System: Power + Free circular conveyor, frequency-controlled drives, buffers, stop stations, crossbeams, steel structure according to layout. Item 2: Flood Coating System: flowcomat II-P for priming/pretreatment. Item 3: Spraying Technology: Fgodpfsy Ty E Hjx Akhsf Reiter MAE 7-059 electrostatic airless spray systems with automatic spray nozzles. Item 4: Lifting Technology: MH2T mechanical lifting devices, lifting range approx. 3,200 mm. Item 5 Material Supply: High-pressure paint supply, insulated material supply, paint changeover, ring line, flushing agent supply. Item 6 Control System: Siemens S7-300 for conveyor technology as well as Reiter control system with workpiece recognition and high-voltage power supply. Item 7 Documentation (available separately): Range + Heine order confirmation, layout plan, Reiter order confirmation, and technical descriptions available. ----- Key Technical Specifications: Workpieces: Wooden windows, window frames, doors Workpiece length: up to approx. 5,000 mm Workpiece height: up to approx. 2,800 mm Capacity: approx. 60 window units per shift Coating systems: water-based systems / low-VOC Control system: Siemens S7-300 Electrostatic: 100 kV / 1 mA ----- ----- Price of the above machine available upon request! ----- Price is ex-location. Dismantling, decommissioning, packaging, loading, and all transportation etc. are the sole responsibility of the customer and are not included in the sale or provided by the seller. Further technical data and information in the attached PDF! ----- (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable VAT.

Year of construction: 2004, condition: used, functionality: fully functional, maximum load weight: 125 kg, loading space volume: 2.5 m³, machine/vehicle number: 3881 and 3690, Lot of 2 – TUPESA SC 125 V Industrial Steam Tumble Dryers (2004) Two High-Capacity Steam-Heated Tilting Drum Dryers An excellent opportunity to acquire two heavy-duty TUPESA SC 125 V industrial steam tumble dryers manufactured by TUPESA Maquinaria Textil, Spain. These industrial dryers are designed for continuous, high-capacity textile and garment drying, making them ideal for denim manufacturing, garment finishing, industrial laundries, and textile processing plants. Both units were previously installed in the MASI Jeans factory and formed part of a professional industrial laundry and finishing line. The machines are sold together as one lot. Unit K550 is operational. Unit K551 requires radiator replacement Technical Specifications • Manufacturer: TUPESA Maquinaria Textil • Model: SC 125 V • Machine Type: Industrial Steam-Heated Tilting Drum Tumble Dryer • Quantity: 2 Machines • Year of Manufacture: 2004 • Manufacturing Date: 17.12.2004 • Country of Manufacture: Spain • Power Supply: 380 V, 3-Phase, 50 Hz • Heating System: External Steam Supply • Variable Speed Drive: Danfoss VLT 2800 Inverter • Drum Type: Hydraulic Tilting Drum Machine Details Unit K550 • Internal Reference: K550 • Serial Number: 3881 • Operational Unit K551 • Internal Reference: K551 • Serial Number: 3690 • Requires inspection / suitable for spare parts or refurbishment Key Features • Two industrial steam-heated tumble dryers • Large-capacity tilting drum design • Hydraulic drum tilting for ergonomic loading and unloading • Steam-heated drying system • Danfoss variable-speed inverter drive • Industrial electrical control panel • Heavy-duty construction for continuous production • Designed for large-scale laundry and garment processing Fsdjzkv R Dspfx Akhjgf Includes • 2 × TUPESA SC 125 V tumble dryers • Danfoss inverter drives • Electrical control cabinets • Main drive motors • Steam connection valves • Exhaust fan assemblies • Industrial support frames Applications • Industrial laundry operations • Garment manufacturing • Denim production • Textile processing • Garment finishing • Commercial drying facilities • Heavy textile processing Condition • Sold as one lot consisting of two machines • One machine fully operational • Second machine requires approx.. 1000 euro radiator replacement. • Previously used in professional industrial production • Both machines are externally complete • Good overall industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling and lifting equipment are recommended due to the size and weight of the machines. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are available as this two-machine package or together with the complete industrial laundry and finishing line.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20080010, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 5.5 bar, VIBEMAC V700 Automatic Pocket Hemming Unit with Conveyor (2020) High-Speed Automatic Back Pocket Hemming Machine for Denim & Workwear Production VIBEMAC V700 is a high-performance automatic pocket hemming unit manufactured by VIBEMAC S.p.A. (Italy), specifically designed for automated back pocket hemming in denim, jeans, and workwear production. The machine is equipped with VIBEMAC's patented continuous conveyor feeding system, ensuring precise and repeatable hemming results while preventing fabric distortion, waving, or twisting, even when processing heavy denim or stretch fabrics. Finished pockets are automatically transferred to the integrated rotating collection disk via a pneumatic unloading system, allowing continuous high-volume production with minimal operator intervention. The machine was operating in professional garment production until factory shutdown and remains in fully functional condition. Technical Specifications • Manufacturer: VIBEMAC S.p.A. • Model: V700 • Year: 2020 • Serial Number: 20030010 Fgjdpfszgwrhox Akhef • Country of Manufacture: Italy • Machine Type: Automatic Pocket Hemming Unit • Power Supply: 230 V, Single Phase • Pneumatic Requirement: 5.5 bar • Main Motor: Mitsubishi Electric XL-G554-20Y AC Servo Motor • Motor Power: 550 W • Stitch Type: 2-Needle Chainstitch • Stitch Length: Adjustable 0.9–5.0 mm via control panel • Production Capacity: Approximately 1,800–2,000 pockets per hour Key Features • Patented continuous conveyor feeding system • Designed specifically for automatic pocket hemming • Consistent and repeatable seam quality • Suitable for denim, stretch fabrics, and workwear materials • Pneumatic automatic unloading system • Rotating collection disk with capacity for approximately 600 finished pockets • Adjustable stitch length and sewing parameters • Electronic operator control panel • Easy-access maintenance design • Heavy-duty industrial construction • Suitable for continuous production environments Includes • VIBEMAC V700 automatic hemming unit • Integrated conveyor feeding and transport system • Automatic rotating pocket collection disk • Mitsubishi AC servo motor • Electronic control cabinet • Industrial machine stand • Pneumatic components • Thread stand and guides Applications • Back pocket hemming • Jeans manufacturing • Denim garment production • Workwear production • High-volume apparel manufacturing • Automated garment component production Condition • Fully functional • Previously used in professional garment manufacturing • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 250506-mxa-03, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 600 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, input voltage: 380 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,400 kg, total length: 4 mm, total width: 3 mm, total height: 2 mm, warranty duration: 3 months, air pressure: 16 bar, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, Fiber laser metal cutting machine — 1500 W MAX Photonics (Senke SKL-1530F) Brand new, unused — still sealed in original factory export packaging (0 operating hours). Immediately available. High-precision, long-term stable and affordable fiber laser cutting for professional sheet-metal work. Ideal for metal fabrication shops and repair workshops. Delivered as a complete, ready-to-run package. Complete package — key features: ● MAX Photonics fiber laser source, 1500 W ● DELTA servo motors & drives (1500 W X/Y, 400 W Z) ● Raytools control system with RayTools BM110 cutting head ● Large 1500 x 3000 mm working area (fits a full standard sheet) ● Open-frame design — easy access and loading of oversized plates ● Reinforced, stress-relieved welded steel bed for lasting dimensional stability ● Taiwan YYC gear rack + HIWIN 25 square rails + TBI ball screw (Z) ● Positioning speed up to 150 m/min · cutting speed up to 7 m/min (material/thickness dependent) ● S&A industrial water chiller ● France Schneider electrics · SMC pneumatics · France Motoreducer · automatic central lubrication Fgedpfx Asztn N Dekhof ● Included air compressor (15 kW, 1.6 MPa, 340 L tank) — enables low-cost cutting with compressed air, so bottled nitrogen/oxygen is reserved only for jobs that require it. Lower running costs and greater gas autonomy from day one. ● Included 30 kVA voltage stabiliser — stable power supply, protects the electronics ● Included spare consumables: 100 protective lenses + 100 copper nozzles — full starter set of wear parts Materials: carbon steel, stainless steel, aluminium, brass and other sheet metals — sheet-metal processing, auto parts, metal crafts, chassis/cabinets, kitchenware and similar industries. Sales exclusively to commercial businesses. Machine located in Jõhvi, Estonia — viewing by appointment; INCOTERMS: EXW

Condition: used, Year of construction: 1980, total width: 3,350 mm, total height: 1,500 mm, Colour: Grey Empty weight: 3.000 kg Dimensions (LxBxH): 160 x 335 x 150 cm Price: On request 1e as: Single saw 2e as: Upper 3e as: Lower 4e as: Multibladesaw Fsdpfx Aownh Uxekhegf - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 10517 - Number of spindles [pcs.]: 4 - Max. planing width [mm]: 620 - Feed table length [mm]: 1070 - Diameter extraction nozzle [mm]: 110 - Transport dimensions: 1600mm x 3350mm x 1500mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser type: CO₂ laser, laser power: 5,000 W, Equipment: cooling unit, nozzle changer, - Laser power: 5000 watts. - Year of manufacture: 2010 - Thin sheet productivity package - Nozzle changer Fjdpfx Akjzq S Edehsgf - Transverse conveyor - Tilting container for transverse conveyor - LiftMaster Store - Extended sorting system (1000 x 600) - Extended part removal for parts from 600 x 600 - Integrated sheet alignment - Single-sheet separation - Sliding gate, two-leaf - SortMaster - Rotating unit + extended part removal 1000 x 600, infinitely adjustable - Additional gripper for long parts - Extended magnetic suction system - TruStore 1030 - Infeed/outfeed station with trolley - 10-level compartment, 90 mm + pallet - 5 pallet bases - Column cladding - Storage interface

Condition: used, mileage: 100 km, power: 125 kW (169.95 HP), color: blue, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Henschel flatbed truck with aluminum sideboards Ladder support behind the cab Dimensions approx. 4,300 x 2,020 mm Fodpfx Aszr Twdjkhjgf BA3 Active Brake Assist, C6L Multifunction steering wheel, C6L Multifunction steering wheel, C71 Underrun protection device according to EC regulations, C72 Bumper and corner elements paintable, CB8 Stabilization Level II, CL1 Steering wheel adjustable in inclination and height, CM9 Painted components, pure white MB 9678, CN2 Radiator grille frame in vehicle color, CW2 Omission of vehicle lowering, E07 Hill start assist, E1D digital radio (DAB), E1E Navigation, E1U USB socket 5 V, E2A Take-off for ABH special signals in the cockpit, E3J Pre-installation for switch panel, E57 Electrical system for trailer socket, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, EK1 Terminal block for electrical connection, ES0 Jump start assistance Contact, EW6 Pre-installation for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F49 Heated windshield, F68 Heated and electrically adjustable exterior mirrors, FF5 Storage compartment above the windshield, FG8 Front cup holder, FHS CAB, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under the cockpit, FJ5 Folding cover for storage compartments left and right, FQ6 Lockable compartment in storage space above the windshield, FR7 PRE-INSTALLATION ELECTRICAL SYSTEM REVERSING ASSIST, FS1 Mirror holder, extended, GD8 6-speed manual transmission ECO Gear 360, H1I Wide-angle nozzles in the instrument panel, H21 Heat-reflective glass with band filter on the windshield, HH9 SEMI-AUTOMATICALLY REGULATED CLIMATE CONTROL SYSTEM TEMPMATIC, IF3 Chassis with cab, IR6 Wheelbase 4325 mm, overhang 1615 mm, IT4 3.5-ton truck, J10 Speedometer km/h, J1V Pre-installation for blind spot assist for body builders, J55 Belt warning system for passenger seat, J58 Belt warning system for driver's seat, J65 Outside temperature display, JA8 Crosswind assist, JA9 Traffic sign assist, JB4 Active lane keeping assist, JF1 Rain sensor, JG0 Gear shift indicator, JH3 Communication module (LTE) for digital services, JI7 Start-up mileage maintenance interval 60,000 km, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, KB7 Main tank 93 liters, L LEFT-HAND DRIVE, L07 Outline lights, L72 Electrical system for external superstructure, L76 Rear light wiring harness extended, L94 Omission of parking light, LA2 Headlamp assistant, LB1 Lateral marker lights, LE1 Adaptive brake light, LV6 Pre-installation for electrical system for 3rd brake light, M60 Generator 14 V / 250 A, MJ8 ECO start-stop function, MS1 Cruise control, MT5 EMISSIONS CLASS EURO 6e RDE5 N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800/min, O7L Rear blind spot radar, X to rear axle 300 +/-100 mm, O7P Rear blind spot radar, additional X to rear axle +1000 mm, O94 WIDTH OF SUPERSTRUCTURE OUTER EDGE 2150 MM +/- 50 MM, P47 Front mud flaps, Q11 Longitudinal beam reinforcement, Q18 Rear crossbeam screwed on, RH2 Tires 235/65 R16 C, RM7 Summer tires, RS3 Steel wheels 6.5 J x 16, RY2 Tire pressure monitoring system on front and rear axle, wireless, S23 Passenger seat, double seat, S28 Armrest, driver's and passenger's door, S87 Driver's seat box, low, SA5 Airbag driver, SA6 Airbag passenger, SB3 Suspension seat, comfor

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Fodpfx Aeztn Dzjkhjgf Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.

Condition: used, Mazak Teaching Box/Teach Pendant 7780003000 – Original Yamazaki Mazak For sale is an original Mazak Teaching Box / Teach Pendant, part number 7780003000 (B-02), from Yamazaki Mazak Corporation. The handheld unit is in fully functional condition and operates perfectly. Cosmetically, it shows only the usual signs of wear and tear consistent with age and use (see photos). Technical Specifications Manufacturer: Yamazaki Mazak Corporation Part Number: 7780003000 Original Mazak spare part Made in Japan Condition Used Fgedpfx Akozrpx Rshof Technically sound and fully functional Display, buttons, and emergency stop function correctly Normal signs of use on the housing and cable (see images) Scope of Delivery 1 × Mazak Teaching Box 7780003000 Connection cable Delivered as shown

Condition: used, functionality: unexamined, machine/vehicle number: EVO-lizer A4, Year of construction: 2015, operating hours: 4,413 h, total length: 720 mm, total height: 720 mm, total width: 540 mm, type of input current: AC, overall weight: 64 kg, input voltage: 230 V, input current: 4 A, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.05 mm, table width: 270 mm, tank capacity: 11 l, table length: 195 mm, noise level: 46 dB, number of print heads: 2, Used FDM 3D Printer EVO-lizer A4 Device Data: Printer dimensions (W x D x H): 540 x 720 x 710 mm Weight: 64 kg Connection data: 230 VAC; 50/60 Hz; 4A Ambient temperature: 15 – 35 °C Ambient humidity: 30 - 70 % Acoustic Data: Idle mode: 40 dBA Operating mode (1 m distance): 46 dBA Fgsdjxu I R Djpfx Akhef Operating mode (40 cm distance, door open): 62 dBA Technical Data Sheet: Print bed size (W x D x H): 270 x 195 x 205 mm Minimum layer thickness: 0.10 mm Positioning accuracy: 0.05 mm Nozzle temperature range: 160 – 260 °C Print bed temperature range: 30 – 100 °C Filament material: ABS, PLA Filament diameter: 1.75 mm Software/slicing program: EVO-lizer

Year of construction: 2013, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 2 units available, this machine offers reliable performance for your production needs. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei 35-180 CX machine we have for sale. Contact us for further details. Fjdpfx Akezr H Snjhegf • Axes: not applicable • 2 units available (80 & 81)(82 is sold) • Plasticising size 180 • Plasticising arrangement H • Screw diameter 28 mm • Nozzle radius 10 mm • Nozzle bore 4 mm