Used Kraussmaffei Spa 12/25 Rp for sale (34,975)

Condition: used, first registration: 06/1990, color: other, Year of construction: 1990, OLD LOWLOADER TIRES. Kjdpfx Afsxvx Nyodolr

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer Klodpfx Ajx Suzaefdjr * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: used, Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt Kljdsl Ab D Uepfx Afdor -Manufacturer: Forbo Siegling, conveyor belt type E 12/2 EO/E3 MT-TT TRANSPARENT -Width: 500mm -Length: 11900 mm -Thickness: mm -Quantity: 1 piece available -Transport dimensions: 500/270/H230 mm -Weight: 11.3kg

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-12-50-Y3A 543979 -Stroke: 50 mm -Number: 15 sleds available -Price: per piece -Dimensions: 185/60/H45 mm Klsdpfxjxw Tc Re Afder -Weight: 0.9 kg/pc.

Condition: good (used), cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R230.19 8250-12 Kodpfx Aeu Ribkefdslr -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 300 x 60 mm -Weight: 24.1 kg

Condition: used, Hydraulic pump, oil pump, gear pump -Shaft mount: Ø 14 mm -Quantity: 1 piece available -Dimensions: Ø 115/190 mm Klodpfx Aedpaqpjfdor -Weight: 3.7kg

Condition: good (used), Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 25 to 180 mm, see photos -Number: 3x tensioning brackets available -Price: per piece Kledpfx Aew Upy Usfdsr -Dimensions: 160/100/H270 mm -Weight: 3.5 kg/piece

Condition: good (used), Year of construction: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit Kjdpjwkqmisfx Afdslr -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Condition: good (used), Semiconductor relays, switchgear, switching components -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink -Type: 6x opto 22 480D45-12 / 1x electromatic RA4425-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg Klodpfx Ajpvqygsfdor

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WV Lenze, clamping cylinder stroke 25 mm Kjdpfx Afewzia Asdolr -Type: 63 TGL 30-7312 -Shaft Ø 32 mm -Number: 4x clamping cylinders available -Price: per piece -Dimensions: Ø 90 x 160 mm -Weight: 5.2 kg/piece

Condition: good (used), Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-125-25-APA-20K2 -Stroke travel: 25 mm -Piston: Ø 125 mm -Piston rod: Ø 25 mm / M20 -Max. pressure: 10 bar Kodpfx Ajxwk Taefdslr -Number: 7 cylinders available -Price: per piece -Dimensions: 175/135/H210 mm -Weight: 3.5 kg/pc.

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WMW, clamping cylinder stroke 15 mm -Type: 25 30-7312 -Shaft Ø 14 mm -Number: 12x clamping cylinders available -Price: per piece -Dimensions: Ø 50 x 96 mm Kodpfx Aewziikefdolr -Weight: 1.2 kg/piece

Condition: good (used), V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 3-groove pulley type SPA 140 2517 -V-belt width: 13 mm -Receptacle: cone Ø 80 - 85 mm for taper bushing 2517 -Number: 2x pulleys available Kljdpfxswagt Dj Afdjr -Price: per piece -Dimensions: Ø 146 x 50 mm -Weight: 2.8 kg

Condition: good (used), Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage Kledsxlppispfx Afdjr -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Condition: used, Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt Ksdpfoit Rmbox Afdelr -Manufacturer: Forbo Siegling, conveyor belt type E 12/2 EO/E3 MT-TT TRANSPARENT -Width: 600mm -Length: 2450mm -Thickness: mm -Number: 1x conveyor belt available -Price per piece -Transport dimension: 600/230/H180 mm -Weight: 5.7 kg/pc.

Condition: excellent (used), Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, Conveyor belt type E 12/2 EO/E3 MT-TT TRANSPARENT -Width: 600 mm Kedpfx Afsl Ab Dfedslr -Length: 2400 mm -Quantity: 1 conveyor belt available -Dimensions: 600/230/H180 mm -Weight: 2.8 kg

Condition: used, shell end mills, cylindrical milling cutters, milling cutters, disc milling cutters, slot milling cutters Ksdpeuzn Hgjfx Afdelr -Disc milling cutter: 125 x 12 mm, cross-toothed -Hole: Ø 32 mm -Quantity: 1x cutter available -Weight: 0.8 kg

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Schwabmüller, hydraulic pump from Kaiser Kraft UNI-GV 10/25 UNI 10/25 pallet stacker -Motor: Type UP 10.5/112.79.89 12 V 1.5 kW -Dimensions: 210/200/H465 mm -Weight: 13 kg Kjdei Dyvtspfx Afdjlr

Condition: used, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp Kodpfefbclrjx Afdjlr -Stroke: 120 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: 165/40/H40 mm -Weight: kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 25 mm -Piston rod: Ø 12 mm -Stroke: 50 mm -Admission piston rod: M10 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 242/43/H38 mm Klsdpfx Afjdkf I Nsdor -Weight: 1.37 kg/piece

Condition: used, Upper support, cross support, cross table, cross slide table Ksdpfx Afoct Aa Rjdolr -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg

Condition: used, Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120-25 -Stroke: max. 1310 mm -pneumatic: operated -p max.: 8 bar Kledjdl U I Topfx Afdsr -Dimensions: 90/90/H1660 mm -Weight: 12 kg

Condition: used, mileage: 51,578 km, power: 184 kW (250.17 HP), axle configuration: 4x2, suspension: steel, Year of construction: 2015, Equipment: ABS, Suspension: leaf suspension Empty weight: 4.941 kg Carrying capacity: 7.049 kg GVW: 11.990 kg Kljdpfx Aex R T Hfsfdor Please contact Emal Jaweed for more information

Condition: excellent (used), Spot welding machine with DHZ cylinder Brand DALEX Type PMS 12-5 Rated power at 50% duty cycle: 100 kVA Secondary short-circuit current: 46 kA Kedpjwarqnofx Afdjlr Secondary open-circuit voltage: 8.33 V Electrode force: 120-720 daN Weight: 715 kg With separate central control cabinet for connecting five PMS 12-5 spot welding machines with PLC, five power levels and one MPS 200 synchronous welding controller with eight welding programs

Year of construction: 2025, condition: refurbished (used), Complete automatic Stirrup bender PRIMA 12, manufactured by SCHNELL (Italy) Full revamped “as new”, Up to 12 mm SCOPE OF SUPPLY Two pay-offs for wire coils. - Composed by basement & coil support. - Coils weight max. 3.800 Kg coils. - With automatic pneumatic brake controlled from the computer of the line. Rebar straightening & cutting machine Schnell PRIMA 12 - Straightening devices with mechanical setups and separate adjustment for each strand. - Serial interface to Minicontrol type computer. TECHNICAL SPECIFICATIONS Ksdpfxevtp Rmj Afdslr Revamping year: 2025 Original manufacturing year: 2005 Wire diameter: - Single strand up to: 4 – 12 mm - Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Working pressure: 7 bar Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Weight (approx.): 2300 Kg Original manufacturing year: 2005 Revamping year: 2025 Wire diameter Single strand up to: 4 – 12 mm Wire diameter Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Working pressure: 7 bar Weight (approx.): 2300 Kg Dimensions (approx.): 3530x1330x2180 mm