Used Kurt Lachenmeier Shrinking Equipment for sale (40,583)

Condition: used, Year of construction: 2008, machine/vehicle number: FA55, Machine OverviewThe ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation.Operating mode: AutomaticInfeed layout: Straight infeed (inline)speed: 1500 Paks/hour (PPH) Packaging: Tray wrap with neutral film overwrapFormat range: 0.5 L – 10 LMachine configuration: Delivered without container infeed system (to be provided by the line)Year of manufacture: 2008; Overhauled: 2022Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing.Key Technical DataModel: COMBIGIOTTO 90-MBrand: ATLANTAOperating condition: Ready for operationPackage configuration: Wrap + film on trayFilm type: NeutralTray: Available (tray packaging configuration)Machine feed type: Straight (inline)Format capability: 0.5 L to 10 L containersYear: 2008 (overhauled 2022)Automation & ControlIndustrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability).Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application.Integrated diagnostics, alarm history and counters (shift/lot totals).Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status.Electrical protection degree: IP54 for the electrical system and motors.Line IntegrationContainer infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator).Inline design simplifies alignment with fillers, labellers and downstream conveying.Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration.Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering).Condition & MaintenanceOverall status: Ready for operation.Overhaul completed in 2022 to restore full functionality.Preventive maintenance recommended: periodic inspection of film path and sealing elements, collation guides, tray magazine mechanisms, and conveyor chains/belts.Documentation and spare parts recommendations can be provided during commissioning and FAT/SAT... Hnedpfx Aoxdnbzjgyok

Condition: used, Year of construction: 2008, machine/vehicle number: FA56, Machine Overview Automatic tray plus film packer ATLANTA COMBIGIOTTO 90-M designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product with neutral shrink film, then conveys it through a shrink tunnel to obtain stable, retail-ready bundles. Ideal for beverage lines handling PET, glass or HDPE bottles. Reference No. FA56. Year 2008, overhauled in 2022. Condition: Ready for operation. Indicative output up to 25 packs/min, depending on product and format. Operating concept: automatic grouping of bottles, tray forming/loading, film wrapping and shrink-tunnel consolidation. Packaging configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy connection to existing conveyors. Hedpfx Agox H Thzeyjnk Key Technical Data Make / Model: ATLANTA COMBIGIOTTO 90-M Operating type: Automatic Infeed orientation: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal capacity: up to 25 bundles/min (format and product dependent) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Automation & Control Industrial PLC-based control with operator HMI for recipe selection, speed setpoints and diagnostics. Inverter-controlled drives for smooth acceleration and product handling. Photoelectric sensors for product presence, jam and film detection. Temperature-controlled shrink tunnel for consistent film performance. Interlocked access doors with safety monitoring for guarded zones. Line Integration Upstream: accepts bottles from conveyor with 90° transfer to the infeed section; integrated selection/divider to create pack patterns before tray loading. Downstream: discharge conveyor after shrink tunnel for connection to inspection, case handling or palletizing. Signals and handshakes typically include start/stop, fault, emergency stop circuit integration and speed reference. Mechanical interface and layout drawings available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine presented as ready for operation. Preventive maintenance recommended: periodic checks of film path, knife/sealing components, tray magazine/erector, lubrications and conveyor wear parts. Performance & Versatility Suitable for a wide range of cylindrical or square bottles commonly used in beverages. Typical pack patterns achievable for bottles (e.g., 2×2, 3×2, 4×3, etc.) depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray provides rigidity and stacking strength. Consistent bundle quality via controlled film wrapping and thermal shrink process. Site Requirements Electrical supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and earth). Auxiliaries: 24 V DC. Instrumentation voltages: 24 V AC – 230 V AC. Electrical enclosure protection: IP54; motor protection: IP54. Ambient conditions: temperature +5 °C to +40 °C; relative humidity 30%–80% non-condensing; altitude up to 1000 m a.s.l.; no harmful gases or explo...

Year of construction: 2021, condition: new, functionality: fully functional, Spraying equipment for processing mineral fertilizers, coal, etc. loose materials with anti-dust/anti-caking agents or other liquids on a conveyor belt. Dose: 1-4kg/mt; Productivity up to 100mt per hour. The set includes: - 1 gear pump - 1 pressure indicator Hnjdox Akhnepfx Agyek - 6 heating bands for metal drums 200l - 1 self-regulating heating hose (for suction) - 1 self-regulating heating hose (for spraying) - 1 stainless steel suction rod - 1 mechanical stainless steel fertilizer detection system - 1 nozzle body + 3 pcs. stainless steel nozzles - 1 stainless steel protective cover on wheels - 1 electrical control cabinet - 1 user manual on 120 pages The equipment is unused. Made in France.

Year of construction: 2024, condition: ready for operation (used), Offered is a continuous dryer/drying system: Drying units: Alraun infrared and hot air tunnel, transport system: Alraun railing belt TB70x300 (model 2233), infrared drying (model IR70x60/250C/2109): IR radiant heat, digital temperature controller A-Senco TR-85, adjustable upper alarm value (uPal) up to 300°C, hot air drying (model WL70x60/150C/480m³/h/2208): convection heat/hot air, air capacity: 480m³/h, temperature range: controlled heat up to approx. 150°C, transport system: Alraun railing belt TB70x300 (model 2233): drive: SEW-EURODRIVE gear motor, control: MOVITRAC®-LT frequency inverter infinitely variable speed control, dimensions X/Y approx. 700mm/3000mm, inspection possible by appointment. Hnodoyzr Hrjpfx Agyjk

Condition: used, Year of construction: 2015, functionality: fully functional, total width: 2,700 mm, total length: 1,400 mm, total height: 2,100 mm, CHRIST PACKING SYSTEM WRAPPING MACHINE FILMTEQ 3030 Wrapping machine, fully automatic. Modular configuration for integration with other machines and systems. Ergonomic balcony technology for quick format changeover. Operator panel for immediate diagnostics and precise control of every packaging stage. Built in 2015. PRODUCTION - Production: up to 60 cycles/minute - Wrapping material: Low-density polyethylene film (LDPE) - Packaging type: Single band wrap, with side shrink, or full wrap - Grouping dimensions: (L): 60–400 mm/(W): 60–240 mm/(H): 30–230 mm - Single product dimensions (with stacker): (H): 15–400 mm/(W): 15–90 mm/(H): 60–240 mm - Film width: From 30 mm to 300 mm - Maximum reel diameter: 400 mm DIMENSIONS - Footprint: 2700 × 1400 × 2100 mm Hnsdpfx Agoy Au Dcjysk ENERGY CONSUMPTION - Operating voltage: 3x400 V; 50 Hz - Control voltage: 24 V - Rated current: 7.22 A

Condition: used, Year of construction: 2000, We offer a shot blasting machine – drum blast machine with steel belt STEM – B10X12,5S/W3A/SK. Drum diameter – 1000 mm Working belt width – 1250 mm Loading capacity – 400 dm3 Capacity – 1000 kg Max recommended piece weight – 100 kg Turbine rotation speed – 2250 rpm Amount of steel abrasive from turbines – 250–260 kg/min Turbine power – 18.5 kW Elevator power – 1.5 kW Rotary belt motor – 1.5 kW Hydraulic unit – 4 kW Vibration motor – 2 × 0.42 kW Total power consumption – 26 kW Automatic filter – 5600 m3/h Filter power – 5.5 kW The machine is fully functional and in very good condition. Complete documentation is included with the machine. Hsdjw I Huispfx Agyjnk The steel belt is in excellent condition – almost like new. Shot blasting, sand blasting, blast machine, blasting, sand blasting machine, blaster, throwing wheel, blast turbine. Shot blasting machine, blast machine.

Year of construction: 2025, condition: used, New: Yes Empty weight: 2.250 kg CE mark: yes Serial number: 2002005 Hnodpfxoxuzupe Agyok Transport dimensions (LxWxH): 2,45x1,4x2 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Year of construction: 2025, condition: used, New: Yes Empty weight: 690 kg Hsdpexuzucjfx Agyjnk CE mark: yes Transport dimensions (LxWxH): 1,94x1,45x1,44 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Condition: used, Year of construction: 2002, total width: 600 mm, total length: 600 mm, total height: 800 mm, Empty weight: 50 kg Price: On request - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 97370 - Transport dimensions: 600mm x 600mm x 800mm (l x w x h) - Transport weight [kg]: 50kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hnjdpfxjyu Sl Hj Agyjk Lukas van Rossum

Condition: used, Year of construction: 2008, total length: 13,000 mm, total height: 2,100 mm, total width: 1,500 mm, Empty weight: 1.000 kg Price: On request - Year: 2008 - Documentation available: No - CE certificate present: No - Serial number: 7240508 - Transport dimensions: 13000mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hodpfeypt Hbex Agysnk Tess van den Boom

Condition: good (used), Year of construction: 1998, functionality: unexamined, Collamat labelling system Year of manufacture: 1998 Hnedoyy Sxfepfx Agyjk An intermittent application speed of up to 50 m/min and working widths of up to 160 mm provide you with a wide range of applications. Label roll diameter: 250 mm / 350 mm

Condition: used, Year of construction: 2001, Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data Capacity: approx. 40 trays/min Formats: 24 × 0.5 L cans 15 × 0.33 L sleek cans 4 × 6 × 0.33 L bottles 6 × 4 × 0.33 L bottles 8 × 3 × 0.33 L bottles 3 × 6 × 0.5 L bottles Application: Packaging of cans and bottles Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink tunnel Conveyor system | Gebo | Integrated product transport Control panel | Siemens | SIMATIC OP17 | Operator interface Hodpfx Aeyy Sqzsgyjnk

Condition: excellent (used), Dimensions of the entrance opening 400x200 Dimensions Hnedpfx Agetrtzteysk Length 2995 mm Width 1250 mm Height 1550 mm

Condition: new, *IMMEDIATELY AVAILABLE incl. rear ramp / parabolic suspension / spare wheel / bucket holder Technical specifications: • Type: new vehicle • TÜV: new / 2 years • Availability: IMMEDIATE!! • Permissible total weight: 3,500 kg • Unladen weight: approx. 815 kg • Payload: approx. 2,685 kg • Internal dimensions: 400 x 180 x 23 cm (L x W x H) • Overall dimensions: 600 x 234 x 168 cm (L x W x H) • Loading height: approx. 38 cm • Tyres: 12 inch • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • incl. vehicle documents Body construction: • Floor: 18 mm phenolic plywood • Side walls: solid steel sidewalls • Sidewall height: 30 cm • Running gear: KNOTT parabolic suspension • Tipping function: no • Hydraulics: - • Ramp angle: approx. 17° • Overrun device & brake: KNOTT • Frame / chassis: welded, hot-dip galvanized steel frame • Extension: no • Lashing rings: 10 outside and 4 inside • Supports: integrated into ramps • Ramps: upright ramp on rollers • Lighting connector: 13-pin • Approval: COC documents Standard equipment: • Lockable coupling head • Bucket holder • Spare wheel • Welded steel sidewall/frame construction, hot-dip galvanized immersion bath • Very robust bolted, reinforced V-drawbar • 30 cm high sidewalls • Hot-dip galvanized steel loading ramps, upright • Very robust welded steel frame • Massive walkable steel mudguards • Complete frame hot-dip galvanized by immersion bath • Parabolic spring axles (leaf suspension) • Numerous sturdy cross beams for high point load • Lashing rings mounted on outer frame, 10 pieces (5 pairs), pulling force 1,000 kg per ring • Lashing rings mounted on the inside (4 pcs) • Automatic reverse • KNOTT overrun device and parking brake • Robust ramp locks • 13-pin plug • Reversing light • Large safety lights • Integrated rear fog light • Recessed lighting in rear frame • Rear side position lights • Central automatic jockey wheel • Registration documents: COC papers Retrofit accessories available on request: • 100 km/h approval • Storage box • Net hooks • Additional lashing rings Hnedpfx Agoyyw N Njysk • Reversing lights • Lashing straps • and much more. New vehicle with warranty and TÜV. ————— - Financing or leasing possible - Nationwide delivery possible - Vehicle registration document can be sent in advance or temporary number plates (Germany) can be provided - Export number plates including customs declaration available Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg More than 1,200 trailers immediately available from us! We have been an authorized dealer and service workshop for over 30 years: Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Errors, omissions and prior sale reserved -

Condition: new, *IMMEDIATELY AVAILABLE* Including rear ramp / parabolic suspension / Beavertail rear / spare wheel / bucket holder Technical Data: • Type: New vehicle • TÜV (Technical Inspection): New / 2 years • Availability: IMMEDIATE!! • Permissible total weight: 3,500 kg • Unladen weight: approx. 815 kg • Payload: approx. 2,685 kg • Internal dimensions: 400 x 180 x 23 cm (L x W x H) • Overall external dimensions: 600 x 234 x 168 cm (L x W x H) • Loading edge height: approx. 29 cm • Tyres: 12 inches • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Including vehicle documents Body/Construction: • Floor: 18 mm phenolic plywood • Sidewalls: full steel • Sidewall height: 30 cm • Chassis: KNOTT parabolic suspension • Tipping function: no • Hydraulics: - • Ramp angle: approx. 12° • Overrun brake & coupling: KNOTT • Frame/chassis: welded, hot-dip galvanized steel frame • Extension sides: none • Lashing rings: 10 outside, 8 inside • Supports: integrated within the ramp • Ramps: standing ramp on shaft • Lighting connector: 13-pin • Approval: COC documents Standard Equipment: • Lockable coupling head • Bucket holder • Spare wheel • Welded steel sidewall/frame construction, hot-dip galvanized by immersion • Very sturdy, bolted V-drawbar, reinforced • Sidewalls 30 cm high • Hot-dip galvanized steel loading ramps, upright • Very robust welded steel frame • Solid walk-on steel mudguards • Complete frame hot-dip galvanized by immersion • Parabolic spring axles (leaf suspension) • Beavertail rear / low loading angle for platforms and excavators • Multiple sturdy cross members for high point load capacity • 10 lashing rings mounted on outer frame (5 pairs), tensile strength 1,000 kg per ring • 8 lashing points mounted inside (4 pairs) • Automatic reverse function • KNOTT overrun device and parking brake • Sturdy ramp locks • 13-pin connector • Reversing lights • Large-size safety lighting • Integrated rear fog light • Rear frame lighting recessed • Rear side position marker lights • Centrally positioned automatic jockey wheel • Registration documents: COC papers Special Equipment Included: • Full-width rear ramp Optional Accessories (on request): • 100 km/h approval • Toolbox • Net hooks • Additional lashing points • Reversing lights • Lashing straps • and much more Brand new vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - Vehicle registration document can be sent in advance or transit number plates (Germany) can be provided. - Export number plates with customs clearance also possible Descriptions and images are copyright protected!! Hjdpfx Asyyw N Aogyjnk Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been specialized dealers & repair workshops for over 30 years for brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more. - Errors, changes and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Including rear ramp / parabolic spring suspension / sloped rear / spare wheel / bucket holder Technical Data: Hnedpfxsyyw Nvo Agyok • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATELY!! • Permissible gross weight: 3,500 kg • Unladen weight: approx. 815 kg • Payload: approx. 2,685 kg • Internal dimensions: 400 x 180 x 23 cm (L x W x H) • Overall external dimensions: 600 x 234 x 168 cm (L x W x H) • Loading edge height: approx. 29 cm • Tyres: 12 inch • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Vehicle documents included Vehicle construction: • Floor: 18 mm phenolic plywood • Side panels: all-steel side panels • Side panel height: 30 cm • Suspension: KNOTT parabolic spring suspension • Tipping function: no • Hydraulic: - • Ramp angle: approx. 12° • Overrun brake & braking system: KNOTT • Frame/chassis: welded fully galvanized steel frame • Extensions: no • Lashing rings: 10 outside, 8 inside • Supports: integrated in ramps • Ramps: standing ramp mounted on shaft • Lighting plug: 13-pin • Registration: COC (Certificate of Conformity) papers Standard Equipment: • Lockable coupling head • Bucket holder • Spare wheel • Welded steel sidewall/frame construction, hot-dip galvanized • Reinforced, very sturdy bolted V-drawbar • 30 cm high side panels • Upright, hot-dip galvanized steel ramps • Very robust welded steel frame • Heavy-duty, walkable steel mudguards • Complete frame hot-dip galvanized • Parabolic spring axles (leaf spring suspension) • Beaver tail rear / low access for work platforms and excavators • Numerous strong crossbeams for high point load capacity • 10 lashing rings mounted on the outer frame (5 pairs), tensile force 1000 kg per ring • 8 lashing eyes mounted on the inside (4 pairs) • Reversing automatic brake • KNOTT overrun device and parking brake • Sturdy ramp locks • 13-pin connector • Reversing lights • Large, high-visibility safety lighting • Integrated rear fog light • Recessed lighting in rear frame • Rear side position lights • Central automatic jockey wheel • Registration documents: COC papers Special equipment included in price: • Full-width rear ramp Optional accessories – available on request: • 100 km/h approval • Storage box • Mesh hooks • Additional lashing points • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - Vehicle registration document can be sent in advance or temporary number plates (Germany) can be provided - Export plates including customs clearance possible Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been specialist dealers & repair workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands - Errors, omissions and prior sale excepted -

Condition: like new (used), Year of construction: 2022, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 2200392094, total width: 680 mm, total length: 1,400 mm, total height: 1,270 mm, overall weight: 220 kg, cooling capacity: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cooling unit, For sale is an ICS water chiller in as-new condition. The unit has only been used by us for testing purposes for approximately 20 hours and is in excellent condition. All documentation, wiring diagrams, etc. are available. The system is currently located in our warehouse in 93476 Blaibach. Shipping via freight forwarder can be arranged and loading by forklift is not a problem. A photo of the nameplate is attached—hopefully this answers all questions. If not, please feel free to contact us. Hnsdpfxeyzq Nxs Agysk

Condition: new, functionality: fully functional, empty load weight: 620 kg, maximum load weight: 2,080 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 270 mm, total length: 4,900 mm, total width: 2,100 mm, tire size: 195 50 R 13C, tire condition: 100 %, color: silver, trailer brake: trailer braked, Year of construction: 2026, Vlemmix Construction Machinery Trailer 2.7 t NEW Vlemmix Construction Machinery Trailer 2.7 t – NEW | Internal dimensions: 3,000 × 1,500 × 270 mm | Tandem axle | KNOTT axles | Heavy-duty loading ramp with gas strut assist | Galvanized chassis Technical Data: Manufacturer: Vlemmix Model: Construction Machinery Trailer 2.7 t Condition: NEW Gross vehicle weight: 2,700 kg Body internal dimensions: 3,000 × 1,500 × 270 mm Chassis: Fully galvanized steel frame Axles: KNOTT tandem axle, maintenance-free rubber suspension axle Overrun brake: Yes, braked with auto-reverse Floor: 18 mm phenolic plywood, waterproof glued Loading ramp: Approx. 132 cm, heavy-duty, gas strut assisted Drawbar: V-shaped drawbar with support for excavator bucket Spare wheel: Spare wheel carrier fitted (wheel not included) Side panels: 27 cm high, robust steel construction Lashing points: 8 integrated tie-down lugs Lighting: Front marker lights, protected rear lights Tyres: 195/50 R 13C Connector: 13-pin plug Special features: Walk-on mudguards and integrated rear support Key Features & Equipment: - Heavy-duty steel frame & galvanized chassis – durable & robust - Waterproof glued 18 mm phenolic plywood floor - KNOTT tandem axles – maintenance-free rubber suspension with independent wheel suspension - Overrun brake with auto-reverse – safe & reliable - Heavy-duty loading ramp (132 cm) with gas strut assist - V-shaped drawbar with practical excavator bucket rest - Automatic rear support when ramp is open - Walk-on mudguards & heavy-duty automatic jockey wheel - 8 lashing eyes for optimal load securing - Protected lighting & 13-pin connection - Supplied with registration documents – ready to use immediately Areas of Application: ✓ Transport of mini excavators & compact machinery ✓ Construction companies & landscaping contractors ✓ Fibre-optic network expansion ✓ Municipal applications ✓ Machinery rental & service providers ✓ Equipment transportation & site logistics Hnsdpfjyyq Hzox Agyek Location: Warehouse D 46514 Schermbeck (NRW) – Viewing & collection possible Delivery Germany-wide & internationally on request Pricing ex works Maassenstraße 91, D 46514 Schermbeck (Wesel district) All information is without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Further trailers & transport solutions available! Also 3.0 t / 3.5 t machinery trailers, etc. ➡️ New & used trailers, accessories & spare parts Buy Vlemmix trailers | 2.7 t Construction machinery trailer NEW | 3,000×1,500 | KNOTT axles | Tandem axle | Phenolic plywood floor | Professional transport trailer Your reliable partner for construction machinery & transport technology: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Enquire now & secure immediately available new units! Virtual viewing via video call available on request.

Condition: used, mobile finest oil filtering technology, new The mobile ultra fine filter system M 130 is the flagship among the mobile filter systems. Equipped with a scalper, a (washable) pre-filter for coarse impurities (up to 5 µm, for example swarf), and two C-1000 housings, this system leaves nothing to be desired in order to process technical oils, water-/ oil- or oil-/water emulsions to excellent purities. The scalper and the pre-filter increase the life service of your systems and the filter elements significantly due to the two-stage pre-filtration. This is followed by the oil processing with the reliable ultra fine filter elements which are also used in space travel. You achieve purity values up to NAS 1 (ISO 4406: 13/10/7) and better Hnodpfx Ajgrz Hbogyok technical data M 130 flow oil: bis 1.050, 1.500, o. 2.100 liter/hour dimensions: height: ca. 1.175 mm, width: 585 mm, depth: 811 mm weight: ca. 93 kg Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Hodpfx Ajyilyqegyjnk Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: used, Year of construction: 2001, Overview  This shrink packaging machine (film only) was manufactured in 2001 by Italy SMI. The SMI LSK 45 is designed for film-only shrink wrapping of bottles in beverage production lines. The machine operates with 4 infeed lanes and supports multiple pack configurations and bottle formats. It was fully operational prior to dismantling in January 2026 and is currently dismantled. The machine is supplied with technical documentation. Technical data  Capacity: approx. 45 packs/min Formats: 3×2 / 3×3 / 4×3 Bottle formats: 500 ml / 1,000 ml / 1.5 L / 2.0 L Application: Shrink packaging (film only) Configuration: 4-lane infeed system, shrink film wrapping unit, shrink tunnel Scope of Delivery Shrink packaging machine | SMI | LSK 45 | 2001 | Film-only shrink wrapper with 4-lane infeed Shrink tunnel | SMI | 2001 | Integrated shrink tunnel Conveyor system |  With lane separation Control system | Control panel with Gefran temperature controller Hnedpfx Agjyycgteyjk

Condition: used, tank capacity: 12,220 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tanks; 1 manhole approx. 340 x 440 mm in the front bottom Overall width: 1,480 mm Overall height: 2,700 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Hnedpfx Agoyckupeyok Volume: 12,220 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Discharge: DN40 DIN 11851 MATERIAL SPECIFICATION Temper system material: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Level indicator (without guarantee) Design: upright Remarks: Manhole diameter: approx. 420 x 320 mm Internal diameter: 820 mm Total height: 2,350 mm Heating/Cooling: available Max. permissible operating overpressure: 6.0 bar Base type: feet Location: external storage Technical documents: drawing Cylinder tempering: Thermoplate Hjdpex Dmbgsfx Agyonk Volume: 1,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 1,238 mm TANK Number of feet: 3 pcs EQUIPMENT Manhole / Dome: in the cylinder Outlet: DN50 DIN 11851 MATERIAL CHARACTERISTICS Exterior surface: marbled

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: Level indicator (without guarantee), crane lugs Design: upright Remarks: Manhole diameter (cylinder): approx. 420 x 320 mm; 2 thermoplates in the cylinder area Internal diameter: 1,800 mm Total height: 3,925 mm Heating/cooling: available Hedpfxex Dmb Te Agysnk Max. permissible operating overpressure: 6.0 bar Support design: feet Location: external storage Technical documentation: drawing Cylinder temperature control: thermoplate Volume: 8,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 2,976 mm TANK Number of feet: 3 FEATURES Manhole / dome: in the cylinder, in the top (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Outer surface: marbled

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 17,000 kg, operation weight: 17,000 kg, Year of construction: 2009, operating hours: 6,330 h, Keestrack Combo/3 Fraction/Screen/Various Screen Decks/Radio Remote Control • Manufacturer: Keestrack • Model: Combo 2712 T • Year of manufacture: 2009 • Operating hours: 6,330 h • Screen box: L: 2.70 m x W: 1.20 m • Fine material belt under screen box: L: 3 m x W: 80 cm • Oversize material conveyor: L: 4.50 m x W: 1 m • Left side conveyor (fine fraction): L: 8 m x W: 65 cm • Right side conveyor (medium fraction): L: 8 m x W: 65 cm • Crawler chassis: L: 3.55 m x W: 40 cm • Radio remote control • Engine: Deutz 4 cylinder diesel engine • Gross weight: 17,000 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. Hsdpfx Agoyyyq Noyenk - Interim sale reserved, - Errors and/or typographical mistakes excepted. - Sale according to our terms and conditions.