Used Müga Vertical Machining Center for sale (72,472)

Condition: good (used), Year of construction: 2012, Machining center Eumach TVMC 2000 - 5-axis XYZ: 2000 x 750 x 750 mm A: 360 degrees B: 120 degrees Spindle speed: 14,000 rpm Spindle: SK 40 Weight: 22,000 kg Lhjdszy D Dqepfx Aiqol

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 8.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis! Lhsdpfxoxx A Ewo Aiqel

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 0-250-11-2627, functionality: fully functional, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, workpiece weight (max.): 60 kg, number of axes: 3, total height: 2,500 mm, total length: 2,500 mm, overall weight: 3,200 kg, table width: 4,740 mm, Equipment: CE marking, documentation/manual, HOMAG / WEEKE OPTIMAT BHX 200 CNC – Year of manufacture 2016 – HSK63 9 kW – Clamex-P – automatic tool changer – extensive equipment We are selling our HOMAG / WEEKE OPTIMAT BHX 200 vertical CNC machining center, manufactured in 2016. We purchased the machine directly from HOMAG Polska in 2018. Before the purchase, the machine was presented at a trade fair in Germany. It was exhibited with a very extensive range of equipment, which was one of the main reasons for our purchase. Originally, we planned to integrate the BHX 200 into our production line as part of further automation by connecting it to an industrial robot. Ultimately, we did not receive EU funding for this investment. At the same time, our current production volume is not large enough to utilize the full potential of this machine. This is also evident in the relatively low operating hours. Lodpfx Aszzxzmsiqohl For this reason, we have decided to sell the machine. The BHX 200 has served us reliably for many years and is still in continuous production today. We use it to manufacture furniture components from sheet materials. The machine operates very precisely and reliably and is ideally suited for flexible furniture production. This is not a basic BHX 200 with standard equipment. The machine has a very extensive configuration for drilling, milling, grooving, and hardware processing. Equipment: * Vertical drilling head V15 High Speed with 15 individually controlled spindles * 6 horizontal drilling spindles in the X-axis * 4 horizontal drilling spindles in the Y-axis * Additional vertical 3-spindle drilling head for hardware * HSK63 milling spindle * Power up to 7.5 / 9 kW * Speed range 1,250–24,000 rpm * Automatic tool changer * Automatic pick-up tool magazine with 4 positions for HSK63 tools or units * Special unit for Lamello Clamex-P * Unit for grooving in the X and Y axes * Optical workpiece control in X and Y * Automatically positioned workpiece clamps * Automatic adjustment to workpiece thickness * Integrated 1D/2D barcode system including wireless Datalogic barcode scanner and base station Workpiece dimensions: Length: 200–3,050 mm Width: 50–1,250 mm Thickness: 8–80 mm Maximum workpiece weight: 60 kg Control system and software: * HOMAG powerControl / powerTouch * 21.5" Full-HD touchscreen * woodWOP * DXF Import Basic * Tool database * Production list management * woodScan * Ethernet * UPS * ECO Plus * Climate control for the control cabinet The particular strength of this machine lies in its versatility. It is particularly suitable for manufacturers who produce many different types of furniture, sizes, and small to medium batch sizes. The combination of vertical and horizontal drilling, milling, grooving, Clamex-P processing, and automatic tool changer allows a very large number of machining steps to be performed on a single machine. The machine is available immediately. We are confident in its very good technical condition. It is still in use in our production. An inspection and demonstration of the machine in operation can be arranged by appointment. Location: Białystok, Poland.

Condition: excellent (used), Year of construction: 2004, CNC MACHINING CENTER Kunzmann BA 1200 Year of manufacture 2004 Heidenhain TNC 530 Lodpfx Aiswm Dkyoqjhl Technical specifications: X-1200 Y-700 Z-750 Spindle max. 8000 rpm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Lhodozxf Inopfx Aiqol Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h EQUIPMENT Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Paper band filter

Condition: excellent (used), Year of construction: 2000, number of slots in tool magazine: 12, Equipment: chip conveyor, documentation/manual, Chiron FZ08W Magnum vertical machining center Sinumerik 840D control Max spindle speed: 15,000 rpm X = 300 mm Y = 250 mm Z = 250 mm Lodpfx Ajzznm Ejiqehl 2 x 4th axis Peiseler RT 100 Tool holder: HSK 32 ATC: 12 positions The machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I am offering a 3-month start-up warranty.

Condition: used, Year of construction: 1991, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 409 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, table width: 375 mm, table length: 1,060 mm, table load: 250 kg, spindle speed (max.): 6,000 rpm, Machine type: Vertical machining center Travel in X: 450 mm (17.7") Travel in Y: 310 mm (12.2") Travel in Z: 409 mm (16.1") Table size: approx. 1060 × 375 mm Max. table load: approx. 250 kg / 550 lbs Spindle speed: 6,000 rpm Main drive: 3.4–5.5 kW Tool changer: 8-position ATC Lhodpfx Ajzau T Rsiqel Rapid traverse: up to approx. 12 m/min Control system: Heidenhain Machine weight: approx. 2,100 kg Dimensions: approximately 1.9 × 1.88 × 2.22 m

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 9909220, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: FADAL, workpiece weight (max.): 800 kg, total height: 2,200 mm, total length: 2,900 mm, total width: 2,400 mm, table width: 508 mm, table length: 1,220 mm, overall weight: 4,800 kg, number of spindles: 1, number of slots in tool magazine: 21, input voltage: 230 V, type of input current: three-phase, Equipment: documentation/manual, For sale: a reliable American CNC milling machine. This machine is from the renowned HT series – the most powerful and sought-after Fadal version. It features dovetail guideways, is rigid, heavy-duty, and designed for machining steel. The machine is in working order and can be inspected while powered on in Środa Wielkopolska. Ljdpfxeztcz Is Aiqohl

Condition: used, Year of construction: 2015, operating hours: 38,504 h, functionality: fully functional, torque: 200 Nm, controller manufacturer: Siemens, controller model: 840D solutionline Operate, rotational speed (max.): 10,000 rpm, overall weight: 9,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 12,935 h, number of spindles: 1, number of slots in tool magazine: 60, DMG MORI DMC 1450 V Vertical Machining Center | Year of Construction 2015 | SK40 & 60-position Magazine For sale is a robust and precise vertical machining center from the manufacturer DMG MORI, model DMC 1450 V. This machine, built in 2015, is extensively equipped, including with internal cooling, a direct path measuring system, and a 10,000 rpm spindle with 200 Nm of torque. In 2021, the spindle was professionally replaced after an incident. General Machine Data * Manufacturer: DMG MORI * Model: DMC 1450 V * Year of Construction: 2015 * Machine Number: 14595607194 * Operating Hours: 38,504 h * Spindle Hours: 12,935 h * Machine Weight: 9,900 kg Control System * Type: Siemens 840D solutionline Operate 3D control system Spindle * Speed: 10,000 rpm * Torque: 200 Nm * Tool Clamping: SK40 * Note: Spindle replaced after incident in August 2021 (according to service history) Tool Changer * Magazine Positions: 60 positions * Tool Clamping: SK40 Ljdpfx Aiszypzzsqohl Coolant & Disposal * Internal coolant supply (IKZ): Basic package 3 * Blow-through air through the spindle center * Coolant/air switching * Flushing gun for chip flushing * Oil and emulsion mist separator (mechanical) Additional Equipment & Measuring Technology * Path measuring system: Direct path measuring system X, Y, Z * Measuring probe: Infrared TS649 DMG * Enclosure: Operating mode 4 * Software: DMG Netservice - client Excerpt from the Service History * 10/2022: Complete replacement of the X-axis bellows * 03/2022: Replacement of the Y-axis roof * 12/2021: Replacement of the left-hand blind * 10/2021: Timing belt renewed * 08/2021: Spindle replacement after incident * 2020/2021: Work/replacement on the OP019 TFT 19" screen From an insolvency proceeding, sold as is. Offer deadline: September 30, 2026, 6:00 PM. Package price possible for multiple machines from this proceeding. Inspection: September 16, 2026, 10:00 AM - 12:00 PM, Fraunhoferstraße 10-12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM - 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH homepage under Auctions.

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: FANUC, controller model: 0i-MF Plus 10,4", total height: 3,438 mm, total length: 4,400 mm, total width: 3,900 mm, table width: 800 mm, table length: 1,700 mm, overall weight: 13,000 kg, spindle speed (max.): 1,200 rpm, coolant supply: 30 bar, distance table center to spindle nose: 920 mm, spindle motor power: 25,000 W, spindle nose: ISO 40 (DIN 69871), number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, New vertical machining centre equipped with a FANUC 0i-MF Plus control, 10.4" display, including Manual Guide I and AICC II. Table measuring 1,700 × 800 mm with a permissible load of 2,000 kg/m². Axis travels of 1,650 mm in X, 800 mm in Y and 800 mm in Z. Table-to-spindle-nose distance from 120 to 920 mm; spindle centre to column 882 mm. Cutting feed of 1 to 15 m/min, with rapid traverse rates of 36 m/min on the X and Y axes and 24 m/min on the Z axis. Lhodpfjzw Ex Dox Aiqsl Direct-drive DDS spindle with ceramic bearings, 7/24 steep taper ISO 40 to DIN 69871, 12,000 rpm and a power rating of 15 to 25 kW. All three axes run on roller-type linear guideways (PMI, Taiwan) with preloaded ball screws. Swing-arm automatic tool changer with 24 stations, accepting tools up to 80 mm in diameter, 300 mm in length and 8 kg in weight. Through-spindle internal coolant supply at 30 bar with filtration unit, oil/coolant separator, hinged-belt chip conveyor combined with two screw-type chip augers, and a rear chip flushing system with coolant gun. Fully enclosed splash guarding with interlocked front door, spindle oil chiller, heat exchanger, automatic centralised lubrication and air-conditioned electrical cabinet. Rigid tapping cycle, eight open M-functions, data server with Ethernet connection and 2 GB memory card. Three-colour signal light, dustproof electrical system, spindle air seal and levelling bolts with pads. Machine supplied without counterweight. Power supply via a 400 V / 50 Hz three-phase transformer rated at 30 kVA; compressed air requirement 6 to 8 bar. Overall dimensions 4,400 × 3,900 × 3,438 mm, extending to 5,500 mm in length with the chip conveyor fitted. Machine weight 13,000 kg. CE certified.

Condition: used, Year of construction: 2012, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm CNC-control HEIDENHAIN TNC620 table-size 1200 x 560 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 10.000 U/min drive capacity - spindle motor 13 kW feed stepless 20.000 mm/min Lhjdow A Spvopfx Aiqel rapid traverse 25 m/min tool change unit 20 Pos. coolant IKZ 20 bar voltage 400 V total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 2,55 x 2,30 x 2,25 m chip conveyor 3,90 x 0,95 x 1,60 m - Serial No.: 1539000377A - Machine ON: 21.689 h - Program Run: 9.021 h - CNC-Control: Heidenhain TNC620 - elektronic hand wheel - chip conveyor - coolant through spindle 20 bar

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1101058, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer a used Haas VF-2SS vertical machining center, manufactured in 2013. - Manufacturer: Haas - Model: VF-2SS - Year of manufacture: 2013 - Technical condition: used, very good - Serial number: 1101058 - Machine type: vertical machining center The machine is fully functional and in continuous use. Throughout its operational life, it has primarily been used for machining soft materials – 90% of the work performed involved machining aluminum in a single-shift system. The machine has no history of accidents, has been operated by a single employee for the past 4 years, and operates correctly, being maintained in good technical condition. In 2022, it was transported from our branch in Germany to Poland, where it has been in operation since it was new. Lsdpfxezzcmaj Aiqehl Included equipment: - Renishaw tool probe, - Renishaw workpiece probe, - external Haas coolant filter, - standard Haas machine equipment. - the machine is sold without a vise or fixtures. The machine is ready for further operation and can be inspected. It is possible to start the machine and demonstrate its operation. If you have any questions, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2020, Year of manufacture 2020 Siemens 840D sl Left and right working area X 615 mm Y 290 mm Z 500 mm Motor-driven milling spindle max. 12,500 rpm HSK T63 Lhodpew T Scpofx Aiqsl Tool magazine with 64 stations Rotary-swivel unit max. speed 4,200 rpm Chuck 2 x 315 mm Workpiece loading for chuck and finished parts via dual feed belt Gantry with magnetic gripper max. 35 kg Discharge conveyor Chip conveyor Coolant system KNOLL 600 1,400 liters 70 bar Coolant cooling Supply through spindle, 3 pressure stages Air cooling etc. Please request further technical data via email.

Condition: not inspected (used), Year of construction: 2007, operating hours: 19,028 h, machine/vehicle number: AB1007, Vertical machining center Spinner MVC 610, year of manufacture: 2007 Delivery terms: Free on truck Location: 74906 Bad Rappenau Collection: The machine must be collected on 07.10.2026. The exact collection time will be arranged in advance. Payment terms: Payment in advance - by bank transfer Technical data: Lhjdpfx Aszx S Rpsiqjl Travel in X-axis: 610 mm Travel in Y-axis: 500 mm Travel in Z-axis: 500 mm Rapid traverse X / Y / Z: 24 m/min Table size: 800 x 450 mm Max. workpiece weight: 500 kg T-slot size: 18 mm Max. spindle speed: 10,000 rpm Spindle taper: SK 40 Spindle drive power: 18.5 / 12.3 kW Tool changer: 24-position Max. tool diameter: 70 mm Max. tool length: 250 mm Max. tool weight: 8 kg Tool change time: 2.5 sec. Control system: Siemens 810D / 840D with Shopmill Feed motor X / Y / Z: 3.5 kW Coolant pump standard: 0.53 kW Coolant pump high pressure: 3 kW Compressed air requirement: 6 bar Scope of delivery: Available manuals as shown in the pictures Available accessories as shown in the pictures Two vices as shown in the pictures Measuring probe Two cabinet units with hinged doors and contents as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 3000 x 2500 x 2600 mm Weight approx.: 4000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►On request, we can offer transport to the desired location. ►The quoted price is net plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, table width: 600 mm, table length: 1,300 mm, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, Awea BM1200 Machining Centre Year 2006 Travels: 1200x600x600 mm Heidenhain TNC530 CNC SK40 Spindle 8000 rpm with gearbox Integrated 4th axis divider Spirsin Through spindle coolant Ledpfswvi Nmjx Aiqohl

Condition: excellent (used), Year of construction: 2009, operating hours: 3,262 h, functionality: fully functional, machine/vehicle number: 1072682, overall weight: 6,000 kg, HAAS VF-3SSHE CNC vertical machining center, manufactured in January 2009, available for sale. Condition: Excellent condition, fully operational, all inspections / services done. Visible features and equipment: • Inline direct-drive spindle • Maximum spindle speed: 12,000 rpm • High-speed tool changer • Through-spindle coolant (TSC) Lhodpfx Aoz Ag Nuoiqsl • Electrical supply: 360–480 V, three-phase, 50/60 Hz • HAAS CNC control Recorded operating hours: • Power On Time: 3,262 h 57 min • Cycle Start Time: 1,251 h 29 min • Feed Cutting Time: 1,103 h 02 min • M30 cycle count: 5,815 h The machine can be inspected in Baia Mare, Romania. Price: 38.500 EURO Price does not include tools and spare parts.

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 40, Hedelius BC 80 Ledpfxjzx Ecxe Aiqohl This machine was primarily used for pre-milling operations at our facility until January and is currently out of service due to a hard drive malfunction. It has a Heidenhain control system, and the 4th axis is prepared but has never been installed. The drives were functioning without any issues; however, the spindle makes noise at higher speeds. As we need the space for our assembly operations, we are offering the machine for sale. Our asking price, ex works, is 6,000.00 Euros.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: B-7302, Milling machine Kondia B640 Year of manufacture: 2004 Control: Heidenhain iTNC 530 TOOL MEASUREMENT System: Tool Eye TOOL CHANGER Magazine capacity: 22 tools TRAVELS X-axis: 600 mm Y-axis: 400 mm Z-axis: 510 mm MAIN SPINDLE Speed: max. 12,000 rpm New main spindle: overhauled in 2020 Tool holder: BT 40 TABLE Clamping area: 800 x 400 mm COOLANT IKZ 20 bar External coolant supply Spindle cooling ACCESSORIES Chip conveyor Various tool holders Various clamping pins Machine documentation Lsdpfx Ajzilxnoiqohl

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: B-7270, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, TECHNICAL DATA Manufacturer: KONDIA Model: B-1050 Year: 2004 Control unit: Heidenhain iTNC530 Serial number: B-7270 TABLE DIMENSIONS Work area: 1200 x 500 mm. T-slots (Nº x Width x Distance): 5 x 18 x 100 mm. Table to floor height: 885 mm. TRAVEL X: 1,000 mm. Y: 500 mm. Z: 610 mm. SPINDLE Spindle taper: BT40 Speed range: 12,000 rpm Distance spindle to table surface: 140-750 mm. FEEDS Cutting feed rate: 0-30,000 mm/min Rapid traverse rate: 30,000 mm/min ACCURACY Position accuracy (scales): 0.01 Repeatability: 0.006 Resolution: 0.001 MOTOR Lhodpfszlycyex Aiqsl Spindle motor: 7.5 Kw. AUTOMATIC TOOL CHANGER Nr. of tools: 18 Max. Ø (adjacent tools): 85 mm. Max. Ø (non-adjacent tools): 135 mm. Max tool length: 250 mm. Max. tool weight (1 tool): 6 Kg. Tool taper: ISO 7.388 / BT40 Pull stud bolt: ISO 7388-1 / 2-AJIS B 6.339 WEIGHT Aprox. Weight: 5,500 Kg.

Condition: used, Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, OPS Ingersoll OPS 550 – HSC Milling Machine (Year of Manufacture 2007) with Tool Changer & Extraction System Manufacturer: OPS Ingersoll Funkenerosion GmbH Model: OPS 550 Year of Manufacture: 2007 Machine No.: 655029 Made in Germany The OPS Ingersoll OPS 550 is a precise and powerful high-speed milling machine (HSC) designed to meet the highest demands in toolmaking, mold making, and precision component manufacturing. Featuring an integrated tool changer, a high-performance extraction system, and a user-friendly control unit, it provides optimal conditions for efficient and highly precise work. Equipment & Features Integrated tool changer with multiple tool positions Ljdpfx Ajw I Sm Djiqjhl Extraction system for clean operation OPS control unit with screen, keyboard, and emergency stop Precise HSC machining for fine contours and complex shapes Robust machine construction for lasting precision Technical Specifications Power supply: 400 V, 3-phase, 50 Hz Control voltage: 24 V DC Rated current: 63 A Power consumption: 55 A Year of manufacture: 2007 Errors, typographical mistakes and prior sale excepted.

Condition: used, 20-position tool changer Lsdpfx Aiezz Hqvsqohl Operating hours: approx. 5,886 hours Footprint: approx. 1700 x 2500 x 2700 mm

Condition: used, Year of construction: 2003, Control system: MSG-501 Machine weight: approx. 6,700 kg Operating hours: 1,507 h Footprint: approx. 2,600 x 200 x 3,400 mm X-axis travel: 800 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table-to-spindle distance: 150–660 mm Table size: 1,100 × 600 mm Table load capacity: 1,000 kg Lhjdpfezz Hnuex Aiqel T-slots: 6 × 18 mm Max. spindle speed: 8,000 rpm Optional spindle speed: 15,000 rpm Spindle taper: No. 50 / BT-50 or CAT-50 Spindle bearing inner diameter: 100 mm Rapid traverse X/Y/Z: 42,000 mm/min Cutting feed rate: 1–6,000 mm/min Tool magazine: 30 tools Optional tool magazine: 60 tools Max. tool diameter: 120 mm Max. tool diameter without adjacent tool: 240 mm Max. tool length: 350 mm Max. tool weight: 20 kg Spindle motor: 30 / 25 kW Coolant tank: 230 l Electrical connected load: 55.6 kVA Machine height: 2,640 mm Space requirement: 2,728 × 2,620 mm Machine weight: approx. 6,700 kg

Condition: used, Year of construction: 2018, Technical details: x-travel: 711 mm y-travel: 406 mm z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm spindle taper: SK 40 Tool changer: 18+1 rapid travel x/y/z: 61 m/min feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Lhodpjzxz Hgofx Aiqjl Accessories: - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: used, Year of construction: 2009, Technical details: x-travel: 1100 mm y-travel: 600 mm z-travel: 510 mm control: Heidenhain iTNC 530 table-size: 1050 x 600 mm table load: 500 kg spindle taper: SK 40 turning speeds: 10000 1/min power capacity at 100 % load: 9 kW rapid travel x/y/z: 24 m/min feed: 24 m/min Tool changer: 40 SK 40 dimensions of the machine ca.: 4,3 x 2,6 x 2,25 m weight of the machine ca.: 8,8 t POS mill 1100 vertical machining center in very good condition from 2009 Options: - parts measuring M&H receiver without probe - external hand wheel Heidenhain HR 410 - Air supply through spindle - air gun Lodpfxjzxz Evs Aiqohl - paperfilter system with coolant through spindle 40 bar - *

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 120J434, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, controller model: FANUC 18 M, table width: 550 mm, table length: 1,200 mm, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, Table size 1200 x 550 mm Lhjdpfeymmh Tsx Aiqsl Longitudinal travel 1020 mm Cross travel 610 mm Vertical travel 560 mm Max. distance spindle to table 710 mm Max. load on table 1.000 Kg Spindle speeds 10.000 rpm Rapid movement 24 m/min Tool change 24 pcs Spindle taper ISA 40 Control FANUC 18 M Cycle hours 7100 Timer