Used Müller Nh2-400A for sale (1,111)

Condition: good (used), Foliant Vega 400A Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing. Very good condition. Year of manufacture: 2015. Description: – High stack feeding (elevator) – Automatic separator – Pneumatic roller pressure – Sheet straightening module – Built-in compressor for blowing and vacuum (Becker) – Jogger on the sheet outlet Feeding system: Pneumatic belt Feeding stack height: 30 cm Max. Capacity: 2100 B3 sheets/h Maximum lamination speed: 18 m/min Hsdpfx Ajziyq Eeb Aet Temperature: 20 – 140°C Heating time: 8 min Installed power: 3000 W Power supply: 230V Weight: 320 kg Made in the Czech Republic.

Condition: excellent (used), empty load weight: 2,532 kg, maximum load weight: 8,368 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,450 mm, Year of construction: 2020, Tandem low-loader Müller-Mitteltal ETUE-TA-ER 11.9 First registration: 12/2020 11,900 kg total weight 8,368 kg payload 2,532 kg tare weight - 6.2 meter loading length - 2.45 meter internal width - incl. aluminum ramps with ramp compartment - Ramps 40/330 cm - Support legs at the rear - Height-adjustable drawbar Hedpfx Abezi Aztj Ast - GALVANISED! - In excellent, original condition and ready for immediate use! - incl. registration documents Selling price: €14,900 net Affordable delivery also possible!

Condition: used, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2008, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, German trailer, * 30-ton capacity * Extendable to 3 meters * Spring-loaded ramps * 50mm drawbar eye * Air suspension Hedpfx Aey Trntsb Ast New TÜV (technical inspection) available for an additional charge!!! For further information, please call Christian Bredemeier.

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA Hsdpey Spl Hefx Ab Aet TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB + INOX STOCK TUB 700 LITERS WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Condition: used, empty load weight: 3,500 kg, maximum load weight: 9,500 kg, overall weight: 13,000 kg, axle configuration: 2 axles, first registration: 11/1993, loading space length: 5,000 mm, loading space width: 2,200 mm, loading space height: 500 mm, suspension: steel, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, 2 axles, tandem axle, leaf spring suspension, lashing eyes, side guards, front supports, swing-out tailgates. Hjdpfx Aozgu Sfjb Aet Superstructure: Tandem 3-way tipper trailer. Spare wheel available at an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, pressing force: 630 t, table width: 2,500 mm, table length: 1,600 mm, overall weight: 100,000 kg, Equipment: safety light barrier, Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. Hjdpsv Hp T Uofx Ab Ast New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 2005, functionality: fully functional, Used Muller model FTHSM 301 stainless steel drum lifter/blender. Suitable for blending, lifting, inverting and swiveling different type of barrels. Total height of column is 3400 mm, maximal lifting height (clamp axis) approx 2700 mm, maximum load up to 150 kg. Blender has following options: - blending: 2-10 rpm, rotating 360°, manually adjustable clamp inclination up to 30°, adjustable blending time 1-99 min. - inverting: 2 rpm, range 0-180° Hsdpfxszh Enme Ab Aot - lifting/lowering: 3m/min - swivelling: manually, max 350° - has a universal clamp with manual clamping operation by handwheel. Includes control panel.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Tube diameter outside: 180 mm -Piston: Ø 115/145 mm Hodpfob A H Ryjx Ab Ast -Stroke: 620 mm -Weight: 87 kg

Year of construction: 1959, condition: ready for operation (used), pressing force: 204 t, stroke length: 500 mm, Metal press manufactured in 1959. This Müller SE 201.1.1 /32 features a T-slotted table and includes a optional hydraulic unit. The machine is in production environment and is used. If you are looking to get high-quality metal pressing capabilities, consider the Müller SE 201.1.1 /32 machine we have for sale. Contact us for further details. Hodpfjzf Nd Tjx Ab Aot • Machine Type: Hydraulic 4-Column Press • Retrofit: 1984 • T-Slotted Table: Yes • Hydraulic Unit: optional • Condition: UsedMaximum stroke and pressing force may vary slightly

Condition: used, with Tersa knife shaft used, good condition Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Hedpfsvwgh Rex Ab Aet Weight approx. 2000 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: used, maximum load weight: 10,080 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 08/2017, next inspection (TÜV): 08/2026, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, loading space volume: 6 m³, Year of construction: 2017, Equipment: ABS, Stock No. 5820 Müller-Mitteltal 3-sided steel tandem tipper trailer / aluminum ramps / galvanized chassis / wide tires! ----* Manufacturer: Müller-Mitteltal * Type: KA-TA-R 13.5 Hsdpfx Aszdm S Sob Aet * First registration: 08/2017 * Gross vehicle weight: 13,500 kg * Unladen weight according to vehicle registration: 3,420 kg * Payload: 10,080 kg * Axles: 2 x Gigant / drum brakes * Suspension: leaf spring suspension * Tires: 385/55 R 19.5, approx. 50% tread, on steel rims * TÜV (technical inspection): 08/2026 * EBS * Color: galvanized chassis, blue tipper body * Tipper interior: approx. 6 m³ (5.00 m long x 2.42 m wide x 0.50 m high) * Extendable aluminum ramps * Towing hitch with 50 mm eye, height-adjustable * Tipper body with 4 pairs of folding lashing eyes in the floor * Front support for full load * Additional supports at the rear (folding) * Front toolbox on the right side * Quarter fenders * Load securing certificate * 1st owner German trailer !! German documents !! 1st owner !! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the details. We assume no liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, The device is complete and operational – it was previously used in conjunction with a Pitney Bowes XPV inserter. The issue that needs repair concerns only the reading function. Hodsyq Rm Uopfx Ab Aet

Condition: used, functionality: fully functional, The device is complete and operational – it was previously used in conjunction with a Pitney Bowes XPV inserting machine. Hjdpfxjy Izcpo Ab Aet

Condition: used, Year of construction: 2007, Müller Martini Acoro A7 Year: 2007 / 2000 / 1999 Consisting of Gathering machine Müller Martini 3693 Year: 2007 Description: - Chain tensioning station - Hand feeding station - Number of gathering stations: 15 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - PIAB Hodpfx Abek H Sfhs Aot - Reject gate for incomplete products: 3715 - Intermediate element - Book block feeder: 3642 - Transfer into the binder Perfect binder Müller Martini Acoro A7 - 3027 - 22 Year: 2007 Description: - Semi automatic setting - Colour monitor with touch screen - Book measuring table: 3013 - Number of clamps: 22 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - PUR spine gluing unit, interchangeable (nozzle) - PUR premelter for PUR spine glue unit: Meler Micron Pur - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Drum cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Müller Martini Description: - Transport system, length (approx): 60 mtr - Escape delivery Three knife trimmer Müller Martini Merit S - 3671 Year: 2000 Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Book stacker Müller Martini CB 16 - 3631 Year: 1999 Description: - Compensating stacker - Turning device - Delivery to the right

Condition: used, Year of construction: 2009, Three knife trimmer Müller Martini Orbit (3675) Year: 2009 For three side trimming of book blocks and brochures, operable in connection with soft- and hardcover book production lines. Description: - Colour monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 72 mm Maximum size (cutted): 304 x 303 mm Hsdpfx Abswuthws Aet Minimum size (cutted): 136 x 70 mm Book thickness: 2 - 80 mm Max. mechanical speed: 1.000 to 7.000 cycles/hr Condition: This machine is offered fully cleaned and checked in good running condition Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Müller Martini Primera C130 gathering machine Year of manufacture: 2007 (2013) - 6 flat-pile feeders 0379 (2013) - sequential on/off switching - 1 cover feeder 0507 (2013) - ASIR 3 - SEMKO at the front and rear - First copy control Hjdpfx Aozdytceb Aot - 1 stitching head 0383 (retrofitted, status 2013) - 2 standard stitching heads HK 75Q - 2 loop stitching heads HK Oe Q6/8 - 1 three-knife trimmer 0449 (retrofitted, status 2013) - 1 central trimming unit - 1 cross-laying unit Perfetto - PIAB air system

Condition: used, Year of construction: 2000, Saddle stitcher Müller Martini Prima Year: 2000 The PRIMA from Müller Martini is the ideal saddle stitcher for the versatile bookbindery, where the shortest changeover time are decisive. - Number of chain stations: 9 - Horizontal signature feeders: 7 x 370 - Cover feeder: 1529 - Excluding pump(s) Stitching unit Müller Martini 390 - Oblique sheet control - Thickness control - Stitching heads: 2x HK 75 - Reject gate, for incomplete products Hodjvxf Sqspfx Ab Ajt Trimmer Müller Martini 360 - Sets of knives: 2 Delivery Müller Martini 310 CS-14 - Compensating stacker Description modified on 29-5-2025!

Year of construction: 1968, condition: ready for operation (used), pressing force: 306 t, stroke length: 400 mm, Hydraulic 4-Column Press manufactured in 1968. This Müller SE 300-25.1.1 is designed for metal pressing applications, featuring a stopping time of 89 ms and a stopping distance of 75 mm. If you are looking to get high-quality metal forming capabilities, consider the Müller SE 300-25.1.1 machine we have for sale. Contact us for further details. • Machine Type: Hydraulic 4-Column Press • Application Type: Metal Press / Forming Press • Stopping Time: 89 ms • Stopping Distance: 75 mm Hsdpfezd Dmajx Ab Aot • Safety Distance: 160 mm

Year of construction: 2021, condition: used, MULLER MARTINI Casing-In Machine EMP 513 type K317 year 2021 For casing-in of flat spine book blocks into hard covers, as well as subsequent pressing and joint-forming of books. To be used as an individual machine. Configuration: copilot system with 2 touch screens block supply via feeding conveyor and star feeder case prestacking conveyor case magazine case bending machine case forming station casing-in gluing station with profile rollers and adjustable double glue application for the book joint area glue circulation system with pump EMP glue pump monitoring unit rubbing down unit and thin book device electronically heated 15° joint forming rails, controlled in pairs via regulator quick-change system for joint forming rails 2 pressing stations heater monitoring unit servo-controlled drive technology based on Siemens SIMOTION D delivery to the left, transport of books lying flat Special equipment: photo book block splitter hotmelt nozzle gluing unit for joint gluing NORDSON premelter Code-Matching (comparison) between book block and case via data matrix code, barcode sensor: Cognex camera double case control special equipment for the processing of flexible cases Technical specifications: mechanical speed: up to 30 cycles/min size range book block max.: 280 x 375 x 80 mm size range book block max.: 305 x 375 x 30 mm size range book block min.: 100 x 100 x 2 mm size range opened case max.: 660 x 385 mm size range opened case min.: 210 x 105 mm thickness opened case max.: 7,0 mm thickness opened case min.: 0,1 mm size range finished book max.: 285 x 385 x 90 mm size range finished book max.: 315 x 385 x 30 mm size range finished book min.: 105 x 105 x 6 mm KOLBUS Transport Conveyor System Hjdpfx Absyr Hk So Aet year 2021

Year of construction: 2013, condition: used, Sewing machine Müller Martini Ventura MC (3215) Year: 2013 Description: - Colour monitor with touch screen - Semi automatic setting - Feeder - ASIR Automatic Signature Image Recognition: Asir III - 2 + 2 opening possibilities - Book block separator - Book stacker Hodpfx Abermyp Rj Ajt - Roller table delivery - PIAB/Venturi

Condition: used, Year of construction: 2001, Three knife trimmer Müller Martini Merit S Year: 2001 Hour counter: 30400 Description: - Digital display - Infeed conveyor from the left - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Maximum size (uncutted): 384 x 320 mm Hodpfx Aeylblksb Ast Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 434 x 310 x 80 mm Minimum size (cutted): 136 x 100 x 2 mm Max. mechanical speed: 1.000 - 4.000 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Year of construction: 2016, Müller Document Logistics System, envelope inserting machine – used: Price ex works: €39,500.00 (net)! Manufacturer: Müller Type: 2016 Year of manufacture: 2016 6984F: Outfeed tray incl. STOP 6978D: Envelope turner 8006C: Envelope inserting machine C5 / DIN long (approx. 6,000 cycles/hour) 6628C/4: Multi-channel system 6825C: Folding machine (top and bottom) incl. STOP incl. stop function in/out 6822C-SCHALLSCH: Soundproofing for folding machine 6822C-SCH-36583: Soundproofing for 6825C 6786D-L: Collection tray 6730C-L-STOPP: Transfer station 6692D: Sequencer 6784C-L: Transfer station 6600D-12K: Cutting machine incl. power supply 6600BH: Brush holder 6875C: Center knife A4, from stack, 2-up, pinfeed, face up / foot forward, always 2 sheets, Sequence Z-A New price: over €100,000.00 Hedpfxozcxxpo Ab Ast Condition: good Available: immediately Location: Lohne

Condition: used, bore capacity in steel (diameter) 23 mm spindle taper MK 2 spindle stroke 130 mm arm length ca. 860 mm table-size 1280 x 500 mm surface area ca. 1250 x 480 mm turning speed range 115 - 2400 U/min workpiece height max. ca. 535 mm boring chuck Schnellspannfutter 1-13 weight of the machine ca. 690 kg total power requirement 1 kW range L-W-H ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm Hsdpfxswugrcs Ab Ast

Condition: used, pressure 35 t throat 220 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 50 mm table surface area 590 x 440 mm ram surface 460 x 160 mm total power requirement 2,2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. B 0,88 x T 1,2 x H 1,95 m Features - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work is performed in-house: - Complete disassembly of the press, cleaning, and technical inspection - Shaft removal, crack inspection, new seals, and V-belts - New paint finish: Light Gray RAL 7035 / Gentian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front cover - New control cabinet with ABB safety control system and touchscreen Operated via touchscreen mounted on the front of the control cabinet, Positioning of the control cabinet (cable length) to be determined in consultation with the end customer, standard 0.8–1.0 m next to the machine, including new cabling for the press - Foot switch - Two-hand control - Current UVV inspection with braking time measurement Hodpfjykb Dqex Ab Aot Following the modernization, the machine is approved for manual loading operations on the open die.

Condition: excellent (used), Assembly frame with rubber support Manufacturer: EDER + MÜLLER Height adjustable: 800 - 950 mm Work surface size: 1800 - 2800 mm diagonal Hedpfjzcqqqox Ab Ast Weight: 60 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany