Used Machining Center With Edge for sale (69,255)

Condition: used, Year of construction: 2007, functionality: fully functional, Z travel: 460 mm X travel: 635 mm Y travel: 510 mm CNC control: Siemens 840D - Powerline Table size (L x W): 790 x 560 mm Taper: SK 40 Tool changer positions: 30 Spindle power: 13 kW Bodpfx Adey Hqd Te Ajwl Spindle torque: 83 Nm Speed range: 10,000 rpm Rapid traverse: 30 m/min Work table: Clamping area: 790 x 560 mm Table load capacity (max.): 600 kg Equipment/Accessories: Chip removal: Chip conveyor Coolant removal: High-pressure through-spindle coolant system with paper belt filter Oil mist extraction: Mechanical separator Setup mode: Electronic handwheel Additional equipment: Air gun Transport dimensions: Machine: 2,800 x 2,000 x 2,700 mm, approx. 4,100 kg Chip conveyor: 3,000 x 1,000 x 1,650 mm, approx. 450 kg Coolant unit: 1,800 x 1,300 x 1,800 mm, approx. 450 kg

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Bwedpfxeyi Dnio Ad Asl Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: new, Year of construction: 2024, X-axis 4,400 mm Bedpsy Ix Upsfx Ad Aowl Y-axis 1,600 mm Z-axis 900 mm Spindle speed 2,000 - 24,000 rpm Drive power 14 kW Tool holder HSK 63 Tool changer 12 positions Control SIEMENS SINUMERIK ONE The machine has never been assembled and is immediately available.

Condition: used, functionality: unexamined, Hurco VMX60T vertical machining centre Bwjdpfsy Duv Usx Ad Asl

Condition: ready for operation (used), Year of construction: 2010, WORK CENTER TO C.N. SCM Make: MORBIDELLI Bodpoqpgglsfx Ad Aewl Model: UNIVERSAL 3612 Year: 2010 - Working range: 3.680 X 1.260 X 150 mm. - 1 Milling motor 8,5 Kw (11,5 HP) - 1 Automatic rotary gearbox with 12 positions - 1 Drilling comb with: 18 vertical + 8 horizontal + 1 "X" saw bits - Vacuum pump 250 m3/h - DXF compatible software - BUMPER protection - CE STANDARDS - Weight 3.000 Kg.

Condition: new, Travel X / Y / Z axes: 1020 / 550 / 635 mm Bwedpoy Inulsfx Ad Ael Table size: 1200 x 550 mm Spindle speed: 12,000 rpm Spindle interface: 40 BBT Control: Fanuc 0i MF Plus Dimensions: 480 x 230 x 255 cm Weight: 8,000 kg Equipment: Tool stations: 30 Coolant through spindle 20 bar Air through spindle (must be ordered with CTS) Chip conveyor Chip container Work area chip flushing

Condition: excellent (used), Year of construction: 2001, Control: Heidenhain TNC 410 Worktable Table size: 2030 x 500 mm Travel distances: X-axis: 1700 mm Y-axis: 600 mm Z-axis: 600 mm Spindle speed range (stepless): 60 – 6000 rpm Rapid traverse: 25 / 25 / 20 m/min Number of tool stations: 22 tools Dimensions: 4.2 x 2.3 x 2.7 m Machine weight: approx. 10,000 kg Bsdpey Imqxefx Ad Aswl

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Bsdpfx Ajw S Dmdod Aswl Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Year of construction: 2020, operating hours: 1,288 h, condition: excellent (used), functionality: fully functional, 4-axis CNC profile machining center For economical and efficient machining of aluminum and thin-walled steel profiles Standard version equipped with air-cooled milling spindle (optionally available with water-cooled milling spindle) All machining operations, such as milling, drilling, and thread tapping, are performed on a stationary clamped profile. Stepless machining between -90° and +90° with any available tool Automatic clamp adjustment with absolute measurement system The traveling tool magazine ensures short tool change times for optimal machining cycles. The magazine can hold up to eight tools. For double profile and end machining, a maximum of two swiveling angle milling heads are available, each with two different tools (0°–90°–180°–270°) (optional) Two separate machining zones for pendulum operation (optional). Area safeguarding is provided by a laser scanner on the operator side for maximum safety and easy machine accessibility. 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system with eluCam Bwjdpfx Adjwxmdte Ael SBZ 140 – 7.6 m Max. machining length with end machining: 7,600 mm Max. machining length without end machining: 7,720 mm

Condition: used, Year of construction: 2016, machine/vehicle number: 0-250-50-2434, functionality: fully functional, year of last overhaul: 2026, Equipment: documentation/manual, We offer this used Weeke BHX 200 optimat vertical woodworking centre, year of manufacture 2016. Bsdpey Iy U Rjfx Ad Aowl Including workpiece return system. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago Bsdpfx Aowwl I Isd Aowl

Condition: used, Year of construction: 2004, frequency 50 Hz weight of the machine ca. 2,510 t 3-axis machining centre Microcut Challenger 2412 Technologies: Drilling / thread machining, form milling (3 D), milling, HSC milling without vice Table Size: 30" x 14.3" Bwodpfx Ajxgv D Asd Ajl Max Table Load: 550 LBS X Axis: 24" Y Axis: 12" Z Axis: 20.47" Spindle Speed: 8,000 RPM Spindle Taper: 40 Spindle Motor: 5.5 HP ATC: 16

Condition: excellent (used), Year of construction: 2006, Heller MCH 280 C 5 axes Year of manufacture: 2006 Control: Siemens 840 D Spindle speed: 8,000 rpm Travels X: 1000 mm Y: 1200 mm Z: 1100 mm Bwedpfx Aey H Hz Ued Ajl Tool magazine capacity: 400 Tool holder: HSK 100

Condition: ready for operation (used), Year of construction: 2002, A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible. Bodpfx Aey H I Eusd Aowl

Condition: ready for operation (used), Year of construction: 1996, Control: Heidenhain MillPlus, NC software: 400.00, connected load: 29kVA, length: 3100mm, width: 2400mm, height: 2450mm, weight: 5.7t. Operating hours: 50,213h, spindle hours: 9,297h. Machine is not functional, the control does not start up, cause is a defective system rack and two defective IOB80 boards. An on-site inspection is possible. Bwedpsy H I Hfofx Ad Ajl

Condition: ready for operation (used), Year of construction: 1998, A CNC vertical machining center Takumi is available. Travel X/Y/Z: 1800mm/850mm/750mm, spindle nose to table distance range: 200mm-950mm, spindle center to column distance: 920mm, table dimensions X/Y: 2000mm/800mm, max. table load: 2200kg, tool holder: NT50, speed: 6000rpm, feed rate: 5m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 5700mm/3850mm/3350mm, weight: approx. 16500kg, control: Heidenhain, operating hours: approx. 50000h, spindle hours: approx. 25000h. Documentation available. An on-site inspection is possible. Bsdpfsy H I H Ejx Ad Aowl

Condition: ready for operation (used), Year of construction: 1991, A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible. Bjdpfoy H I H Sjx Ad Aewl

Condition: good (used), Year of construction: 2008, Ref. -No.: 10626 Manufacturer: DMG Type: DMU 210 P Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain ITCN 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: HSK - 100 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm No. Of Working Stations: 60 coolant reservoir: 40 bar L. Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. - Direct position measuring systems in all axes - Heidenhain TS workpiece measurement Bsdpjy H Er Esfx Ad Ajwl - Electronic handwheel setup mode - Chip conveyor chip disposal - Double gripper tool changer - Motor spindle technology The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC-Steuerung Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Bjdpfjy H Epwex Ad Aewl Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: HSK 63 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 24.000 RPM Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. - 1.1kw engine. Bwodpfx Ajv T Ttfjd Aol - We will help you organize a profitable shipping company or courier.

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. Bwedpfjyga T Nsx Ad Aol The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Bwodpfx Adjw R St Ne Asl

Condition: used, Year of construction: 2004, Machine Type: Vertical Machining Center (VMC) Travels X-axis: 1,270 mm (50") Y-axis: 508 mm (20") Z-axis: 635 mm (25") Table Table size: 1,321 × 495 mm (52" × 19.5") Max table load: 1,587 kg (3,500 lbs) T-slots: 5 slots, 16 mm Spindle Spindle taper: CAT 40 / BT40 Spindle speed: 8,100 rpm (optional 12,000 rpm) Spindle motor: 30 hp (22.4 kW) vector drive Drive type: Inline direct-drive Coolant Through Spindle (TSC): 300 psi (21 bar) standard for TSC version Tool Changer Automatic Tool Changer: 40 tools (side-mount ATC) Tool change time: ~2.8 sec (tool-to-tool) Max tool weight: 5.4 kg (12 lbs) Feedrates Rapid traverse: 25.4 m/min (1,000 ipm) Cutting feed: up to 16.5 m/min (650 ipm) Accuracy Positioning accuracy: ±0.005 mm Repeatability: ±0.0025 mm Control Control system: Haas CNC Control Bwedpfx Adeyfmtto Asl Memory: 1 GB Networking: Ethernet / USB Dimensions & Weight Machine weight: approx. 7,100 kg Footprint: approx. 4.1 × 2.8 m Height: approx. 3.1 m Electrical Power requirement: 208–240 / 360–480 V, 3-phase Air requirement: 6.9 bar (100 psi)

Condition: excellent (used), For sale: robust WEMAS column milling machine, model FM23. Heavy cast iron construction, very rigid—ideal for toolrooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant system with separate reservoir and pump. Vertical spindle with a precision holder and feed adjustment. Power supply: 3×400 V. The machine is complete, recently serviced, runs smoothly, and is ready for power-on testing. Normal signs of use visible—no excessive play. Included in the price: 3-axis DRO display, scales on X/Y/Z axes, coolant tank and pump, cables, power feed roller, and work light. Bodpfx Asw I Hzpsd Aewl Additional information from photos: 'WEMAS' and 'FM23' nameplates, spindle adjustment calibration plate, DRO panel with mm/inch, ABS/INC, and calculator functions. Working parameters, spindle taper, and speed ranges to be confirmed onsite—I can measure the table and X/Y/Z travels upon request. Loading by forklift possible. Assistance with transport organization available.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Equipment: chip conveyor, Options: Chip conveyor 48-tool magazine High-pressure coolant Overload detector Detachable handwheel Mist collector 5-axis machining package SMOOTHX 6 additional M-codes Performance package Engraving function 8 MB memory extension Bjdpsywttrefx Ad Ajwl