Used Mahlsteinmühle Schrotmühle Mahlstein 400 V for sale (44,822)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,500 kg, maximum load weight: 15,500 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space width: 2,520 mm, loading space height: 890 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further Information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 support wedges with holder Aluminum side impact protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Extendable widening elements to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down points for low-loader 1 pair of tie-down points on the gooseneck, each 5 tons 9 pairs of tie-down eyes embedded at the top and sides in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of tie-down holes in the outer frame of the low bed, each with 5 tons. (for securing lashing straps) Coupling device for trailer turntable Drawbar with tested 50 mm drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical incl. Axle load equalization at the front and rear (lever equalization) Wheels and tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED warning light with holder, switched via side lights (light can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm 2 x 7-pin fail-safe plugs at the front, with connecting cable Floor Gooseneck at the front with steel/diamond plate thereafter with 70 mm softwood floor, in the wheel arch area steel/diamond plate Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable covered with wood Hydraulically operated via tractor's auxiliary drive with throttle, operation on the left side Hydraulic connection with quick-release coupling NW 10/3, incl. connecting hose Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while observing the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline included prepared for license plate holder, two-line Lredsi Ri Izopfx Agrst Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Novagrau 10-year warranty against rusting Drawbar galva

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Lsdpfei Ri I Nsx Agrjrt Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space height: 900 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Low-bed semi-trailer chassis Steel welded construction Turntable with heavy-duty ball bearing ring Folding rear outriggers 2 support wedges with holder Aluminum side impact protection Rear splash guards covering the entire width Semi-fender for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approximately 1800 mm long, approximately 650 mm wide and approximately 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess, laterally on the longitudinal frame, approximately 300 mm from the front and approximately 200 mm in front of the rear slope 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included) 1 storage box recessed in the gooseneck at the bottom with lid, W=720 mm/ L=520 mm / D= 170 mm Extendable widening elements to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Storage compartment for wooden planks under the loading platform Lashing eyes for low-bed trailer (40 lashing options) 1 pair of lashing eyes on the gooseneck, each 5 tons 9 pairs of lashing eyes embedded above and on the side in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing eyes in the outer frame from the low bed, each 5 tons (for attaching tie-down straps) 3 pairs of folding lashing eyes additionally, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (protruding) 1 x behind the last axle, recessed in the floor Coupling device for the trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined by 8° / D-value min. 160 kN Axles + Suspension Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker equalization) Wheels and Tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning signs double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel / checkered plate covering followed by 70 mm softwood floor, wheel arch area with steel / checkered plate covering Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left-hand side at the front Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Country of Registration / Signs Country of Registration: Germany 24/7 Service Hotline Ljdoi Ri Daopfx Agrsrt prepared for two-line license plate holder Contour marking with reflective strips ac

Condition: used, Year of construction: 1986, Colour: Green Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T Lrodewng S Aepfx Agrot 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Main motor power [kW]: 7.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Max. workpiece height [mm]: 120 - Total stroke [mm]: 150 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 10 - Cylinder diameter [mm]: 130 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Bosch BA 400 Euro Module PCD 52 DP DC-DC Converter, used, 100% functional. Ledji D T Tpepfx Agrjrt

Condition: ready for operation (used), Schneider Electric ELAU PacDrive MC-4/11/22/400 SN: 2228230262 – the metal housing is slightly deformed in one area and one mounting point of the fan is damaged, see photo; used, in good condition, 100% functional, delivery as per photos. Lrodpfjx Euckox Agrot

Condition: ready for operation (used), Bosch PSU 5100.111W / 1070079215 frequency converter SN: 002809034 - U AC 400 - 480V / 110A, used, good condition, 100% functional, scope of delivery as per photos Lsdpferlx Dzjx Agrjrt

Condition: ready for operation (used), Schneider Electric ELAU PacDrive MC-4/11/22/400 SN: 2228230252, used, in good condition, 100% functional, delivery as per photos. Ledpfx Aex Eucdjgrert

Condition: ready for operation (used), Bosch PSU 5100.111W / 1070079215 frequency converter SN: 002809025 - U AC 400 - 480V / 110A, used, in good condition, 100% functional, delivery scope as per photos. Ljdpfx Agex Eqx Isrjrt

Condition: ready for operation (used), Bosch PSU 5100.111W / 1070079215 frequency inverter SN: 002881730 – U AC 400 – 480V / 110A, used, in good condition, 100% functional, delivery as per photos. Ledpfjx Eqx Uex Agrert

Condition: new, ELIN EBG PX 400 / 4.0C Elvovert frequency inverter, serial number as shown in the photo, unused in original packaging, 100% functional. Lrodpfxei D Urqe Agrst

Condition: ready for operation (used), Heidenhain / zentro-elektrik VSNT 400 / 8610-1 Power Supply SN:100647, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Ljdex Err Njpfx Agrort

Condition: ready for operation (used), Bosch PSU 5100.111W / 1070079215 frequency converter SN: 002990889 - U AC 400 - 480V / 110A, used, good condition, 100% functional, scope of delivery as per photos Lredpfjrlx D Esx Agrot

Condition: ready for operation (used), Elau MC-4 / 11 / 03 / 400 PacDrive MC-4 SN:897473.0060, the plastic front is slightly damaged see photo, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos Lredpfsp Hrzpsx Agrot

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, saw blade diameter: 400 mm, cutting height (max.): 145 mm, cutting range round steel at 45°: 120 mm, type of input current: AC, Robust cold circular saw with pneumatic workpiece clamping Lrsdpfx Agsy Httdjrot Clamping, sawing, return to initial position, opening in automatic mode Stepless feed rate adjustment Minimum quantity lubrication system + coolant unit Saw blade diameter from 375 to 425 mm Mitre adjustment 45° - 90° - -45° - -30° Cutting capacity with saw blade diameter 400 mm: Flat: 210 x 120 mm Mitre cut: 145 x 120 mm Round: 140 mm diameter Mitre cut: 120 mm Pole-changing three-phase motor for saw blade – circumferential speed 22 + 44 m/min Voltage: 400 V

Condition: used, empty load weight: 10,680 kg, maximum load weight: 29,320 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2011, next inspection (TÜV): 12/2026, loading space length: 10,500 mm, loading space width: 2,510 mm, loading space height: 970 mm, suspension: air, tire size: 245/70R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, turntable, air suspension, ABS (anti-lock braking system), extendable to 3m, lashing rings, hydraulic ramps, rear support, twin tires, wheel recesses. Body: 4-axle low-loader trailer with hydraulic loading ramps, 4x 10t Gigant axles, drum brakes! Ramp length approx. 2850 mm! Loading height approx. 970 mm! Lsdpexx A H Iefx Agrjrt Wheel recess height at the front approx. 600 mm, at the rear approx. 670 mm! The trailer has received a new kingpin! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! - .

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, MORI SEIKI SV-400 WITH 4TH AND 5TH AXIS Lrjdpfxotvau Ho Agrst VERTICAL MACHINING CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SV-400 YEAR 2000 CONTROL MORI FANUC MSC 501 TABLE SIZE 900.0 x 500.0 mm TRAVERSES (XYZ) X: 600.0 mm Y: 430.0 mm Z: 460.0 mm SPINDLE SPEED Up to 12,000 rpm SPINDLE TAPER BT 40 ATC 30 STATIONS RAPID TRAVERSE XYZ: 32,000 mm/min FEEDRATE 1-16000mm/min PLUS NIKKEN 4th and 5th AXIS UNIT RENISHAW PROBBING TWIN SWARF CONVEYOR COOLANT SYSTEM

Condition: excellent (used), Year of construction: 2017, 407 USED Treif Bread Slicer. TECHNICAL DATA: - 380V power supply. EXTERNAL DIMENSIONS (in cm): - height 112 cm - width 90 cm - length 80 cm. Lrodpfx Aozf N A Negrjt

Condition: excellent (used), Year of construction: 1999, 1 used, very good condition water-cooled multi-function system with MIG/MAG pulse and standard welding, MIG brazing, stick electrode welding … Manufacturer: DALEX, Made in Germany Model: VARIO MIG 400 L(W)/DV 36 L(W) Year of manufacture: 1999 This multi-function system is characterized by the following welding technologies: • Easy operation • Multi-function display • Various welding processes can be selected: o MIG/MAG o Pulse o ALU o MIG brazing o Stick electrode welding • Reduction of operating costs by 30% Technical data: Welding current range, stepless 10 - 400 A Duty cycle 100% 315 A / 30 V Duty cycle 60% 400 A / 34 V Ljdeyrgu Rjpfx Agrsrt Primary voltage: 3 x 400 V Dimensions L x W x H approx. 1030 x 480 x 1300 mm Total weight approx. 125 kg Accessories / Special features: • Water cooling • Separate wire feeder DALEX DV-36 L(W) with 4-roller wire feed • Hose length 3 m • Pressure reducer • Ground cable • Chassis • Cylinder holder • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, loading space length: 7,145 mm, loading space width: 2,750 mm, loading space height: 900 mm, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos! Lsdpfx Agjyxq A Horsrt

Condition: used, Manufacturer: Multivac Type: Vacuum machine Model: C 400 Chamber depth: 470 mm Ledpjt Up Rrefx Agrort Chamber height: 170 mm or 250 mm Sealbar configurations: front 650 mm + right 450 mm left 520 mm + right 520 mm left 520 mm + right 520 mm + front 520 mm front 700 mm Voltage: 3 x 400 V 50 Hz Incorporated vacuum pump: 100 or 140 m3/h Main material: Stainlees Steel Machine weight: 250 kg

Condition: new, Year of construction: 2025, power: 400 kW (543.85 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 12.000 kg Functional Generator capacity: 400 kVA Dimensions of cargo space: 465 x 230 x 250 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Tank Lredpfxjw A Ha Ns Agrjt

Condition: new, Year of construction: 2025, machine/vehicle number: 20250205012, Field of application: Construction Empty weight: 944 kg Generator capacity: 400 kVA Lsdpfx Aowqkm Aegrjrt Dimensions of cargo space: 124 x 64 x 85 cm CE mark: yes Frequency: 50 Voltage: 400 Production country: CN Please contact Team DPX for more information

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, total height: 2,770 mm, table load: 500 kg, overall weight: 5,200 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details. • Table: 900 × 500 mm; 4 T-slots (18 mm width × 100 mm pitch) • Number of axes: 4 (X, Y, Z + 4th rotary axis; 4th axis supplied by accessory listed below) • Distance spindle nose to table: 150–610 mm • Spindle: max; 22 / 18.5 kW motor; 85 mm front bearing ID • Tool magazine: max tool Ø 80 mm (adjacent) / 125 mm (non-adjacent); max tool length 300 mm; chip-to-chip 3.2 s • Feedrates: Rapid X/Y/Z 32,000 mm/min; max working feed 16,000 mm/min • Axis motor power: X/Y 2.1 kW; Z 4.4 kW • CNC control: MORI-FANUC MSC-501 (compatible with MSC-518); memory 320 m; functions include helical interpolation and cutting force control (Power Monitor) • Coolant system: 50 bar high-pressure through-spindle coolant (TSC) • Features: air blow for part cleaning, full enclosure, end-of-cycle lamp, RS-232 interface • Floor space: 2,200 × 2,550 mm • Electrical: total installed power 50.2 kVA; 380 V, 50 Hz Additional equipment • 4th axis attachment: Tsudakoma RN-150R rotary table with 200 mm faceplate and tailstock • Chip management: 2× rear-discharge chip conveyors Technical Specification Lrsdpfx Agjy Uxigorjt Taper Size BT 40

Condition: used, Very handy and ergonomic, easy to use stroboscope with high lighting intensity (up to approx. 50 cm distance) and low energy consumption. Design with plug-in exchangeable battery pack. High frequency stability and easy adjustment with frequency doubler and splitter. Phase shift + / - 6° for observing different positions. Sensor input for external trigger. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFNL016 Lrjdpfxjxzh Ups Agret Listing name: ALLURIS SMS 400 StroboVision Stroboscope