Used Mahros Gp Dc\A for sale (69,742)

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) Iaodpfertvi Rjx Ab Nst WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: new, maximum load weight: 29,429 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, Schmitz Cargobull SCS 24/L - 13.62 -long-term rental- * XL certificate * Beverage certificate * DC 9.5 certificate * Pallet stop bar on both sides * Sliding roof * 4 rows of aluminum slats * Lift axle * Branded tires (Hankook or similar) * Tool box * 4 loading rails + 2 load securing bars * Front release device * Crossover plate on the last floor plate * Swedish lights Long-term rental + hire purchase possible (subject to credit check) Subject to errors and prior sale! Location: Traxxo GmbH, Auf dem Wörth 2-4, 67240 Bobenheim-Roxheim Subject to prior sale and errors are expressly reserved! Sale exclusively in accordance with our terms and conditions Iaedpovv I Ebofx Ab Not Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: used, maximum load weight: 29,429 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, Schmitz Cargobull SCS 24/L - 13.62 -long-term rental- * XL certificate * Beverage certificate Iodpfjvv I Ehjx Ab Neat * DC 9.5 certificate * Pallet stop bar on both sides * Sliding roof * 4 rows of aluminum slats * Lift axle * Branded tires (Hankook or similar) * Tool box * 4 loading rails + 2 load securing bars * Front tensioning device * Tarpaulin rope * Crossover plate on the last floor plate * Swedish lights Long-term rental + hire purchase possible (subject to credit check) Subject to errors and prior sale! Location: Traxxo GmbH, Auf dem Wörth 2-4, 67240 Bobenheim-Roxheim

Year of construction: 2011, condition: good (used), machine/vehicle number: PU000567, Thermal CTP: Computer to Plate Iedpjfh Dmqjfx Ab Neat Recording System: External Drum Dual Casette Loader DCL 106: Two Plates With Fully Automatic loading PST 480 B Plate Stacker Technical Details: Throughput option (plates/h in max. format) : 12 Plates / Hour Min. Plate Format : 370 x 323 mm Maks. Plate Format : 930 x 1060 mm Plate Thickness : 0,15 - 0,3 mm Technical data can vary according to job, consumables and possible other factors

Condition: new, functionality: fully functional, As a machine dealer in Offenburg, we offer premium welding machines from Rehm. Many machines are immediately available from stock. We are also happy to advise you with regard to individual wishes and requirements. Give us a call. Technical data Model: 280 AC/DC Setting range TIG [A]: 3-280 Electrode (BOOSTER) [A]: 3-280 Duty cycle (ED) at Imax. (10 min.) TIG [%]: 100 Electrode (booster) [%]: 60 Welding current at 100 % duty cycle at 40°C TIG [A]: 280 Electrode (booster) [A]: 260 Fuse protection (slow) [A]: 16 Torch cooling: Water Protection class: IP 23 Power factor [cos phi]: 0.96 Iodpfx Abjw Eil Te Noat Power consumption at Imax. [kVA]: 11.9 Mains voltage [V]: 3 x 400 Mains frequency [HZ]: 50 Control socket [pol.]: 12 Welding cable socket [mm]: 13 Weight [kg]: 27 Dimension [mm]: 520 x 360 x 460 Possible accessories: Hand burner earth cable Pressure reducer Available immediately. For collection by the customer. Forklift available. Shipping is also possible.

Condition: used, functionality: fully functional, Year of construction: 1976, machine/vehicle number: ROD109, 1 Demag KBK I wall-mounted slewing crane, 500 kg load capacity / lifting capacity Jib length 2 m, 500 kg load capacity with Demag DC chain hoist, load capacity 500 kg (year of manufacture 2007) Weight incl. wall bracket approx. 150 kg Complete with chain hoist, cable trolley, travel carriage, and small parts Slewing range 270° Iaodpfxsxmuuyo Ab Not Item location: 75053 Gondelsheim The system is fully dismantled and immediately available Shipping by freight carrier or collection Please enquire about shipping costs according to postal code

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: ROD39, 1 Demag KBK I wall-mounted slewing crane, 400 kg payload / lifting capacity Jib length 2 m, 400 kg payload Iasdpoxmuumefx Ab Net Equipped with Demag DC chain hoist, 400 kg capacity Weight including wall bracket approx. 200 kg Complete with chain hoist, cable carrier, trolley, and small parts Slewing range 270° Item location: 75053 Gondelsheim System is fully disassembled and immediately available Shipping by freight forwarder or collection Please enquire for shipping costs by postal code

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: NOHxx+, 1 Vetter / Demag Wall-Mounted Slewing Crane 500 KG Load Capacity Type PW5-5.0 Outreach approx. 5m, 500KG (0.5t) payload with Demag chain hoist, 500KG capacity (2 lifting speeds) 10 cranes available!!! Total weight approx. 350 kg Year of manufacture 2004, with inspection book Complete with wall brackets, jib, chain hoist, cable trolley, carriage, and small parts Slewing range approx. 180° Item location: 75053 Gondelsheim Iasdjxmfayspfx Ab Net System is completely dismantled and immediately available See pictures Shipping via freight forwarder or pickup Please inquire about shipping costs by postal code

Condition: new, Year of construction: 2025, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, 1 multispindle TORNOS SAS16-DC in rebuilding Iedpfxsugl S Io Ab Neat - new electrical cabinet SIEMENS or FANUC, to choose – pick-up with brake – adjustable stop with counter operation – 3 independent feeding system – several tool-holders and drillings – drum bar with support – Options :automatic bar loader IEMCA PRA, numerical tapping, CNC cross slides, etc... Contact us.

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 16 [mm] - maxi feed length : 60 [mm] - number of spindles : 6 - number of transversal slides : 6 - number of spindle speeds : 16 Iajdpfx Absuhaugs Njt - spindle speed : 1200-8000 [rpm] - maxi production : 80 [parts/min] - number of independent available feeds : 4 - independent feeds normal stroke : 45 [mm] - sizes : 5000 x 900 [mm] - weight : 3000 [kg] EQUIPMENT - sub-spindle with brake - counter operation device - all turning tool-holders - bar feeder Pietro Cucchi AN-BN - coolant tank : * with pump

Condition: good (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 400 V, ground cable length: 5,000 mm, type of cooling: water, TIG welding unit, water-cooled, DC/AC power source CITOTIG 350W AC/DC Welding current range 3...350A DC / 10...350A AC with 5m power cable with plug for mains connection 3 x 400V - Gas hose 1.5m - Ground cable with fixed clamp 5m, 50mm2 - Transport trolley TY2A Iedpex A S Txefx Ab Nsat - Coolant FREEZECOOL 10l - TIG torch CITORCH T 35W EB C5B, 5m water-cooled - TIG torch CITORCH T 10W EB C5B, 5m water-cooled - Argon / CO2 pressure regulator

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm Ijdpsnzhxqjfx Ab Noat 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Separate electric and command panel Iaodpfx Abjc Ux Tlj Not 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 5500

Year of construction: 2018, operating hours: 1 h, condition: as good as new (ex-display), DONALDSON dryer Buran DC 045 AB with electronic control with electronic level-controlled steam trap Technical specifications: Model: BURAN DC0450AB Medium: compressed air, free from aggressive components Flow rate: 7.50 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 2 " Electric power supply: 230 V / 50 Hz / 1 phase Frequency: 50 Hz Ijdpfx Ajdzb Hrsb Nsat Dimensions, weight Height: 1,055 mm Width: 645 mm Length: 920 mm Weight: 116 kg

Year of construction: 2018, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: 1CY1119D00007, DONALDSON dryer Buran DC 0225 AB with electronic control with electronic level-controlled steam trap Technical specifications: Model: BURAN DC0225AB Iajdpjdy Drbjfx Ab Nst Medium: compressed air, free from aggressive components Flow rate: 3,75 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 1 1/4" Electric power supply: 230 V / 50 Hz / 1 phase Frequency: 50 Hz Dimensions, weight Height: 870 mm Width: 480 mm Length: 660 mm Weight: 68 kg

Condition: new, functionality: fully functional, FESTO DGPL-32-700-PPV-A-KF-B; 161793 Linear actuator. Iajdpoturw Nsfx Ab Not Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, FESTO DGPL-32-2180-PPV-A-B-KF-SH LINEAR ACTUATOR Pressure: 2…8 bar. Good working condition. Please check out our other listings as well. Ijdpfxetwqtbs Ab Nsat

Condition: used, functionality: fully functional, FESTO DGPL-40-1250-PPV-A-B-KF-GH-SH Linear actuator. Isdpfetwqrwex Ab Njat Good working condition. Please check out our other listings as well.

Condition: new, mileage: 500 km, power: 153 kW (208.02 HP), fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,300 mm, loading space height: 500 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, DAF LF210 4x2 7.5t MEILLER three-way tipper----Nutzfahrzeuge Göppl GmbH - DAF authorized dealer ----STOCK VEHICLE - AVAILABLE IMMEDIATELY! Production: 2023 Empty weight: 4,690 Gross weight: 7,490kg Payload: 2,800kg Guarantee: Plus - drive train - 3 years - 200,000km Financing + maintenance contract: We would be happy to arrange an attractive offer for you. Creditworthiness required. Equipment: Tipper package * Day Cab cabin - local transport * Rubber cabin suspension * Sun visor outside "green translucent" * Halogen headlights Iedpjpd Ttrefx Ab Neat * Daytime running lights * Curb window passenger door * Green tinted windows * Driver's seat with air suspension * Passenger double seat * Air conditioning * Radio/CD player * DAF Connect * Antennas: AM/FM+GSM+GPS * Adaptive cruise control with FCW and AEBS * Reverse alarm system * Engine PX-5, 153kW/208 HP, EURO6 E * Automatic idle shutdown: 5 minutes * 6-speed manual transmission * Rear axle ratio 3.73 * Mechanical differential lock * Suspension: * -Front: 3.60t parabola * -Rear: 5.0t parabola * Wheelbase: 3.15m * Tires: 215/70R17.5 KMAX GoodYear * Plastic fuel tank: 110 liters * AdBlue tank: 30 liters * Heated water separator * Pneumatic and electrical connections for trailer * Jaw coupling * Trailer hitch * Gearbox auxiliary drive N/4c-U-32/25, PTO * Generator 80A, batteries 2x 125Ah MEILLER * Three-way tipper * Dimensions approx: 4200 x 2400 x 500mm * Side walls can be folded down * Extension/protective grille can be plugged in * 1x wheel chock * Shovel and broom holder on the front wall extension Optional: * OBU installation * Speedometer test * DUOMATIC connections * Voltage converter ----Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg DAF authorized dealer - DAF service partner - FIAT-Professional Service Partner Subject to errors and prior sale Sale to commercial customers only.

Condition: new, mileage: 300 km, power: 167 kW (227.06 HP), fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, loading space length: 7,300 mm, loading space width: 2,460 mm, loading space height: 2,500 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, DAF LF 230 with box body and tail lift 12t ---- Nutzfahrzeuge Göppl GmbH - Authorized DAF Dealer ---- STOCK VEHICLE - AVAILABLE IMMEDIATELY! ---- Production: Chassis 2023 - Body: 2025 Warranty: Plus - Driveline - 3 years - 200,000 km Financing + Maintenance Contract: We are happy to arrange an attractive offer for you, subject to credit approval. Equipment: * Distribution cab * Rubber cab suspension * External sun visor, “green light-permeable” * Halogen headlights * Fog lamps * Green-tinted, heated windows * Adjustable roof spoiler in cab color * Pneumatic steering column lock * Driver’s seat: air-suspended luxury seat * Double passenger bench * Air conditioning * Radio/CD player DAB, 2 speakers * DAF Connect * Adaptive cruise control with FCW and AEBS * Lane departure warning system * PX 7 engine, 167 kW / 227 hp, Euro 6 * Automatic engine idle shutoff: 5 minutes * 8-speed manual gearbox * Rear axle ratio 3.73 * Mechanical differential lock * Suspension: - Front: 4.50t parabolic springs - Rear: 8.5t air suspension * Wheelbase: 5.00 m * Tyres: 245/70R17.5 KMAX Goodyear * Plastic fuel tank 155 liters * AdBlue tank: 30 liters * Pneumatic and electrical connections for trailer, turntable coupling * Trailer electrical connection + EBS 24V / 2x 7-pin * Body connector for tail lift * Generator 100A, batteries 2x 175Ah Body by GÖPPL Fahrzeugbau GmbH Furniture box body * Dimensions (internal): Iaodpfx Ajwx Tynob Nst - Length: approx. 7,300 mm - Width: approx. 2,460 mm - Height: approx. 2,500 mm * Side door, rear right * 2-step ladder * GRP roof, translucent * Needle felt lining * Triple-row combination anchor rails, also in side door * Height from floor to center of rail: 600 / 1150 / 1800 mm * LED light strip left and right upper * 24 mm phenolic-coated floor * Skirting/scuff strips on side and front walls, bottom galvanized steel, 270 mm high * Underrun protection galvanized * Palfinger MBB C 1500 kg tail lift, with hand and foot controls * 2x stainless steel toolboxes * Load securing certificate Code XL ----Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg Authorized DAF Dealer - DAF Service Partner - FIAT-Professional Service Partner Errors and interim sale reserved Sale to business customers only.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,000 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,230 mm, total width: 1,600 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,200 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 2,000 mm, table width: 1,000 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,000 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,000 mm, height adjustment type: mechanical, input current: 39 A, number of spindles: 9, pass-through width: 1,000 mm, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are pleased to offer our premium deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable company with extensive experience in the production of metalworking and woodworking machinery. With decades of expertise and innovation, Madora is recognized for delivering robust, efficient, and operator-friendly solutions tailored to the needs of industrial clients throughout Europe. Our machines are engineered for precision, performance, and long-term reliability – all at competitive prices. The GP 1000 2Z is an outstanding, versatile deburring machine designed for cleaning sheet metal after various cutting processes. This model is fitted with two ‘Z’-type oscillating and rotating heads. What does this mean in practice? It allows for two operations to be performed simultaneously: not only does it efficiently remove scale after plasma cutting, but it also deburrs and rounds off the edges of workpieces following laser cutting. The broad range of working thicknesses and widths of up to 1,000 mm make it possible to process both small and large components. Iedswztn Djpfx Ab Njat With suitable tooling, the machine is also capable of heavy edge rounding and oxide removal. The GP 1000 2Z deburring machine features a TFT touch-screen control panel, enabling the operator to continuously and precisely manage machining parameters such as workpiece height, feed rate, and tool rotation speed.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,000 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,230 mm, total width: 1,600 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 3,580 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 3,470 mm, table width: 1,000 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,000 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,000 mm, height adjustment type: mechanical, input current: 71 A, number of spindles: 9, pass-through width: 1,000 mm, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are pleased to present our high-quality deburring machines, produced in Poland by Madora Sp. z o.o., a reputable and experienced manufacturer specializing in metalworking and woodworking machinery. With decades of expertise and innovation, Madora is renowned for delivering durable, efficient, and user-friendly solutions tailored to the needs of industrial customers throughout Europe. Our machines are engineered for precision, performance, and long-term reliability – all at competitive prices. The GP1000-4Z is a versatile deburring machine designed for post-cutting cleaning of sheet metal. Equipped with four "Z" type processing units, it offers outstanding versatility and processing capacity. What does this mean in practice? It allows for up to four operations simultaneously: not only does it remove scale following plasma cutting, but it also deburrs and rounds off workpiece edges after laser cutting – all in a single pass. The extensive processing range, including sheet thicknesses and widths up to 1,000 mm, makes it suitable for both small and large workpieces. With the appropriate tooling, the machine is also ideal for heavy edge rounding and oxide removal. The GP1000-4Z deburring machine features a TFT touch-screen panel, providing the operator with complete and continuous control over parameters such as workpiece thickness, feed speed, and tool rotation speed. Each unit can be operated independently, enabling the operator to select which processing steps to perform in a single pass. Ijdowzttgspfx Ab Noat

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 600 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 1,500 mm, total width: 1,100 mm, total height: 1,700 mm, workpiece weight (max.): 500 kg, overall weight: 680 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 1,300 mm, table width: 600 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 600 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 600 mm, height adjustment type: mechanical, input current: 20 A, pass-through width: 600 mm, Equipment: CE marking, documentation/manual, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a trusted and experienced company specializing in metal and woodworking machinery. With decades of expertise and innovation, Madora is known for delivering durable, efficient, and user-friendly solutions tailored to the needs of industrial clients across Europe. Our machines are designed for precision, performance, and long-term reliability—all at competitive prices. The smallest model in the MADORA range, the GP 600 2Z, is a versatile deburring machine for cleaning sheet metal after various cutting processes. Equipped with two "Z"-type machining units, it offers outstanding flexibility and high machining capacity. The machine can perform two operations simultaneously: not only can it remove scale after plasma cutting, but it is also able to deburr or round the edges of workpieces after laser cutting—all in a single pass. Its machining width of up to 600 mm allows for the efficient processing of small and medium-sized components. With suitable tooling, the GP 600 2Z handles heavy edge rounding and oxide removal as well. Iaedpjwzu A Nefx Ab Nst The GP 600 2Z deburring machine features an electronic numeric control panel, which allows the operator precise and continuous adjustment of machining parameters such as workpiece height, feed rate, and tool rotation speed. Each machining unit can be controlled independently, giving the operator full flexibility to select the required process steps within a single pass.

Condition: like new (used), Exceptional machine for professional TIG welders WELDKAR The TIG 320 AC/DC Pulse features a 320 Amp power source (60% duty cycle) at 400 Volts. Under continuous operation, the maximum welding current is 250 Amps. This TIG welder is perfectly suited for (medium to) heavy industrial work and series production. Iaodpfx Abjxf Nvpj Not - WK TIG 320 AC/DC Pulse power source with EMC - WK MIG 5040F / WK TIG 320 AC/DC water cooler – 5 liters - Chassis for WK TIG 320 AC/DC Pulse - Tig welding torch WK 18 – 4 meters, water-cooled - Inline water unit WK MIG 5040F / WK TIG 320 AC/DC - Wireless remote control for WK TIG 320 AC/DC Pulse - Foot pedal for WK TIG 320 AC/DC Pulse - Welding cable set 300A WKP 35-70, 35mm² - Ground cable set 300A WKP 35-70, 35mm² NET PRICE: 10,500 GROSS PRICE: 12,915

Condition: excellent (used), Year of construction: 2014, Drilling line consisting of: 1. MAHROS - BRUSH CF loading system 2. MORBIDELLI - ZENITH F2 CDM through-feed drill 3. MORBIDELLI - ZENITH F2 CDM through-feed drill 4. MAHROS - BRUSH SF unloading system Machine connected - works daily in one shift. The first drill has: upper vertical heads - 3 pcs Iaedpfx Abogb D Afs Net lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs The second drill has: upper vertical heads - 3 pcs lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs rear horizontal heads - 6 pcs Below are details of the machine and a video The possibility of seeing the machine every day. Line availability August 2021