Used Matrix Industrial Furniture for sale (29,252)

Condition: used, Year of construction: 2003, functionality: unexamined, Serial No.: 14-26298 Recorded operating hours: 59,762 h Cedpfszvyqfsx Adrjrh Robot teach pendant

Condition: used, Year of construction: 1994, functionality: unexamined, Serial No.: 30194.117.0 Roll bar including wiring harness including robot hand-held control unit Csdezvyq Sspfx Adrsrh including control software and logbook

Condition: good (used), Year of construction: 2015, operating hours: 3,556 h, functionality: fully functional, machine/vehicle number: 642934, overall weight: 1,145 kg, load capacity: 240 kg, arm reach: 2,896 mm, This is a KUKA KR 240 R2900 ultra industrial robot with KRC4 control system, manufactured in 2015. It is supplied with a Z.TT.2Axes_500 two-axis rotary table. We would also be happy to offer you this robot as a fully refurbished unit! Cedpjzw A Sbsfx Adrerh The control system includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: used, Year of construction: 2008, functionality: unexamined, cooling capacity: 8 kW (10.88 HP), type of input current: three-phase, type of cooling: water, input voltage: 400 V, power: 5 kW (6.80 HP), input frequency: 50 Hz, Equipment: compressor, cooling unit, For sale: INTECO industrial chiller, model RM30, manufactured in 2008 (serial number 13423), installed and serviced by FRIAZ – Frio Industrial de Azeméis, Lda. Water cooling unit with a cooling capacity of 8 kW, electrical power of 5 kW, and three-phase power supply (3 x 400V / 380V, 50 Hz). Crsdezvdgkspfx Adrjh Operates with R407C refrigerant (8 kg charge) and includes a dedicated RM30 control panel with indicators for start/stop and alarms (HP, SA, TAH, RT, RR). Structure made of painted sheet metal (white/blue), with compressor and heat exchanger visible through a panel with a protective grille. Condition: it was in normal operation until approximately 2 months ago, when it was taken out of service. It has not been tested since then. It shows normal signs of wear and tear for its age and installation period.

Condition: refurbished (used), functionality: fully functional, load capacity: 15 kg, inspected and tested Crsdpfx Aozvd Tqedrsh

Condition: refurbished (used), functionality: fully functional, load capacity: 16 kg, inspected and tested Cedpfxjzvd Uzo Adrerh

Condition: refurbished (used), functionality: fully functional, inspected and tested Crjdpfozvfarox Adrjh

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, overall weight: 10 kg, load capacity: 10 kg, arm reach: 1,420 mm, controller manufacturer: KRC$, inspected and tested Cjdpfx Aezvfbvodrerh

Condition: excellent (used), Year of construction: 2017, GWA tested and certified. Credozvfd Depfx Adreh

Condition: excellent (used), functionality: fully functional, Fully functional Cedozvfimopfx Adrerh

Condition: good (used), Year of construction: 1997, Rust size: 700 x 650 x 1.100 mm (W x H x L) batch weight: 350 kg Codpezvfkwefx Adrsrh heating: electrical, 70 kW temperature: max. 80°C

Condition: excellent (used), functionality: fully functional, ABB Robotics IRB 6600 Robot 1 x ABB Robotics IRB6600 robot, serial number 66-68813 1 x ABB Robotics IRB6600 robot, serial number 66-68814 Crjdpfx Aezm E Rrodrjh 1 x ABB Robotics IRB6600 robot, serial number 66-68815 1 x ABB Robotics IRB6600 robot, serial number 66-68816 The IRB 6600 is a powerful 6-axis industrial robot for demanding applications that require flexibility, reach, and reliability. It is available in various configurations and supports payloads from 125 kg to 225 kg with arm lengths of up to 3.2 m. This makes it versatile for use in production environments. Its rear-inclined geometry enables improved accessibility and space-saving integration, especially in machine tending, spot welding, and material handling. The robot features advanced safety technologies such as collision detection, active braking, and path stabilization through the ABB TrueMove and QuickMove systems. Integrated monitoring tools support predictive maintenance, while the robust, IP67-certified design and reinforced structure make it suitable for harsh industrial environments. Note: The IRB 6600 model is no longer manufactured. Service and spare parts are still available for existing installations. -Payloads from 125 kg to 225 kg, reaches from 2.55 m to 3.20 m. -Rear-inclined design for better access and compact integration. -Equipped with active/passive safety: collision detection, path guidance, dual-channel stop. -Integrated load/motion monitoring for preventative maintenance. -0.1 mm repeatability and full IP67 protection for harsh environments. Maximum payload (kg): 225 Maximum reach (m): 3.2 Applications Spot welding, machine tending, material handling Mounting: Floor Environment: Foundry, standard industry Used item – normal signs of wear and tear. Further details, article numbers, and images available upon request. "Sample photos. The actual product may vary." Two-week commissioning guarantee. No further warranty. Spare parts are constantly available in stock. The robot is fully functional and can be inspected upon request. Free loading / ex works. The stated amount is net and applies per robot. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or forwarding costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs abroad on request – please specify country, city, and postal code. Forwarding costs on request – please specify delivery address.

Condition: excellent (used), a complete robotic cell. Cedpfx Adeznla Nererh

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm. Crjdpfx Adezt R E Ujrjh

Condition: refurbished (used), Year of construction: 2016, operating hours: 20,169 h, functionality: fully functional, machine/vehicle number: 512822, overall weight: 51 kg, load capacity: 6 kg, arm reach: 706 mm, This is a KUKA KR 6 R700 WP industrial robot with a KRC4 controller, manufactured in 2016. This robot has been fully overhauled! The controller includes the following options: KUKA.CPC KUKA.Platform BoardPackage ExpertTech KUKA.PROFINET MS KUKA.UpdatePackageFirmware KUKA.UpdateService KUKA.UpdateServiceConfiguration Cedpfxozwfmzs Adrerh

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Cedpozw Ucxsfx Adrerh Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Codpfxozw Ug Re Adrerh Conformity marking: CE

Condition: used, functionality: fully functional, The IBD Wickeltechnik industrial unwinding-shaft assembly is designed to support and controllably unwind rolls of web material. It incorporates an unwinding shaft supported by KL.S-series foot-mounted safety chucks, a CX.250.4 single-disc pneumatic brake, and forced cooling from a 24 V DC fan. The safety chucks allow for rapid shaft loading and removal, while the locked closure secures the journal during operation. The brake uses four pneumatic calipers, a 250 mm self-ventilating cast-iron disc, and a modular design that enables control of the braking torque through air pressure. The assembly is mounted on an adjustable, wheeled steel transport frame. Manufacturer: IBD Wickeltechnik GmbH Device type: industrial unwinding-shaft assembly with pneumatic brake Safety chuck model: IBD-KL.S.O.1800.0380.1.40.VT Safety chuck series: KL.S Safety chuck configuration: foot-mounted Maximum shaft and roll weight: 1800 kg Maximum safety chuck torque: 380 Nm Square journal range: 30–40 mm Triangular journal size: 36 mm Brake model: CX.250.04.28.0/V.24 Brake type: pneumatic, single-disc, air-cooled Crodjzw Uilepfx Adroh Number of brake calipers: 4 Brake disc diameter: 250 mm Disc material: cast iron Minimum braking torque: 6 Nm at 0.2 bar Maximum braking torque: 640 Nm at 6 bar Maximum permissible brake speed: 2500 rpm Fan voltage: 24 V DC Safety chuck serial number: 6800.37879.1/47.18 Brake serial number: 6800.37879.12/47.18

Condition: new, Year of construction: 2025, functionality: fully functional, Two new SKF piston pumps with reservoirs are for sale. Due to a change in the ongoing project, they cannot be used as originally planned. Manufacturer: SKF Type: PPU-35-2.5W Available quantity: 2 Condition: New, unused, as they are not suitable for our project Lubricants: Oils and greases up to NLGI class II Pre-pressure: max. 30 bar Operating pressure: 4.5 - 10 bar Output pressure: max. 160 bar Adjustable flow rate: PPU-5: 0.1 - 0.5 cm³/stroke, ratio: 1:28 PPU-35: 0.7 - 3.5 cm³/stroke, ratio: 1:25 Crjdpfx Ajzt Hqtedrjh Compressed air connection (P1): M10x1 Lubrication line connection: for Ø 10mm Suction connection: M18x1.5 Lubricant reservoir: 2.5 kg or 5 kg Level switch for minimum grease level optional Price per unit: €3,350 net

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02343, EVT GIGANT Vapor Degreasing System The system offered is ideally suited for the reliable removal of oils and oily residues from metal parts using the vapor degreasing process. Thanks to the generously sized work basket, high throughput rates are possible. Since this design does not include flooding of the work chamber, the required solvent volume remains relatively low, despite the large chamber size. This system is in good used condition and can be inspected and tested in our technical center in D-75447 Sternenfels by arrangement. Technical highlights: Crjdezrw Dbepfx Adrsh - The system recently underwent a comprehensive maintenance service by EVT. - The system was inspected for compliance with the German Federal Immission Control Act (BImSchV) by Chemlab as recently as March 2026. - The system was approved by DEKRA in July 2026. System features: - Closed system without exhaust air - Top loading - Rotating and pivoting device - Spray device - Flooding device with heated feed tank - Vapor degreasing - Recirculating air drying - Activated carbon module (designed for 2-shift operation) - Atmospheric distillation - Solvents that can be used: Perchloroethylene (PER) - Basket dimensions L/W/H: 1100x450x370 mm (internal dimensions) or alternatively 6 x 480x320x200 mm (external dimensions) - Throughput: max. 2 batches/h - Compressed air: 6 bar System availability: from October 2026 P.S. This offer is non-binding and subject to change. Modifications, errors and prior sale expressly reserved.

Condition: excellent (used), Year of construction: 2014, Year of manufacture: 2014 Load capacity: 210 kg Reach: 2696 mm Weight: 1068 kg Cjdpfx Aezq Ayxsdrjrh Serial number: 638091

Condition: new, Year of construction: 2025, functionality: fully functional, DOBOT Robot CRAF Series CR20AF The next generation of force-controlled cobots The DOBOT CRAF series is designed for high-end manufacturing applications such as precision assembly, complex grinding, and medical automation. It redefines intelligent force control with its proprietary algorithms and integrated high-resolution sensors. It offers plug-and-play operation without installation or deployment, enabling adaptive force applications and seamless human-robot collaboration – setting a new standard for precision, safety, and ease of use in intelligent manufacturing. Maximum payload: 20 kg Working radius: 1,700 mm Repeatability: ±0.05 mm All-in-one force control, plug-and-play Based on the CRA series, the CRAF series features a highly precise 6-axis force sensor integrated into the flange, providing the cobot with enhanced, compliant force control and precise operating capabilities. Intelligent force control with safety and reliability Gentle pulling – easy to control The entire flange serves as an active resistance zone for intuitive teaching. Assembly Users can restrict the orientation for precise path programming. Credpfszm Rwqsx Adrjh Welding Thanks to the extremely low starting force (< 2N), the CRAF robot can be easily controlled by touching it with a straw. This enables millimeter-precise drag learning and achieves point-to-point accuracy of 0.1 mm. Polishing The CRAF robot maintains constant force with automatic compensation, ensuring flawless performance in high-precision applications such as grinding and polishing car parts. Healthcare The robot features real-time detection of the external environment (e.g., detection of height differences on the table) with automatic surface scanning, enabling adaptive motion control for precise task execution based on environmental feedback. Other collaborative scenarios With integrated force-sensitive collision detection (sensitivity up to 1 N), the CRAF robot significantly reduces collision forces while achieving industry-leading shock resistance of 2000 N – allowing it to reliably handle frequent operating shocks and collisions due to disturbances in real-world applications. Application scenarios: welding, loading and unloading, gluing, transporting Further details, article numbers and images are available on request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The statutory value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping costs vary depending on the number of items, weight and desired delivery conditions. Due to the weight and size of the robot, it can be shipped within Germany for €95 gross. Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify delivery address.

Condition: used, Year of construction: 2022, machine/vehicle number: 102003026, overall weight: 341 kg, load capacity: 600 kg, protection type (IP code): IP52, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 600 kg Max. speed: 2 m/s Protection rating: IP52 MACHINE DETAILS Crsdszwn S Topfx Adreh Dimensions & Weight Transport dimensions (L × W × H): approx. 1,380 × 1,000 × 1,180 mm Weight: approx. 341 kg The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Year of construction: 2016, condition: as good as new (ex-display), Round industrial tent, brand SUIHE, new, model: XL-308515R, year of manufacture 2016 Dimensions: width 9.15 m x length 26 m x height 4.57 m Structure: galvanized steel structure, Φ60*1.8mm and Φ40*1.5mm, made of Q215 steel tubes, according to GB/T700-2006 standard. Tarpaulins: PVC material thickness 300g PE, double fabric covered with PVC, factory colors: green or white. Access door type: simple mechanical door Door dimensions: 3.5 m x 3.5 m Csdpfei Hc Drsx Adrjrh Snow resistance: 2.28 kpa (Compressive stress at a deformation) Wind resistance: 80km/h Standard duration of use: more than 15 years. Uses: industry, agriculture, material storage, car storage, hangar, Increased resistance, easy to assemble and disassemble, large capacity, excellent stability. The tent material is green with white. Model dimensions in meters: XL-308515R 9.15*26*4.59 (W*L*H (m)) 300g PE Metal box packaging Transport metal box dimensions 2.95m*0.75m*1.18m Tent weight: 1300kg Use of SUIHE industrial tents: 1. Agriculture: shelter for animals and storage space for hay. 2. Aviation: hangar for planes 3. Space for storing machines, industrial equipment, temporary hall 4. Navy: ship storage, containers 5. Garage for vehicles etc. PRICE 8.500 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2000, functionality: fully functional, overall weight: 1,570 kg, Fanuc robot equipped with polishing brushes, designed for edge finishing of panels and similar materials in wood production. Crodpfx Adszb Dacereh