Used Microstep Mastercut-Am 9001.20 Mit Laserpointer for sale (13,454)

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation Kodeh R Taqopfx Am Nelr - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) Kedpfxjmhhy Nj Am Nolr - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: used, mileage: 200 km, power: 125 kW (169.95 HP), first registration: 01/2026, fuel type: diesel, empty load weight: 1,950 kg, maximum load weight: 1,275 kg, overall weight: 3,225 kg, wheelbase: 3,100 mm, next inspection (TÜV): 01/2028, color: grey, emission class: euro6, number of seats: 2, loading space volume: 6.6 m³, loading space length: 2,600 mm, loading space width: 1,770 mm, loading space height: 1,433 mm, construction height: 1,983 mm, working width: 2,032 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, traction control, Navigation via smartphone possible, automatic transmission (8-speed), automatic climate control, second key with foldable remote control, electrically adjustable and heated exterior mirrors, electrically folding exterior mirrors, front electric windows with quick down/up function for driver and passenger side, onboard computer, radio with 13-inch multifunction display and SYNC 4, driver assistance systems: hill start assist, lane keeping assist, emergency braking assistant, traffic sign recognition, driver fatigue alert, cruise control, intelligent speed limiter, leather multifunction steering wheel, front and rear parking assist system, rear-view camera, metal partition wall in the cargo space, summer tires, heated windscreen, light sensor, rain-sensing wipers, high-beam assistant (automatic dimming headlights), LED headlights, LED daytime running lights, 17'' alloy wheels (6 double spokes), digital radio reception (DAB/DAB+), Ford SYNC 4 with AppLink and touchscreen, Bluetooth hands-free system, USB interface, Apple CarPlay, Android Auto, emergency call system, tire pressure monitoring system, tinted heat-insulating glass, seat heating, tachometer, driver airbag, switchable passenger airbag, curtain airbags, front passenger and side airbags, anti-lock braking system (ABS), electronic stability program (ESP), KeyFree system, comfort seats, center armrest, Seat Package 12: driver comfort seat with armrest and lumbar support, start/stop system, diesel particulate filter, full service history, right-side sliding door for cargo/passenger area, electronic immobilizer, induction charging tray for mobile devices, spare wheel (emergency wheel), outside temperature display, power steering, paint: Magnetic Grey, metallic, intelligent acceleration control, Driver & Technology Package 2, wrong-way driver warning function, pre-collision system, lane change warning system, integrated turn signal in exterior mirror, FordPass Connect incl. eCall, recirculation heater, truck registration, permitted total weight 3.20 t, exterior mirrors and bumpers painted in body color, LED turn indicators, front and rear mud flaps, bodywork: standard panel van, wheelbase: 3100 mm, drive type: front-wheel drive. Over 150 vans and buses in stock. Financing or leasing available through Santander Consumer Bank, Targo Bank, or Auto Europa Bank—our team will be happy to advise you. This offer is non-binding; no guarantee for equipment details. Listed features are subject to confirmation. Modifications, errors, and prior sale reserved. Delivery available for an additional charge. Export license plates available on site. Trade-in of your old vehicle possible. Retrofitting available for: - tow bars (up to 3,500 kg possible) - auxiliary heaters - display for rear-view camera and/or navigation via smartphone (Android Auto) - reversing system with rear camera - workshop equipment - cruise control - tail lift (LBW) installation and further tailored solutions for your business needs available at additional cost. Kljdpfx Aeyw N S Dem Ner

Condition: used, Year of construction: 1995, functionality: fully functional, controller model: DNC 80, degree of automation: manual, Jonescheit Hytap 30 with DNC 80 – robust press brake featuring proven control system For sale is a Jonescheit Hytap 30 equipped with DNC 80 control. This is a robust and reliable press brake suitable for use in both workshop and production environments. The machine is designed for precise bending operations and stands out due to its solid construction and user-friendly operation via the DNC-80 control unit. It is an attractive solution for companies seeking a fully functional and immediately available press brake. Kledpfoyxakysx Am Nor Specifications: Manufacturer / Model: Jonescheit Hytap 30 Control: DNC 80 Year of manufacture: 1995 Type: manual Condition: used, fully functional Notes: The machine is sold without tooling. Inspection and test run on site are possible. Condition: Used and ready for operation. Conclusion: A solid press brake for operators seeking a field-proven machine with DNC control. Ideal for on-site inspection and functional testing.

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Ksdpfxjyxr T Ts Am Njlr Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2015, loading space length: 11,150 mm, loading space width: 2,550 mm, loading space height: 3,800 mm, loading space volume: 39 m³, total length: 11,590 mm, total width: 2,550 mm, suspension: air, wheelbase: 7,810 mm, Year of construction: 2015, Equipment: ABS, = Additional Options and Accessories = - ADR certificate - BPW axles - EBS - Alloy rims - Air suspension - Disc brakes = Remarks = Kjdex Ezikepfx Am Nolr Very nice Van Hool foodstuff tank semi-trailer, year of manufacture 07/2015, with a 39,000 l capacity and 3 compartments (Compartment 1: 7,000 l / Compartment 2: 25,000 l / Compartment 3: 7,000 l), ABS/EBS, 3 x BPW Eco-Plus axles with disc brakes, ALCOA rims, ADR certificate (FL, AT), unladen weight: 7,460 kg, maximum weight: 39,000 kg, tyres 385/65-R22.5 (L: 7/15/10mm; R: 9/8/10mm), Dutch registration with valid technical inspection (APK) until: 20/04/2026 = Additional Information = Axle configuration Axle brand: BPW DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 55% Rear axle 2: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 95%; Tyre tread right: 50% Rear axle 3: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Weights Unladen weight: 7,460 kg Payload: 31,540 kg GVW: 39,000 kg Functionality Number of compartments: 3 Condition Technical condition: very good Visual condition: very good Identification Registration number: ON-59-VY Further information Please contact Arne Honingh for further information.

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 04/2026, fuel type: diesel, overall weight: 3,225 kg, color: grey, gearing type: automatic, number of seats: 5, total length: 5,450 mm, total width: 2,275 mm, total height: 1,964 mm, loading space length: 2,004 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 17525 Errors and prior sale reserved! ---- SPECIAL EQUIPMENT * Electrical preparation kit for trailer coupling (wiring harness and trailer module) * Heated steering wheel with Sensico leather-look * Seat Package 12: Driver’s seat manually adjustable in 4 directions – front passenger seat individually adjustable in 4 directions – seat heating for driver and passenger – inner armrest – lumbar support for driver and passenger – side airbags, left and right – front head-shoulder airbags, left and right – Barlo Style fabric upholstery in Black Onyx, seat back and side bolsters in fabric in Euro New Onyx * Socket: 12-volt connection in loading/passenger compartment * Technology Package 6: Exterior mirrors electrically adjustable, heated and power-folding – audio system with 13-inch multifunction display, Ford SYNC 4 incl. navigation – Blind Spot Assist incl. Cross Traffic Alert reverse emergency braking assist – Pre-Collision Assist, camera- and radar-based – Driver Drowsiness Detection – Lane Keeping and Lane Change Assist – Lane Centering Pilot – Traffic Sign Recognition – Wrong-way Alert – Park Pilot System front/rear – Adaptive Cruise Control incl. Stop&Go – Intelligent Speed Limiter with speed limit display – 360-degree camera – Steering wheel, Sensico leather-look FURTHER EQUIPMENT * Two-stage unlocking for passenger and cargo compartment * Passenger airbag * Driver airbag * All-wheel drive * Anti-lock braking system with electronic brake-force distribution * Battery: H7 AGM single battery * On-board computer with fuel consumption and mileage data (e.g., remaining range) and outside temperature display * Roof console * Double-wing rear doors with door hinges (no windows) – 90 degrees – unlockable up to 168 degrees * ESP – Hill Start Assist – Emergency Brake Assist – Traction Control * Vehicle modem – 5G WiFi hotspot modem – Information on current vehicle status or location, as well as control of selected vehicle functions via smartphone with the Ford app – Real-time traffic information (when paired with navigation system) – WiFi hotspot (up to 5G/LTE, for up to 10 mobile devices) * Windows: Side windows, 2nd row, fixed, right and left * Electric front windows – with quick up/down feature for driver and passenger * Electric parking brake * Ford Key Free System – incl. Ford Power Start function * FordPass Connect – incl. live traffic information and 5G WiFi hotspot modem * Heated windscreen * Grab handles, driver and passenger side * Lockable glove compartment with lid * Interior lighting in passenger compartment * Front interior lighting * Front automatic climate control – with recirculation heating – with R-1234yf refrigerant * LED headlights – LED high beam – LED low beam – LED daytime running lights incl. integrated LED indicators at the front – static cornering light – High Beam Assist * Cargo area lighting (LED) – extra bright * Load compartment floor: "Easy Clean" vinyl flooring * Small center console * Driver drowsiness detection * Emergency call assistant eCall emergency system * Particulate filter: Diesel particulate filter * Radio accessories: 4 speakers * Tire repair kit * Tire pressure monitoring system Kljdpjyxix Hofx Am Nor * Wheels: Alloy wheels 6.5 J x 16 – with 215/65 R 16C 109 T BSW tires – in Sparkle Silver * Gear lever on the steering column * Wipers with rain sensor * Sliding door, right * Front and rear mud flaps * Half-height side wall cladding * Power steering * Safety belts – seat belt pretensioners and force limit

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 85-70, Self-cleaning overband magnet with frame. Suitable for conveyor belt width of 1200 mm. Working length 1470 mm x working width 645 mm. Kjdex Tid Ejpfx Am Nslr

Condition: used, mileage: 32 km, power: 121 kW (164.51 HP), first registration: 06/2025, fuel type: diesel, number of seats: 18, gearing type: automatic, emission class: euro6, color: grey, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: Errors and prior sale reserved! SPECIAL EQUIPMENT * Seat Package 15: Driver's seat manually adjustable in 4 ways - Front passenger double seat with storage compartment - Height-adjustable headrests - Tray on front passenger double seat - Heated seats for driver and front passenger (outer seat) – Inner armrest for driver – Lumbar support for driver – Seat upholstery: fabric * Auxiliary heating package 1: fuel-operated water heater, programmable, incl. remote control * Technology package 18: Heated windshield - Wipers with rain sensor - Active Park Assist with parking in/out functions incl. front & rear Park Pilot system plus side sensors - Active emergency braking assist (radar-based) - Lane keeping assist with drowsiness alert and high beam assistant, plus lane keeping and lane change assist – Headlights with day/night sensor – Blind spot assistant – Intelligent adaptive cruise control – 360° camera – LED downlight – Reverse emergency braking assist – Fog lights – Exterior mirrors electrically adjustable, heated and folding – Automatic climate control – Ford audio system with 12-inch multifunction display and Ford SYNC4 – Navigation system FURTHER FEATURES * 2 batteries * Axle load increased – front to 1850 kg * Driver airbag * ABS with electronic brakeforce distribution – ESP with traction control – Hill start assist – Crosswind assist – Safety brake assist – Rollover protection – Emergency braking support incl. emergency brake light * Battery run time, programmable for 10 minutes * Fully rubberized floor throughout vehicle length * On-board computer with fuel consumption and mileage range (e.g., remaining range) plus outside temperature indicator and Ford ECO-Mode * Twin rear doors with 180° opening angle (with window) – heated rear windows, rear window wiper incl. washer nozzle and automatic activation when reverse gear is engaged * Windows: Vent windows, 4th row left and right * Windows: Sliding window, 2nd row left * Electric windows – with quick down/up function for the driver’s side * Fire extinguisher – located in front of the passenger double seat * Ford Easy Fuel – comfort fuel filler cap and misfuel protection * Ford Power Start function (keyless start) * FordPass Connect incl. live traffic information and Wi-Fi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Speed limiter 100 km/h – non-switchable * Lockable glove compartment Klsdpfxjywc S Do Am Ner * Air conditioning in front and rear – incl. rear water heater – incl. automatic climate control * Fuel tank 70 l * Package: Rear seat package 8 – 17/18 seats – 1st row: double seat left with one ISOFIX mount – 2nd row: double seat left, single seat right – 3rd row: double seat left, single seat right – 4th row: double seat left, single seat right – 5th row: four-seat row (double seat center/single seats outside) * Particulate filter: diesel particulate filter * Radio accessories: 12-inch multifunction display and Ford SYNC 4 – voice control – Bluetooth and USB interface – hands-free kit – media integration – emergency call assistant – Ford Power-Up software updates – Android Auto and Apple CarPlay, AppLink (wireless) – capacitive touchscreen technology – 15 different languages * Wheels/tires: Spare wheel, steel wheel * Wheels: Dual rear tires – 6J x 16 steel rims with 195/75 R 16 tires – incl. spare wheel * Headlight dipped beam: Bi-xenon headlights with static

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 06/2025, fuel type: diesel, overall weight: 3,250 kg, color: red, gearing type: automatic, emission class: euro6, number of seats: 4, loading space length: 2,030 mm, loading space width: 1,840 mm, loading space height: 350 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Errors and prior sale excepted! Internal number: 23496 ---LOCATION: 04425 Taucha, Gerichtsweg 4 Inquiry phone number: Mr. Ralph Bergel: ---SPECIAL EQUIPMENT * Comfort Package 1: Inductive charging station for mobile devices - 400-watt voltage converter - switch set - 6 switches * Load compartment protection tray - integrated lashing eyes - 12-volt outlet at the rear on flatbed * Outdoor Package 2: Engine and fuel tank guard, steel - 100% locking rear differential * Programmable auxiliary heater with remote control * Technology Package 68: Adaptive cruise control incl. intelligent speed limiter - Blind spot assistant with trailer cover detection - 13-pin towing equipment - Advanced lane keeping assistant incl. lane keep assist and drowsiness warning - Park Pilot system front and rear - Reverse emergency braking function - 360-degree camera with "Split View" technology * Conversion to 3-side tipper: hot-dip galvanized lightweight steel profiles - fold-down side panels - lashing eyes integrated into the chassis frame - 4 ball tipping bearings with 2 plug pins to set the tipping direction - hydraulic cylinder operable from cab - acoustic warning when tipper body is not lowered - LED tail lights FURTHER EQUIPMENT * ABS * Two front tow hooks * Four-wheel drive (switchable) with electronic transfer case selection Kedpfx Amsx Nlbrj Nolr * Towing preparation kit * Exterior mirrors electrically adjustable, heated, electrically foldable * Battery management system * Light-colored woven fabric headliner * Theft alarm system incl. double locking with interior monitoring * ESP * Electric windows * High beam assistant * Ford Easy Fuel - comfort fuel filler and misfueling protection * Ford Key Free system * FordPass Connect incl. eCall and WLAN hotspot * Heated windshield * Extendable cup holder * Auto-dimming rearview mirror * 8-inch digital instrument panel * Integrated rear step * 2-zone automatic climate control with dust and pollen filter * LED fog lights * LED headlights * Heated multifunction leather steering wheel * Front center console with integrated armrest * Package: Off-road package - rotary switch driving modes - Terrain Management System with 6 selectable drive modes - Off-road SYNC display * Package: Wheel Package 35 - 4 alloy wheels 7.5J x 18 with 255/65 R 18 all-season tires, Asphalt Black Matte-Silver - 18” aluminum spare wheel * Package: Rear seat 18 - two folding emergency seats with two 3-point seat belts - seatbelt warning front and rear * Package: Safety Package 2 - Advanced airbag restraint system - front passenger - passenger airbag deactivation function - driver’s front airbag - driver and passenger seats with reinforced side bolsters - knee airbags for driver and passenger - curtain airbags above side windows - side airbags for driver and passenger - reinforced body structure - reinforced chassis * Package: Seat 7 - driver's seat 8-way electrically adjustable incl. lumbar support - front passenger seat 4-way manually adjustable - seat heating for driver and passenger - map pocket on driver’s seat back * Diesel particulate filter (DPF) with SCR catalytic converter * Upholstery: Leather * Pre-Collision Assist including distance indicator and warning, forward collision warning and active emergency braking system * Radio: Audio system 89: Audio system

Condition: used, MicroStep MG 18001.30 PraG Dimensions: 18,000 x 3,000 mm 1x plasma rotator: renewed in 2022 1x straight oxy-fuel torch Hypertherm HPR 260XD plasma source Excluding filter unit Klodpsytga Nsfx Am Nor

Condition: good (used), MicroStep SPL-PA Plasma Cutting System with Extraction and Compressor Technology Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Machine type: CNC plasma cutting system CNC control: iMSNC Kledpfx Aeyvd Uijm Nsr Design: gantry construction with linear guides Extraction unit: Donaldson Torit DCE Electrical connection (extraction unit): 400 Volt Motor power (extraction unit): 7.5 kW Compressed air generation: screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE certification: available Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. Klsdpfx Asxdu Tqom Nsr - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality - Ready for immediate use - 380V, 5.5kW - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Condition: used, axle configuration: > 3 axles, first registration: 09/2018, total length: 11,830 mm, total width: 2,550 mm, total height: 3,720 mm, suspension: air, tire size: 235/75R17,5, color: other, Year of construction: 2018, Equipment: ABS, tail-lift, = Additional options and equipment = - EBS - Hydraulic system - Tail lift = Notes = Number of axles: 4, unladen weight: 9,900 kg, gross weight: 40,000 kg, chassis type: complete chassis, chassis material: steel, suspension type: full air suspension, ABS, EBS, hydraulic system, body year: 2018, body material: steel, ramps: hydraulically operated, axle type: BPW, tail lift, tail lift version: rear flap, tail lift material: steel, wheel recess / double hydraulic ramps / 40T technical / galvanized / extendable = Further information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: twin tyres; steering; left inner tyre tread: 10 mm; left outer tyre tread: 10 mm; right inner tyre tread: 11 mm; right outer tyre tread: 10 mm Axle 2: twin tyres; left inner tyre tread: 8 mm; left outer tyre tread: 7 mm; right inner tyre tread: 7 mm; right outer tyre tread: 7 mm Axle 3: twin tyres; left inner tyre tread: 7 mm; left outer tyre tread: 7 mm; right inner tyre tread: 10 mm; right outer tyre tread: 10 mm Axle 4: twin tyres; left inner tyre tread: 7 mm; left outer tyre tread: 6 mm; right inner tyre tread: 4 mm; right outer tyre tread: 6 mm Weights Unladen weight: 9,900 kg Payload: 30,100 kg Gross vehicle weight (GVW): 40,000 kg Operational Tail lift: rear flap Loading platform height: 89 cm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none Kljdpfxjyqp Tmj Am Nsr = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can select from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European makes, years, and price categories. Why buy from Kleyn Trucks? Simple! • Large and fast-changing inventory • Recognisable quality • Competitive prices • Reliable business conduct • Multilingual support • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Professional technical services • The assurance of "recognisable quality" • And more.... Visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and submit an inquiry via our website. Ask directly about our European warranty packages.

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, working range: 9,000 mm, sheet thickness (max.): 100 mm, overall weight: 1,100 kg, input voltage: 400 V, total width: 3,500 mm, cutting current: 154 A, input frequency: 50 Hz, We are offering this used MicroStep 9001.35P plasma cutting machine, year 2020. Type: MasterCut Model: 9001.35P Serial No.: 2815 Year of Manufacture: 2020 Rated Current: 154 A Ksdpfx Ajyu Hkwsm Nelr Short-Circuit Current: 6 kA Weight: 1,100 kg IP Protection: 43/20 Power Supply: 3L+N+PE AC 400/230V, 50Hz If you have any further questions or require more information, please send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2005, 0.33 l, pack of 24 0.5 l NRW 0.5 l swing top 0.7 l Klodpfjyry H Hex Am Nsr

Condition: excellent (used), Buderus 455 kW. Oil emergency heating system. Low-temperature boiler, can also be equipped with a biogas burner. Kledpfxex U Exue Am Nsr

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available Klodpfxsyq Rdys Am Nsr The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 4100 mm Measurements depth 10169 mm Machine weight 5500 kg Klodpfx Amex D Ey Is Ner Control Unit Brand MicroStep Model IMSNC Main Drive Number of axis 3 This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information. Application Types Cutting

Condition: excellent (used), Year of construction: 2011, Cell with Kuka KR 180 grinding robot Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 - max. belt dimensions 3500 x 30 mm - max. contact pulley diameter 200 mm - motor power 4 kW 2 x polishing stations, - polishing wheel diameter 350 - 600 mm Kjdpfeg Saqvex Am Nelr - power 5.5 kW Gripper change cabinet Belt conveyorInteroll Automation GmbH - Total length approx. 2000 mm - Belt width approx. 440 mm The price includes a complete concept as you can see on the video We have 4 such cells. It is possible to make every detail as you can see in the video

Condition: ready for operation (used), Year of construction: 2011, This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine. Application Types Kjdpfx Aox D Hz Hem Nolr Cutting

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC machining center • Homag BOF 321, year 1998 designed for the production of stairs and other components. • Homag PC83 control system • Working area X = 5,200 mm • Working area Y = 1,300 mm • Working area Z = 410 mm • Number of milling spindles: 2 • Milling spindle motors: 12 kW • Maximum speed: 24,000 rpm • Swivel arm: Yes • 4-axis machine • Tool clamping system: HSK-F63 • Two tool magazines: 12 tools each • Double working area • Number of operator consoles: 10 • Vacuum pump: 2 • Vacuum pump capacity: 100 m³/h • Safety device: safety mat • CE marking: Yes Ksdpfxjx S Ewrj Am Nslr

Condition: used, Year of construction: 2014, operating hours: 10,000 h, functionality: fully functional, Extraction table from Pötter with connected extraction by Ruwac (Ex protection) Kljdpfx Amowy Rurj Ner

Condition: excellent (used), Interroll roller conveyor 0.99m with drive The Interroll roller conveyor element is in a very good condition. Furthermore, the roller conveyor has its own drive motor. Kodehvmi Topfx Am Nelr Width: 400mm Length: 990mm Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2104796, GEM F470 automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 Kjdpfx Amsykugxs Nslr TECHNICAL DATA: - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Illustration may contain options subject to surcharge