Used Mikron 102.05 Mps for sale (556)

Condition: new, “Partially unpacked for photography – unused item from warehouse clearance” Bdodpozh Avhsfx Afwjg Quantity: 5 available Bus module MVK-MP DIO8(DIO8) Metal 55309 0.67720229 00076 # MURRELEKTRONIK

Condition: used, Year of construction: 2011, For sale: a vertical machining center Manufacturer: AGIE MIKRON / GF AgieCharmilles Type: HPM 600 HD Year of manufacture: 2011 Control system: HEIDENHAIN iTNC 530 Technical data / equipment: Bedpfxjzk Erks Afwedg Travel distances X/Y/Z: 600 / 600 / 500 mm Spindle speed: up to 20,000 rpm Tool holder: HSK-A 63 Tool changer: 60 positions Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 6.5 kg Max. workpiece weight: 500 kg Feed rate X/Y/Z: 40 / 40 / 30 m/min Table adjustable in degrees Chip conveyor Coolant system Dimensions: approx. 3,500 x 2,350 x 3,050 mm Weight: approx. 9,500 kg According to the operator, the machine is in very good used condition. Inspection possible by appointment. ____ Subject to prior sale and errors in the technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 590 h, load capacity: 2,500 kg, lifting height: 4,300 mm, free lift: 1,330 mm, fuel type: diesel, mast type: triplex, construction height: 2,320 mm, power: 37 kW (50.31 HP), fork carriage width: 1,600 mm, fork length: 1,200 mm, empty load weight: 4,400 kg, total length: 4,240 mm, drive type: Diesel, construction width: 1,800 mm, Rough terrain forklift Load centre: 500 mm Fork width: 100 mm Fork thickness: 40 mm Bjdpfxozrcbre Afwodg Mast type: Triplex Technical condition: good Front tyre type: pneumatic Front tyre size: 12.5/80-18 Front tyre condition: 80 - 100% Rear tyre type: pneumatic Rear tyre condition: 80 - 100% Description: MACHINE IN STOCK, FULLY EQUIPPED AND READY FOR IMMEDIATE DELIVERY!!! 03.2026 MP photos Sideshift, 3rd valve, 4th valve, front work lights, full cabin, CE certificate, COMFORT SEAT, STVGO REGISTRATION PREPARATION / REVERSING ALARM / JOYSTICK CONTROL RIGHT

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 68, Equipment: cooling unit, documentation/manual, MIKRON HSM 400 U vertical machining center, equipped with HEIDENHAIN TNC 530, manufactured in 2007. Gantry structure. Table equipped with EROWA ITS 148 receiver. Travel: X 400, Y 240, Z 350, B +110°/-110°, C 360°. Feed rate: X, Y, Z 40 m/min. Table load: up to 25 kg. Electromandrel head, 42,000 rpm, 12/13 kW, HSK E40. X, Y, Z linear scales. Bdsdpfx Afszru Idjwjg Chip extractor. Head coolant unit. 68-tool changer. Machine weight: 7,000 kg.

Condition: used, ESCO ESCOMATIC D 6 SR is an Automatic lathe engineered for precision machining, high accuracy and reliable production. Capacity: diameter of work admitted 6 mm; with flat cames max turning length 62 mm; spindle hole 6 mm. Specifications: 3 spindle speeds from 2400 to 6000 rpm; 3 tool cutters; turret slide/revolver 1a (D6-8-Mp 103/a) with 4 tools; voltage 60Hz 220/440 V; total power 2.5 CV; machine weight approx. 1150 kg; footprint L1500 × W1000 mm. Key equipment: turret (D6-8-Mp 103/a) and cam disc. Delivers tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical sectors. Bdsdpjyxnv Defx Afwog

Condition: excellent (used), Year of construction: 2020, operating hours: 2,450 h, functionality: fully functional, cutting width (max.): 1,270 mm, cutting length (max.): 1,680 mm, type of input current: three-phase, cutting height (max.): 50 mm, Equipment: safety light barrier, ESKO Kongsberg X20 Light Sign (instalata in februarie 2020 si cu 2450 ore de functionare) - Working area 1680x1270 mm, - Incl. basic X20 starter table, felt cutting underlay, shipping crates, - FlexiHead with 3 insert positions, - 6kW vacuum pump, PC & iPC Sign Standard, camera. - Table mains 230V - Pump mains 3 x 380 V - iCut Production Console software Tools : - Basic Folding Carton Kit - Multi Purpose High Frequency(MP-HF) Knife Tool (for cutting corrugate cardboard) - Folding carton crease tool (15mm) incl crease wheels - Crease Tool (60 mm for creasing corrugate cardboard) - Psaligraphy knife tool, incl. 2x SR6150 and 2x SR6151 blades Bedpfx Ajzdk Iwjfwjdg - Rigid Material Knife tool (for 8mm knife blades) - KissCutting Knife tool (incl 6x sign foil knife bl) - Incl 2 different pressure springs; - Incl 3xKC101+3xKC102 knife blades; - Removable&adjust.depth control cup; - Hand tool for knife blade change

Condition: used, Year of construction: 2013, HEDELIUS C50 C50/40/530/1800/8 Machining Center ==> Spindle running time: 8,997 h Manufacturer: HEDELIUS Model: C50 Year of manufacture: 2013 Control system: Heidenhain Machine weight: approx. 5,500 kg Technical data Travel in X: 1,800 mm Travel in Y: 510 mm Travel in Z: 480 mm Table size: approx. 2100 x 510 mm Feed rate: up to 8,000 mm/min Spindle speed: up to 30,000 rpm Spindle running time: 8,997 h Program running time: 10,446 h Equipment Heidenhain CNC control system Fully enclosed machining center Central lubrication system Coolant system Electronic handwheel Tool magazine Documentation available Description The machine is in very good condition and can be inspected while powered on after prior arrangement. With an X-axis of 1800 mm, the machine is ideally suited for machining long workpieces in tool, machine, and fixture construction. The comparatively low spindle running hours of only 8,997 hours are particularly noteworthy. The machine has a Heidenhain control system and reaches spindle speeds of up to 8,000 rpm. The HEDELIUS C50 stands for high precision, stability, and reliability "Made in Germany" and is ideally suited for both single-part and series production. Inspection: Possible by appointment in Bremen. Bsdpfxjzc Rcto Afwedg _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Bedpfxozdc D So Afwodg Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Condition: like new (used), Machine ready for operation Year of manufacture: 2014 Manufacturer: Dozo-Pak Bydgoszcz Type: MP-450 Bdjdpfxsy R Ecfe Afweg Power: 4 kW Weight: 260 kg Voltage: 400 V The listed price is for one mixer unit; four identical units are available Option to purchase a piston pump, Type PT-1, manufactured by Dozo-Pak in 2014 Price: 1,500 EUR per piston pump Please check out my other listings

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Year 2007 LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity. Bdjdpfxeyylqbe Afwog

Condition: used, mileage: 736,000 km, power: 350 kW (475.87 HP), first registration: 12/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2026, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Mercedes 1848 LS / MP 5 / LOW DECK / German vehicle / 1 owner Bdedjy H Ti Eepfx Afweg Lockable overhead storage above the windscreen, alarm system, LED ambient lighting (driving and living area), work lights, equipment package: Economy, equipment package: Climate, equipment package: Safety, equipment package: Visibility, exterior mirror on passenger side with maneuvering position, air horns (2) on cab roof, electrical preinstallation in cab 24V / 100 A, driver assistance system: turning assistant, cab features: shaving mirror, smoke detector, vehicle without MirrorCam exterior camera, regulated alternator 150 A, 12-speed gearbox - type: G 281-12, upper comfort bunk, wide, 3-piece fender, fuel tank: aluminium combination tank - 660 liters diesel + 75 liters urea solution (AdBlue), coolbox / refrigerator, multifunction steering wheel (leather), roof and side aerodynamic fairings (adjustable), illuminated Mercedes star, reinforced engine brake, parameterizable special module, PremiumComfort mattress upper and lower, wheelbase variant 3700 mm, smoker package, residual heat utilization, retarder, acoustic reversing warning (external warning signal), low-maintenance fifth wheel coupling, electric sliding/tilting glass sunroof, additional remote control keys (2), fleet management system interface, drawers under dashboard, seat upholstery: velour passenger and driver seats, cab seats: passenger seat with armrests both sides, cab seats: comfort air-suspended driver's seat, electric sun blind for windscreen, sun blinds for side windows, driver and passenger door, sound system, steel wheels 11.75x22.5 (front axle), exterior left storage flap, additional 12V socket, additional 24V socket in passenger footwell, pre-wiring / switch for lift axle at trailer/semitrailer, sleeping cab curtain, regulated water pump Emission standard EURO 6, axle configuration: 4x2, front axle load 8.0 t, Actros 5, Actros L cab, heated maneuvering/front mirrors, trailer electrics and low brake connection, 24V/15-pin trailer socket, entry on cab left, exhaust right side, equipment package: Powertrain 2, rear axle differential lock, 12th gear torque increase, compressed air connection in cab, steel air tank, air unit with condensate monitoring, medium air unit, automatic driving lights (light sensor), driver assistance systems: Attention Assist (drowsiness detection), Active Brake Assist 5 (autonomous emergency brake assist), lane keeping assist, cab features: fixed cab entry, chrome interior package, hydraulic cab tilt, L BigSpace cab, 2.50 m, flat floor, steel suspended cab, comfort, LED perimeter lights, full air suspension, electric window lifters, tinted windscreen, vehicle without rear wall window, speed limiter, rear axle with active lubrication, unregulated, rear axle crown wheel 440, integral rear, body/chassis: tractor unit, lower comfort bunk, central locking, electronically regulated power steering pump, air intake behind cab, 2-stage air compressor, heated air dryer, engine 12.8 L - 350 kW R6 diesel (OM 471), engine variant OM 471, purpose: local transport, wheelbase not defined, ramp mirror, disc brakes front and rear axle, remote control keys (2), LED flashing side marker lights,

Condition: good (used), Chip conveyor, chip conveyor belt, coolant cleaning, chip disposal, scraper conveyor, scraper conveyor belt, chip chain conveyor, hinge belt conveyor, scraper belt conveyor -Manufacturer: COMAR, chip conveyor comes from a MIKRON VC 500D -Type: VC 500D Bjdpoy Ezacsfx Afwedg -Conveyor belt width: 230 mm/320 mm -Outlet height: 1100 mm -Drive: 0.15 kW / 14 rpm (2.40 m/min) -Individual components: see photos -Dimensions: 720/2630/H1575 mm -Weight: 727 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: CE marking, documentation/manual, CNC NESTING SCM PRATIX S22-31B with AUTOMATIC UNLOADING TECHNICAL FEATURES • Moving gantry, with Bumper safety system • 3 controlled axes: X, Y, and Z • Travel speed on the axes: X: 35 m/min Y: 35 m/min Z: 15 m/min • Usable working area in X: 3,086 mm • Usable working area in Y: 2,155 mm • Usable working area in Z: 150 mm • PRO-SPACE safety system. With this system, the machine does not require perimeter guards or safety mats; the operator has free access to the work area from any side. • MATRIX aluminum table, 2,220 mm x 3,150 mm • 16 retractable pneumatic stops on the table (6+6 in Y and 4+4 in X) • 8 MPS 130x130 mm suction cups, H=25 mm • 4 MPS 150x50 mm suction cups, H=25 mm • SCM TECPAD remote control with digital display, with its corresponding resting base • Lubrication of the guides by means of a centralized drive pump • 2 vacuum pumps of 250 m3/h each, located under the machine structure • Xilog-Plus control software • Maestro Nesting software. Rectangular nesting Bedpfxszav Hxs Afwodg • DXF file import • Pusher for evacuating finished parts, with vacuum cleaning system • Motorized belt table for material unloading, with photocells to read parts at the end. 3,200 mm x 2,180 mm • CE COMPLIANCE • Machine in excellent condition. Year of manufacture: 2014 • Supplied with the instruction manual, machine exploded view diagram, and electrical diagram. OPERATIONAL GROUPS: ROUTER • Electro-spindle power: 6.6 kW / 9 HP. 0 - 24,000 rpm • Air blowers • Mount that allows for the attachment of a horizontal tool • Linear tool changer, TR13 model, with 13 positions • ATC for HSK F63 tool holders • Calibration sensor to automatically measure tool length MULTIPLE DRILLING UNIT • 7 vertical drill holders • 1+1 horizontal drill holders in the X direction • 1+1 horizontal drill holders in the Y direction • 1 vertical disc in the X direction

Condition: good (used), Year of construction: 2001, functionality: fully functional, Horizontal Boring Mill UNION T110 Year of manufacture: 2001 Travel axes: X: 1500 mm Y: 1250 mm (total vertical adjustment) 0 mm - lowest position of the spindle center to the table surface Z: 1000 mm W: 550 mm (quill movement) B: 360° infinitely variable Spindle diameter: 110 mm Transmission steps: 2 Max. spindle speed: 4000 rpm Rapid traverse: 15 m/min Spindle taper: SK 50 Clamping table surface: 1000 x 1250 mm T-slot width: 22 mm Height of clamping surface above floor: 1050 mm Max. table load: 6 t Total weight (complete): approx. 13.5 t Control system: Heidenhain TNC 426 Electronic handwheel Bdedoy Rpm Uspfx Afweg Various tool holders can be purchased additionally.

Condition: used, mileage: 12,000 km, power: 130 kW (176.75 HP), first registration: 08/2025, fuel type: diesel, color: white, gearing type: mechanical, number of seats: 3, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * 5-year manufacturer's warranty for Germany, starting from the initial registration. * Registered as a 3.5-ton vehicle. * Long wheelbase. * Electronic Stability Program (ESP). * Trailer coupling, detachable and lockable. * One towing eye at the front. * Disc brakes at the front. * Front-wheel drive. * Multifunction steering wheel. * Partition, with a fixed window. * Three-point automatic seat belts at the front with electric belt pretensioner. * Double seat bench in the driver's cab on the right. * Seat in the driver's cab on the left. * Enhanced interior noise reduction. * Heated front seats, separately adjustable. * Windshield, heat-reflecting glass. * Central locking "Keyless-Go" without safe lock. * Dashboard with special features. * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation. * Emission concept, WLTP3 N1-III, N2//EU6EA. * Rubber floor covering in the driver's cab. * Wooden floor in the cargo area. * Registered as a truck. * Sliding door on the right in the cargo/passenger compartment. Bdodpozkn Hqefx Afwsg * Exterior mirrors left and right, convex plus wide-angle. * Hinges for rear doors with increased opening angle. * Lashing eyes for securing cargo. * Lane keeping assist. * Radiator protection grille. * C-rails, side and partition. * Interior grab handle (entry at the partition). * Exterior mirrors electrically adjustable, separately heated. * Immobilizer, electronic. * Entry handles on the rear pillar, left and right. * Tire pressure control, frequency 433 MHz high. * Start/stop system with recuperation. * Park assist. * Optional infotainment system (MIB3 MP), version 1. * Side marker lights. * Halogen twin headlights. * Front Assist with warning and braking on vehicles, pedestrians, and cyclists. * Windshield wiper intermittent operation with light/rain sensor. * Key for locking system with remote control. * Daytime running lights with assist headlight. * LED interior lighting concept in the passenger/cargo compartment. * Seat belt warning, E-contact in the seat belt lock. * Wired & Wireless App-Connect. * 4-cylinder turbo diesel engine, 2.0 L/130 kW (4V) TDI. * Online service, with OCU, with head unit coding, without WFS connection. * Driver alert system and fatigue detection. * With front socket. * 6-speed manual transmission. * Preparation for interface for external use, with electrical terminal block. * Battery 520A (92Ah). * Panel van. * With rear view camera system (version 2). * Air conditioning with electronic control. * With side wind assist. * Seat covers in fabric. * With UNECE CS&SU. * Pan-European eCall. * Professional Assistance Package incl. Park Assist & Parking Assist in the front & rear area incl. side protection. * With multifunction camera. * Heat-reflecting glazing. * With traffic sign recognition. * Digital radio reception. * Cd value cladding. * Prepared for VW Connect and VW Connect Plus. * 4-cylinder diesel engine 2.0L assembly 03N.G. * External, USB Type-C data socket(s) and charging socket(s) with increased charging performance. * Hill start assist. * Parking brake. * Navigation system Discover Media with 26 cm (10.4") touch color display with 4 speakers. Conversion service for panel van commercial vehicles possible: e.g. retrofitting trailer hitch 990.00 EUR, trailer load increase 714.00 EUR, front bar 790.00 EUR, cargo area lining from 1390.00 EUR, MIXTO conversion 6990.00 EUR, bench seat system with individual seats 7900.00 EUR. Vehicle is from 1st hand, SERVI

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Bdedsy St Urjpfx Afwjg

Condition: good (used), Year of construction: 2001, Offer 26161 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA - Adjustable reach: 140 - 500 mm - Welding parameters: - Steel sheet: 6 + 6 mm Bedpszfim Iefx Afwodg - Brass sheet: 3 + 3 mm - Aluminum sheet: 1.2 + 1.2 mm - Adjustable electrode force: 17 - 278 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Power supply: 400 V - Space requirement: approx. W 670 x H 1250 x D 1600 mm - Weight: approx. 240 kg - Including: - Welding control system DALEX MPS 200 - Foot-operated switch

Condition: excellent (used), functionality: fully functional, Thermo Scientific ARL 3460 OES Spark Emission Spectrometer Manufacturer: Thermo Electron Corporation / Thermo Fisher Scientific Model: ARL 3460 Machine Type: Optical Emission Spectrometer (OES) / Spark Emission Spectrometer Application Area: Metal Analysis / Material Testing For sale is a used Thermo Scientific ARL 3460 OES Spark Emission Spectrometer for highly precise analysis of metallic materials and alloys. The optical emission spectrometer is suitable for quality control, incoming goods inspection, foundries, steel mills, metal processing, research, and industrial testing laboratories. The system is supplied including an industrial PC, original software, USB license dongle, and SERCAL MP-2000 Rare Gas Purifier. Technical Data: Manufacturer: Thermo Electron Corporation / Thermo Fisher Scientific Bjdpfx Ajzkuftjfwedg Model: ARL 3460 Type: Optical Emission Spectrometer (OES) / Spark Emission Spectrometer Country of Manufacture: Switzerland Supply Voltage: 230 V AC Mains Frequency: 50 Hz Mains Connection: 1 Phase Power Consumption: 3.5 kVA Measurement Method: Optical Emission Spectrometry (OES) Spark excitation for material analysis Fast and precise analysis of metallic materials and alloys Analyzable Elements: According to the visible software configuration, the following analysis elements or spectrometer lines are set up: Copper (Cu) Chromium (Cr) Iron (Fe) Manganese (Mn) Uranium (U) Niobium (Nb) Titanium (Ti) Zirconium (Zr) Phosphorus (P) Sulfur (S) Boron (B) Arsenic (As) Tin (Sn) Carbon (C) Aluminum (Al) Calcium (Ca) Molybdenum (Mo) A total of 22 spectrometer lines are set up in the device software. Software: Thermo WinOE Version 3.2.3 MP1 Gateway Version 1.0-90 ASLViewer Version 1.0-16 ASLEngine Version 1.2-1 Original USB license dongle included SERCAL MP-2000 Rare Gas Purifier: Manufacturer: SERCAL Type: MP-2000 Rare Gas Purifier Gas purification for Argon For supplying the OES analysis system Dimensions: External dimensions (W × D × H): approx. 1,665 × 910 × 1,190 mm Weight: approx. 450 kg Equipment: Thermo Scientific ARL 3460 OES Spark Emission Spectrometer Dell Industrial PC Monitor Keyboard Mouse Original Thermo WinOE Software Original USB license dongle SERCAL MP-2000 Rare Gas Purifier Connection cables Service markings present Original documentation Accessories as shown in the pictures Areas of Application: Metal analysis Material testing Quality assurance Incoming goods inspection Foundries Steel mills Metal processing Melting plants Testing laboratories Research and development Transport Data: Dimensions (W × D × H): approx. 1,665 × 910 × 1,190 mm Weight: approx. 450 kg Transport by freight forwarder required. Loading with a forklift is possible. Condition: Used Optical condition as shown in the pictures. Normal age-related signs of wear are present. Software, original USB license dongle, and extensive accessories are included. Scope of Delivery: Thermo Scientific ARL 3460 OES Spark Emission Spectrometer Dell Industrial PC Monitor Keyboard Mouse Original Thermo WinOE Software Original USB license dongle SERCAL MP-2000 Rare Gas Purifier Connection cables Original documentation Accessories as shown in the pictures Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Manufacturer: OMET S.r.l., Italy Model: MP Advanced Machine Type: Flexographic Plate Mounter Year: 2011 Serial No.: 1487 MPA Working Width: approx. 430 mm Condition: Good used condition FGT Condition Rating: ★★★★★☆☆ 8/10 Availability: Immediately available Why this machine is interesting The OMET MP Advanced is designed for accurate and repeatable mounting of flexographic printing plates. Its dual-camera positioning system supports precise register preparation and can significantly reduce press setup time, start-up waste, and register corrections. This is a particularly attractive solution for narrow-web label and packaging printers looking to improve efficiency through offline plate preparation. Main Configuration • Dual-camera positioning system • Two independently adjustable camera units • Central operator monitor • Digital position displays • Precision linear camera movement • Plate cylinder mounting section • Mechanical cylinder support system • Adjustable positioning components • Robust industrial machine frame • CE marked Suitable Applications Ideal for: • Self-adhesive labels Bedpfxozkawue Afwodg • Paper and film labels • Flexible packaging • Multi-color flexographic printing • Narrow-web converting applications Main Benefits • Accurate plate positioning • Improved register repeatability • Faster job preparation • Reduced press downtime • Lower start-up waste • Offline cylinder preparation • Reduced operator-dependent mounting errors Scope of Supply • OMET MP Advanced plate mounter • Dual-camera system • Central monitor • Digital positioning displays • Cylinder mounting and support section • Standard equipment as installed Additional adapters, sleeves, cylinders, or tooling are subject to separate confirmation.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 580 kg, Precision aluminum circular saw machine VELOX 350 VA-MPS Hydro-pneumatic fully automatic model For saw blades up to 350 mm in diameter, mitre cuts left and right 45° and bevel cuts up to 45° left. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat - 45° left 65mm round, 60mm square, 180x50mm flat - 45° right 115mm round, 100mm square, 150x80mm flat Standard features: • State-of-the-art micro-processor control with multi-function display • Safety package with the following functions: 1. Minimum inlet pressure monitoring 2. Clamping jaw monitoring/material tension • Hydro-pneumatic control of the saw head • Pneumatic double clamping device Bsdpezpxh Nofx Afwjdg • Pneumatic vertical clamping device • Electro-pneumatic material feed unit • Vernier scale for fine length adjustment • Integrated coolant spray device • Connection nozzle for chip extraction system Speed 3600 min-1

Condition: excellent (used), Year of construction: 2003, Bed milling machine, lightly used with approximately 4000 hours. XYZ: 2000 x 1000 x 1000 mm Heidenhain: 530 TNC with HR 410 handwheel Spindle: 2.5 x 2.5 degree double swivel, 4000 RPM, ISO 50 Options: Temperature cooler Coolant chiller Linear scale in Y-axis IKZ 15 bar External cooling with 500 l ATC with SK 50 CNC rotary table with 600 mm diameter ZF gearbox Renishaw MP 10 Chip conveyor (longitudinal) Bjdszt Sv Ujpfx Afwsdg Foot pedal Coolant control cabinet

Condition: used, Very little used Quickstep Anticorro stainless steel reactor. Vessel: - Manufacturer: Quickstep Anticorro - Total/working volume: approx 2897 / 1900 liters - Designed material: Stainless steel AISI 304 - Design type: Clamped dished and hinged top and welded dished bottom - Dimensions: approx 1706 mm diameter x 2471 mm height (3580 mm height with lid open) - Maximum pressure and temperature of the vessel: -1/1 bar at 0 to 100°C - Maximum pressure and temperature of jacket: -1/2,5 bar at 0 to 135°C - Mounted on stainless steel legs. Agitator: - Bottom entry frame agitator MIX Brno model 60 MP 30 - The agitator is designed for mixing creams, gels and ointments with a maximum weight of 1100 kg/m3, maximum viscosity 10000 cP at a temperature up to 100°C and maximum particle size 10 - 80 μm. - Drive through NORD gear drive 7.5 kW, 1460 rpm, 50 Hz - final rpms of the agitator at 50 Hz is 42 rpm. Specifications: Capacity: 1,900 L Type of stainless: AISI 304 Bdsdpfezunptex Afwjg Internal Pressure: -1 bar Internal Temperature: 100°C Jacket Pressure: 2 bar Jacket Temperature: 135°C Legs/Lugs: Legs

Condition: ready for operation (used), Year of construction: 2018, total height: 2,414 mm, total width: 1,110 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 500 mm, overall weight: 800 kg, product length (max.): 1,266 mm, number of axes: 3, This 3-axis Hexagon Tigo SF 05.06.05 was manufactured in 2018. It features a measuring volume of 500 x 580 x 500 mm and a granite measuring plate with high-precision linear ball bearing guideways. The machine supports a maximum workpiece weight of 150 kg and operates without the need for compressed air. If you are looking to get high-quality measurement capabilities, consider the Hexagon Tigo SF 05.06.05 CMM machine we have for sale. Contact us for further details. - Machine Structure: Cantilever design with steel frame construction- Overall Dimensions (X x Y x Z): 1110 x 1266 x 2414 mm- Table Specifications: Granite measuring plate (fixed desk) with M8 x 1.25 threaded inserts, flatness according to DIN 876/II- Guideways: High-precision linear ball bearing guideways- Measuring System: METALLUR scale, resolution 0.039 µm- Pinion/Ram Counterbalance: Steel spring- Max. Workpiece Weight: 150 kg- Compressed Air Requirements: No compressed air required (does not require compressed air, meaning no air compressor is needed!)- Dynamics (3D Speed): Max. 520 mm/s- Dynamics (3D Acceleration): Max. 1750 mm/s²- Scanning Speed: Max. 300 mm/s- Temperature Range for Guaranteed Uncertainty: 15 to 30 °C- Operating Temperature Range: 10 to 45 °C- Relative Humidity: 40% - 70% non-condensing- Temperature Compensation: Multi-sensor temperature compensation technology- Probe / Sensor Systems Compatibility: Equipped with LSP-X1c touch probe system (Max. probe weight: 33g; Max. probe length: Axial 125 mm, Lateral 60 mm); also compatible with TESASTAR-m M8 / TESASTAR-mp- Controller & Operating System: All-in-one system with integrated PC and controller in the base, adjustable arm mount for screen, keyboard, and lightweight jogbox- Advanced Software Modes: Fly2 Mode (trajectory optimization), Eco Mode (automatic shutdown) Bjdjzufkbjpfx Afwedg

Condition: used, Year of construction: 2015, operating hours: 8,557 h, Undercarriage & Track System • Track guard (center) • Slew ring protection • Tracks: Triple-grousers • Base frame, long undercarriage with blade • Blade adjustment • Blade: (approx. 2.08 m) • Blade control with center pressure pump • Protection for travel motors • Underbody protection package Boom, Stick & Linkage • Boom: Heavy-duty design (approx. 4.65 m) • Stick: Heavy-duty design (approx. 2.50 m) • Bucket linkage with lifting function • Cylinders: o Boom cylinder with check valve (BLCV) o Stick cylinder with check valve (SLCV) o Bucket cylinder o R-cylinder Hydraulic System • High-pressure lines (HP) – TCS package • Medium-pressure lines (MP) – Package • Line package for quick coupler (QC) • Hydraulic valve TCS • Tool control package (medium pressure) Bdjdpfxjy Exymo Afwjg • Pilot lines (platform, primary circuit, R-boom TCS, etc.) • Hydraulic accumulator • Fine control for swing mechanism (not included) Cab & Operator Station • Standard platform • Cab with protection package 70/30 (ROPS) • Rain protection for cab windshield • Halogen cab lighting • Air conditioning • Heated air-suspension seat with high backrest • 2-inch safety belt (retractable) • Rearview camera • Exterior mirrors (left + complete set) • Rear window • Radio preparation • Electric refueling pump • Standard starter switch unit • Universal control

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Bdodpjwhp N Defx Afwog