Used Motan Metro Hcg 10 Abscheider for sale (29,832)

Condition: excellent (used), Control unit, heating controller, osmosis control - control box, heating controller, heating control device -Manufacturer: Sauter, equitherm 100 heating controller with accessories, unused, original packaging Lsdpfx Aex Hxcdekyshh -Type: EQJW 41 D 10 -Temperature sensor: EGT 30 B 10 / EGT 31 B 10 -Number: 2x heating controllers available -Price: per piece -Transport dimensions: 210/210/H165 mm -Weight: 2 kg/piece

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Ledpfx Akjzdn H Reyohh Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), mileage: 994,522 km, power: 338 kW (459.55 HP), first registration: 07/2011, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 5,100 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,000 mm, total width: 2,500 mm, total height: 3,600 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 6,500 mm, Year of construction: 2011, Equipment: differential lock, General information Cab: Spacecab, single Registration number: BZ-HT-71 Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Lhjdpfx Akoy Rtrujyoh Drivetrain Make of engine: DAF Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/65 R 22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Suspension: air suspension Rear axle 2: Tyre size: 315/70 R22.5; Double wheels; Max. axle load: 7500 kg; Steering; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Suspension: air suspension Weights Empty weight: 11.610 kg Carrying capacity: 16.388 kg GVW: 28.000 kg Functional Tipper: Back Condition Technical condition: very good Visual appearance: very good Number of keys: 2 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, Year of construction: 2014, fuel type: electric, Lifting capacity: 200 kg Lhjdszflbbopfx Akyoh Please contact Gebrauchtgeräte Center for more information

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale is a high-quality Renner RS Pro 22 screw compressor, including a refrigerant dryer. The system is of German quality manufacture and is ideally suited for craft businesses, carpentry shops, metal construction, industry, and workshops with higher compressed air requirements. The additional refrigerant dryer ensures dry and clean compressed air, which extends the service life of machines and pneumatic tools. Technical data: Lhedpezfi Dtjfx Akysh Manufacturer: Renner GmbH Model: RS Pro 22 Year of manufacture: 2019 Type: 3440 Motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Phases: 3~ Delivery rate: 3,440 l/min Max. operating pressure: 10 bar Made in Germany CE version Equipment: Screw compressor Integrated refrigerant dryer Soundproof enclosure Industrial version Three-phase connection 400 V Maintenance-friendly design High air output Suitable for continuous operation Application areas: Carpentry Joinery Metal construction Automotive workshops Industry Craft businesses Scope of delivery: Renner RS Pro 22 screw compressor Refrigerant dryer Accessories as per scope of delivery Condition: Used - but with few operating hours - see photo Oil change performed New drive belts Functional Signs of wear and tear consistent with age and use Ready for immediate use The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for processed wood: diameter 160mm - Rotor working width: 980mm Lhjdpjy Nyx Eofx Akysh - Main motor: 18.5kW - Number of knives: 24 pcs - Knife size: 30x30mm - Screen: 20mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approx. 2500kg ADVANTAGES – Made in Germany – Auto-reverse – Feed drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,450 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: reconditioned (used), functionality: fully functional, Flat- or glue joint scraping unit Used unit, not reconditioned, without warranty - For removing of glue residuals or leavings from the panel surface in the area of the glue joint. Specification: - consisting of one top and one bottom unit, individually adjustable. - top unit synchronized with top pressure in vertical direction - version with 3 small tracer rollers, individually adjustable, for smooth passage at front and rear edge of panel. IMPORTANT ANNOTATION: version with pneumatic cylinders for lateral cut-in/out controlled by selection of the individual unit in the main control is currently not available. But it is possible to retrofit this feature. Please ask for our quote. Installation and set-up of the unit at your machine is also possible. Lhjdpjtywuksfx Akyoh

Condition: used, Year of construction: 2003, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 1663, arm reach: 15,300 mm, load capacity: 2,000 kg, track width: 10,000 mm, Used gantry crane 10 meter track gauge Crane type: OBX IV 15.3 meters Lifting capacity: 2,000 kg at 15 meters without grab Grab: included Crane arrangement: central Cab side: left Power supply: conductor rail Power: 45 kW !! Sale on behalf of customer !! Lhodpfxsyyldzo Akyjh Available from summer 2026

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, load capacity: 1,000 kg, lifting height: 240,000 mm, fuel type: electric, mast type: other, construction height: 210,000 mm, gearing type: mechanical, fork length: 115,000 mm, STILL & WAGNER – electric forklift, lifting height 2400 mm Lhodpfx Akozfpqyoyeh New charger, 12/24 V.

Condition: used, maximum load weight: 34,120 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 88 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-axle STAS Walking Floor Semi-Trailer, 88 cbm First registration 07/2024, from first owner Mileage only 69,324 km Internal dimensions (L x W x H) 13,513 x 2,475 x 2,536 / 2,752 mm >>> Saddle height 1,200 to 1,250 mm Axle distance 1,310 mm Unladen weight 7,880 kg Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO Trailer EBS with anti-roll system RSS WABCO Smartboard with axle load indicator >>> 1st and 3rd axles are lift axles >>> WABCO OptiTurn steering system to reduce the turning radius Air tank made of aluminum Lhodpfey S Nqcox Akyoh Tire size 6x 385/65 R 22.5 Crank-operated saddle JOST full-load Lighting ASPÖCK full LED 4 x LED work lights Toolbox on the rear left Side walls with profile overlaps, completely welded on the inside CARGOFLOOR sliding floor with 21 planks, material thickness 10 mm, ribbed >>> with floor reinforcement for forklifts and full load, sliding bearings Control with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel Side rails 2 pieces, reinforced waste disposal version Roof tarpaulin, reinforced version >>> Rear crossbar swivels, can be operated from the ground with grain slide in the left door leaf RENTING is the new BUYING, and it is immediately available with us, even in FULL-SERVICE LEASING.

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, number of seats: 30, gearing type: automatic, emission class: euro6, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, New vehicle without registration, available for immediate delivery with automatic transmission, double glazing, and auxiliary heater! 8 x facelift model The ideal school bus or small group minibus for those on a limited budget. Built for Germany with double glazing, auxiliary heater, and a 24-month warranty (optionally extendable). 29 sleeper seats with folding tables ----General vehicle data: * Length: 7,168 mm * Width: 2,262 mm * Height: 3,352 mm * Wheelbase: 3,350 mm * Front/rear overhang: 1,613 mm / 2,205 mm * Turning circle diameter: 12,200 mm * Passenger capacity: 29 + 1 * Permissible total weight: 8,160 kg Lhjdszfxp Sepfx Akyeh * Diesel tank capacity: 160 l * AdBlue tank: 12 l Drivetrain: * Type: E6 MFTBC 4P10-HAT4 (Mitsubishi) * 4-cylinder in-line engine * Automatic transmission * Emission standard Euro 6e * Displacement: 2,998 cm³ * Power: 110 kW / 150 hp at 3,500 rpm * Max. torque: 370 Nm at 1,320 rpm * Engine compartment fire suppression system Braking system and safety features: * Disc brakes * EBS (Electronic Braking System) * ESP (Electronic Stability Program) * ABS (Anti-lock Braking System) * ASR (Traction Control) * AEBS (Advanced Emergency Braking System) * LDWS (Lane Departure Warning System) Climate control / heating / ventilation: * Safkar roof-mounted air conditioning * Convector heaters on side panels * 1 roof hatch, manually operated * Additional Eberspächer heating unit Doors: * Door 1: single-leaf at front * Door 2: single-leaf at rear * Electrical control Accessories: * Fire extinguisher 1 x 6 kg * First aid kit * Emergency hammer Our company has been in the market for 35 years. You can inspect and test drive the vehicles with us. You will be welcomed at our operational premises—not in some parking lot, and our business address is not a mailbox at an apartment building. Those mailboxes usually disappear after a few months.

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Year of construction: 2012, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Lhjdpfx Aezdb Trokyoh Weights Empty weight: 6.880 kg Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Make of bodywork: Groenewegen Jumbo Plywood Box Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 12/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), Here, we offer a handling device from ZASCHESitec. This device was used in the manufacturing of instrument panels. It consists of the following components: Ljdpfozdim Hox Akyehh KBK - FPM 10 - 7.0 x 5.0 Traveling carriage - LWK 762 x 762 Lifting module - Z-L6 - 80/1280 - 1486 Load handling device - GP10 Load capacity: 10 kg Scope of delivery: (ZASCHESitec handling device, technical documentation) Condition: used We would be happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: used, Year of construction: 2016, fuel type: electric, Lifting capacity: 200 kg Please contact Gebrauchtgeräte Center for more information Lhsdpozfk Akjfx Akyjh

Condition: used, Year of construction: 2016, fuel type: diesel, Lifting capacity: 565 kg Lhsdpfx Aszfklxskyjh Please contact Gebrauchtgeräte Center for more information

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible. Lhsdpfx Akspy Dxreyeh

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face Lodpfx Akedz Spwoyshh - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: used, Year of construction: 2014, fuel type: electric, Lifting capacity: 200 kg Please contact Gebrauchtgeräte Center for more information Lhjdpfozflk Ajx Akyoh

Condition: good (used), Year of construction: 2006, operating hours: 104 h, machine/vehicle number: 17139, load capacity: 200 kg, overall weight: 2,760 kg, construction height: 2,000 mm, product width (max.): 1,000 mm, working height: 10,000 mm, enginetype: Electric, manufacturer: Haulotte Lhsdpfx Akszff Twsysh

Condition: good (used), Year of construction: 2020, operating hours: 246 h, machine/vehicle number: 17042, load capacity: 200 kg, overall weight: 2,770 kg, construction height: 1,990 mm, product width (max.): 998 mm, working height: 10,000 mm, enginetype: Electric, manufacturer: Airo Lhsdsy Hnkkspfx Akyoh

Condition: used, machine/vehicle number: 16771, Year of construction: 2017, operating hours: 912 h, load capacity: 1,000 kg, lifting height: 1,000 mm, construction height: 1,620 mm, fork length: 1,200 mm, overall weight: 1,644 kg, enginetype: Electric, manufacturer: Still Lhjdpfx Aex Rphlekyjh

Condition: used, machine/vehicle number: Bongard 10.16, functionality: fully functional, -10 outlets -This oven is a Bongard 10.16 deck oven, a true classic for artisanal bakeries -Type: deck oven with ring-shaped tubes -Energy: gas or oil -Baking surface: 10 m² -Useful height per deck: 200 mm -Number of decks: 5 -Doors: 600 mm, 2 doors per deck -Controls: panel on the right Lhedjy Duzwepfx Akyoh -Steam: high-performance steam generator heated by exhaust gases -Voltage: 400V

Condition: used, -Dimensions: 1870x2430x2300 mm -Panel size: 602x1840 mm -Number of tiers: 5 -Year: 2005 -Serial number: 10619802 -10 outlets Lhedpjy H D Ncsfx Akyoh -Voltage: 400V -Power: 45.6 kW

Condition: used, Electric oven with 8-level proofer Dimensions without stand (WxDxH): 780 x 1030 x 2100 mm Dimensions with stand (WxDxH): 780 x 1030 x 2400 mm Ljdeyhfubopfx Akyohh Oven -Model: RS10A20-1 -10 levels -Tray size: 400x600 mm -Power: 18.6 kW -Voltage: 3x400V + N + PE / 50Hz -Serial number: 10NL C0143 Proofer RE16A-S -8 levels -Serial number: ETNL C0093 -Power: 1.2 kW -Voltage: 1x240V+PE / 50Hz -Refurbished equipment: Equipment is prepared upon order, pick-up and return times are agreed at that moment (price after refurbishment - please request a quote)

Condition: used, machine/vehicle number: 13983, Year of construction: 2019, operating hours: 2,208 h, load capacity: 1,500 kg, lifting height: 3,000 mm, load center: 500 mm, construction height: 2,050 mm, fork length: 1,150 mm, front tire size: 18x7-8, rear tire size: 140/55-9, overall weight: 3,097 kg, enginetype: Electric, manufacturer: Jungheinrich Lhedew R Ai Ispfx Akysh