Used Mubea Manually Hole Punch for sale (17,109)

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run Lodpfei Db Ibex Akujhg 6 = reverse run

Condition: used, functionality: fully functional, machine/vehicle number: F21172J04973, Year of construction: 2018, operating hours: 825 h, load capacity: 1,200 kg, lifting height: 2,924 mm, free lift: 1,462 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,940 mm, battery capacity: 225 Ah, battery voltage: 24 V, fork length: 1,150 mm, fork width: 560 mm, The LINDE electric high-lift pallet truck, model L12 i, series 1172-01, is in good condition and fully functional. Lhedpey S Aw Njfx Akujg For sale to businesses only, with exclusion of warranty.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, type of input current: three-phase, Manual Lisec butyl extruder LBH-25V, year 1989, working order. For butyl application of spacer widths from 6-24 mm butyl storage cylinder 2 x 7,5 kg Lhodpfey T Ipmjx Akujg The machine will be available end of May 2026

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm Lhodpsw I Unwofx Akuog 3 hold-down devices 1 foot switch Availability: short term Location: Röllbach

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 4867, Pressta Eisele Stamping Machine HE 40 S Price: 2,000 Euros Lhedpfxjy Tizke Akuog

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Slot drilling machine, like new, hardly used. Lhedpfx Aoy Tk Ufskujg

Condition: used, functionality: fully functional, machine/vehicle number: 0171793397124, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender HIW 550/510 Lsdsy Tivuepfx Akujhg Price negotiable

Condition: used, functionality: fully functional, machine/vehicle number: 0159689206365, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender KLH 500/610 Price negotiable. Ledpfx Akey Tit Tsushg

Condition: used, functionality: fully functional, machine/vehicle number: 1028789976479, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender Price negotiable Lhjdpfx Aey Tip Iokujg

Condition: used, functionality: fully functional, machine/vehicle number: 05073 81 767 830, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender KL 1300 Price: 3000 Euros Lhsdey Tim Hjpfx Akueg

Condition: used, functionality: fully functional, machine/vehicle number: 0167694409306, throat depth: 760 mm, Equipment: centralized greasing system, used Mubea stamping machine Ljdpfx Ajy Ticnokuohg fully functional price negotiable

Year of construction: 1991, condition: repair required (used), functionality: limited functionality, We are offering this Schön + Sandt cart beam punching machine, model 565, manufactured in 1991, which requires repair. The cart beam moves. Lodsy S Tf Ropfx Akujhg Pressure build-up for the punching process is currently not functioning. The operating manual and wiring diagrams are available. Manufacturer: Schön + Sandt Type/Model: Cart beam punching machine 565 Year of manufacture: 1991 The machine can be inspected while powered on, subject to prior arrangement. If you have any questions or require further information, please send us a message or call us. Delivery terms: EXW, Incoterms 2020, Regensburg Our general terms and conditions apply. Furthermore, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear and tear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, machine/vehicle number: 26558, Year of construction: 2019, operating hours: 175 h, load capacity: 1,000 kg, lifting height: 2,500 mm, fuel type: electric, mast type: simplex, construction height: 1,670 mm, Equipment details: Year of manufacture: 2019 Load capacity: 1000 kg Lhodoy R Uqxepfx Akusg Lift height: 2500 mm Recorded operating hours: 175 h Mast type: Standard Mast height: 1670 mm Dimensions (L/W/H): 1660 / 800 / 1280 mm Operating weight: 599 kg ---- Features: * DGS made of Plexiglas ---- Additional equipment information: ---- The stated operating hours are generally based on the hour meter reading. We are happy to offer you suitable transport upon request. An additional 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Also available for rent! We are happy to purchase your OLD machine as well. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Prior sale and errors for this offer expressly reserved. In dealer transactions, the equipment is sold as is, not reconditioned. All information provided without guarantee; errors and changes reserved.

Condition: used, machine/vehicle number: 26557, Year of construction: 2012, operating hours: 2,139 h, load capacity: 1,400 kg, lifting height: 4,716 mm, free lift: 1,529 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, .: 26557 Equipment Details: Lhodpfxoy R Uqrj Akujg Year of manufacture: 2012 Load capacity: 1400 kg Lifting height: 4716 mm Reading operating hours: 2139 h Free lift: 1529 mm Mast type: Triplex Mast height: 2065 mm Length/Width/Height: 1950 / 800 / 1250 mm Operating weight: 1379 kg Battery from: 2022 ---- Features: * Initial lift * Full free lift * Plexiglass overhead guard (DGS) ---- Additional Equipment Information: ---- Operating hours stated are generally those read from the meter. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers are available immediately. Of course, also for rent! We will also gladly buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English Subject to prior sale and errors in this offer. In wholesale trades, the machine is sold in its current condition, not refurbished. All information is provided without guarantee, errors and changes excepted.

Condition: used, machine/vehicle number: 26559, Year of construction: 2020, operating hours: 704 h, load capacity: 1,000 kg, lifting height: 2,422 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 1,892 mm, Device details: Year of manufacture: 2020 Load capacity: 1000 kg Lift height: 2422 mm Read operating hours: 704 h Free lift: 150 mm Mast type: standard Mast height: 1892 mm Length/Width/Height: 1745 / 796 / 1280 mm Operating weight: 640 kg ---- Features: * Plexiglass DGS ---- Further device information: ---- The operating hours indicated are always the hours read from the display. We are happy to offer suitable transport for you. Lhodpfoy R Uqljx Akujg An additional 250–300 forklifts, attachments, and sweepers are immediately available. Of course, rentals are also possible! We are happy to buy your OLD equipment. Do you have questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Interim sale and errors in this offer are expressly reserved. For dealer transactions, the device is sold as is, not refurbished. All information given without guarantee—errors and changes reserved.

Condition: used, machine/vehicle number: 26560, Year of construction: 2020, operating hours: 670 h, load capacity: 1,000 kg, lifting height: 2,422 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 1,892 mm, Device Details: Year of manufacture: 2020 Load capacity: 1,000 kg Lift height: 2,422 mm Indicated operating hours: 670 h Free lift: 150 mm Mast type: Standard Mast height: 1,892 mm Length/Width/Height: 1,745 / 796 / 1,280 mm Operating weight: 640 kg Battery from: 2020 ---- Equipment: * DGS made of Plexiglas ---- Lhodpfx Akoy R Up Usuog Further device information: ---- Operating hours are generally read-off values. We would be happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Rental options available too! We are also happy to buy your OLD equipment. Any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English Subject to prior sale and errors in this offer. For trade customers, the device is sold in its current condition, not refurbished. All information provided without guarantee; errors and changes reserved.

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm Lhodpfxoyilgds Akusg B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: LVD STRIPPIT Type: Global 20 FANUC Control: FANUC 180i-P Year of manufacture: 2006 Thick turret WILSON tool system Under power inspection possible Large package tooling WILSON Auto indexing rotation tools included Laser safety guids included Specifications Metric US standard Table load 150 Working area X axis 2500 mm Lhodpsv Ic Tqefx Akujg Working area Y axis 1250 mm Working area X axis with takeover 5000 mm Punching force 20 T Max. sheet thickness 6 mm Turret positions 30 Auto index. positions 4 Positioning speed X and Y axis 4500 mm/min. Turret change speed 900 rpm Dimensions (estimate) Length 6400 mm Width 5600 mm Height 2445 mm Weight 16500 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Lodpfx Ajx Tp Ahskuohg Type: UTB Year: 2005

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Lhsdsvn Sv Ujpfx Akujg Height: 4300mm Weight: 31000kg

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Lhsdpfxjwyup To Akuog Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg

Condition: new, Year of construction: 2022, pressure 55 t stroke 37 Min./20 mm throat 500 mm Lhsdpswp Tcqsfx Akusg stroke max. 60 mm work height max. 1060 mm total power requirement 5 kW

Condition: like new (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, overall weight: 850 kg, type of input current: three-phase, Manual Lisec 2k sealing machine for Polisulfide, year 1998, Lhedpfx Ajy Tl R Ijkusg will be technically and optically completely overhauled prior delivery (will look and work as new) The overhauled machine will be available from end of May/middle of June and can be seen in our overhaul warehouse in Oroahsza/Hungary. The machine is now running on PS but can be modified to Silicone on demand as an option. Photos will be available after overhaul has been finished.

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Lhedsudbzyjpfx Akujg Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, Hydraulic cutting machine MINI ATOM SE 8 Pressing force: 8 tons Table dimensions: 600mm x 300mm Ljdjy Tw Ncspfx Akuehg Hammer dimensions: 300mm Maximum stroke: 90mm Motor power: 0.9kW Weight: 430kg Overall machine dimensions: 600mm x 690mm x 1330mm Two-hand operation for guaranteed work safety Simple and intuitive operation Machine in very good technical condition Option for courier delivery to the customer More information: +48 662 448 730