Used Mubea Section Shear - Combined for sale (7,932)

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable Pedpfezl A Rajx Airegt - Angle stop right + left - Sliding carriage

Condition: good (used), functionality: fully functional, working width: 2,050 mm, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, back gauge adjustment: motor-driven, power: 9 kW (12.24 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 8,500 kg, total length: 2,600 mm, Equipment: angle stop, emergency stop, foot remote control, Well-maintained Promecam GH1020 shear. Cutting length 2050 mm and 10 mm steel capacity! Can be inspected by prior arrangement. Pedpfjzvhktjx Airegt

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. guillotine shear LVD HST - C 40/6 Manufacturer: LVD Pgsdjzty E Dopfx Airst Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Maximum length 4050 mm Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg

Condition: repair required (used), Year of construction: 2024, For sale is a used Hammer planer machine A3-31 with a planing/thicknessing width of 310 mm. The machine is in like-new condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Pgsdpfx Ajzuxwhoirot Technical data: - Planing/thicknessing width 310 mm - Silent Power planing shaft - Planing table, dual folding - Planing fence, swiveling 90-45° - Thickness setting 4-225 mm - 4 HP (3 kW) motor, 400 volts - Machine no. 52.09.021.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer, thicknesser, planing machine, surfacing, thicknessing Reference: R-AT18K

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, control type: CNC control, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: DNC 10, sheet thickness (max.): 5 mm, workpiece diameter (max.): 4,080 mm, back gauge adjustment: CNC-controlled, number of support arms: 4, Equipment: CE marking, emergency stop, finger protection, foot remote control, Used very clean, high quality popular VR model 4metre x 5mm Edwards Pearson hydraulic Guillotine cutting machine c/w rear non magnetic rear sheet support and rear powered conveyor for sale Edwards Pearson VR 4080 Hydraulic Guillotine Cutting Machine  Equipment Listing: Edwards Pearson VR 4080 Hydraulic Guillotine Overview Available for immediate purchase is a highly sought-after, exceptionally clean, and premium-grade Edwards Pearson VR 4080 Hydraulic Guillotine. This high-performance sheet metal cutting machine features a 4-metre cutting length capacity and is equipped with premium handling upgrades, including a powered rear conveyor and non-magnetic sheet support to maintain material integrity. The machine operates on high-quality Grade 46 hydraulic oil, is fully operational, and can be demonstrated under power at our facility using your own steel stock prior to final purchase. Technical Specifications Manufacturer: Edwards Pearson Model: VR 5 x 4080 Type: Variable Rake Hydraulic Guillotine Cutting Capacity: 4000 mm x 5 mm (4m x 5mm) Control System: Cybelec DNC 10 CNC Controller Fluid Requirement: Grade 46 Hydraulic Oil  Podpfxezuy Uho Airogt Key Features & Included Accessories Cybelec DNC 10 Control: Popular, user-friendly CNC interface for precise backgauge positioning and program management. Front-Operated Powered Backgauge: Allows the operator to efficiently adjust dimensions from the front of the machine. Rear Material Handling: Equipped with a rear non-magnetic sheet support system paired with a powered rear conveyor to safely clear cut blanks. Adjustable Cutting Parameters: Features rapid blade gap adjustment and a variable rake angle to eliminate distortion on thinner gauges. Premium Condition: Both the chassis and the cutting blades are in excellent condition.  Front support arms: 4metre front support arm

Condition: good (used), Year of construction: 2002, machine/vehicle number: 69584, Offer 26220 Technical Data: - Cutting length 3050 mm - Cutting thickness at 400 N/mm² tensile strength 16 mm - Cutting thickness at 400 N/mm² tensile strength up to 1000 mm length 18 mm - Cutting angle 0.5 - 3 ° - Number of sheet metal clamps 18 pcs - Stroke rate 10 - 23 min - Motorized back gauge up to 1000 mm - Rear guard with light curtain Pedpfxjzuzrbo Airjgt - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet metal thickness in mm - Automatic cutting angle adjustment based on sheet metal thickness - Cutting length limitation - Automatic positioning of the back gauge (8 programs – 80 steps) with - Digital display and automatic retraction of the back gauge - Drive 400 V / 22 kW - E - Foot pedal - Space requirement without support arms approx. W 4500 x H 2250 x D 2200 mm - Weight approx. 14500 kg

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94102, Offer 26181 Technical Data: - max. working width 2540 mm - max. cutting capacity St 40 10 mm - Cutting angle adjustable, motorized 0.5 - 3 ° - Manual cutting gap adjustment Pgedpfxjzruf Ns Airjt - Number of hydraulic clamping cylinders 15 pcs - Motorized rear stop with positioning control 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 7500 kg - Including: - Electronic foot switch - Cutting line illumination

Condition: good (used), Year of construction: 2011, Approx. 84 bays of industrial shelving, Meta, shelves 1.25m wide, 0.60m deep, frame height 2.50m - used: Price ex works: €6,500 (net), disassembled, packed and loaded. Manufacturer: Meta Type: Slot-in system Year of manufacture: 2011 Approx. 4 shelves per bay Dimensions per shelf: approx. 1,250mm x 600mm Frame height approx.: 2.50m Load capacity per shelf: 230kg Bay load capacity: 1,030kg Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area Note: The photo shows more shelves per bay than are actually available! Pgedpfx Aiezpf D Dorjt

Condition: good (used), Year of construction: 2012, Approx. 36 bays of Hofe shelving systems, shelving units 1.30m wide, 0.60m deep, frame height 3m - used -: Price ex-works: €3,500 (net), disassembled, packaged, and loaded. Manufacturer: Hofe Type: Orion Plus Year of manufacture: 2012 / 2013 Approx. 6 shelves per bay Dimensions per shelf: approx. 1.30m x 60cm Frame height approx.: 2.50m Load capacity per shelf: 190kg Pgsdpozpf Euefx Airst Bay load: 1,700kg Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 6.088.177.254, controller model: Durma DT-7, working width: 3,100 mm, sheet thickness (max.): 13 mm, overall weight: 11,800 kg, TECHNICAL DETAILS Max. sheet thickness: 13 mm Max. working width: 3,100 mm Overhang: 50 mm Design: Swing-beam Angle adjustment: Manual Shear gap adjustment: Motorized Back gauge type: Electric Back gauge depth: 1,000 mm MACHINE DETAILS GENERAL Control system: CNC Controller: Durma DT-7 Drive type: Hydraulic Power: 30 kW Dimensions & Weight Pgsdpjzuwvvsfx Airet Dimensions (L x W x H): 4,200 x 2,350 x 2,350 mm Weight: 11,800 kg Transport packages: 1 unit EQUIPMENT CE marking Finger guard: Fixed with fold-up guard Table type: Ball-bearing table

Condition: good (used), Year of construction: 1988, machine/vehicle number: 802107, Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable, motorized 0.5 - 3° - Cutting gap adjustment by hand - Number of hydraulic clamping devices 18 pcs - Motorized rear stop 10 - 750 mm - Front angle stop + support arms - Number of strokes per minute, depending on cutting angle and cutting length 9 - 17 - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm Pjdpfozw Di Iox Airogt - Space requirement including rear stop, excluding front support arms approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - including: - Foot switch - Cutting line illumination

Condition: good (used), Year of construction: 1987, machine/vehicle number: A20072, Offer 26300 Pgedpfxszw Dt Hs Airot Technical data: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable, motorized 0.5 - 3° - Manual cutting gap adjustment - Number of hydraulic clamping bars 18 pcs - Motorized rear stop 10 - 1000 mm - Front angle stop - Number of strokes per minute, depending on cutting angle and cutting length 7 - 17 - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - Includes: - Foot switch - Cutting line illumination

Condition: used, functionality: fully functional, Year of construction: 1985, operating hours: 27,150 h, machine/vehicle number: 2723007, control type: NC control, actuation type: hydraulic, working width: 3,000 mm, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, total length: 4,000 mm, total width: 2,500 mm, total height: 1,700 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, type plate available, This machine is still in use in the factory during the manufacturing process and is ready for demonstration immediately. Pedpfx Aszud Ekoiregt

Condition: used, mileage: 807,000 km, power: 338 kW (459.55 HP), first registration: 07/2005, fuel type: diesel, axle configuration: 6x4, wheelbase: 4,580 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, total length: 81,000 mm, total width: 2,550 mm, Year of construction: 2005, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, = Additional Options and Accessories = - Leaf spring suspension - Power take-off (PTO) - Radio/CD player - Sleeper cab - Sun visor = Additional Information = Front axle: Steerable Number of cylinders: 6 Engine displacement: 12,130 cc Unladen weight: 14,080 kg Pgsdpfx Aozvclxoirjt Payload: 11,920 kg Gross vehicle weight (GVW): 26,000 kg Crane: Palfinger / Epsilon SRX 47, year of manufacture 2004 Damage: None

Condition: good (used), Year of construction: 1967, Kupfermuller Lignum double-sided thicknesser Pjdpstzcmtjfx Airogt Kupfermuller Lignum double-sided thicknesser. Stable construction. The machine has a planing width of 630 mm and 4-knife shafts. The machine has a processing accuracy of 0.1 mm. The planing height is 180 mm. The machine has steel rollers mounted in a table with its own drive, that is, active split rollers. The machine is therefore ideal for planing wet and dry wood for gluing. Net price. VAT invoice, machine with electrical cable covers and stop buttons on both sides, ready to go. Stable cast iron construction. Weight of about 3 tons. The machine does not require any financial outlay.

Condition: good (used), functionality: fully functional, *Description* Pjdpfx Ajzt Swleirsgt Hydraulic shear and punch press *GEKA model HYD 50-S* No. 3497. Versatile 5-station machine, ideal for cutting and punching steel profiles. Robust machine, visible and in working order. *Technical Specifications* - *Brand / Model*: GEKA HYDROCROP HYD 50-S - *Machine No.*: 3497 - *Punching force*: 50 tons - *Bending force*: 50 tons *Capacities with standard blades* - *Angle iron*: 120 x 120 x 10 mm at 90° - *Flat bar*: 300 x 15 mm - *Round bar*: Ø 40 mm - *Square bar*: 40 x 40 mm - *Punching*: Ø28 x 13 mm thickness *Special Equipment* - *Bending*: 200 x 15 mm - *Notching*: 250 x 250 x 6 mm - *Shear for UPN/UPE*: 100 mm - *Shear for IPN/IPE*: 100 mm *Condition* Complete machine with stations: punching, flat/angle/round/square shearing, bending, notching. Sold with punches. Heavy weight, mounted on a steel base.

Condition: new, angular steel - leg outwards -- mm double T-iron on the x-axis -- mm U-iron on the x-axis -- mm 50 mm 150 mm throat 120 mm total power requirement 1,5 kW weight of the machine ca. 0,36 t dimensions of the machine ca. 1,1 x 0,8 x 1,4 m Exhibition machine NEW, year of construction: 2021 Pjdpfx Aou Rt Syjirjgt The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table Pgjdpfx Aoyuzcuoiret - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: good (used), Year of construction: 2005, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition (!!) Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system "SP 9" Pgodezr Rqnepfx Airot * in like-new condition * backgauge pre-selection positioning * digital display of actual value * electro-hydraulic cutting angle adjustment with digital display * emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual

Condition: used, Year of construction: 2019, sheet width 6080 mm plate thickness 6.0 mm rear stop 1000 mm Podpfezvq Etex Airsgt cutting angle 0.5 - 2.0 ° down holder 29 Stk no. of strokes ca. 10 Hub/min total power requirement 22.0 kW dimensions of the machine ca. 7300 x 2150 x 2750 mm weight 25500 kg Current list price: approx. 150.000 euros Features: - Electro-hydraulic, slide-guided sheet metal shear - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Electrically driven backgauge with ball screws - Manual central lubrication - Cut line illumination - Ball bearings in the table - Fold-up finger guard, 1.000 mm - Side stop with T-slots, tilting stop, and scale - 5 support arms with T-slots - Photoelectric sensors on the rear of the machine - 1 freely movable foot switch Includes optional equipment: - Pneumatic sheet metal holding device

Condition: used, Year of construction: 1997, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control DELEM DAC 360 oil volume 120 ltr. engine output 9.5 kW weight 7000 kg. range L-W-H 3950 x 1950 x 1680 mm well-maintained condition (!!) equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear Psdpfxey I Dbbe Airogt - DELEM CNC control unit type DAC 360 * front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Approx. length: 2300 mm Approx. width/depth: 1100 mm Approx. weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Tilting range of jointer fence: 90 - 45° Thicknessing extraction port diameter: 120 mm Main motor: 7 kW Required space, length: 2300 mm Required space, width/depth: 1610 mm Required space explanation: Dimensions include maximum travel distances or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Working area explanation: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Max. cutting depth: 8 mm Connection voltage: 400 V Phases: 3~ Current type: AC Pgedew I U Nuepfx Airst Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: Short-term Location: Solingen

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Pgsdpsxtgz Ejfx Airst Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: excellent (used), functionality: fully functional, Cutting Length 6100mm Cutting Capacity 25mm Angle 0.5-2.5 Strokes per minute 3-5. Pgedoygd Auopfx Airot Number of hold downs 36 Blade gap 0.005-3.00 Throat Depth 500mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kaltenbach KPS 506 CNC Flat Bar / Angle Punching / Shearing Line – Year 2007. 500mm Capacity Flat Bar. 160mm x 160mm Angle. 3 head Punch. Horizontal punch. 6 metres Gripper feed. Mitre Shearing. Pgedpfszcqnijx Airjt