Used Ohler Automatic Circular Saw for sale (23,751)

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 500 mm, Equipment: documentation/manual, Technical data and cutting diagram can be downloaded on the right. 730 mm per stroke, limited to 3 repetitions. Saw blades Ø 500 x 4.4 x 30 mm. Cutting only at 90° angle. Maximum cutting length with 3 repetitions: 2180 mm. Gsdpfx Aley D Sywexoit

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 Gsdpoy Dtpmofx Alxsit ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: good (used), Year of construction: 2004, sawing machine for non-ferrous metals transmission range up to Ø60 mm respectively 70 x 70 mm cut-off length up to 250 mm engine power: 3 kW rotation speed: 180 - 4800 rpm sawing blade up to 250 mm pneumatic voltage flow cooler control system renewed: 2011 ESTA oilmistseperator type AS 600, year of construction: 2006 We sell only to companies with registered office in the EU. Dispatch type: ex works Payment term: Prepayment Godpfx Asfkh E Aelxsit

Condition: used, Longitudinal circular saw Longitudinal panel saw Cross-cut / longitudinal circular saw, year 1999 operates from below for lengths up to 4.7 m Godpfx Aloq E Ivtjxsit material thickness up to 110 mm also suitable as a travelling saw behind a production line INFO!! For such a new Flender circular saw flat motor 10 kW, you pay 4,700 EUR which is more than you pay for the entire machine at company jöma.

Condition: good (used), Year of construction: 2003, saw blade diameter: 450 mm, Nice under-table crosscut saw with two-hand operation and foot switch. Saw blade diameter 450 mm, max. cutting height 16 cm, with 2 roller conveyors. Gedewx R Ivjpfx Alxoit

Condition: good (used), Year of construction: 2008, functionality: fully functional, power: 18 kW (24.47 HP), Still a very presentable longitudinal saw with a powerful 18.5 kW saw motor max. cutting length: 6.2 m max. cutting width: 0.45 m Gisdpfx Aloy D Drxoxot max. cutting height: 0.17 m with hold-down device with digital size display Ready for demonstration in the workshop.

Condition: good (used), Year of construction: 2000, Sizing saw with scoring unit 3 m sliding carriage Digital displays Width adjustment is no longer motorized Gedpfx Ajtw Hd Aelxoit Height adjustment converted to foot hydraulics Clamping beam not included in the price

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm Gjdjxiu Dtepfx Alxoit max. cutting height 170 mm motor 11 kW

Condition: excellent (used), functionality: fully functional, AUTOMATIC MULTI RIP SAW model SCM M3 second hand machine carpet with integral cast iron elements in excellent condition. general condition of the machine: excellent Gjdpfx Alsy Ev Izsxjit Technical details : max.height of cut mm.120 max.working width mm.300 minimum length of cut mm.250 max.diameter of blades mm.350 min.diameter of blades mm.200 main motor power Hp 35 feed motor power Hp 1,5 arbor speed rpm 4200 variable carpet advancement speed. from 6 to 45 m/min. net weight kgs.2200 volt. 380/50

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation Giedpfsxb Edzox Alxot

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, saw blade diameter: 350 mm, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, cutting length (max.): 3,200 mm, intake manifold diameter: 120 mm, TECHNICAL DETAILS Max. cutting length: 3,200 mm Saw blade diameter min.: 300 mm Saw blade diameter max.: 350 mm Saw blade bore diameter: 30 mm Dust extraction nozzle diameter: 120 mm Max. spindle speed: 4,000 rpm (automatically adjustable) MACHINE DETAILS Voltage: 400 V Power consumption: 18.5 A Fuse: 25 A Gsdsy Ai U Aopfx Alxeit Transport packages: 2

Condition: used, Year of construction: 2011, functionality: fully functional, power: 3.73 kW (5.07 HP), cutting height (max.): 440 mm, cutting width (max.): 600 mm, pivoting range: 60 °, total height: 1,700 mm, total length: 2,900 mm, total width: 1,300 mm, overall weight: 1,320 kg, Equipment: CE marking, We offer this used semi-automatic band saw TOP-PORĘBA BMT460DSA, year of manufacture 2011. Motor power: 5 HP Cutting diameter at 90° (round cross-section): 460 mm Cutting dimensions at 90° (square): 460 x 460 mm Cutting dimensions at 90° (rectangle): 440 x 600 mm Cutting diameter at 45° (round cross-section): 445 mm Cutting dimensions at 45° (square): 445 x 445 mm Cutting diameter at 60° (round cross-section): 295 mm Gijdpfoyv Ai Hox Alxot Cutting dimensions at 60° (square): 295 x 295 mm Blade dimensions: 41 x 1.3 x 5330 mm Machine weight: 1320 kg If you have any questions or require additional information, please send us a message or contact us by email.

Condition: good (used), Year of construction: 2007, machine/vehicle number: 609086, Offer 26074 Gijdpfx Asyn Ikrelxst Hydraulically-operated, double-column-guided horizontal band saw automatic machine Technical data: - Cutting capacity at 90° round: 260 mm - Cutting capacity flat: 260 x 260 mm - Maximum single stroke of material feed: 600 mm - Maximum cut length in multiple strokes: mm (not specified) - Saw band dimensions approx.: 4100 x 32 x 1.2 mm - Infinitely variable cutting speed: 12 - 100 m/min - Infinitely adjustable cutting pressure: 0 - 10 m/min - Hydraulic material clamping with adjustable clamping pressure - Coolant system - Chip conveyor - Total drive power: 400 V / 8.5 kW - Required space approx.: W 2350 x H max. 2340 x D 3050 mm - Weight approx.: 1900 kg - Infeed roller conveyor: 1500 mm

Condition: new, capacity Ø 30 - 160 mm Saw Body 30 Grad Linear Schlitten sawing motor 15 kW hydraulic motor 3 kW Saw Feeding Servo 1,5 KW Siemens Saw speed 30-120 rpm /min saw-blade dia. Ø480 x 2,25 x 2,7 x 50 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl weight of the machine ca. 5550 kg required space 3200 x 7600 mm Please use the contact form for price information. GERD WOLFF GLS-160 High-performance circular saw Introducing the new generation of High-Performance Metal Circular Saws, seamlessly blending precision and efficiency with German quality. Our High-Performance Metal Circular Saw machines are setting the standard in metalworking thanks to their innovative technology, allowing for precise and effortless cutting of steel of any kind. From 10 millimeters to an impressive 250 millimeters in steel diameter, our machines cut with utmost accuracy within Gisdpey Aplusfx Alxst seconds. At the core of these machines are their automatic functionalities, coupled with an advanced ball screw spindle and an automatic material feeding system. This combination ensures not only maximum precision but also impressive speed. A Siemens motor and Siemens PLC screen guarantee reliable performance and easy control. Moreover, our High-Performance Metal Circular Saw machines feature a special system for quick and convenient blade changes. The hydraulic material tension provides secure fixation of the workpiece during the cutting process. Additionally, a programmable misting system is integrated to ensure optimal lubrication and cooling of the saw blade, extending the tool's lifespan. With our servo and driver technology, you have full control over your manufacturing processes, allowing you to optimize production and achieve the highest quality standards. Choose our High-Performance Metal Circular Saw machines and embrace the future of metalworking – precise, efficient, and reliable.

Condition: excellent (used), Catalogue number 7940 TECHNICAL DATA - Max. saw blade diameter: 500mm - Spindle diameter: 30mm - Blade guard included Gijdpfx Aeywtr Uelxst - Hydraulic blade feed - Cutting height: 140mm - Main motor: 4.4kW - Table size (L/W): 570x870mm - Table height from base: 750mm - Roller tables: 2 pcs - Infeed roller table: 1170mm – Outfeed roller table: 1210mm - Sliding roller width: 600mm - Overall dimensions (without roller tables) L/W/H: 1040x820x900mm - Weight: approx. 570kg ADVANTAGES – Made in Germany – 2 roller tables – Pneumatic saw blade stroke – Used saw in perfect condition Net price: 13,900 PLN Net price: 3,300 EUR (based on exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7937 Giodpfxeywtpte Alxet TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7956 TECHNICAL SPECIFICATIONS - Max main blade diameter: 350 mm - Blade bore diameter: 30 mm - Max cutting height: 90 mm - Main blade adjustable up/down and at angle - Blade guard included - With side carriage - Cutting length on carriage: 1300 mm - Cutting width on guide: 1340 mm - Main motor: 4 kW - Table dimensions: 1100 x 1030 mm - Table dimensions with extension: 2100 x 1840 mm - With scoring unit - Max scoring blade diameter: 100 mm - Scoring spindle diameter: 22 mm - Scoring motor: 0.55 kW Gsdeyy Rqaspfx Alxeit - 3 spindle speeds: 4000, 5000, 6500 rpm - Dust extraction nozzle diameter: 125 mm - Dimensions (L x W x H): 3280 x 2340 x 1450 mm - Weight: 866 kg ADVANTAGES – Made in Poland – Blade guard included – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11900 PLN Net price: 2840 EUR (based on rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: excellent (used), Catalogue number 7959 TECHNICAL DATA - Track width: 250 mm - Shaft width: 250 mm - Maximum saw blade diameter for multi-blade saw: 350 mm - Saw blade bore diameter: 70 mm - Maximum cutting height for multi-blade saw: 120 mm - Table width with clearance: 830 mm - Table length: 1780 mm – Top section: - Kickback devices - Pressure roller, sliding, metal, smooth - Kickback devices - Pressure roller, sliding - Shaft with saw blades - Pressure roller, sliding, metal, 2 pcs – Bottom section: - Guide rail - Kickback devices - Track (caterpillar) - Electric body up/down adjustment - Manual adjustment of shaft with saw blades - Central lubrication - Infinitely variable feed speed adjustment - Feed motor 1.1 kW - Main motor 37 kW - Extraction port diameter: 170 mm - Overall dimensions (L/W/H): 2000x1500x2000 mm - Weight: 1850 kg ADVANTAGES – German-made – Used multi-blade saw, in very good condition Godpfx Aloy Am Eroxoit Net price: 45,900 PLN Net price: 10,930 EUR depending on the rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: excellent (used), CATALOG NUMBER 7918 TECHNICAL DATA - Max. saw blade diameter: 450mm - Spindle diameter: 30mm - Pneumatic top clamp - Blade guard - Blade guard also functions as a hold-down clamp - Pneumatic blade feed - Cutting height (at 250mm width): 120mm Gisdpfx Aljyrr R Djxet - For lower cutting heights, the cutting width is increased - Main motor power: 6kW - Extraction nozzle diameter: 120mm - Table dimensions (LxW): 650x850mm - Table height from base: 1000mm - Roller tables: - Infeed roller table + stop: 3180mm - Outfeed roller table + stop: 2450mm - Roller width: 360mm - Operating pressure: 8 bar - Overall machine dimensions (without roller tables) LxW xH: 1300x1050x1800mm - Weight: 550kg FEATURES – 2 roller tables – Pneumatic blade stroke – Used saw, in perfect condition Net price: 14,900 PLN Net price: 3,550 EUR (based on EUR rate of 4.2) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7833 TECHNICAL DATA - Max blade diameter: 400mm - Blade bore diameter: 30mm - Max cutting height: 110mm - Main blade adjustable up/down and at an angle - Blade guard included - With side carriage - Angle guide - Cutting length on carriage: 870mm - Cutting width at the fence: 600mm - Main motor approx.: 4kW Giedpfeyz Nycjx Alxst - Table dimensions: 900x1020mm - Extraction port diameter: 110mm - Overall dimensions (L/W/H): 2500x1400x1000mm - Weight: 530kg ADVANTAGES – Polish manufacture – Includes side carriage – DTR technical documentation – Used saw, very good condition Net price: 7500 PLN Net price: 1790 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Giodoycqhcspfx Alxjt Weight 491 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V Godpfsy Dcu Eox Alxoit - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade mount: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontal 45°: 220 x 60 mm - Profiles vertical 45°: 80 x 120 mm - Saw motor: 3.7 / 4.5 kW - Cutting speed: 1750 / 3500 m/min - Saw blade feed: 0 - 3700 mm/min - Saw blade rapid return: 4500 mm/min Additional equipment: - Workpiece clamping with short stroke vise: stroke 8 mm - With hand crank for presetting - Machine overhauled and newly painted - Horizontal clamping cylinder front, each - Minimum quantity lubrication instead of coolant spray system - T3 feeder roller conveyor with rollers 60 x 289 mm - One starter section: 2000 mm, with 5 rollers, one support leg, one mounting angle - One extension section: 2000 mm, with 4 rollers, one support leg, one stop roller, adjustable as a guide for material bars - Length measuring device including T3 discharge roller conveyor Note: The item must be collected by binding appointment between 07 and 09 July 2026 (exact date to be agreed). FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119349, saw blade diameter: 450 mm, total length: 12,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 1,500 kg, KALTENBACH SKL 450 H Cold Circular Saw (completely overhauled) - Saw blade diameter: 400/450 mm - Saw blade mounting: 50/4 x 14/80 Gjdsy Dcrwopfx Alxsit - Working range, round material 90°: 135/160 mm - Square 90°: 125/145 mm - Profiles 90°: 300 x 40 mm / 320 x 50 mm - Profiles horizontal 45°: 220 x 60 mm / 250 x 40 mm - Profiles vertical 45°: 60 x 130 mm / 100 x 150 mm - Saw motor: 3.7 / 4.7 kW - Cutting speed: 1950 / 3900 m/min - Infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring system L45E, one starter section: 2000 mm, horizontal clamping system SKL 450 Note: The machine has been completely overhauled! Note: The item must be definitively collected between 07 and 09 July 2026, on a date to be agreed. FCA D-71263 Weil der Stadt - loaded onto truck

Condition: new, Year of construction: 2026, neu 2026 060214 Gijdswirybepfx Alxot Juni 2026, Zwischenverkau Türkei 7700 € 148.61 € Schwenkrahmen 2730x27x0,9 mm 35/70 m/min 230 mm 230 mm 320x130 mm rund 210 mm, quadrat 190 rund 130 mm, quadrat 100 rund 180 mm, quadrat 150 805 mm 0.37 kW 1.3 kW 0.12 kW 1350 mm 700 mm 1300 mm 430 kg swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame mechanical vice with quick clamping coolant equipment machine base chip collecting tray user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 29800 € 569.18 € Schwenkrahmen 3660x27x0,9 mm Giodpjwirhlefx Alxet 15-120 m/min 320 mm 320 mm 350x320 mm rund 170 mm, quadrat 150 rund 260 mm, quadrat 220 rund 320 mm, quadrat 280 740 mm 1.1 kW 2.2 kW 1 kW 0.12 kW 2120 mm 2100 mm 1810 mm 1810 kg NC control panel servo feed with ballscrew spindles hydraulic vice hydromechanical blade tension inverter coolant pump saw blade blade brush security switch height adjustment user manual in GERMAN or ENGLISH OPTION: hydraulic blade tentioning