Used Oma 600 for sale (15,859)

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 4,500 kg, lifting height: 4,450 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 3,050 mm, drive type: Elektro, Electric 4-wheel forklift Isdpfx Aswtu Aasb Nsib Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: good Front tire type: superelastic Front tire condition: 60 - 80% Rear tire type: superelastic Rear tire condition: 20 - 40% Battery year: 2019 Description: The vehicle is UVV-inspected. The machine will receive service and cleaning before delivery. Upon request and for an additional charge, the machine can be painted. Sideshift, 3rd valve, 4th valve, front work lights, heater, full cabin.

Condition: used, Year of construction: 2017, operating hours: 9,615 h, load capacity: 3,000 kg, lifting height: 4,095 mm, free lift: 150 mm, mast type: simplex, construction height: 2,800 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Iodpfjun A H Tox Ab Nsib Technical condition: Good Front tires Type: Superelastic Front tires Condition: 60 - 80% Rear tires Type: Superelastic Rear tires Condition: 40 - 60% Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,348 h, load capacity: 5,000 kg, lifting height: 4,460 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 3,130 mm, drive type: Diesel, Diesel forklift Load centre: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Superelastic Iedpjyxtpcsfx Ab Njib Front tyre condition: 20 - 40% Rear tyre type: Superelastic Rear tyre condition: 20 - 40% Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heater, soot filter, road approval (StVZO), fully enclosed cab, air conditioning, twin tyres, LED,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,020 h, load capacity: 3,000 kg, lifting height: 6,880 mm, free lift: 2,194 mm, fuel type: electric, mast type: triplex, construction height: 2,974 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 600 ISO classification: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Iiedpfx Ajy N E Edsb Nob Battery year: 2018 Rear work light, front work light, heater, full cab, full free lift, seat,

Condition: used, Year of construction: 2017, operating hours: 6,720 h, load capacity: 4,000 kg, lifting height: 4,150 mm, free lift: 150 mm, mast type: simplex, construction height: 2,900 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: good Front tires Type: Superelastic Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Condition: 60 - 80% Iiedpfx Aouncndob Nsb Battery Volt: 80V Battery type: PzS Battery year of construction: 2017 Description: The vehicle is UVV - checked. Before delivery, the machine is serviced and cleaned. On request, the machine can be painted for an additional charge. Sideshift, tine adjuster, 3rd valve, 4th valve, front work lights, heating, STVZO, full cab,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 8,787 h, load capacity: 4,000 kg, lifting height: 4,910 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: good Front tires Type: Superelastic Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Condition: 40 - 60% Battery Volt: 80V Battery type: PzS Battery year of construction: 2020 Sideshift, Ijdpfx Absvbl Hme Neib 3rd valve, 4th valve, Front working lights, Heating, STVZO, Full cab,

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 8,668 h, load capacity: 2,500 kg, lifting height: 7,480 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 3,100 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Iiodpfx Asvla Eljb Njb Front tires Type: Superelastic Front tires Condition: 20 - 40% Rear tires Type: Superelastic Rear tires Condition: 20 - 40% Description: The vehicle is UVV - checked. The machine is serviced and cleaned before delivery. On request, the machine can be painted for an additional charge. 3rd valve, 4th valve, front work lights,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,152 h, load capacity: 2,500 kg, lifting height: 3,260 mm, fuel type: electric, mast type: duplex, construction height: 2,022 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Duplex Technical condition: very good Iodjvla Exspfx Ab Njib Front tires type: super elastic Front tires condition: 80 - 100% Rear tires type: super elastic Rear tires condition: 60 - 80% Side shift, 3rd valve, rear work lights, front work lights, heating, full cabin, air conditioning,

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 11,789 h, load capacity: 2,500 kg, lifting height: 6,430 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Load centre of gravity: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tyres type: super elastic Front tyres condition: 80 - 100% Rear tyres type: super elastic Rear tyres condition: 60 - 80% Description: Double pallet fork, 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, full free lift, Isdpfovla Hiex Ab Njib

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,969 h, load capacity: 2,500 kg, lifting height: 4,095 mm, fuel type: electric, mast type: simplex, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Technical condition: Very good Front tires Type: Superelastic Front tires Condition: 20 - 40% Rear tires Type: Superelastic Rear tires Condition: 20 - 40% Battery Volt: 80V Battery Ah: 620Ah Battery year of construction: 2017 Double pallet fork, 3rd valve, 4th valve, Rear working lights, Front working lights, Heating, Full cab, Iiedovla Hcopfx Ab Njb

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 7,209 h, load capacity: 3,000 kg, lifting height: 7,480 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 3,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: Good Front tires Type: Non Marking Front tires Condition: 20 - 40% Rear tires Type: Superelastic Rear tires Condition: 40 - 60% Description: The vehicle is UVV - checked. The machine is serviced and cleaned before delivery. On request, the machine can be painted for an additional charge. Sideshift, tine adjuster, Iisdpfxjunnr Is Ab Neb 3rd valve, 4th valve, front work lights, heating, full cab, full free lift,

Condition: used, functionality: fully functional, machine/vehicle number: H2X387H03868, Year of construction: 2017, operating hours: 7,299 h, load capacity: 3,000 kg, lifting height: 7,480 mm, fuel type: electric, mast type: triplex, construction height: 3,174 mm, drive type: Elektro, Electric 4-wheel forklift truck Fahrgestellnummer: H2X387H03868 Load center: 600 Mast type: Triplex Technical condition: very good Iijdpfx Absun A E No Nob Description: The vehicle is UVV - checked. The machine is serviced and cleaned before delivery. On request, the machine can be painted for an additional charge. In addition to this vehicle model, we have approx. 250 other forklift trucks of all weight classes in stock in our warehouse in Meschede-Calle. Visit our homepage: rf-stapler Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our master forklift workshop specializes in repairing, servicing and overhauling your old forklift truck. We are also happy to display your vehicle for sale. Fork positioner, 3rd valve, 4th valve,

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Isdsy Swq Rspfx Ab Noib 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support Iedpfox R Uw Sjx Ab Neib * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 46 Nm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle nose: HSK A 63, number of slots in tool magazine: 170, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Heidenhain iTNC 530 WORKING AREA Longitudinal travel X: 800 mm Transversal travel Y: 600 mm Vertical travel Z: 500 mm B axis: +30° / -100° C axis: n x 360° WORK TABLE Table dimensions: 320 x 320 mm Maximum workpiece weight: 120 kg SPINDLE Spindle taper: HSK A63 Maximum spindle speed: 24.000 rpm Motor power 40% ED: 22 kW Maximum torque 40% ED: 46 Nm Iijdpfx Absy Tam Rj Nsb AUTOMATION Tool magazine capacity: 170 tools Erowa pallet changer: 7 positions MACHINE EQUIPPED WITH • High-pressure coolant through spindle • Probe • Laser tool presetting • Chip conveyor • Oil mist cooling system • Rotoclear • ITC Intelligent Thermal Control • ITC-5X 5 Axis Intelligent Thermal Control • APS Advanced Process System • Remote electronic handwheel • Instruction manuals and CE declaration

Condition: excellent (used), CATALOG NUMBER 7904 Technical data: - Max cutting height: 160mm - Max element width: 700mm - Working width of the shaft with saws: 600mm - Shaft diameter: 70mm - Max saw blade diameter: 450mm - Top: - Pawls - 2 geared feed rollers - Pressure with metal slip roller - Bottom: - Slip roller - Pawls - Geared feed roller - Shaft with saws - Smooth feed roller - Metal slip roller - Infinitely variable feed speed control Isdpfx Abey S Ab Io Njib - Feed motor: 1.5kW - Main motor: 55kW - Overall dimensions L/W/H: 1700x1400x1900mm - Weight: approx. 2740kg ADVANTAGES – Made in Poland – Robust construction – Used machine, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), Technical condition: very good Visual appearance: very good Iisdpjt Dltbefx Ab Njb Please contact Ferdinand Pater for more information

Condition: excellent (used), Technical condition: very good Isdpfx Abet Hty Uj Neib Visual appearance: very good Please contact Ferdinand Pater for more information

Condition: good (used), Technical condition: good Visual appearance: good Please contact Ferdinand Pater for more information Iiodpfxot Dlure Ab Neb

Condition: excellent (used), Technical condition: very good Iiedpfx Aet Dlq Tjb Neb Visual appearance: very good Please contact Ferdinand Pater for more information

Condition: excellent (used), Technical condition: very good Visual appearance: very good Please contact Ferdinand Pater for more information Iisdpfot Dlq Hsx Ab Neb

Condition: excellent (used), Year of construction: 2014, Kunzmann WF 600 M Tool Milling Machine Kunzmann WF 600 M with Heidenhain TNC 124 Control Year of manufacture 2014 Excellent CONDITION CE-compliant!! Technical Data: Year of manufacture: 2014 Fixed angle table Spindle speed: continuously variable up to 4000 rpm Feeds: stepless in 3 axes from 0 to 2000 mm/min Travel X/Y/Z: 600/400/400 mm Rapid traverse x/y/z: 5 / 5 / 4 m/min Table size: 650 x 350 mm Table load: 250 kg Vertical quill travel: 60 mm Vertical and horizontal spindle, SK40 Hydraulic clamping system Weight approx. 1700 kg Iiedoy Sihzjpfx Ab Njb Space requirement approx.: 2.3 x 2 x 2 m Drive power: 12 KVA Accessories and Equipment: Heidenhain TNC 124 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control and programming examples Handwheels, coolant unit, tool holders, vise About the Machine: Offered here is a Kunzmann WF 600 M tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is straightforward, simply by swinging away the vertical head. The guides are reliably lubricated via central lubrication. The Kunzmann has been mechanically and electrically tested at our facility. Take the opportunity to inspect and test the Kunzmann under power at our premises. You can find more milling machines from renowned manufacturers on our website.

Condition: excellent (used), Year of construction: 2024, operating hours: 250 h, 3-axis CNC machine (VMC) MAZAK - VCE-600 MACH-ID 9485 Make: MAZAK Type: VCE-600 Control: Mazatrol SMOOTHEZ Year: 2024 Only 250 Spindle Hours ATC 48 Position Lehmann EA-520 R-Mi4 4e axis integrated Grundfos IKZ 20 Bar Renishaw 3D Tool probe Renishaw Length probe Optional tooling packge Iijdpfx Abeyyygwe Nsb Optional SCHUNK KONTEC KSG Machine vice (4 units) New EUR 200.000 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2019, operating hours: 7,650 h, load capacity: 2,000 kg, lifting height: 4,649 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Linde H20D-02/600 triplex 465 Freelift / Sideshift / Fork positioner 2019 VW Diesel 7,650 hours Video can be sent via WhatsApp. Continuous stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a changing inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices on an AS-IS basis without warranties (see our general terms and conditions). For a viewing and/or test drive, you can make a non-binding appointment. Iodpfxsy Rqflo Ab Nsib Please call in advance as we are not constantly present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2017, total length: 2,000 mm, total height: 2,400 mm, total width: 1,350 mm, Colour: Grey - Details: - └ Description: Excluding magnet - Year: 2017 - Documentation available: No - CE certificate present: No Iijdpsx Dik Rjfx Ab Nob - Serial number: 600 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Hydraulic unit power [kW]: 3.0 - Oil tank capacity [L]: 48 - Number of shafts [pcs.]: 1 - Opening width [mm]: 600 - Opening length [mm]: 250 - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 20+ - Transport dimensions: 2000mm x 1350mm x 2400mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels