Used Onurmaksan Lk100 Lab Jaw Crusher for sale (5,162)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece Pgodjy R Sgdopfx Abysl -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 3.0 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set Podpfx Abey R R Ndeyjgl -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/90/H56 mm -Total weight: 2.0 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Podpoy R R I Tsfx Abysgl -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 2.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm Pjdpfjy R R D Ijx Abyogl -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm -Total weight: 2.8 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 28 mm -Dimensions: see photo technical drawing Psdpfx Absy R Rzysyjgl -Overall dimensions: 90/85/H58 mm -Total weight: 2.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm Podpfxoy R Ru Hj Abyjgl -Total weight: 2.8 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Psdjy R Rt Aepfx Abyjgl -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/80/H65 mm -Total weight: 3.2 kg

Condition: used, all stainless steel Pjdpfxjy Rl Dij Abyjgl for product up to 530 x 530 mm Dimension: (L x W x H): 950 x 1.450 x 1.900 mm 3 x 380V, 50Hz, 22kW

Condition: new, functionality: fully functional, power: 200 kW (271.92 HP), overall weight: 17,500 kg, Year of construction: 2026, Model 440 Cone Crusher is designed for secondary and tertiary crushing applications, delivering high performance, durability, and consistent product quality. With its robust chassis and heavy-duty construction, it is suitable for crushing hard and abrasive materials such as granite, basalt, limestone, and river stone. Psdpfx Absyidtvoysgl The crusher is equipped with a high-capacity crushing chamber and a powerful drive system, ensuring efficient material reduction and stable operation even under demanding conditions. Its optimized cone geometry provides excellent cubic product shape while maintaining high throughput. The hydraulic adjustment system allows easy setting changes and overload protection, reducing downtime and simplifying maintenance. Wear-resistant components and quality bearings extend service life and lower operating costs.

Condition: excellent (used), functionality: fully functional, Silverson 150l Inline Lab Mixer With Brook Hansen 0.75kW Motor Complete on trolly for easy transportation. Pgedpjym Al Iofx Abyel Removed from "blue chip" pharma company in Cork. IE

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks Pgjdpfxjri Un Hj Abyol -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 14 mm -Dimensions: see photo technical. drawing -Total dimensions: 50/60/H35 mm -Total weight: 0,5 kg

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, This stationary crushing and screening plant is designed to meet the needs of asphalt and concrete aggregates with high capacity and superior quality. With a production capacity of 500 tons per hour, the plant stands out in terms of both efficiency and product quality thanks to its modern engineering approach and optimized process flow. The feeder bunker and intermediate screen system in the plant's feeding unit ensure the controlled and balanced transfer of raw material to the crushing line. This ensures a continuous and stable production flow throughout the system, maximizing equipment performance. The CLK 130 jaw crusher, with its high strength and powerful crushing capability, plays a critical role in the initial stage of the process by effectively reducing large-sized material. Supported by an under-jaw vibro feeder, the system regulates the material flow, providing homogeneous feeding to the secondary impact crusher group. The positioning of all these units on a single platform and with a beltless flow principle saves space and offers ease of maintenance and operation. This innovative approach also contributes to reducing operating costs by increasing energy efficiency. The TK150 tertiary crusher and VSI 900 vertical shaft crushers, located in the advanced crushing stage of the plant, enable the production of cubic and high-quality aggregates, which are particularly needed in asphalt and concrete production. Thanks to this equipment, the particle shape and granulometry of the product are obtained in accordance with international standards, and the final product quality is significantly increased. The three horizontal screens in the system enable the precise classification of aggregates of different sizes, offering a variety of products to meet customer needs. Thanks to the screening efficiency, maximum product recovery is achieved with minimum waste, and the overall performance of the plant is optimized. Pgodpfxjy E E T To Abysl This high-capacity crushing and screening plant, with its robust equipment structure, innovative design approach, and high-quality-oriented production philosophy, will make significant contributions to the region's infrastructure projects. Standing out as a sustainable, economical, and high-performance solution in both asphalt and concrete aggregate production, the plant fully meets the requirements of the modern mining and construction sectors. MAIN EQUIPMENT OF THE PLANT: 50 M3 FEEDING BUNKER PRE-SCREEN CLK-130 JAW CRUSHER 1300x1100 MM HDK-1115 IMPACT CRUSHER 1200X1500 MM VSI-900 VERTICAL SHAFT CRUSHER CLOSED ROTOR TK-150 TERTIARY CRUSHER 1200X1500 MM HORIZONTAL SCREENS STOCK BUNKERS CONVEYOR BELTS CONTROL CABINET AND AUTOMATION SYSTEM

Condition: used, Komac Hydraulic Hammer CW05 = More information = Suitable for: Construction machinery Please contact Miguel Cubas for further information. = Company information = Pgedjxnq Nvopfx Abyjl We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: ready for operation (used), Double Roll Crusher AGJ, Roller Pair Used Machine Roller width: 500 mm Pgsdpoxnl Hiefx Abyol Roller diameter: 600 mm Engine power: 18,5 kW RPM: 980/min Weight: 3700 kg

Condition: ready for operation (used), * Brand: Metso/CFBK * Type: 940 S * Incl.: 110 kW E-motor * Incl.: hydraulic unit and control unit. Pedpfxsy H Igxe Abyogl

Year of construction: 2018, condition: excellent (used), functionality: fully functional, HIGEL ICE FLAKER Professional Ice Flake Machine for the Food Industry 1. Application Flake ice produced by HIGEL machines is widely used in: * meat, fish, and poultry processing plants, * bakeries and food processing facilities, * gastronomy and catering services, * laboratories, supermarkets, * hospitals and rehabilitation centers. A consistent ice temperature between ‑6°C and ‑8°C ensures dry, frozen ice flakes with optimal flow, even during extended storage periods. 2. Features and Benefits * Construction made from high-quality alloy steel, corrosion-resistant * Refrigerant: CO2 * High output with low energy consumption * Excellent performance – stable and reliable ice production * Automatic water residue discharge (standard on selected models) * Long service life and easy maintenance 3. Technical Specifications Parameter Value Output up to 800 kg / 24 h Power consumption 0.15 kW Supply voltage 400 V / 50 Hz Machine weight 78 kg Dimensions (W/H/D) 1000 × 600 × 600 mm 4. Advantages of HIGEL Ice Makers * Dry, fine flake ice at a constant temperature * High reliability in continuous operation Pgsdpfey Nlicex Abyol * Energy efficiency * Low operating costs * Robust, industrial-grade design – ready for use in demanding conditions.

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Pgedpfju Thpnex Abyjl Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: used, Year of construction: 2019, operating hours: 4,240 h, functionality: fully functional, Used Cone Crusher HCU 7/160 After Complete Refurbishment – Available Immediately We offer for sale a fully refurbished cone crusher HCU 7/160 after complete overhaul and replacement of internal wear parts with new ones. The machine is in very good technical condition and ready for immediate operation. Price: EUR 89,900 – complete crushing unit + EUR 16,890 – new hot-dip galvanized supporting steel structure with stairs, walkways, and operator platform Scope of Supply 01 – Complete Crushing Unit with Cone Crusher HCU 7/35-160 Includes: Hydraulic cone crusher HCU 7/35-160 Oil station for crusher setting adjustment and bearing lubrication Common frame for crusher and drive Feed hopper 4 pcs rubber springs (silent blocks) Positive pressure dust protection system for crusher and oil tank (filter + blower) 90 kW drive, 400 V, 50 Hz Automatic control system with visualization Automatic grease lubrication Power control cabinet, Y/D motor starting Refurbishment and Technical Condition Complete general overhaul of the machine New internal wear parts Refurbished electrical control cabinet Ready for immediate operation Robust design suitable for quarries, recycling, and mining operations Podpey Nxnrjfx Abyogl Optional – New Steel Structure Available completely new: Hot-dip galvanized supporting steel structure Stairs Service walkways Operator platform Structure price: EUR 16,890 Please contact us for more information or a commercial offer.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2015-26004, power: 5.5 kW (7.48 HP), 1.3 Fine Crusher System FB 1000 DS1 Fine Crusher FB 1000 DS1 FG3 Drive power: 5.5 kW + 3.0 kW Design: 1 x cutting roller with spike discs (upper) 1 x dosing roller with spike discs (lower) Maximum processable panel thickness: approx. 100 mm Maximum processable density: 50 g/liter Clear width: 1000 mm Infeed height from conveyor belt: 180 mm Additional protective cover on conveyor belt (site-installed) Screw conveyor discharge for Fine Crusher FB 1000 DS1: Drive power: 0.75 kW Intake nozzle: NW 200 mm Incl. maintenance hatch with safety switch Podeyvfhwopfx Abyegl

Year of construction: 2023, condition: as good as new (ex-display), hydraulic tappet to fit any shredder or rotary shear . currently on sale mounted on a dechipper for destruction of hollow bodies . Pjdpfxjvitq Ae Abysgl

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 46,000 kg, Year of construction: 2026, *All of our products are carefully manufactured and have a 1-year warranty! Pgodpfoy Tnmxsx Abyol *Installation and Operator Training are FREE! FTC-200-S Mobile Cone Crusher (With Screen); It consists of a feeding bunker, cone crusher and stock conveyor belt and generator. FTC-200-S Mobile Cone Crusher (With Screen), which is moved by remote control on a tracked chassis, successfully completes all commands given by the user by moving on its tracks in all kinds of difficult climate conditions and rough terrain. FTC-200-S Mobile Cone Crusher (With Screen), is precisely designed and carefully manufactured for stone crushing and is the leading mobile cone crusher in the sector with a crushing capacity of 100-200 T/H per hour. FTC-200-S Mobile Cone Crusher (With Screen) does not require an extra infrastructure as a production method, it is moved by remote control as mobile and adapts to all difficult terrain conditions. TECHNICAL SPECIFICATIONS: Model: FTC 200-S Crusher Type: Cone Crusher Vibrating Screen Size: 1300x3000 mm Production Capacity: 100-200 T/H Maximum Feed: 185mm Total Power: 300 kVA Weight: 46,000 Kg PLEASE CALL US FOR DETAILED INFORMATION!!!

Condition: new, functionality: fully functional, power: 200 kW (271.92 HP), fuel type: electric, color: other, overall weight: 15,900 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE PDK Series Primary impact crusher is a rotor type crusher and an expert in crushing less abrasive materials with medium hardness with very high reduction and cubical ratio. Primary impact crushers can be preferred for crushing large sized stones and it lowers secondary crushing requirement in entire systems. PDK series impact crushers deliver unbeatable performances in primary, secondary and tertiary applications. The crusher consists of two parts, body opening and adjustment systems operate easily with the hydraulic power unit thus provides an advantage for easy maintenance and minimum stopping for a constantly work. We produce PDK crushers as Mobile Primary Impact Crusher and Stationary Primary Impact Crusher. General Specifitions and Futures: • High capacity • High reduction ratio • Wear surfaces are protected by solid-filler electrode welding • Hammers and crushing plates are manufactured from high manganese steel casting • Inner surfaces of the crusher is coated with wear resistant lining plates • Wide intake with chain curtain due to protection from back-leaping •Hydraulic setting system TECHNICAL SPECIFICATIONS Pgjdoy Tnluspfx Abyel • Model: FABO PDK-100 • Type: Primary Impact Crusher • Rotor Size: 1200 x 1000 mm • Max Feeding: 600 mm • Capacity: 150-200 TPH • Motor Power: Heavy duty GAMAK,200 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 15900 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 400 V, DGUV certified until: 05/2028, total length: 810 mm, total width: 720 mm, total height: 1,610 mm, input frequency: 50 Hz, type of input current: three-phase, For all light / dark rest broths etc. "The universal crusher" stainless steel Performance hrs / 1500 kg dry With pouring ring Screen 3/5/8 and 12 mm (included) Connection 400V, 11 kW, 32A-CEE connector Pgsdpfx Asdg Hn Usbyel Dimensions: 720 x 810 x 1610mm, WxDxH Ejection height 495

Condition: excellent (used), functionality: fully functional, three-jaw chuck diameter: 160 mm, Three-jaw chuck eccentric – clamping chuck Pgedpsg Umb Esfx Abyol 1 piece used, very well-maintained Horvath Fischer eccentric clamping chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentricity: 25 mm, chuck mounting cylindrical with a diameter of 150 mm, complete with chuck key and one set of hardened stepped jaws as well as the installation and operation manual for the Horvath eccentric chuck, all likely in the original wooden box (Hahn & Kolb). Year of manufacture unknown. From our own inventory. Eccentric lathe chuck for clamping workpieces on a lathe. Price €195 net ex stock, plus packaging costs. All technical data subject to errors and omissions. We sell exclusively to countries of the European Community.

Condition: used, Workbench vice, parallel vice LEINEN with dovetail guide and height adjustment. Model: 125. Jaw width: 125 mm. Jaw height: 23 mm. Clamping range: max. 200 mm. Overall height: 550 to 750 mm. - 360° rotatable. - Dovetail guide. - Anvil surface for light straightening work. - Approx. 200 mm height adjustment without lift system. Weight: 44.5 kg. Good condition. Pgedpfsy E T Dyox Abyjl