Used Ops Ingersoll Gantry 800 for sale (9,262)

Condition: like new (used), Year of construction: 2020, machine/vehicle number: CL5058002, functionality: fully functional, operating hours: 9,000 h, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, oil tank capacity: 800 l, overall weight: 800 kg, Equipment: CE marking, Specifications of the MULLER Combiloop CL5-800 150 high-pressure unit and filtration system, 800L/27L, 150 bars: - 800L capacity with level sensor - Centrifugal pump for supplying dirty fluid - Self-adjusting HP Eco+ pump, 150 bar/27L/min (5.5kW) Gsdezhi Nnopfx Afujbu - 8 controllable outputs, including one output for counter-spindle rinsing - 1 low-pressure pump with constant flow rate, 100L/min, 5 bar (1.2kW) - 1 low-pressure pump with constant flow rate, 80L/min, 3.5 bar (1.9kW) - Automatic 40μ filtration with automatic control and clogging detection - Complete high and low-pressure filtration - Pressure control for the part program - Whole oil (recommended viscosity for machining: 15-22 mm²/s; for deep drilling: 5-8 mm²/s) - Includes: EURO COLD RCFO 95t cooling unit - Excellent condition (very little use)

Condition: used, Year of construction: 2002, Suitable for cleaning coolant oil for grinding carbide. Accesories: 2 filter towers, automatic backwash. container content: 800L flow capacity max: 100L/min. Filter fineness:: greater than 0.003mm Connected load approx.: 4.0kW (400V/50Hz) Dimensions W x D x H: 1650 x 1000 x 2000 mm Weight approx.: 1000 kg Gsdpfx Afezic R Iouobu colour: Grey

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 17659, total length: 11,000 mm, total width: 3,000 mm, total height: 2,600 mm, overall weight: 40,000 kg, Includes handling equipment, peripherals, and conveyor belt. Gbedpfozrd Slox Afueu A used machine is being sold as part of a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm table surface area 560 x 650 mm Gbodpfxszl E Sao Afusu capacity of ejector 5 t ejector stroke 15 mm ram surface 590 x 450 mm power requirement 22,0 kW Weight 17,0 t dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Nominal force travel 1,46 mm With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control

Condition: excellent (used), Year of construction: 1996, x-travel 800 mm Gbedpey Tyznjfx Afuju y-travel 600 mm z-travel 500 mm

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Clamping plate: Scribing and marking plate -Length: 800 mm -Width: 800 mm -Height: 128 mm Gedpfey N Arusx Afuobu -Sheet thickness: 23 mm -Quantity: 1 mounting plate available -Price: per piece -Transport dimensions: 800/800/H128 mm -Weight: 136 kg

Condition: used, Offer consist of: Calender production system -Rilecart R 800 Gjdezru Scjpfx Afujbu -Rilecart R 422 -Rilecart FAR-5/55 MK2 -SETMASTER -Kugler All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table, base -Base frame: Work table tubular frame frame with mounting plates for swivel casters Gedezru Tmepfx Afuebu -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg

Condition: good (used), Year of construction: 1998, Krauss Maffei KM 800-8000 MC injection molding machine Year of manufacture: 1998 Serial number: 8D980U9 Control system: Krauss Maffei MC3F Clamping force: 8000 kN (800 t) Screw diameter: 130 mm L/D ratio: 22:1 Injection volume: 6570 cm³ Injection weight (PS): 5617 g Gbjdpfx Aozrwy Aofusu Injection pressure: 1296 bar Maximum cylinder temperature: 375°C Distance between columns (H x V): 1120 x 1000 mm Dimensions of mounting plates: 1600 x 1530 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 95 kN (front / rear) Screw speed: 92 rpm Injection rate: 929 cm³/s Pump motor power: 132 kW Heater power: 70 kW Number of heating zones: 7 Dry cycle (EUROMAP): 700 cycles/h Oil tank capacity: 3600 l Supply voltage: 400 V / 50 Hz Machine length: approx. 10,500 mm Machine width: approx. 2650 mm Machine height: approx. 2400 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: WIL9, Demag hall crane, portal crane, bridge crane including steel structure with floor control Gedpfxozdcd So Afujbu Dimensions of steel structure approx. 36 x 14.5 m with 1x Demag bridge crane 2.5 tons - gauge 14.3 m Payload/lifting capacity 2500 KG - 2.5 t Technical data of the system: Crane track/steel structure consisting of HEB200/HEA240 beams Length of steel structure approx. 35.75 m Overall width (outer edge of steel structure) approx. 14.5 m Overall height of crane approx. 6.2 m Top of running rails approx. 5.41 m Bottom of running rails approx. 5.17 m Top of bridge approx. 6.2 m Bottom of bridge approx. 5.68 m Hook height approx. 5.2 m Gauge 14.3 m Support spacing approx.: 6.1 + 6.1 + 6.1 + 6.1 + 6.1 + 5.5 m System is delivered complete: Steel structure / supports made of HEA240, running rails HEA280 incl. power rail/power supply 1 bridge with 2500 kg Demag DH wire rope hoist with floor control Crane is disassembled and immediately available The location of the item is 75053 Gondelsheim Very good condition, see pictures Shipping by forwarding agent or collection only by appointment

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge and electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: P300 PROFI Crane System Year of manufacture: 2020 Machine type: Two-rail portal crane / workshop crane Description For sale is a used VETTER PROFI crane system, type P300, in a robust two-rail portal design with crane bridge, manual trolley, and electric chain hoist. The system was designed for industrial workshop operation and is ideally suited for assembly, production, mechanical engineering, maintenance, logistics, and material handling. The design complies with the crane classification HC2 / S2 according to EN 15011 and has a load capacity of 1,600 kg. Documentation, test book, and conformity documents are available. Technical data of the crane system Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Load capacity: 1,600 kg Crane classification: HC2 / S2 according to EN 15011 Operating mode: Workshop crane Control: Floor control Mounting: Composite anchor system Span: 5,100 mm Support spacing L: 5,590 mm Support spacing B: 5,100 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Beam length: 6,170 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal beam: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Steel structure group: 18/36/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Drive group: FEM 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Operating voltage: 400 V 3 PH / 50 Hz Control voltage: 24 V Manual trolley / travelling carriage Type: SiCO-HF 2000 A Design: Manual trolley Beam width: 66 - 220 mm Load capacity: 2,000 kg Self-weight: 17 kg Equipment - Two-rail portal crane system - Crane bridge - Electric chain hoist SIXX8AF - Manual trolley SiCO-HF 2000 A - Load hook - Floor control - Mains connection switch - Steel supports and beam structure - Composite anchor system - Documentation available - Test book available - EC declaration of conformity available Transport data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Total weight of the system, based on experience, approx. 2,000 - 3,500 kg Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Logistics Material handling Condition Used, functional, dismantled from ongoing operation. Optical condition according to pictures. Test book and technical documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and beam structure Floor control Mains connection switch Test book EC declaration of conformity Godpfjzgtzlex Afujbu Documentation Accessories according to pictures (Changes and errors in the technical data are subject to change.) Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 10,106 h, functionality: fully functional, machine/vehicle number: 107.86.00.246, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 500 mm Spindle speed: 24,000 rpm Table dimensions: 900 x 630 mm Number of axes: 3 MACHINE DETAILS Gedpfx Afozgt Uljujbu Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,550 x 2,900 mm Machine weight: 8,300 kg Connection: 400 V Operating hours Operating hours, control system: 58,372 h Operating hours, machine: 26,800 h Programmed hours: 10,106 h

Condition: used, mileage: 340,560 km, power: 260 kW (353.50 HP), first registration: 12/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2026, color: beige, gearing type: automatic, emission class: euro6, total length: 9,790 mm, total width: 2,600 mm, total height: 2,630 mm, loading space length: 7,550 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, * Special equipment: Schmitz deep-freeze box * Refrigeration unit: Thermo King UT 800 * Temperature recorder * Box side wall: 50 mm * Double-wing doors: 80 mm Feroplast * Storage compartment, high engine tunnel * Axle load measurement device * Front axle load: 8.0 t * Trailer stabilization program: TSA * Audio system: Digital radio DAB / DAB+ * Equipment package: Comfort * Cab: steel-sprung, Comfort * Sun visor, side window, driver's door * Driver's seat: Comfort, air-suspended * Airbag, driver's side * Equipment package: Visibility * Bi-Xenon headlights * Rear lights: LED * Headlight cleaning system (HCS) * Exterior mirror, right, with maneuvering position * Battery: 220 Ah * Brake connection: Standard and DuoMatic * CB radio * Cockpit: Interactive multimedia * Navigation system * Remote query function: Remote Online * High-pressure air unit * Air horn * Electrical pre-wiring in the cab: 24V / 100 A * Driver assistance system: Turning assistant * Transmission: 12-speed - Type: G 211-12 * Manual lift roof (steel) * Automatic climate control * Fuel tank: 290 liters, aluminum, right * Air deflector, roof (lockable) * Engine brake: enhanced * Wheelbase: 5500 mm * Frame overhang: 2700 mm * Reversing warning: acoustic and warning flashing light (external warning signal) * Tail lift switch * Seats in the cab: Driver's seat with massage function * Exterior sun visor * Additional stabilizer: rear axle / trailing axle * Additional 12V / 15 A socket in the co-driver's footwell * 24V / 25 A socket in the co-driver's footwell * Preparation for 4 surround cameras (display in the onboard monitor) * Preparation for additional headlights * Preparation for additional turn signals * Auxiliary heater (water) * Additional equipment: * Reversing camera * Emission standard: EURO 6D * Axle configuration: 4x2 * Actros 5 * Actros cab: S / M * Approach / front mirrors, heated * Trailer brake: 2-line, connections on the left * Trailer socket: 24V / 15-pin * Exhaust pipe directed to the center of the vehicle * Batteries arranged side by side * Differential lock: rear axle * High-pressure air unit with condensate monitoring * Automatic switching for dipped headlights (light sensor) * Cab: Hydraulic tilting mechanism * Cab: M ClassicSpace, 2.30 m, tunnel 320 mm, cab floor with engine tunnel 320 mm, cab: width 2.30 m, cab variant: M * Storage flap, external, left * Storage compartments with lids behind the driver's and co-driver's seats * Vehicle outline lights: LED * Suspension: Air / Air (full air) * Power windows * Windshield: tinted * Speed limiter * (AdBlue): 60 liters * Comfort locking system * Air intake from the front * Heated air dryer * Engine: 7.7 liters - 260 kW R6 Diesel (OM 936), engine variant OM 936 * Waste heat recovery * Disc brakes: front and rear axles * Key with remote control (2) * Side marker lights: LED, flashing * Seats in the cab: Co-driver's seat * Splash guard, front * Stabilizer: front axle * 12V socket in the co-driver's footwell * Tachograph / EC tachograph * Truck Data Center 7 (fleet management system) * Underrun protection, front * Preparation for toll collection * Preparation for Truck Data Center (fleet management system) * Front axle: curved * Permissible total weight: 18.00 t * Errors, changes and prior sale are subject to change. Gedpfx Afozuhlbjuobu

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000, Year of manufacture 2010 / Commissioned 2011, Siemens 840 D control system, Travel distances X 10,000 mm, Y 1,500 mm, Increased spindle carriage stroke: Z 1,000 mm, Increased through-height 1,000 mm, Gsdpfx Aozua N Sofusbu Through-width 1,500 mm, Main drive 36 kW, n = 6,000 rpm, 720 Nm 2-stage gearbox 1:4 SK 50 tool holder Machining performance in C45: Full drilling D=120mm, threading M55, milling 100cm³/min Gantry design with movable portal bridge and stationary machine table. Machine table with clamping bars in the transverse direction, each with 750 mm spacing. The standard plate fields are omitted. Gantry-style machine Hydraulic clamping device with clamping bridges for machining shafts, including hydraulic system Angle drilling & milling head, n = 4,000 rpm, SK50 High accuracy and stability due to Hirth gearing Automatic tool change in the angle head Measuring probe RWP20.50-M Swinging operation Safety fence with light curtains, manufacturer Sick Machine table with clamping bars in the transverse direction, each 750 mm Tool chain magazine on the portal stand with 30 positions Machine coolant system Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, adjustable in height by motor Partition wall with viewing panel Chip conveyor with hinged belt design Installation and alignment elements

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 917, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle type: Z80-K530.04 Drive type: SIE / HD MACHINE DETAILS Power: 24.5 kW Voltage: 230 / 400 V Frequency: 50 Hz Motor type: SERVO EQUIPMENT CE marking Measuring probe Gbodpfx Afjztxgmeuju Tool holders (as shown in the picture)

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 7,500 mm Godpskr Uzbofx Afusbu Number of bays per racking row: 03 units, each 2,400 mm Number of levels including base level: 02 units Included in the scope of delivery: 04x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian Blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal bracing, Base plates The uprights are delivered unassembled (bolted frame) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can pre-assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 12x Pallet racking crossbeams, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Crossbeam type: TRV1-240-084-30CE Agraffe: 5 hooks Clear width: 2,400 mm Max. load per pair of crossbeams: 1,600 kg, with evenly distributed load 06x Chipboard, 2nd choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Surface: possibly coated (possibly in two parts) 48x Z-brackets for locking/inserting chipboard, surface galvanized Suitable for chipboard flooring from 22 - 38mm, can be rotated and inserted on both sides For a width of 40 mm 24x Locking pins, new Design: fully galvanized For securing the longitudinal beams to prevent accidental lifting 16x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 08x Shims, new Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and frame loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Technical specifications for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical specifications for installation: Number of racking bays: 01 unit Length per racking bay: approx. 9,975 mm Number of bays per racking bay: 04 units, each 2,400 mm Number of levels including the base level: 02 units Included in the scope of supply: 05x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian Blue Upright type: P73 Upright profile: 75 x 75 x 2.0 mm Includes cross and diagonal braces, Base plates The uprights are delivered unassembled (bolted frame) 2,350 mm high 800 mm deep Gbodpfx Afjktbp Deuou Note: The racking uprights are delivered unassembled. We can pre-assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 16x Pallet racking beams, new Material color: RAL 7035 light gray Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Agraffe: 5 hooks Clear width: 2,400 mm Max. load per beam pair: 1,600 kg, with evenly distributed load 32x Locking pins, new Design: fully galvanized For securing the longitudinal supports against unintentional lifting 20x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 10x Shims, new Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and shelf loads, manufacturer, and batch number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope.

Year of construction: 2004, condition: good (used), TR 800 LIGNUMA circular sawmill - for prisms - user manual – feed on the inverter TECHNICAL PARAMETERS: horizontal clearance 480 mm vertical clearance 300 mm min. length of the processed material 1300 mm cutting width 65 - 340 mm height of sawn material 10 - 280 mm the ability to work on 2 and 4 discs type of saw Ø 800 mm power of the main drive motor 37 kW power of the feed drive motor 1.1 kW length of the feeding table 3200 mm receiving table length 2500 mm total length of the machine 7200 mm machine width 1000mm Gbjdpfjktg Shox Afuou machine height 1060 mm weight 1850 kg The main advantages of the machine: – stable structure – produced by the Polish reputable brand LIGNUMA – a leader among sawmill manufacturers - recommendable – for every professional

Year of construction: 2022, condition: new, We are offering new lineshaft gravity conveyor modules for sale. Technical specifications: Length: 3000 mm Roller width: 800 mm Includes supports and side guides Available quantity: 25 (75 linear meters) Price per module: €1,250 net If you are interested, please contact us. Godpfxokt Ur Rs Afuebu Worldwide shipping is possible.

Condition: ready for operation (used), Northrop Grumman 800-336-2112 / 609818X112 General Purpose Inductor, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gedpfei D I U Dox Afuobu

Condition: ready for operation (used), AEG / Schneider Modicon AS-B872-100, 800 I/O, analog output 4-20mA, 4 channels, serial no. 20032987, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gbjdpfxoi D Tt Tj Afuju

Condition: new, functionality: fully functional, Year of construction: 2026, A 1000 kg capacity gantry crane is an indispensable tool for workshop, assembly, and warehouse operations. Thanks to its mobile design, adjustable height, and the option of equipping it with a manually driven travelling trolley, it provides full flexibility and safety when lifting and transporting heavy components. It is an ideal solution for locations without access to fixed overhead cranes or ceiling-mounted lifting systems, where precision and reliability are essential. Main Advantages of the Gantry Crane Load capacity up to 1000 kg – enables safe lifting and handling of engines, gearboxes, structural components, and other heavy parts. Adjustable working height from 2500 mm to 3600 mm – allows adaptation to different workspaces and load dimensions. Mobility thanks to four swivel castors with parking brakes – enables easy movement of the crane on smooth and level surfaces. Stable steel construction with additional supports – provides resistance to twisting and maintains rigidity when working under load. Option to equip with a travelling trolley – increases flexibility when moving loads along the supporting beam. Simple and safe height adjustment – performed using a lever and double locking screws on each support. Construction and Technology The gantry crane is manufactured from durable steel profiles. The use of a 76 x 120 mm I-beam as the main supporting beam allows operation with professional chain hoists and travelling trolleys. The working width of 1750 mm is suitable for most manual hoists available on the market. Additional cross reinforcements and frame tensioners provide high structural rigidity, reducing the risk of deformation when operating at maximum load. The travelling wheels are made from materials resistant to wear and mechanical damage, ensuring quiet and smooth movement of the crane. Each wheel is equipped with a parking brake, allowing the device to be securely locked in position during operation. This enables the operator to focus on precise load positioning without the risk of unwanted crane movement. Safety and Ergonomics Height adjustment in an unloaded condition is carried out using a convenient lever and two locking screws on each support, eliminating the risk of accidental frame lowering. All structural elements have been designed with user safety in mind, ensuring both stability and precise positioning of the crane. This model does not include a hoist, giving the user complete freedom to select the appropriate lifting equipment according to the specific application. Both chain hoists and wire rope hoists can be used. Standard Equipment Steel frame with adjustable height Gedoridgrjpfx Afusbu 4 swivel castors with parking brakes Supporting beam made of 76 x 120 mm I-beam Cross reinforcements and frame tensioners Travelling trolley Technical Specifications Parameter Value Load capacity 1000 kg Height 2500–3600 mm Internal width 2300 mm I-beam size 76 x 120 mm Overall base width 2400 mm Top beam width 2550 mm Working width for hoist 1750 mm Supporting frame tensioners 4 pcs Supporting beam cross reinforcements 2 pcs Weight 142 kg Note: The gantry crane does not include a hoist – photos are for illustration purposes only.

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 760 mm, workpiece weight (max.): 12,000 kg, total height: 48,500 mm, total length: 85,800 mm, total width: 56,000 mm, overall weight: 20 kg, table length: 3,020 mm, table width: 2,400 mm, distance table center to spindle nose: 960 mm, rapid traverse Z-axis: 15 m/min, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 15 m/min, spindle nose: ISO 50, spindle speed (max.): 6,000 rpm, spindle speed (min.): 10 rpm, tool diameter: 127 mm, tool length: 350 mm, Equipment: documentation/manual, rotational speed infinitely variable, Gantry vertical machining centre "AWEA LP-3025" with HEIDENHAIN TNC 640 Gjdpfx Aerl Svrsfujbu

Condition: used, Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, picking trolleys, mobile shelves, tray trolleys, embroidery trolleys Gbodpfxerri S Dj Afueu -Transport trolley: Commission trolley, floor trolley -Tiers: 9 borders arranged diagonally -Border dimensions: see photos -Chassis: 4 swivel castors -Total dimensions: 1000/800/H1700 mm -Weight: 103 kg

Condition: good (used), The scope of delivery includes: 01x collision protection guard rail, new / used Material color: yellow / black / white Total height: 400 mm Total depth: 180 mm Clear width: 800 mm Consists of: 02x Sigma profile, used Material color: white Profile dimensions: C: 130 x 50 mm Clear width: 800 mm 02x L - collision protection corners, new Material color: yellow / black according to DIN standard Total height: 400 mm Leg length: 170 x 170 mm Material thickness: 5 mm Weight/piece: 6.10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The collision protection guard rail is delivered completely pre-assembled. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Gedpfxjvmz Ahj Afuobu General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.