Used Optimum Optidrill B23Pro for sale (468)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 6400 € 123.52 € 3000 x 1500 mm 850 mm 8000 kg 1544 kg 200 mm Hedowiricspfx Al Sol 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1190 € 1000 x 1000 mm 850 mm Hjdpfx Aewirg Usl Sjl 210 kg 25 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1490 € 1500 x 1000 mm 850 mm 344 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm Hodpswirg Isfx Al Sel - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, Year of construction: 2025, Screen printing drying racks, present a few rust defects (can de cleaned by metallic brush) - So big discounts applied. New units : to assemble Prix : 800€ (1 unit) 750€ (2 units) 700€ (3 units) 650€ (5 units) 600€ (10 units) Transport not included, to be added The screen printing or flatbed printing drying rack, a space-saving and really useful piece of equipment for printing professionals. Designed to meet the needs of screen printing and offset printing workshops. Hsdpfxoxqx Tbo Al Sjl Main features 50 grid drying racks, 70 cm x 100 cm. Dimensions movable screen drying rack: 70 cm x 100 cm, perfectly suited to a wide variety of flatbed printing media. 50 grids or layer for flatbed drying to dry a large volume of visuals. Outer size : 110 cm x 83 cm x 148 cm Robust drying trolley on wheels, offering optimum mobility and flexibility in your workshop.

Condition: new, cutting range for steel to 15.0 TS mm cutting range for steel to 10.0 QS mm capacity at 100% 25.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere voltage 230 V Air consumption 230 l/min. output Eingang 4.9 KW weight 8.0 kg range L-W-H 505 x 147 x 305 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure Hjdjxaavcjpfx Al Sjl . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut for carbon steel .. 15.0 mm Optimum cutting thickness carbon steel .. 10.0 mm Stainless steel .. 10.0 mm Aluminum .. 6.0 mm Copper .. 5.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, cutting range for steel to 12.0 TS mm cutting range for steel to 8.0 QS mm capacity at 100% 30.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere output Eingang 4.9 KW voltage 230 V weight 17.9 kg range L-W-H 480 x 210 x 340 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure Hedpfew U U Tgox Al Ssl . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut-off cut for carbon steel . 12.0 mm Optimum cutting thickness carbon steel .. 8.0 mm Stainless steel .. 8.0 mm Aluminum .. 4.0 mm Copper .. 3.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: good (used), machine/vehicle number: WMA18SZZ8GM685543, mileage: 195,000 km, power: 265 kW (360.30 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, air conditioning, differential lock, electric window regulation, power mirror, Technical information Engine capacity: 10.518 cc GVW: 19.120 kg Drivetrain Make of engine: MAN Hodpoyt A Txefx Al Sjl Axle configuration Front axle: Tyre size: 385/65R22.5; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70R22.5; Suspension: air suspension Rear axle 2: Tyre size: 315/70R22.5; Suspension: air suspension Interior Steering wheel placement: Left Condition Technical condition: good Visual appearance: good Other information Vehicle's outer dimensions: 10,15x2,54x4 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Cabin suspension - mechanical - Differential lock - Driver seat air-cushioned - Heated mirrors - PTO - Stereo = Remarks = The BLG road cleaner is suitable for use in emergencies and for performing preventive maintenance on specific road surfaces where a standard sweeper is not powerful enough. In Europe, for example, many roads are covered with ZOAB or other types of open concrete surfaces. Due to the open structure of these surfaces, dirt accumulates in the cavities. Other cleaning methods, such as sweeping or brushing, only “push” this dirt deeper into the cavities. This results in a very slippery road surface, especially in changing weather conditions. Because our road surface cleaner sprays the dirt loose under high pressure using dirt cutters and sucks everything up with the powerful fan, the draining effect of the road surface is maintained. This also makes the vehicle very suitable for effectively cleaning up oil and other serious contaminants such as paint. The advantages of the BLG road cleaner 2.5 m wide suction nozzle with two suction hoses Very powerful fan with a capacity of 20,000 m3/hour Hydrostatic drive for optimum ease of use Autonomous thanks to the use of water recycling The suction nozzles can be tilted independently Equipped with a coarse debris filter Pump section equipped with sound insulation Equipped with brush-in system and HD system For very intensive road cleaning, we have developed a powerful road cleaner that cleans using high-pressure and vacuum technology. With a water supply of approx. 9 m³ and the use of water recycling, it offers a very high degree of autonomy. The combined clean and dirty water tank is made of 4 mm thick stainless steel. The dirty tank is emptied via the rear cover, which is also made of stainless steel and opens upwards by means of two cylinders. The BekkerLaGram road cleaner can be found on industrial sites, motorways, airports, factory sites and much more.

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 415 mm, turning length: 850 mm, turning diameter: 390 mm, spindle bore: 105 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 1,980 mm, total length: 4,600 mm, total width: 1,900 mm, quill diameter: 100 mm, quill stroke: 120 mm, overall weight: 7,000 kg, bar passage: 90 mm, chuck outer diameter: 300 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: documentation/manual, max. turning diameter 390 mm Z-axis travel: 950 mm max. spindle speed: 2000 rpm AC spindle motor SIEMENS (cont./15min) 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Including accessories a. o: SAUTER 12-station turret VDI-40 Trifix holder for driven tools C-axis with spindle clamping and stabilization Wide and stable flat guides 45° inclined bed for optimum chip fall Hinged belt chip conveyor with chip bucket 3-jaw Kitagawa power chuck ø 300 mm Tool measurement can be swiveled in manually Hedpfx Alsfk Et As Sel Hydraulic tailstock manually adjustable with programmable tailstock quill Coolant unit with powerful pump (4 bar) Rittal filter fan on the control cabinet

Condition: like new (used), Year of construction: 2022, Fully automatic straightening center for bandsaws we are selling it after little use because we had a generational change in the company and in the course of this, converted the entire machine park to Iseli. Previously we had the predecessor model for many years and were very satisfied. In one setup, automatic and uncompromising machining of all bandsaw blades Leveling, tensioning, back straightening, maintaining rest period Evenly processed bandsaw blades Better cutting speed, reduced cutting loss Less specialist staff, better quality in the sharpening room Technical data: Connection values: Electrical: 400 V 50 Hz or special voltages Compressed air: 1/4″ gas thread Air pressure: minimum 5 bar, 0.7 liter per stroke Saw blade dimension: Blade width: 60 mm to 305 mm / 60 mm to 381 mm, special up to 420 mm Blade length: from 4200 mm Processing time: Saw blade 206 mm x 10 m approx. 30 min Leveling tolerance: 0.02 mm - 0.03 mm Hsdpfx Aljwrx Rro Sel Tension tolerance: 0.02 mm compared to the calculated tension curve or the stored optimum curves Tension: all desired tension profiles adjustable Control: PLC control Dimensions: Length without deflection: 2200 mm Height: 1540 mm Width: 1115 mm Working height: 1110 mm Weight: 1120 kg The machine can be inspected on site!

Condition: used, functionality: limited functionality, machine/vehicle number: WFDFLT33902026418, empty load weight: 7,156 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2019, next inspection (TÜV): 03/2026, total length: 15,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5*, color: black, Year of construction: 2019, The images are archive pictures! Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, X-tra Long, with an internal length of 14,980 mm, outer frame slightly slanted with "Load-Lock profile" for securing lashing straps. 24 t, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with shim compensation. One wheel chock with holder, aluminum side underrun protection, galvanized steel rear underrun protection, quarter-shell mudguards in front of the 1st axle and behind each axle, "Heavy Blocker" rear cross ramming protection + "roller buffer side impact protection." Pair of ferry lashing rings, yellow marked, heavy-duty pallet stops on both sides, approx. 15-20 mm high, with lashing option every 200 mm, loading height reduced by approx. 15-20 mm, spare wheel holder for 1 spare wheel, with wheel mounting kit, spare wheel of same brand and specification as main tires, steel rim, plastic toolbox, with drawer and intermediate shelf, width=650 / height=520 / depth=670 mm, lockable with padlock. Axles & Suspension: BPW disc brake axles, "axles/chassis laser measured" to reduce tire wear and fuel consumption, hubodometer/kilometer counter, air suspension, air spring diameter 360 mm, total lift approx. 260 mm. Brake System: 2-line compressed air brake system, spring-loaded parking brake, 2 non-swappable coupling heads at the front without connection line, EBS by Knorr, electronic braking system with EBS socket at front, no connection cable. Wheels & Tires: 435/50 R19.5" steel rims, factory silver, ET 120. Electrics: 24 volt, 4 x 3-chamber LED taillights with resistors, + 2 round combination reverse/fog lights in LED, yellow LED side lighting. License plate lighting in LED. 1 x 15-pin socket at the front, without interconnection cable. Floor: Approx. 30 mm thick phenolic coated plywood, cross joints with omega inserts, on longitudinal subframe for high point load capacity for forklift axle loads up to max. 7,100 kg. Hedpoy Efzksfx Al Sol Superstructure: Mounted superstructure. Front bulkhead / corner posts at the front have signs of use. 2,580 mm high, volume version steel corner posts, side curtain release device at bulkhead, "Crash Blocker"—internal steel ramming guard approx. 140 mm high at the bottom. Center posts: Pair of sliding posts adjustable over the entire length, with 7 multiple stake pockets. Insert slats: Rows of aluminum V-insert slats incomplete. Fliegl "I-Lock" integrated door locking mechanism. Tarpaulin shows signs of use, with welded horizontal and vertical straps. Roof: Sliding roof, rear end liftable, with roof sliding from rear to front, L- type, tarpaulin color: white. Hydraulic lift roof on both sides, one cylinder with hand pump per post, can be lifted by 400 mm, front with 3 driving positions: inside height approx. 2,900 mm / 2,950 mm / 3,000 mm, set to approx. 2,950 mm. Anti-ice system with 1 hose in the middle, automatic forced venting via brake light (not available in combination with sliding roof openable from the front). Optimum rain gutter at the rear, top of the end hoop, above the doors. Operating instructions: Special permit required if total towing length exceeds 16,500 mm. Approvals / Certificates: Load securing certificate according to EN 12642 XL (valid only with 4 rows of aluminum slats), additional DC 9.5 certificate, heavy-duty pallet stops on both sides, approx. 25 mm high, loading height reduced by approx. 25 mm. The images are ar

Condition: new, Year of construction: 2026, overall weight: 420 kg, total length: 28,650 mm, total width: 15,000 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also offer you a suitable drive-on ramp, a photo cell for black object detection, or the appropriate machine film! About this model: Our Profiline is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby reliably eliminating the “human factor”. The electromagnetic brake allows you to precisely set and store the film tension at each stage (bottom wrap, upward wrap, top wrap, downward wrap) within the programs. Within each program, you can additionally specify the speed of the film carriage and turntable. You can also store head wraps, bottom wraps, and the film overlap at the end of the pallet for each program. This allows you to create individual programs for every packing pattern in order to achieve optimum wrapping results every time. The programs can be password-protected, so the operator can only select from the preset programs. Hjdpfx Aljy Drb Uj Sel With a weight of 420 kg, this model is designed for loads up to 1200 kg (optionally up to 2000 kg). Our Profiline is equipped with a 1500 mm turntable and can wrap pallets up to 2500 mm in height as standard. Automatic pallet detection (via photo cell) is standard, as are adjustable head and bottom wraps. If the wrapper needs to be relocated, it can be easily lifted and moved using integrated forklift slots. This model is our recommendation if you require a professional and robust pallet wrapper for higher volumes, which can be optimally adapted to your needs. Do you need a larger turntable, a taller mast, film pre-stretching, or an automatic film cutting system? With this machine, almost anything is possible! We are happy to configure this machine as a new unit with exactly the options you require. About us: We believe that business is conducted between people! A supplier delivers the goods you ordered—a partner does more: they help you find the best solution, support you in achieving your goals, and assist you in overcoming problems and challenges. This is our conviction. For over 40 years and in the 4th generation, we have been the partner for SMEs in all matters relating to “stretching and adhesive solutions.” On request, we are happy to advise you as to which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: good (used), Year of construction: 1997, functionality: fully functional, clear span: 19,000 mm, load capacity: 300 kg, For sale is a used Mecalux mezzanine storage system / multi-tier racking installation, consisting of frame racks with two walk-on mezzanine levels, stairs, and peripheral handrails. The system makes optimum use of the hall height and is ideal for carton storage, small parts storage, order picking, or light assembly work. Technical data: • Manufacturer: Mecalux • Year of manufacture: 1997 (per nameplate) Hsdpsx Dtuajfx Al Sjl • Type: 3-level racking system with 2 mezzanine floors • Footprint: approx. 19.0 m × 7.8 m ≈ 148 m² Levels / Surfaces • Ground floor (rack level): • Base area approx. 19.0 × 7.8 m (≈ 148 m² storage area) • Clear usable height below 1st mezzanine: approx. 3.10 m • 1st upper floor / 1st mezzanine: • Gross area approx. 19.0 × 7.8 m ≈ 148 m² • Less stairwell area (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 142 m² • Clear headroom above: approx. 2.70 m, in areas with braces (approx. 0.50 m) approx. 2.30 m • 2nd upper floor / 2nd mezzanine: • Depth mostly approx. 5.90 m, width approx. 19.0 m • Gross area approx. 112 m² • Less stairwell area (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 109 m² ➡️ Total usable area of both mezzanines: approx. 399 m² Stairs & Handrails • 2 × stairs, each • Width approx. 1.0 m • Length approx. 6.0 m • Stable steel steps with anti-slip markings • Handrails on both sides • Continuous handrails on the mezzanine levels • Additional safety by chains at access points Decking & Load Capacity • Mezzanine decking: robust wooden flooring / panel covering • Permissible load per nameplate: 300 kg/m² Lighting • Areas above the mezzanines are equipped with lighting, so the mezzanine levels are already illuminated. Condition • Very well-maintained, lightly used condition • Despite its 1997 year of manufacture, the system appears nearly as new • Mainly just dust on the floors, no visible structural damage to frames, handrails, or stairs • Nameplate present, data legible Location & Handling • Location: 59227 Ahlen • Availability: by arrangement, short-term possible • Viewing: possible by prior appointment Disassembly & Transport • Disassembly by the buyer. • Support with disassembly and loading can be arranged for an extra charge upon agreement. • Transport to be organized by the buyer.

Condition: excellent (used), Year of construction: 2020, For inquiries: Zoltán Utasi +36 30 205 7380 158.000 running metres BASE MACHINE AURIGA 1308XL TECHNICAL DATA Edge banding machine for edgebanding and finishing of sheet materials Edge thickness of roll material: 0.4-3mm (depending on material) Edge thickness of strip material: 0.4-8mm (depending on material) Edge cross-section: max. 6x42mm Edge height: max. 65mm Workpiece thickness: 8-60mm (restrictions possible for individual units) Workpiece width: min.65mm Workpiece length: min.160mm (without corner copying 1832) Workpiece length: min.180mm Feed speed: 10m/min. MACHINE OPERATION Edge Control 19 with 18.5" touchscreen colour monitor 16:9 Powerful control system with extremely simple operation for efficient machine set-up and changeover. Rotating and swivelling control panel at eye level Motorised pressure bridge adjustment iTronic - Adaptive pressure and adhesive quantity control Automatic, programme-dependent fine adjustment Optimum adaptation to edge thickness, edge materials and adhesive types guarantees the best processing results Automation package consisting of - Automatic glue quantity control - adaptive snipping knife - adaptive printing unit incl. residual adhesive quantity display incl. fully automatic PUR flushing routine Premilling unit FG201 with 2 milling heads for joining the panel edge 1x counter-rotating, 1xsynchronised, Milling cutter, diamond Ø70x64x30 mm,Z2+2 Edge feeder 1903 automatic transport of rolls and strips max. loading capacity: 40 mm Glu Jet GJ301 glue application system (2,3kW,50Hz) Automatic glue height adjustment Glu Jet hybrid technology for EVA and PUR adhesives Adhesives in cartridge and granulate form for neutral and coloured adhesives Hedpfx Aljxayvpo Sol Hopper for 1.4 kg cartridges (4 cartridges) Hopper for 1.5 kg granulate Pneumatic pressure unit 1912-3 First roller driven with pneumatic immersion control, 2 conical holding pressure rollers Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatic swivelling 0/10° Dust extraction hoods for end trimming unit 1918 Multifunctional trimming unit 1827 MOT4 for trimming the top and bottom longitudinal edge with motorised positioning of the horizontal tracing shoes with motorised positioning of the trimming motors in axial direction incl. pneumatic adjustment (top and bottom separately) for flush-radius routing incl. blow nozzles - Flush cutting unit - Radius - Tilt the chamfer 0 - 15°, manually (with max. edge thickness 6 mm) Pneumatic swivelling device for trimming unit 1827 MOT4 Pneumatic swivelling to bevel 15° from the control unit Pneumatic vertical tracer rollers Adjustment of the vertical tracer roller by 0.1 mm for routing with edge overhang Corner rounding unit (1x0,35kW,200Hz,12000min-1) Corner copying function up to 3 mm edge thickness Workpiece thickness: 12 - 60 mm, with DIA tool R=2mm Scraper unit 1929 MOT4 incl. high-gloss package with motorised adjustment of the horizontal feeler rollers, incl. pneumatic adjustment (separate top and bottom) Surface scraper FK701 With pre- and post-scraping for removing the adhesive residue along the complete panel length for a clean glue joint. Buffing unit 1940 (2 x 0,09 kW, 50 / 60 Hz, 1400 min-1) For finishing and polishing edges, with 2 textile discs, swivelling 0 - 5°

Condition: excellent (used), Year of construction: 2018, Marel 2730 salmon filleting machine with back and belly trim The Marel MS 2730 is an automated salmon filleting machine designed to maximize yield and throughput, capable of processing up to 25 fish per minute. It features automated size adjustments via a touch screen, includes advanced back and belly trimming, and is built for easy operation and hygiene. The machine accommodates salmon from 1.5 to 8 kg, with optional kits available for smaller fish, and is part of Marel's larger processing solutions. Key Features and Capabilities Automated Processing: The MS 2730 automatically adjusts to different fish sizes and uses electronically controlled tools to maintain high quality and consistent results. High Throughput: It can fillet up to 25 salmon per minute, increasing production efficiency. Improved Yield: The design includes a set of circular knives that capture meat near the center bone, significantly increasing fillet yield. User-Friendly Operation: A multilingual color touch screen provides easy and safe control over all operations, with pre-programmed settings for different fish sizes. Compact Design: The machine has a compact footprint, allowing for easier integration into existing processing lines. Technical Specifications Fish Size: Standard 1.5 to 8 kg, with a kit available for fish as small as 500 g. Water Consumption: Approximately 15 liters per minute. Power Requirements: Operates on 3 x 400V and requires a 3.3 kW power supply. Benefits for Processors Efficiency: Streamlines workflow with automated adjustments and high-speed processing. Quality & Yield: Produces high-quality fillets by including more meat and minimizing waste. Flexibility: Accommodates various fish sizes and is part of a larger, integrated system for comprehensive processing solutions. Cost-Effectiveness: Optimized water consumption reduces operating costs. The fish is fed into the machine belly down, which makes the infeed much easier and faster. An additional set of circular knives cuts the fish from vent to tail. This cut raises yield, as the meat close to the center bone is included in the fillets. For the belly bone cut, 4 sets of finger pressures secure maximum control of the fish and enable optimum cutting of both pre-rigor and post-rigor fillets. The result is high-quality fillets with higher yield and output. The MS 2730 automatically adjusts to various fish sizes, so there is no need to adjust once the program has been switched on. The MS2730 can process up to 25 fish per minute, depending on the length of the fish. With the built-in system for measuring the fish´s profile and size, the electronically controlled cutting tools can automatically adjust the filleting program to the fish´s size and shape. The result is higher throughput, quality and yield depending on trim specifications. With the optional small fish kit installed, the MS 2730 is capable of filleting fish weighing from 500 g up to 4 kg. Manufacturer: Marel Model: MS 2730 Hodpfxey Aul Te Al Sjl Year: 2018 Capacity: 25 fish per minute Fish size: 1,5-8 kg. Power Supply: 400/230V / 50 Hz Power: 5,5 kW Water consumption: 15 liter/min. Machine dimensions (LxWxH):  3.150x1.035x1.980 mm Machine weight: 1.000 kg.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Hsdshbu E Hopfx Al Ssl Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, GIGANT / Mosca SoniXs-TR-6 Base – Fully Automatic Strapping Machine Professional Mosca SoniXs-TR-6 Base – the proven flagship from the German market leader in fully automatic strapping technology. Up to 35 packages/min with a 600 × 600 mm frame size. TECHNICAL DATA • Model: SoniXs-TR-6 Base • Manufacturer: Mosca GmbH (Germany) • Year of manufacture: 2016 • Performance: up to 35 packages/min • Frame size: 600 × 600 mm • Conveyor speed: 0.1 – 1.0 m/s (infinitely variable) Hodey Eqquepfx Al Sjl • Strapping: PP straps, width 5–12 mm • Control: MSCB-1 with digital control panel • Working height: approx. 850 mm EQUIPMENT & FEATURES • SoniXs ultrasonic technology – low emissions & energy-efficient • Standard-6 strap path system – tool-free maintenance • Pneumatic actuators for optimum strapping process • CE marked ex-works – ready for immediate use • Modular concept – can be expanded to tandem machine • Cost-efficient base version with proven mechanics • Optimized chassis – flexible positioning • Two separate control cabinets for extended applications • Pneumatic hold-down device available • Stop options for various applications • Volt-free contacts for line integration • Four swivel castors with locking brake SoniXs Ultrasonic Technology: The patented Mosca sealing system operates without warm-up time, requires minimal maintenance, and produces reliable, strong seals – unique in the industry. APPLICATION AREAS Perfect for: logistics, shipping departments, e-commerce, wholesalers, printing houses, pharmaceutical and food industries. Ideal for cartons, packages, and other packaging units requiring reliable strapping for transport. Application areas: high-throughput environments where process reliability and uptime are crucial. ABOUT MOSCA Mosca from Waldbrunn is Germany’s market leader in strapping technology and has been synonymous with the highest quality and reliability for decades. The SoniXs series is the flagship of fully automatic strapping machines. CONDITION & AVAILABILITY Fully functional, regularly serviced, and well maintained. Normal wear consistent with age, technically in excellent condition. Ready for immediate use – no hidden defects. LOCATION & TRANSPORT Location: Central warehouse Auction House Köck, 6178 Unterperfuss, Austria. Collection by buyer or shipping by freight carrier upon agreement. Transport costs on request (depending on destination). Viewing and test run possible by appointment. All information without guarantee. Subject to errors and typographical mistakes.

Condition: used, Year of construction: 2026, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Hodpfxey D E Tdj Al Sol

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 179057653, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 axes travel (working stroke): 335/289 mm / Rapid traverse in X: 30 m/min - Z1/Z2 axes travel: 560/494 mm / Rapid traverse in Z: 30 m/min - Fully enclosed with automatic door opening, supporting manual or automatic loading Main Spindle - Spindle according to DIN 55026: Size A6 - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 23 / 18 kW - Torque at 100% / 40% duty cycle: 146 / 115 Nm Hedpfxsxxinfe Al Sjl Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Toolholder with Powered Tools - Cylindrical shank holders per DIN 69880: 8 - VDI40 - Max. tool length: 130 mm - Number of positions: 1 x 8 - Max. speed: 4,500 rpm - Max. torque at 10% / 100% duty cycle: 27 Nm / 14 Nm Turret Configuration X2/Z2: Toolholder with Powered Tools - X-HOT unit for polygonal turning, max. eccentricity (stroke): 8 mm - X-HOT tool clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3,000 mm (6,477 mm with chip conveyor), Width = 3,000 mm, Height = 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design for optimum chip removal, suitable for manual or automated loading/unloading - Siemens 840D control, NC1 and NC2 axes - High precision: Positioning accuracy in X, Z axes ±0.002 mm (Heidenhain linear scales) - Powerful main spindle with a wide speed range - Live tooling extends machining capabilities to drilling and milling - Tool life monitoring - Chip conveyor: Knoll - Coolant system filtration up to 40 bar: Knoll FKA/1400 - Workpiece presence detection with low pressure sensor - ROBOT AUTOMATION INFRASTRUCTURE INSTALLED - Fully enclosed work area; integrated lighting - Documentation: available both electronically and as hard copy Machine status: Not operational - Missing: valve for emulsion circuit and inductive sensors

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 179056920, Technical characteristics: Hsdpfoxwmf Sex Al Ssl Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance spindle nose to tailstock origin: 639 mm - X1/X2 axis stroke (effective travel): 335/289 mm / Rapid traverse X: 30 m/min - Z1/Z2 axis stroke: 560/494 mm / Rapid traverse Z: 30 m/min - Standard fully enclosed cabin with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface according to DIN 55026: Size A6 - Max. spindle speed: 4,500 rpm - Spindle power at 100%/40% duty cycle: 23/18 kW - Spindle torque at 100%/40% duty cycle: 146/115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Tool Turret with Driven Tools - Tool mounts cylindrical shank to DIN 69880: 8 × VDI 40 - Max. tool length: 130 mm - Number of stations: 8 - Max. turret speed: 4,500 rpm - Max. torque at 10% duty cycle: 27 Nm; at 100%: 14 Nm Turret Configuration X2/Z2: Tool Holder with Driven Tools - X-HOT unit for polygon turning, max. eccentricity (stroke): 8 mm - X-HOT tool holder interface: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length 3,000 mm (6,477 mm with chip conveyor), Width 3,000 mm, Height 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design: Optimum chip disposal, manual or automatic loading/unloading - Control: Siemens 840D for NC1 and NC2 - High precision: Positioning accuracy X/Z axes ±0.002 mm (Heidenhain absolute linear scales) - Powerful main spindle with wide speed range - Driven tools expand application range to include drilling and milling - Tool life monitoring - Chip conveyor coolant: Knoll - Coolant filtration unit up to 40 bar: Knoll FKA/1400 - Part detection system with low air pressure sensor - AUTOMATION INFRASTRUCTURE FOR ROBOT INSTALLED - Fully enclosed work area, work light included - Documentation: Available electronically and as printed manual Machine status: In working condition.

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: LZ1R0725, Technical specifications: Work Area - Maximum turning diameter: 89 mm - Maximum workpiece length: 80 mm - Chuck size: 152 mm hydraulic - Maximum workpiece weight: 0.7 kg (per piece, 2 pieces) - X-axis travel: 245 mm / Rapid traverse X: 20 m/min - Z-axis travel: 240 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: ASA 6 - Maximum speed: 60–6000 rpm - Power at 100% duty cycle: 7.5 / 5.5 kW Tool Turret with Motorised Tools - Tool interface: 20 mm square / 25 mm hole diameter - Number of positions: 12-station lower turret, 6 driven stations - Max. speed: 4500 rpm, Milling motor power: 4.5 kW Hsdpfx Aoxxkn Tel Sjl - Turret index time: 0.2 sec Electrical Equipment - Operating voltage: 200V (3-phase) - Connected load: 21 kVA Dimensions - Machine size (L×W×H): 2,100 × 1,555 × 1,680 mm - Weight: 4000 kg Main Features and Capabilities - Horizontal layout: Optimum chip evacuation, parts catcher, custom-made parts conveyor belt - CNC control: Fanuc Series 21i TB - Chip conveyor Machine Status: NOT WORKING - Servo drive defective - Main spindle motor defective

Condition: new, functionality: fully functional, Year of construction: 2026, The FM230 extractor is characterized by small dimensions and at the same time high efficiency of up to 1000 m3/h. Standardly equipped with a metal rotor and a running base. Great value for money, which makes it an uncompromising device in its category. Many years of effort by our team resulted in the creation of a multi-patch metal impeller of the WhirlWind series, which, together with the massive metal casing, constitutes the heart of the extraction system. The vacuum air draft perfectly sucks excess sawdust generated during mechanical processing of wood, produced during machine operation. The massive construction of the extraction unit has been enriched with additional supports in the base to ensure stable and vibration-free operation of the device. The entire structure has been reinforced with appropriately thick supports that keep the chute cylinders and the weight of waste bags in the right position on a massive base. Hodpfjvu Az Uex Al Ssl An additional advantage is the use of a flexible and durable gasket placed in a critical place to improve the tightness of the entire system. As standard, we equip the extractors with canvas bags (filter and waste) and additional disposable, durable plastic waste bags. Flexible metal bands ensure long-term trouble-free operation of bag replacement. The use of swivel and ball-bearing wheels ensures efficient movement of the extractor around the facility. Machine characteristics The perfect machine for both professionals and amateur carpenters. Optimum extraction performance works perfectly with machines such as: Planers Planers Thickness planers Milling machines Technical data ENGINE POWER 0.75 kW SUCTION PERFORMANCE 1000 m3/h VOLUME OF BAGS 60L NUMBER OF BAGS 2 DIAMETER OF SUCTION PIPE 100mm HEIGHT 1500mm WIDTH 420mm LENGTH 600mm VOLTAGE/FREQUENCY 230V WEIGHT 27kg

Condition: new, Year of construction: 2026, The Cormak M200S sander is a professional tool with high performance and precision. Equipped with a powerful drive motor, it provides fast and efficient grinding of various materials. The rotor design based on ball bearings ensures motor reliability and quiet operation. Plastic guards protect against sparks. This is a versatile tool that is easy to use thanks to the speed control and ergonomic handle. Ideal for professionals and hobbyists. Hodpfx Alovlkttj Sel Features of the M200S disc grinder The Cormak M200S grinder is a professional grinding tool that offers an excellent combination of high performance, precision and durability. Thanks to the rotor design based on ball bearings, this grinder guarantees motor reliability and quiet operation, which is important for both intensive use in the workshop and in domestic applications. The powerful drive motor of the Cormak M200S sander is equipped with high torque, which translates into efficient material removal and a fast surface finish. The number of revolutions provides the optimum sanding speed for a variety of materials. The motor power of 0.9 kW allows efficient material removal and rapid achievement of the desired results. Designed for use with 400 volts, ensuring stable power supply and efficient operation. Regardless of the type of material, be it wood, metal or plastic, this sander will meet all requirements. Equipped with a 200x32 mm fi sanding disc, it enables larger surfaces to be sanded efficiently. An important aspect that contributes to work safety is the Cormak M200S sander's plastic guards. As well as providing protection from sparks, the guards are lightweight yet robust, making them easy to manoeuvre and reducing operator fatigue. In addition, the intuitive control panel provides convenience and ease of use. If you are looking for a professional sanding tool that offers reliability, high performance and precision, the Cormak M200S sander is an excellent choice. Its robust construction, powerful motor, protective guards and ability to connect a dust extraction system make it an indispensable tool in the workshop, carpentry shop or during renovation work. Check the specifications and compare prices to find the best deal for your needs. Technical specifications of the M200S disc sander SIZING DIAGRAM 200 x 32 mm disc or grinding wheel opening 32 mm DISC GRANULATION K 36 / K 60 RPM NUMBER 2850 rpm MOTOR POWER S1 0,9 kW MOTOR POWER S6 1,5 kW VOLTAGE 400 V DIMENSIONS 520x300x1130 mm WEIGHT 26 kg

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm Hjdpfxsfgyics Al Sjl total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Year of construction: 2026, condition: new, functionality: fully functional, total length: 640 mm, total width: 735 mm, total height: 170 mm, machine/vehicle number: 2026, Stainless steel pedestal for bread presses / dough dividing machines suitable for all gänigen bread presses massive art work equipped with 2 to easy lifting with the pallet truck Hjdpfx Ajd Egxfol Ssl Stainless steel for optimum cleaning Dimensions: 735 x 640 x 170 mm, WxDxH

Condition: used, machine/vehicle number: WFDFLT21802026297, empty load weight: 2,872 kg, maximum load weight: 15,128 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, tire size: 385/65 r22,5, Year of construction: 2019, Further information Welded fine-grained steel construction, front stop, longitudinally adjustable and foldable, removable pair of guide rollers, front and rear, Swap Guard - swap body guide, in front of and behind each container lock, 4 container locks with sturdy outriggers on 20-base for swap bodies 7.15 and 7.45, turntable with strong ball bearing slewing ring, wheel chocks with holder, Aluminum side collision protection, side collision protection set inwards for optimum clearance to the swap body supports, steel underride guard, underride guard shortened for optimum clearance to the swap body supports, lighting system mounted in a protected position, quarter-shell mudguards at the front and half-shell mudguards at the rear, without impact protection, spare wheel holder in basket design, plastic toolbox Drawbar (L = 2,200 mm) with tested 40 mm drawbar eye, drawbar length, drawbar height adjustment via spring SAF disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction in tire wear and fuel consumption, air suspension 2-line compressed air brake systemColored line routing for easy servicing, air supply 208 liters, spring-loaded parking brake, 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable, )Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS!) with lifting & lowering valve, holding function in lowering / lifting position, brake release function via button on the vehicle next to H & S valve, for releasing the brake when coupled, EBS power supply must be guaranteed! 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable, additional LED work light(s) at the rear, switched via reversing light, LED work light at the front centered between the beams, shining to the rear, switched via reversing light Hjdpfxoi Ri Dzo Al Ssl Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-line license plate holder, warning sign according to ECE - 70, ADR warning sign at the rear, hinged, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear