Used Overbeck Flap Element Passage Flap for sale (4,876)

Condition: new, * IMMEDIATELY AVAILABLE * Tandem trailer with 30mm steel sheet sandwich body, braked, 2 lashing rails, 8 lashing rings Technical data: • Type: New vehicle • TÜV: New / 2 years • Availability: IMMEDIATE! • Permissible total weight: 2,700 kg • Unladen weight: approx. 960 kg • Payload: approx. 1,740 kg • Internal dimensions: 405 x 204 x 205 cm (L x W x H) • Overall external dimensions: 563 x 255 x 269 cm (L x W x H) • Loading edge height: approx. 59 cm • Tyres: 185R14C steel rims • Brakes: yes • Jockey wheel: yes Cgedpfx Adjyivcle Njt • 100 km/h approval: available at extra cost • incl. vehicle documents Body: • Floor: Finnish birch multiplex • Sidewalls: 30mm steel sheet sandwich • Roof: 25mm GRP sandwich • Chassis: ALKO rubber suspension axle • Number of lashing rings: 8 (750kg/daN each) • Rear door: Yes, double-wing • Rear flap: No • Rear flap material: - • Rear door/flap function: Rotary bolt lock • Rear door/flap passage: - • Interior lighting: optional at extra cost • Support legs: optional at extra cost • Overrun device & brake: yes • Frame/chassis: V-drawbar, hot-dip galvanized • Lighting plug: 13-pin • Approval: COC papers Standard equipment: • Heavy-duty V-drawbar, hot-dip galvanized • Tandem axle • ALKO overrun device • Floor plate made of Finnish multiplex • Side walls made of extremely robust 30mm steel sheet sandwich • Roof made of 25mm GRP sandwich • Double rear doors • Doors with special sealing profiles made of hard/soft plastic • Stainless steel rotary bolt lock and galvanized hinges • Rear frame and edging profiles made of special aluminium profiles • 8 lashing points in the floor, lashing force 750 kg per point • Trailer equipped with lashing rails on both sides, preinstalled • Automatic jockey wheel • Reverse automatic • Plastic mudguards • 13-pin plug • Reversing lights • Large dimension safety lighting • Integrated rear fog light • Structure splash-proof • Approval documents: COC papers Optional accessories - inquire if interested: • Anti-theft device • Rear support legs • 100 km/h approval with shock absorbers • Side door • Motorcycle wheel chocks, • Motorcycle rails, • Motorcycle tie-down straps, • Lashing straps • Additional lashing rings • Additional slot-hole rails for ratchet straps & locking bars • Stick rail with rubber coating for ratchet straps & locking bars • Locking bars (steel or aluminium) • Interior lighting • Reversing work lights • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing possible - Nationwide delivery available - All prices include VAT - Vehicle registration document dispatch in advance possible or transfer licence plates (Germany) can be provided - Export plates including customs declaration possible Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been a specialist dealer & repair workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Subject to errors, omissions, and prior sale -

Condition: used, mileage: 74,967 km, power: 88 kW (119.65 HP), first registration: 04/2019, fuel type: gasoline, empty load weight: 1,995 kg, maximum load weight: 415 kg, overall weight: 2,410 kg, next inspection (TÜV): 11/2025, gearing type: mechanical, emission class: euro6, loading space length: 2,400 mm, loading space width: 1,850 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, Net price € 52,500.00 plus 19% VAT We offer you customized lightweight box bodies on new or used chassis in various body lengths. The body and interior fittings are always customized to your individual requirements, from function to design. The sales body and interior fittings are NEW. Sales hatch on the right, rear running board, LED lights, reversing camera, non-slip industrial floor R11, driving license class B, 2-seater. Box body interior dimensions WDH 2400 x 1850 x 2000 mm Side flap 2185 x 1400 mm Gross vehicle weight 2,410 kg Unladen weight 1,995 kg Payload 415 kg Interior fittings Left-hand side: Double sink with shelf incl. fresh and waste water tank Gas cylinder cupboard for 2 x 11 kg, pressure regulator, gas pipe and gas test certificate Underframe for table-top appliances Cedpfx Adst A A R Ie Nsgt Gas griddle plate Gas fryer Neutral element with GN drawer All appliances are interchangeable! Wall-mounted extractor hood incl. heat protection wall, speed regulator, flame protection filter, grease drain tap. Right-hand side: Serving table with stainless steel worktop Cooling attachment for 5x GN ¼ Undercounter refrigerator with 2 x glass hinged door 185 L Undercounter refrigerator with 1 x glass hinged door 118 L Further equipment: Shelf above the sales flap, folding bag shelf at the sales opening. sales opening. 1 LED panel on the ceiling and 2 LED spotlights above the sales counter. Electrical installation 380 Volt/16A switchable to 230 Volt/16A, RCD, 16 ampere fuse with acceptance, 5 double sockets, hygiene package, fire protection package. Net price € 52,500.00 plus 19% VAT

Condition: new, Year of construction: 2026, Main advantages: - The CORMAK GOLIAT 660 x 4000 universal lathe can be used for many tasks, such as turning internal and external surfaces, cones, polishing, metric, inch modular and DP threading, drilling and broaching. - The solid cast iron bed construction ensures maximum vibration reduction. Additionally, the bed is hardened and precisely ground. The device bed is extremely resistant to twisting and does not vibrate, which is the basic condition for precise turning. - Central feed switching system, lead screw and feed shaft for threading - The digital readout works in (3) three axes of movement: longitudinal, transverse, upper slide. The processed electronic signal from the optical rulers visualizes the obtained values ​​from movements along the axes on the digital screen. - The lathe is equipped with a high-quality, reinforced spindle bearing system. Modern main spindle bearing with ball bearings - Optimal work results are ensured by a large spindle passage of 105 mm, a 4000 mm center spacing, a 3-jaw lathe chuck of 320 mm, and a powerful 7.5 kW engine. - The rapid longitudinal and transverse feed system significantly shortens the machining time and increases productivity. - Hardened and ground gears in the spindle gear - ensures long-term stability of work. - Equipped with a lead screw and a feed shaft for threading, automatic longitudinal and transverse feed. - Easy adjustment of the spindle speed and automatic feed from the ergonomic control panel on the gear. - Possibility of machining a wide range of threads without the need to replace the change wheels in the guitar. Wide range of threads: metric (22) 1 - 14 mm, inch (25) 2-28 T.P.I, modular (18) 0.5-7 M.P., D.P. thread (24) 4-56 D.P. Turning right and left threads. Codpjvw Abgsfx Ad Njgt - Thread turning clock designed for accurate counting of turns. The function is to save time so that in several passes you can unscrew the lead screw nut to manually quickly return the support to its original position. - The bed has a replaceable bridge for turning larger elements, e.g. a disc. This lathe model allows for machining with a maximum diameter of 870 mm with the bridge removed. Technical data Max. turning diameter over bed Ø660 mm Max. turning diameter over support Ø420 mm Max. turning diameter in bridge slot Ø870 mm Slot length 240 mm Centre spacing 4000 mm Max. turning length 3950 mm Spindle bore Ø105 mm Spindle taper diameter and angle Ø113 mm 1:20 Spindle nose D1-8 CAMLOCK Spindle speeds 12 speeds (36-1600 rpm) Number and range of longitudinal feeds 65 (0.063-2.52 mm/rev.) Number and range of cross feeds 65 (0.027-1.07 mm/rev.) Metric thread 22 (1-14mm) Inch thread 25 (28-2 TPI-pitches per inch) Modular thread 18 (0.5-7mm) DP thread 24 (56-4 DP) Rapid longitudinal feed 4.5 m/min. Rapid cross feed 1.9 m/min. Lead screw pitch 12 mm Spindle axis distance from tool surface 28 mm Tool dimension 25x25 mm Max. top slide travel 145 mm Max. cross slide travel 380 mm Tailstock quill diameter 75 mm Tailstock taper MT5 Max. tailstock quill travel 150 mm Tailstock cross travel ±15 mm Main motor S1/S6 7.5/9 kW / 400V Rapid feed motor 250W Coolant pump 60W, 25 L/min. Dimensions L/W/H 5500 x 1100 x 1450 mm Weight 5 200 kg

Condition: new, Year of construction: 2026, Industrial metal lathe CORMAK TORNADO 460x1500 - 2x larger casting and solid cast iron bed construction, equipped with a 12-speed gearbox with a powerful 5.5 kW/400V induction motor - maximum torque, large spindle passage 82 mm. Main advantages: - Versatile applications: The lathe is ideal for various tasks, such as turning internal and external surfaces, cones, metric, inch, modular and DP threading, polishing, drilling and broaching. - Stable construction: The 300 mm wide cast iron bed has been hardened and precisely ground, which ensures high vibration reduction and stable working conditions even under heavy loads. - Digital precision: The device is equipped with a digital readout on two axes (longitudinal, transverse), which visualizes the exact values ​​of shifts on the screen thanks to optical measuring lines. - High-quality spindle: Reinforced bearing system in the spindle and large passage of 82 mm guarantee optimum efficiency during work. The set also includes a 3-jaw lathe chuck with a diameter of 250 mm and a 4-jaw chuck with a diameter of 320 mm, a 5.5 kW motor. - Efficiency and productivity: The rapid longitudinal and transverse feed system on the joystick significantly shortens the machining time, and the hardened and ground gears in the spindle gear ensure durability and reliability for years. - Wide possibilities of threading: Thanks to the threading function (metric, inch, modular and DP), right and left, and the possibility of changing parameters without the need to replace gears, work becomes faster and more convenient. The range of supported threads includes, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 T.P.I., modular (34) from 0.1 to 7 M.P. and DP (50) from 4 to 112 D.P. - Precise counting of threads: The lathe is equipped with a thread turning clock, which allows for quick setting of the support in the original position after unscrewing the lead screw nut. - Ergonomics and ease of use: The intuitive control panel on the gear allows for quick adjustment of the spindle speed and automatic feed. - Machining of large elements: The replaceable bed bridge allows for turning large elements with a diameter of up to 690 mm and a length of 240 mm (with the bridge removed), which increases the range of the device's capabilities. Technical parameters: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter in recess diameter x width 690 mm x 240 mm Tipper height 230 mm Distance between centers 1500 mm Bed width 300 mm Maximum knife cross-section 25 x 25 mm Total cross slide feed 290 mm Total upper slide feed 120 mm Spindle bore diameter ø82 mm Spindle nose D1-8 Spindle socket (taper) ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25-2000 rpm Screw diameter and threads ø35mm x 6mm Inch threads Pitch Pitch 2-112 TPI (thread per inch) (60) Metric threads 0.1-14mm (41) teeth per inch gear pitch dia. 4-112D.P. (50) Gear modules 0.1-7M.P. (34) Cgsdpfx Adovzzqbs Njt Longitudinal feed 0.031-1.7mm/rev. (42) Cross feed 0.014-0.784mm (42) Total tailstock bearing liner feed 120mm Tailstock bearing liner diameter ø60mm MT gear modules no. 4 Spindle drive motor 5.5kW Coolant pump motor 0.09kW Machine dimensions (LxWxH) 2720x1040x1340mm Weight 2445kg

Condition: new, Year of construction: 2025, travel distance X-axis: 390 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 300 mm, spindle speed (min.): 2,000 rpm, spindle speed (max.): 24,000 rpm, overall weight: 450 kg, tool diameter: 14 mm, warranty duration: 24 months, power: 2 kW (2.72 HP), If you are looking for a real machine and not a toy, then you have come to the right place: immediately ready for use, engraving, milling, drilling, for effective plastic and light metal processing. CNC DIN ISO G code milling machine including handy CNC control Working area: with T-slot table X=390mm Y=230mm Z=300mm Basic frame of the milling machine made of cast elements approx. 280kg with base cabinet for necessary machine assemblies such as cooling and power supplies / inverter and control approx. 170kg All axes with ball screws and 25 mm linear guides including dust protection and manual central lubrication for all axes including encoder-monitored axis drive! High-frequency spindle up to 24,000 rpm 2kW water-cooled Collet ER20 up to max. 14 mm milling tools - optional G code controlled minimum quantity lubrication - optional G code controlled suction - optional G code controlled vacuum table solution (* Prices depending on equipment, control and spindle, this is a brand new milling machine from our production) Codpfxei Hb I Ts Ad Njgt The milling machines are 100% manufactured according to customer requirements in our factory in Plauen! Illustrations show different equipment variants; You will receive a brand new milling machine from our production) Technical characteristics: · Drive system: high-precision ball screw · Working speed: max. 6000 mm/min x-y-z working area / travel range: 390 mm x 230 mm x 300 mm · Passage height: 300 mm x-y-z increment: 0.01mm/increment x-y-z repeatability: 0.02 mm · File formats: G-code, ISO data · HF milling spindle: 2.2 kW water-cooled, others optional · Spindle speed: 6,000 - 24,000 rpm Tool chuck ER20: Power connection: AC 240V, 50Hz · Power consumption: max. 2,600 W · Dimensions (WxDxH): 1300 x 850 x 1800 mm · Weight approx. 475 kg with base cabinet

Condition: new, Year of construction: 2025, Sheet metal folder RED PLUS 2200/0.8 incl. foot flapping By applying the hinges and the foot opening the capabilities have been enhanced. And the machine lets for even more accurate work. Technical details: max. working length: 2200 mm bending capacity: 0,8 mm (steel) 1,2 mm (aluminum, zinc and copper) bending angle: max. 140 degrees thickness of bending bar: 15 mm passage: 130 mm Foot flapping to open and close the bending bar Price: 2600 Euro Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs. Our folding machine RED Plus has to open and close the upper bar a foot flapping. It cans therefore turn to each tool position and you do not ever engage the clamping lever on the right site of the machine. Cgsdpfocb H Exjx Ad Nst This increases both the accuracy and speed, as well as during positioning of the workpiece at the bending edge. Angle stop for constant bending angle  Weight: 270 kg Dimensions L x W x H: 2450 x 900 x 1100 mm Warrenty 12 months Certificate CE  

Condition: new, Year of construction: 2025, Manual segment bending machine 2 meter working width The SGR model is equipped with segmented bending tools on the three beam elements: upper, lower and bending beam. Sheet metal can be bent on all sides and, for example, complex box shapes or workpieces with bending legs up and down can be produced. Multi-use, powerful, heavy and very solid segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding machine is characterized by full segmentation over the entire working length of 2 meters. Upper and lower segments can be removed easily and quickly and the bending beam is divided into segments. The bending angle is from 0 to 160 degrees. Lock with the pedal, your hands are free and you can easily position the sheet metal - open and close with your foot. The bending beam is connected to 2 gas pressure dampers, so controlling the bending beam is incredibly easy. Cjdohunv Iepfx Ad Nsgt At the rear of the machine 2 practical tool boxes for segments or tools. Technical specifications: - maximum working width; 2050mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.2mm - Weight 600kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -degree scale passage 100mm castors incl. Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT (polish invoice).

Condition: excellent (used), Year of construction: 2019, Maximum swing range (vertical axis of the electric spindle): 1650 – 2350 – 3000 mm Vector speed (X-Y) (PRO-SPEED): 85 m/min Cjdsyffh Nopfx Ad Nogt Programmable speed in Z-axis: 30 m/min Element passage: 170 mm Multifunction device BRC-K: Technical specifications (Gr-Multif_BRC-K_2.1_N5.1-0.6) 1) Performance: Motor 3.6 kW (S6 - 40%) Number of poles: 2 Speed control: via CNC with frequency inverter Cooling system with fan 3) Horizontal milling spindle: Tool holder: ER25 Spindle speed: 6000–18000 rpm Rotation direction: clockwise/counterclockwise Max. tool dimensions: L1 = 151 mm / W1 = 120 mm / D = 20 mm Max. tool dimensions 2: L2 = 111 mm / W2 = 80 mm / D = 20 mm Max. machining depth: 115–75 mm

Condition: used, mileage: 9,900 km, power: 85 kW (115.57 HP), first registration: 01/2026, fuel type: diesel, overall weight: 2,021 kg, color: white, gearing type: mechanical, number of seats: 2, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle no.: 94650A Equipment Lines and Packages * E1K Navigation Package * I2W Without special superstructure manufacturer module * I4V Without Chrome Package * PZ5 CONSTRUCTION SITE Package * F2U Parking Package * Z1L PURE STANDARD * SA8 Seat Comfort Package * F2W Winter Package Exterior * 3 months holding period from first registration * GK6 6-speed manual transmission * I44 16" steel wheels * R2D 40.6 cm (16") steel wheels with hub covers * I48 Sliding door rail cover, black textured * Z01 Standard version * F68 Exterior mirrors heated and electrically adjustable * RD9 Tires without specified brand * IK7 Exterior mirror indicators in halogen technology * XE8 ECO Catalyzer 90g * MT8 EMISSION CLASS EURO 6E M/N1 GR. II * CU2 Raised chassis with underride protection * F49 Heated windscreen * RM0 All-season tires * W50 Rear wing doors 180 degrees without windows * IL1 Domestic code * X5B INTERNAL CODE AC1B2 * IF6 Panel van * HX1 Refrigerant R-1234yf * XF8 Model generation GSR2B * I3L Without trailer coupling * I07 Without entry sills * I2S Without painted add-on parts * I1Z Without charging cable for traction battery E-Cell * I2B Without PTC element * I4A Without dust kit * I4L Without stone chip protection * I47 Without chrome trim on rear tailgate * Z3T Premium complete wheel protection (3 years) * L12 Headlamps in halogen technology * T16 Sliding door right * P48 Rear mud flaps * I0V 'Commercial' designation * I5N Side wall left * Z10 Standard route version * C61 Bumper, black textured * I9K Door handle, black * I5U Underbody protection, steel * IV1 Combustion engine * XC8 VIN visible from outside * DV2 Preparation for roof railing * F4W Windscreen washer reservoir with increased volume * H20 Heat-insulating glass all round Interior * V3L All-weather floor mats * FG1 Armrest with storage compartment * SF6 Driver's seat height-adjustable with lumbar support * FE8 Front electric window lifts * I40 Handle trim, black textured * FQ3 Glove compartment, passenger side, lockable * I5X Basic interior trim * J1F Instrument panel, plastic, black textured * J1B Instrument panel, black plastic * HH4 Thermotronic automatic air conditioning * HI2 Climate zone 2 (moderate) * KL5 Fuel filter with water separator * V4V Plastic flooring in front passenger compartment * CL3 Leather steering wheel * VG0 Centre armrest and door panels, black textured * I23 Without ambient lighting * I46 Without rear seat air vents * I2G Without side window/lift window with electric window lift * I3H Without interior rear-view mirror * I2D Without inner mirror * I3D Without folding table on driver and passenger seatbacks * I8D Without charging socket Csdpfx Asx S Amwsd Njgt * I1U Without load protection net * I1W Without third row seats * II1 Without second row seat * I2M Without middle seatbelt in rear compartment * IY5 Without seat-back pockets (driver and passenger) * I2K Without hot air duct to passenger compartment * I14 Without decorative elements * C1J Leather gear knob * I5L Upholstery fabric * H10 Seat heating for driver and front passenger * F58 Mirror in driver's sun visor * I9H Start via ignition key * VH4 Fabric 'Norwich' black * J10 Speedometer km/h * D50 Full partition wall Multimedia * E3N Digital extra: Enhanced MBUX functions * E1E Digital extra: Hard disc navigation * EW6 Digital extra: Remote Services Plus * E4S Digital extra: Smartphone integration * E1D Digital radio (DAB) * EI0 Wireless charging system for mobile devices * JK5 Instrument cluster with color disp

Condition: new, Year of construction: 2025, Manual segment bending machine 2 meter working width The SGR model is equipped with segmented bending tools on the three beam elements: upper, lower and bending beam. Sheet metal can be bent on all sides and, for example, complex box shapes or workpieces with bending legs up and down can be produced. Multi-use, powerful, heavy and very solid segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding machine is characterized by full segmentation over the entire working length of 2 meters. Upper and lower segments can be removed easily and quickly and the bending beam is divided into segments. The bending angle is from 0 to 160 degrees. Lock with the pedal, your hands are free and you can easily position the sheet metal - open and close with your foot. The bending beam is connected to 2 gas pressure dampers, so controlling the bending beam is incredibly easy. At the rear of the machine 2 practical tool boxes for segments or tools. Technical specifications: - maximum working width; 2050mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.2mm - Weight 600kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -degree scale Cgjdpocntp Dsfx Ad Not passage 100mm wheels incl. Delivery date: every week Delivery costs are PLEASE ASK We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT (polish invoice).

Condition: used, machine/vehicle number: 2020110210, mileage: 92,300 km, power: 100 kW (135.96 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 3,065 kg, maximum load weight: 435 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), onboard computer, second-hand vehicle warranty, We offer you customized lightweight box bodies on new or used low-frame chassis in various body lengths. The body and interior are always customized to your individual needs, from function to design. We produce ourselves and in Germany. Our many years of experience and our wide-ranging service offer you a great deal of flexibility in the implementation of your idea. Every project has its own ID. VW Crafter 2.0l 2011 Euro5 3500Kg First registration 21.12.2011 Mileage 92.300 km Fuel Diesel kW/hp 100/136 Manual gearbox 6 gear Codpfx Ajf D Rdtsd Nsgt ccm 1,968 cm³ Sales body is NEW, unused and with a large sales hatch across the entire width of the vehicle, 2-seater, driving license class B, rear running board, LED lights, reversing camera. Box body made of 25 mm GRP sandwich element Superlight with alcove. Rear door single-leaf 700 x 0 mm. Floor made of non-slip industrial floor panel R11. Exterior LED lighting in accordance with road traffic regulations and EU regulations. Interior dimensions WD 3800 x 2250 x 2300 mm Side flap WxH 3570 x 1480 mm Permissible total weight 3,500 kg Unladen weight 3,065 kg Interior is NEW!!! Left side: Commercial refrigerator with glass door, convection cooling Underframe for table-top appliances with sliding door, gas hob-2 burners 8.5 kW gas griddle plate Glatt 8 kW gas double deep fryer 2 x 8L 12.5 kW electric bain marie 2 kW wall-mounted hood 2200 incl. extraction, grease drain tap, flame protection filter, heat protection wall and lighting Gas cylinder cabinet for 4 x 11 kg, pressure regulator, gas pipe and gas test certificate Right-hand side: Serving table with sliding doors and stainless steel worktop 900 serving station with hinged lid 254L double sink with shelf incl. fresh and waste water tank, boiler Chalkboard with wooden frame LED illuminated Further equipment: Shelf above the sales hatch, folding bag shelf at the sales opening. 2 LED panels on the ceiling and 3 dimmable LED spotlights above the sales counter. Plenty of storage space. Standard electrical installation 380 volt/16A, power socket in accordance with CEE standard, RCD, 16 ampere fuse with acceptance, 5 double sockets, hygiene package, fire protection package. Net price ¤ 63,920.00 plus 19% VAT Subject to errors and prior sale.

Condition: new, Year of construction: 2026, Industrial metal lathe CORMAK TORNADO 460x2000 Main advantages: - Versatile applications : The lathe is ideal for various tasks, such as turning internal and external surfaces, cones, metric, inch, modular and DP threading, polishing, drilling and broaching. - Stable construction : The 300 mm wide cast iron bed has been hardened and precisely ground, which ensures high vibration reduction and stable working conditions even under heavy loads. - Digital precision : The device is equipped with a digital readout on two axes (longitudinal, transverse), which visualizes the exact values ​​of shifts on the screen thanks to optical measuring lines. - High-quality spindle : Reinforced bearing system in the spindle and a large passage of 82 mm guarantee optimal efficiency during work. The set also includes a 3-jaw lathe chuck with a diameter of 250 mm and a 4-jaw chuck with a diameter of 320 mm , a 5.5 kW motor. - Efficiency and productivity : The rapid longitudinal and transverse feed system on the joystick significantly shortens the machining time, and the hardened and ground gears in the spindle gear ensure durability and reliability for years. - Wide possibilities of threading : Thanks to the threading function (metric, inch, modular and DP), right and left, and the possibility of changing parameters without the need to replace gears, work becomes faster and more convenient. The range of supported threads includes, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 TPI, modular (34) from 0.1 to 7 MP and DP (50) from 4 to 112 DP - Precise counting of turns : The lathe is equipped with a threading clock, which allows for quick setting of the support in the original position after unscrewing the lead screw nut. - Ergonomics and ease of use : The intuitive control panel on the gear unit allows for quick adjustment of the spindle speed and automatic feed. - Machining of large elements : The replaceable bed bridge allows for turning large elements with a diameter of up to 690 mm and a length of 240 mm (with the bridge removed), which increases the range of the device's capabilities. Technical parameters: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter in recess diameter x width 690mm x 240mm Canine height 230mm Distance between fangs 2000mm Cgsdpfxev E Eiie Ad Njt Bed width 300mm Maximum knife cross-section 25x25mm Total travel of the cross slide 290mm Total upper slide travel 120mm Spindle bore diameter ø82 mm Spindle tip D1-8 Spindle socket (cone) ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25-2000 rpm Lead screw diameter and threads ø35mm x 6mm Inch threads Pitch Pitch 2-112 TPI (threads per inch) (60) Metric threads 0.1-14mm (41) teeth per inch tooth pitch dia. 4-112D.P. (50) Gear modules 0.1-7M.P. (34) Longitudinal feed 0.031-1.7mm/rev (42) Cross feed 0.014-0.784mm (42) Total travel of the tailstock bearing liner 120mm Tailstock bearing sleeve diameter ø60 mm Gear modules MT No. 4 Spindle drive motor 5.5kW Coolant pump motor 0.09kW Machine dimensions (LxWxH) 3220x1040x1340 mm Weight 2785 kg

Condition: new, Center height 230 mm Center width 1000 mm Turning diameter over bed 460 mm Turning diameter without bridge 690 mm Turning diameter over support 285 mm Passage 58 mm Spindle mount DIN 55029 1 - 6" 12 speeds 25 - 2000 rpm Travel path - top slide 128 mm Travel path - cross slide 285 mm Feeds (longitudinal) 0.031 - 1.7 mm/rev Feeds (transverse) 0.014 - 0.784 mm/rev Thread (metric) 0.25 - 3.5 mm Thread (inch) 2 - 112 Gg/1" Thread (diametric) 8 - 144 D.P. Thread (module) 0.25 - 3.5 mm Motor power 400 V / 50 Hz / 5.5 kW Tailstock MK 4 Dimensions L x W x H 2020 x 1080 x 1600 mm Weight 1680 kg Accessories / Special features: • Lead and pull-spindle lathe in heavy-duty design with extensive standard equipment. Low vibration and smooth running. Including solid base and machine bed. • 3-axis digital display • 3-jaw chuck Ø 250 mm • 4-jaw chuck Ø 300 mm • Fixed and rotating steady rest • Quick-change tool holder system Multifix size B mounted, 5-part • Strong and torsion-resistant construction of the machine base and bed, which is cast in one piece from vibration-absorbing gray cast iron. • Hardened and ground bed guideways • Generously dimensioned machine bed • All guides are provided with adjustable wedge strips • Central lubrication in the bed slide • Right / left rotation can be switched on the bed slide • Removable bed bridge for machining large workpieces • Adjustable tailstock for turning cones • Guaranteed concentricity < 0.015 mm measured in the spindle nose • Closed feed gear, gears and shafts are hardened and ground • Clear control element with solid selector levers for selecting the speeds • Oil bath change gear with hardened and ground gears • Handwheels with adjustable fine scaling • Main spindle hardened and ground and running in an oil bath, as well as tapered roller bearings • Longitudinal feed, can be switched off using 4 adjustable switching cams • Mechanical foot spindle brake • Lead screw cover • Acceptance protocol Cgsdpfjk Dn Nwsx Ad Njt • Manufactured according to DIN 8606 toolmaker precision • CE compliant Delivery time: immediately, subject to prior sale Year of manufacture: 2023 (unused exhibition machine) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, roll diameter: 50 mm, roll width: 410 mm, total width: 490 mm, total length: 3,360 mm, Interroll RM 8310_R24/48V Transfer Element Total length: 3360 mm Cedpfx Adsv T Dwbs Nogt We offer more than 100 meters of roller conveyors from Interroll – in various lengths, with or without drive, curves, adjustable legs, access flaps, inclined infeeds, transfer elements, etc.

Condition: new, functionality: fully functional, machine/vehicle number: 800.12_AB, inner dimension height: 800 mm, total width: 1,200 mm, mesh size: 100 mm, 12 x GITTERBOX II.Wahl UPPER FRAME CLIP FRAME Height 800 mm NEW (800.12_AB) 12 lattice boxes / stacking frames Article no. 800.12_VS consisting of 2 elements powder-coated color green slight optical defects = II. choice these are assembled on the Euro pallet and held together with hooks. When not in use, these elements can be stored to save space. Basic dimensions: 1200 x 800 mm Height: 800 mm Mesh size: 100 x 100 mm / wire Ø 3.8 mm With flap for easy removal of goods Item is NEW with minimal optical defects Item can be inspected by arrangement Cgedpfx Adstvfqpj Not We are happy to advise. Photo similar

Condition: new, functionality: fully functional, inner dimension length: 800 mm, inner dimension width: 1,200 mm, 12 x GITTERBOX II.Wahl UPPER FRAME CLIP FRAME Height 1000 mm NEW 12 mesh boxes / stacking frames Article no. 1000.12_AB consisting of 2 elements powder-coated color green slight optical defects = II. choice these are assembled on the Euro pallet and held together with hooks. Cgjdpfx Aetvfm Ted Njt When not in use, these elements can be stored to save space. Basic dimensions: 1200 x 800 mm Height: 1000 mm Mesh size: 100 x 100 mm / wire Ø 3.8 mm With flap for easy removal of goods Article can be inspected by arrangement We are happy to advise you. Photo similar Goods are only offered for collection. Please contact us if you wish to have the item shipped.

Condition: used, Four wins - The building blocks of success from DLK - Lagertechnik | Levelmaker® | Logistik | Lösungen WE OFFER Roller Conveyor Conveyor Conveyor Lightweight roller conveyor Aluminum roller conveyor Aluminum frame with aluminum rollers Roller conveyor elements / roller width 600 mm: 1,500 mm x 720 mm (1) 2,100 mm x 720 mm (1) 2,800 mm x 720 mm (1) 3,500 mm x 720 mm (2) 4,000 mm x 720 mm (3) Roller conveyor elements / roller width 420 mm: 1,800 mm x 520 mm (1) 2,100 mm x 520 mm (1) 2,400 mm x 520 mm (1) Codpfx Adjuk Hb To Nsgt 2,700 mm x 520 mm (1) 2,800 mm x 520 mm (5) Hinged passage (2) Roller conveyor curve 90 degrees Outer length: 2,400 mm ----- This is a used item. PROJECTION Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to help you with the transportation and assembly of your goods. TERMS OF PAYMENT Terms of payment must be agreed in the event of an order. The price is understood to be the unit price/net price or as stated in the description text (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, warehouse platforms, textile warehouses and machines for trade, industry and crafts. We constantly offer you interesting second-hand offers from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : Csdsd Amgkopfx Ad Nsgt 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: used, Year of construction: 2022, Fully integrated turning and tilting table with counter bearing Additional fixed table on the left for the first machining side X-travel of 1,530 mm High dynamics and speeds of 20,000 rpm Fully encapsulated work area, separate from the Tool magazine Good accessibility Easy to automate with pallets and robots X-axis travel 1,530 mm Y-axis travel 530 mm Z-axis travel 465 mm Rotary table diameter 5th axis 650 mm Number of tools 54 Spindle speed 20,000 rpm Tool Holder HSK63 U-1530 MACHINE: Advanced build variant for highest performance level in U5 5-axis version Strokes X=1530mm, Y=530mm, Z=465mm Linear guidance in all three axes Required setup elements on the machine bed for adjustment Full cladding splash guard + working area light High Precision MILLING SPINDLE: Up to 20,000 rpm in fit-motor spindle With direct drive without belt Liquid cooling Tool mount on HSK63 spindle TOOL MAGAZINE: With 54 tool stations High-speed intelligent controller version With fast-running tool chain Separated from working area by pneumatic flap U-1530 FIXED TABLE: With T-slots for fixing workpieces and clamping devices 160mm top plate available for distance table/spindle for tall superstructures and use of tailstock DIRECT MEASURING SYSTEMS in X/Y/Z-Axis: For increased positioning accuracy and improved heat transfer Designed with Heidenhain scales and integrated in control Version with SIEMENS control with the following features: Attention: Siemens general conditions for software products are valid SIEMENS 840D control with features: New developed: SPINNER-SPIOS 24" Touch Control Panel for 10.4 applications Ultra-compact design with reduced panel footprint for premium ergonomics Multitouch layout, colorful flat panel display with Multi touch functionality Integrated Edge devices for full digitization Easy to use and user interface 2-Axis Rotary Tilt Table D=650: High precision “S” design Made in Germany with direct measuring systems on both rotary axes Designed for demanding machining operations Equipped with high-power gear Rotary feed for automatic operations and pallet changer Equipped Features: Pre-tensioned high-performance brakes in B and C axis Designed for clamping during emergency stops High axial stiffness Increased accuracy in the tilting axis Heavy Duty Table: Max load capacity 650 kg Tilting force and accuracy designed for serious machining Hydraulic Brake: For large rotary table in C-axis Increased rigidity during machining Counter-Balance Function in B-axis: Compensates tilting moment on the rotary table with workpiece force Enhanced stability during machining 6-Fold Rotary Feed: Inside the center of the C-axis 6-channel designed for media connection Max hydraulic pressure of 240 bar or additional exhaust ventilation connections High pressure tank: 70 bar capacity with paper band filter for flushing, located centrally through the spindle, stand-alone next to the machine with additional coolant volume, including high-pressure pump and level monitoring. Additional blower: Air at headstock for cooling with air instead of liquid. Compressed air supply: Supplying via milling spindle, alternatively to coolant high-pressure through spindle. Rinsing gun: Installed in the working area for cleaning. Preparation: Csdpfowkum Tsx Ad Negt For SPINNER-Blum Touch probe with IR receiver for wireless transmission. "Advanced Surface" For optimizing the machining surface. "Spline Interpolation" To shorte...

Condition: used, first registration: 08/2022, loading space length: 3,000 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, total width: 3,000 mm, total height: 2,600 mm, Year of construction: 2022, Premium container conversion in very good condition. Versatile in use. - Purchase price (2022) EUR 55,500 - Dimensions L 3 x W 2.5 x H 2.6 meters (closed) - Weight approx. 1,500 kg QUALITY MADE IN GERMANY - Premium sea container, professional conversion by renowned vehicle specialist Wiese / Max Container, Minden - Extremely durable quality: body made entirely of Corten steel, floor sealed against moisture (bitumen) Moisture-sealed floor (bitumen coating) EQUIPMENT - Efficient power LED lighting technology (eye-catching on the outside, convenient work lighting on the inside) - Fold-out elements: 3 adjustable side counters, 3 easy-opening side flaps (gas pressure dampers) Csdpfx Ader Ivxto Nsgt - convenient equipment: connections: In/out water, high voltage current, - V4A counters and sink with instantaneous water heater and sink, - XL gastro refrigerator, all-round V4A work surface - Weather protection film (via piping system) also enables year-round outdoor operation EASY HANDLING - Quick design changes - flexible by replacing printed magnetic foils - Easy transportation on heavy-duty trailer with electric winch (also available as an option) - Removable heavy-duty castors (= mobile unit), easy to move on firm ground additional ADVANTAGES - as a mobile unit, no building permit is required for permanent placement - future-proof for growth: expandable modular concept (up to 3 additional containers can be combined) - technical documentation / detailed documentation available Location in 32425 Minden / North Rhine-Westphalia.

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter Cjdpfx Adjvbk Rwo Nogt - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, volume flow: 3.2 m³/h, filter area: 21 m², noise level: 67 dB, total height: 2,000 mm, total length: 2,360 mm, total width: 900 mm, overall weight: 770 kg, compressed air connection: 6 bar, extraction nozzle diameter: 200 mm, The SPÄNEX dust extractor type SMU 32 / 45 BA with container and discharge is a compact disposal station for disposal station for commercial use for installation in the work area. Consisting of: Dust extractor with vacuum-proof housing with suction nozzle and non-return flap, antistatic filter elements with jet-pulse cleaning, high-performance radial fan arranged on the clean gas side with centrifugal fan with three-phase motor of energy efficiency class IE3 and integrated exhaust air sound attenuation and air outlet grille, charging container with 0.55 kW discharge device, a circuit with CEE appliance plug (phase inverter). The circuit is designed for automatic operation. The automatic start-up control for max. 6 machines and automatic cleaning of the filter with runtime addition are included. For the coils or potential-free contacts of the machine can be used for automatic start-up. can be used. Optionally possible: Cgjdpfst Ug Sgsx Ad Not Conversion to chip collection container € 1,270.00 net alternatively: Installation of a branded rotary valve € 1,690.00 net

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total length: 5,500 mm, total height: 2,000 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 400 mm, product width (max.): 650 mm, compressed air connection: 6 bar, film width: 650 mm, Manufacturer: Kallfass Verpackungsmaschinen GmbH Model: Super Wrap 650 De Luxe In-Line Bundling Machine Year of manufacture: 2009 Dimensions: approx. 3160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical specifications: Film: Flat film, up to approx. 120 µm Film roll width: max. upper 650 mm, lower 620 mm Working height: 815 - 915 mm Cedpfxoxxlhns Ad Negt Passage width: 650 mm Passage height: 100 - 400 mm Power supply: 400 V three-phase Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle This particularly versatile bundling machine operates with two flat film rolls. Product infeed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and therefore maintenance-free. Film rolls are simply placed, and film feeding is motor-driven. Manufacturer: Kallfass GmbH Model: Shrink Tunnel Standard 650 NT Year of manufacture: 2009 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 400 mm Tunnel outfeed, extended: approx. 500 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 26.5 kW Rated current at 400V: 38.5 A in stand-alone operation Powerful, universally applicable shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings underneath for precise control of hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculating air system, tunnel hood with additional double-chamber system, and significantly improved all-round insulation ensure energy-efficient operation. Equipped with infinitely adjustable rod chain conveyor. Inspection and demonstrations are possible at our premises by appointment. Function guarantee, no warranty.

Condition: used, mileage: 22,130 km, power: 600 kW (815.77 HP), first registration: 05/2025, fuel type: electric, overall weight: 20,000 kg, color: green, gearing type: automatic, Vehicle number: 1324766003 1 owner, accident-free, full service history, non-smoker ---- ENGINE, TRANSMISSION & CHASSIS * BRAKING SYSTEM Additional features * We also offer financing/leasing and rental options! * LA1 6129 MAMBA GREEN METALLIC MATT * LA3 9040 DEEP BLACK * LZ2 FULL PAINT FINISH * LZ3 WHEELS * CHASSIS CONFIGURATION * V1L EACTROS * ZZT TYPE TRACTOR UNIT * C2C WHEELBASE 4000 MM * AXLE LOAD DISTRIBUTION * T4M WEIGHT VARIANT 20.0 T (9.0/11.5) * M4I TYPE 600 * M7I INSECT PROTECTION GRILLE IN FRONT OF COOLING UNIT * CLUTCH & TRANSMISSION * N6V PREPARATION FOR ELECTRICAL PTO, HIGH POWER * AXLES & SUSPENSION * A1Z FRONT AXLE, DROPPED VERSION * A1E FRONT AXLE 9.0 T * A3G REAR AXLE, ELECTRIC, 4-SPEED, 13.0T * A1A FRONT AXLE AIR SUSPENDED * J3Z AXLE LOAD MEASURING SYSTEM * WHEELS & TIRES * R1T TAPERED SHOULDER RIMS 11.75 X 22.5, FRONT AXLE * R1Q TAPERED SHOULDER RIMS 9.00 X 22.5 * R0Z WHEEL NUT COVERS * S1Y TIRE PRESSURE MONITORING * A1 W68KBB 75 2 X 385/55 R 22.5 TL HIGHWAY RR STEERING ?K? * A2 F38LCB 75 4 X 315/70 R 22.5 TL HIGHWAY RR DRIVE ?L? * FRAME & FRAME COMPONENTS * C5B STEP PLATE ABOVE FRAME, PARTIAL COVER * C5P BOLTED FRAME * C0A FRAME OVERHANG 750 MM * C6G STEERING, SERVOTWIN * CZO POWER STEERING PUMP * FRONT AXLE * CZG WHEEL ARCH, INNER LINING * CZH FRONT FENDERS, STANDARD * C8C REAR AXLE MUDGUARD, 2500 MM VEHICLE WIDTH * C8H 3-PIECE FENDER WITH EC SPLASH GUARD * C8I SPLASH GUARD (EC), FRONT * CSJ UNDERBODY PANELING, PROCABIN, STANDARD * C7F FRONT UNDERRUN PROTECTION (ECE), ALUMINIUM * F7A BUMPER, CORNERS MADE OF PLASTIC * F7C BUMPER, CENTER SECTION WITH TOWING EYES * C8Z SIDE SKIRTING, AERODYNAMIC * Q4W LOW-MAINTENANCE FIFTH WHEEL COUPLING * Q5S FIFTH WHEEL COUPLING STANDARD, SAF GF SK-S 36.20 * Q6A MOUNTING PLATE 12 MM, 20 T * Q6Z FIFTH WHEEL ANGLE PLATE, WITH HOLE GRID * Q4I FIFTH WHEEL HEIGHT, H = 150 MM * H2C FIFTH WHEEL PRE-DIMENSION +600 MM * Q0W FACTORY-INSTALLED FIFTH WHEEL * Q0Y TILT ANGLE OUTSIDE DIN ISO 1726 Cgodpfowmi R Eox Ad Njt * B2A DISC BRAKES, FRONT AND REAR AXLE * B1B ELECTRONIC BRAKING SYSTEM WITH ABS AND ASR * B1F HEATING, ELECTRONIC AIR SUPPLY UNIT * B1H ELECTRONIC AIR SUPPLY AND CONTROL, MEDIUM * B4A CONDENSATE MONITORING FOR AIR SYSTEM * B4L AIR TANK, ALUMINIUM, COMPLETE * B5J BRAKE AND ELECTRIC CONNECTIONS, LOW * B2X PARKING BRAKE, ELECTRONIC * CAB EXTERIOR * FAV CAB TYPE PROCABIN * F1R L-CAB * F2A FLOOR VARIANT, FLAT FLOOR * F2H CAB WIDTH 2.50 M * F2P CAB, 765 MM MOUNTING HEIGHT * F3Q PROCABIN-BIG, FLAT FLOOR * F2V BIGSPACE * F4H CAB REAR WALL, WITHOUT WINDOW * F3C CAB SUSPENSION, COMFORT, AIR SUSPENDED * F3W CAB TILTING SYSTEM, MECHANICAL-HYDRAULIC * F6E TINTED WINDSCREEN, WITH SHADE BAND, HEATED * F8V LIGHT SENSOR * F8W RAIN SENSOR * D8M SLIDING/TILT ROOF ELECTRIC, GLASS VERSION * F4X EXTERIOR STORAGE COMPARTMENT FLAP, LEFT * F4Y EXTERIOR STORAGE COMPARTMENT FLAP, RIGHT * F4Z STORAGE BOX, LEFT UNDER CAB * C5D ACCESS, REAR OF CAB, LEFT * F4T TOP ENTRY, PAINTED * F7T DOOR EXTENSION * F7X CAB ENTRY LEFT/RIGHT, FIXED * F6I FRONT MIRROR, HEATED * F6T MIRRORCAM * F5L EXTERIOR SUN VISOR, TRANSPARENT * F4U A-PILLAR CLADDING, AERODYNAMICALLY OPTIMIZED, PAINTED * F4V A-PILLAR CLADDING, AERODYNAMICALLY OPTIMIZED * F5B AIR GUIDE ELEMENT, LOCKABLE, WITH END FLAPS * F6R AIR HORNS, CAB ROOF * F0F SIDE MODULE, N3 VEHICLE * F8B 2 REMOTE CONTROL KEYS * F8E CENTRAL LOCKING SYSTEM, MI

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 01/2025, emission class: euro6, color: white, number of seats: 6, total length: 5,981 mm, total width: 2,474 mm, total height: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Consumption data for basic vehicle before conversion. Internal number: 86430---- Subject to errors and prior sale! SPECIAL EQUIPMENT * Outside mirrors electrically adjustable, heated and foldable * Seats: No rear seats * Seat package 14: Driver's seat adjustable in 4 ways - Single passenger seat adjustable in 4 ways - Headrests height adjustable - Seat heating for driver and passenger - Inside armrest for driver and passenger seat - Lumbar support, manual (driver's seat) - Seat cover: fabric * Auxiliary heating package 1: Auxiliary heating (fuel-powered additional heating), programmable, including remote control - including cold start package (-29 degrees) * Technology package 10: Heated windscreen - Windscreen wipers with rain sensor - Parking pilot system front and rear - Emergency brake assistant, active (camera-based) - Lane assistant with fatigue warning and high beam assistant, additionally with lane keeping assistant - Headlight assistant with day/night sensor - Cruise control - Rear view camera - LED downlight - Fog lights - Ford audio system with 4 inch multifunction display * Heat-insulating glazing, medium tint * KMP conversion: Linearlift AMF Solid (warning lights, side guard rails, roll-off protection) - MobileFlex system floor - B-pillar bus bar - Automatic diagonal shoulder belt with height adjustment - Automatic three-point belt with adjustable belt whip and sliding element for height adjustment - Wheelchair and passenger restraint system with retractor belts - Grey storage box - LED additional flashing lights at the rear/flat - Börde aluminum step - Linea EcoLeg single seat (integrated headrest, automatic three-point belt, right armrest, central base with quick release) OTHER EQUIPMENT * 1 battery * Airbag on driver and passenger side * ABS with electronic brake force distribution * Battery life, battery life programmed to 10 min * Rubberized floor (in driver's cab and passenger compartment) * On-board computer with consumption and mileage information (e.g. B. remaining range) as well as outside temperature display and Ford ECO mode * Complete roof liner * Double-wing rear door with 180° opening angle (with window) - with heated rear windows, rear window wiper including windscreen washer nozzle * ESP with traction control - hill start assist - crosswind assist - safety brake assist - rollover protection - emergency brake support including emergency brake light * Passenger compartment lighting with delay circuit * Window, 2nd row: side windows fixed, right * Electric front window lifter with quick-down/up circuit for driver's side * Ford Easy Fuel - comfort tank cap and misfuelling protection * Generator, high-performance version * Lockable glove compartment with lid * Interior lighting with delay circuit with reading lights at the front * Air conditioning at the front including dust and pollen filter * Fuel tank 70 l * Steering wheel: artificial leather steering wheel * Steering column, adjustable in height and reach Cjdpfxjvv Auke Ad Nogt * MyKey key system - individual programmable second key * Emergency call assistant * Particle filter: diesel particle filter * Wheels: wheel covers * Wheels: tire repair kit * Wheels: steel wheels 6.5 J x 16 with 235/65 R 16 tires * Headlight dipped beam halogen headlights with daytime running lights * Sliding door, right * Mud flaps rear * Side protection strips * Low side paneling * Power steering * Seat belts - seat belt tensioners and belt force limiters at the front - warning system for driver's