Used Paint Mist Extractor for sale (5,217)

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Iiedpfxov Ed Uke Anwsc Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Year of construction: 2014, condition: used, functionality: fully functional, Mobile chip extractor MG4, sound-insulated and equipped with automatic start. Features an antistatic filter, suitable for extracting aluminum, PVC, and steel chips. Automatic filter cleaning and easy chip container emptying thanks to castors. The VP version is fitted with a control unit featuring a potential-free contact for external activation by the connected machine. Iiodpfxoycgtbo Anwjc The front extraction system comprises two cast aluminium suction ports, each with a 100 mm diameter. These allow for multiple connections via plastic hoses with metal reinforcement to dust extraction devices mounted on cutting machines, sawing centers, machining centers, and PVC machinery. Accessories include adapters reducing to 70 mm, a Y-connector, and approximately 14 meters of extraction hose. (Perfectly set up for use with an Emmegi double mitre saw)

Condition: excellent (used), Year of construction: 2015, Brand: Makor Type: Robospray Twin Year: 2015 Inner dimension L: 670 cm Inner dimension W: 330 cm Inner dimension H: 213 cm Exhaust system: Yes Electric connection: 400 V Dimension L: 11000 mm Dimension W: 4600 mm Dimension H: 4500 mm Includes Iedpfsiu Hbnsx Anweic - 2x electric foil roll-off units; - 1x Beerepoot mobile roller conveyor

Condition: good (used), Year of construction: 2017, Insulated cyclone by GEA, model CYCLONE CHE 394. Year 2017. With 2 reinforcement brackets. Bottom outlet DN100. Iiodpfx Anjy Hfxrowjc Top inlet Clamp 1". Side inlets Clamp 1" and 4". No documentation available. Cyclone dimensions: Length: 650 mm Width: 560 mm Height: 1510 mm

Condition: new, Oil mist filters Donaldson DMC-MMB, 7 units available / Oil mist filter Absolent A.mist10 Iiodpsy H Exfjfx Anwjc

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 3,500 m³/h, negative pressure: 3,000 Pa, Mobile welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter TEKA. Model: TK-PF Mobile filtration and ventilation unit. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency. Fan power: 1.1 kW – three-phase Max. capacity – 3500 m3/h Max. negative pressure – 3000 Pa 2 extraction arms, each 4.00 m long. Stock no. – 1106 Iedpfjy Hq Rtjx Anwsic

Condition: used, type of input current: three-phase, filter area: 40 m², suction capacity: 4,000 m³/h, negative pressure: 2,500 Pa, Welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type by TEKA. Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter elements. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. Fan power: 4 kW Iijdpfxjy Hhd Ds Anwjc Capacity: 4000 m3/h Vacuum: 2500 Pa Filtration surface: 40 m2 Inlet diameter: 315 mm Device dimensions: Height - 2.50 m Width - 1.25 m Depth - 0.97 m Stock no. - 1116

Condition: excellent (used), Year of construction: 2019, operating hours: 9,058 h, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, filter area: 106 m², suction capacity: 7,000 m³/h, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum system suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 6 Year of manufacture: 2019 The unit has 9,000 operating hours. Filtration area: 106 m² Iodpfx Anoydcygowjic Fan power: 7.5 kW Capacity: 7,000 m³/h Inlet diameter: 315 mm Dimensions: Height: 3.38 m Width: 2.10 m x 1.15 m Stock number: 1105

Condition: used, Year of construction: 2009, Used dust extractor Year of manufacture: 2009 Nominal airflow: 1120 m³/h Minimum airflow: 814 m³/h Extraction port: 120 mm Ijdpfxsy A T Uts Anwjic 2050 Pa Filter area: 4.3 m² Motor: 2.2 kW, 400 V Dimensions (HxWxD): 1985x1085x650 mm Weight: approx. 99 kg Availability: short-term Storage location: Flörsheim

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 30.20 Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net Iedpsfr T Emsfx Anwjic side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Isdpfx Ajfr T Eqenwsic Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSE 20.20 Iisdjfv Hiqepfx Anwoc Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is installed above the wall + Fan in the height Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Exhaust air pipe: 500 Ø mm depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Isdpfjfn Ndcjx Anwjic Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Iiedpfx Ansfn Nddowsc Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: new, CATALOG NUMBER MR001 - brand new machine, DTR documentation + CE TECHNICAL DATA Iijdpox Uz Rmefx Anwjc - working width: 2000 mm - front width: 2500 mm - depth: 850 mm - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard - "Paint-stop" filters - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, The DC3000 from CORMAK is an advanced sawdust cyclone designed for intensive dust extraction processes in the woodworking, furniture and metalworking industries. Thanks to its state-of-the-art cyclone separator, powerful sawdust fan and double filtration system, the unit ensures effective air cleaning of fine and coarse dust fractions. The sawdust extractor DC3000 is distinguished by its automatic filter shaking - which significantly increases the comfort and efficiency of daily work. Technical parameters Extraction capacity 2000 - 7000 m³/h Fan rotation speed 2800 rpm Suction nozzle diameter 3 x 100 mm / 1 x 200 mm Number of containers 2 Motor power 3 kW / 400 V Dimensions 1300 x 1000 x 2200 mm Weight 219 kg Iisdpfxewwtz Nj Anwsc Standard equipment Automatic filter shaker Pressure gauge Double filtration system (main and pre-filter) Metal container under the separator Transport wheels

Condition: used, 1 – Transport table with cleaning device (air blast device) – here, a brush runs across the entire width of the table and removes dust residues from the workpieces. 2 – Roller coating machine No. 1 3 – Roller coating machine No. 2 4 and 5 – UV lamp with conveyor – 1 lamp irradiates from above 6 – Brushing machine Quick Wood System RO1400 7 – Venjakob spray booth – equipped with two separate circuits with pumps as well as 8 spray guns. 8, 9, 10, 11, 12 – Drying tunnel with top air supply through nozzles, with the capability to control temperature and air supply in 3 zones. 13, 14 – UV lamp with conveyor – 2 lamps positioned at an angle to the workpiece, also cure the edges. 15 – 4-roller brushing machine with separate height and speed adjustment for each roller. 16 – Outfeed table for intermediate sanding 17 – Cleaning device (air blast device) for removing light dust from the surface 18 – Venjakob spray booth – equipped with one circuit, but can be converted to a second circuit by exchanging the entire rack with pistols (a spare rack is included), and switching the pump (two pumps are included with the set). 19 – Roller conveyor, prepares items for the dryer, controlled by light barriers 20 – Dryer with 14 levels 21 – 3D UV lamps Superfici, gallium and mercury Iisdpfx Anoy Em Hhjwec 22 (not shown in the diagram) – Outfeed table with two speed settings, adjustable to the unloading speed of the paint line.

Condition: used, Year of construction: 2002, functionality: fully functional, type of input current: three-phase, overall weight: 1,700 kg, filter area: 286 m², suction capacity: 10,000 m³/h, Dust extractor, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation by renowned brand Donaldson Torit. Suitable for plasma, laser, sandblasting, soda blasting, welding and all types of dry dusts. The fan is installed after the filter on the clean air side, which minimizes explosion risks. Ultra Web filter cartridges are cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the unit. Model – DF+12 SPKTRP Fan power: 11 kW Capacity up to 10,000 m3/h Connection diameter: 315 mm 12 filter cartridges Filter area: 286.8 m2 Isdpfxey D Sclj Anwoic Year of manufacture: 2002 Equipped with "SparkTrap" spark arrestor system Stock number: 1121

Condition: new, functionality: fully functional, Year of construction: 2026, The FM230 extractor is characterized by small dimensions and at the same time high efficiency of up to 1000 m3/h. Standardly equipped with a metal rotor and a running base. Great value for money, which makes it an uncompromising device in its category. Many years of effort by our team resulted in the creation of a multi-patch metal impeller of the WhirlWind series, which, together with the massive metal casing, constitutes the heart of the extraction system. The vacuum air draft perfectly sucks excess sawdust generated during mechanical processing of wood, produced during machine operation. The massive construction of the extraction unit has been enriched with additional supports in the base to ensure stable and vibration-free operation of the device. The entire structure has been reinforced with appropriately thick supports that keep the chute cylinders and the weight of waste bags in the right position on a massive base. An additional advantage is the use of a flexible and durable gasket placed in a critical place to improve the tightness of the entire system. As standard, we equip the extractors with canvas bags (filter and waste) and additional disposable, durable plastic waste bags. Flexible metal bands ensure long-term trouble-free operation of bag replacement. The use of swivel and ball-bearing wheels ensures efficient movement of the extractor around the facility. Machine characteristics The perfect machine for both professionals and amateur carpenters. Optimum extraction performance works perfectly with machines such as: Planers Planers Thickness planers Milling machines Technical data ENGINE POWER 0.75 kW SUCTION PERFORMANCE 1000 m3/h VOLUME OF BAGS 60L NUMBER OF BAGS 2 DIAMETER OF SUCTION PIPE 100mm HEIGHT 1500mm WIDTH 420mm LENGTH 600mm VOLTAGE/FREQUENCY 230V WEIGHT 27kg Iodpfsvu Az Uox Anwoic

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230A Wood Chip and Dust Extractor + 2.5 m Hose The CORMAK FM230A dust extractor is a high-performance chip extraction fan designed for efficient removal of wood chips, shavings, and wood dust generated during woodworking processes. This compact chip extractor is ideal for carpentry workshops, production facilities, and home workshops where effective dust extraction from workstations is essential. The model is equipped with a flexible extraction hose with a length of 2.5 m, allowing quick connection to woodworking machines such as planers, table saws, milling machines, and thickness planers. Thanks to this, the chip extraction system can be easily positioned anywhere in the workshop, ensuring effective removal of dust and chips directly from the source. The powerful extraction fan generates an airflow of up to 1080 m³/h, ensuring fast and efficient suction of wood chips and dust. The solid construction and metal impeller provide stable operation, high durability, and reliability even during intensive use in a woodworking workshop. The mobile design with transport wheels allows convenient movement of the unit between workstations, while the bag filtration system effectively separates air from wood chips. As a result, the wood dust extraction system helps maintain cleanliness in the workshop and improves both comfort and workplace safety. Key Advantages extraction hose included – 2.5 m Ø100 mm high suction capacity – up to 1080 m³/h efficient fan for chips and wood shavings single-phase motor 0.75 kW / 230 V durable metal impeller mobile construction with transport wheels efficient filtration system for chips and wood dust large waste bag enabling long operating time compact design ideal for woodworking workshops Applications The CORMAK FM230A chip and dust extractor is designed to work with many woodworking machines that require effective dust extraction: jointers and planers thickness planers table saws spindle moulders wood sanders Thanks to the high airflow performance, the dust and chip extractor effectively removes contaminants generated during woodworking, improving visibility at the workstation and reducing the amount of dust in the air. Standard Equipment CORMAK FM230A dust extractor extraction hose Ø100 mm – 2.5 m filter bag waste collection bag mounting clamps mobile base with wheels Technical Specifications Parameter Value Motor power 0.75 kW Power supply 230 V / 50 Hz Extraction capacity 1080 m³/h Motor speed 2800 rpm Vacuum pressure 1000 Pa Noise level 68 dB Number of bags 2 Suction inlet diameter 100 mm Hose length 2.5 m Bag capacity 90 L Height 1800 mm Width 750 mm Length 450 mm Weight 27 kg Isdpfx Aneytn Tdswjic

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230 with dust filter is a compact, mobile professional dust extractor designed for efficient removal of chips, dust and sawdust in woodworking workshops. The fine dust filter ensures not only strong suction power but also increased filtration efficiency, improving air quality in the workplace. Main advantages of the machine Performance 1,000 m³/h – ideal for use with medium and small woodworking machines. Dust filter – effectively captures fine particles, including sanding dust. Motor 0.75 kW / 230 V – quiet, energy-efficient operation without the need for three-phase installation. Mobility – four castor wheels allow easy movement around the workshop. Compact design – takes up little space, ideal for small workshops. Design and technology The unit is equipped with a metal chip extraction fan ensuring long service life and reliability. The high-quality dust filter effectively separates fine particles from the air stream, reducing workshop dust levels. The solid, powder-coated housing protects internal components, while the sealed suction system prevents pressure loss. Precision and efficiency The CORMAK FM230 woodworking extractor provides stable and consistent suction. With an output of 1,000 m³/h and low power consumption, it efficiently serves a single woodworking machine without interruptions. The fine particle filter also makes it an excellent dust extractor for sanding applications. Applications Small and medium-sized joinery workshops Craft and production facilities Technical schools and training workshops Iisdpfsycuckox Anwec Home and hobby workshops The FM230 works perfectly with milling machines, planers, jointers, belt sanders and thicknessers. Standard equipment Dust filter Waste collection bag Castor wheels with brake Bag fastening clamp Optional equipment Extraction hose Ø100 mm Suction port reducers Additional set of filter bags Technical data Motor power 0.75 kW Extraction capacity [m³/h] 1,000 Vacuum pressure 1,800 Pa Noise level 70 dB Bag capacity 60 L Number of bags 2 (filter + waste) Suction port diameter 100 mm Dimensions (H × W × L) 1,500 × 420 × 600 mm Power supply 230 V Weight 27 kg

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Iisdpfxoxrdhas Anwsc Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 3900 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: new, Year of construction: 2026, Wetpaint Spray-/ Dryingcabine Internal dim. L8000 x B4000 x H3000mm 30.000m³/h Inletair/ 30.000m³/h evaporation Internal Temp. 20°C man. adjustable, Drying Temp. up to 70°C Indirect Gasburner approx 300KW (-10°C - +20°C) Software in delivered switch box Iijdpfx Aohzbq Tjnwjc Inlet air ceiling with filter G4/EU4 und NF600PA, Outside air bollom using grids and PS50 glas fiber Light (4x18W) wall integrated LED, 750LUX Grid point weight max750kg

Condition: used, Year of construction: 1992, functionality: limited functionality, Paint booth as shown in the pictures for sale, including crane runway as visible in the images. If dismantled by the buyer, price is negotiable. Iijdpfx Anoy Aldaewoc

Condition: good (used), Year of construction: 2005, Complete industrial paint booth, manufacturer Walther: 1 single booth + 1 double booth. Drawings with dimensions are available upon request. Iiodpfxsxvbdme Anwec