Used Peddinghaus Team Drill for sale (7,622)

Condition: ready for operation (used), DONAU DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm (gearbox) Pedpfx Aoy Uv Tvjfgopt - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Subject to errors and omissions.

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 74500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine for concrete pile drilling, soil improvement, and vibrocompaction. Carrier device Sennebogen SR25BT (manufactured in 2008) with drilling attachment Delmag RH18 (manufactured in 2009). Drill table stroke 12.50m, total height 19.91m. Outreach 3.165 - 4.00m. Feed winch, winch for feed with freewheel, auxiliary winch, rear platform. Drill table SHT25, THE KDK ROTARY DRILL HEAD BT180-2 IS NOT PRESENT, PURELY A SOIL IMPROVEMENT DEVICE, drilling gearbox MBDA 3500 ABI. With single auger. NO Kelly bar. Mast support cylinder, automatic alignment. Hydraulic telescopic undercarriage with a width from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at BH 3.304. Drills and drilling accessories are available separately. Also available is a mobile mixing plant, brand MAT, consisting of a mixing container (throughput capacity 20m3/h), conveyor screw, mixing tank (capacity 4,000l), and plunger pump with remote control. The condition of the machine corresponds to the value of the operating hours. At the time of inspection in 2023, the machine was running/functioning without any abnormalities. As of October 2024, storage damages have occurred to valves, control, and hydraulic hoses. It is not possible to operate the machine with 2 attachments at the same time. The machine shows wear and tear appropriate to its age, mileage, and purpose of use on pins and bushes as well as signs of use (dents, abrasions, etc.). The machine was not tested under load. The machine was used with 55 and 80 paddles. After service and maintenance of the storage damages, the device is ready for use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40844 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Pjdsy Umklepfx Afgjpt

Year of construction: 1997, condition: ready for operation (used), Offered is an automatic fitting drilling machine. Workpiece size L: 100-1350mm, W: 100-600mm, d: 16-25mm, operating pressure: 6-7bar, extraction air speed: 30m/s, extraction volume flow: 70m³/min, working height: 1000mm, traverse speed X-axis: 60m/min, traverse speed Y-axis: 50m/min, control system: Ferrocontrol CNC. Equipped with vibratory feeder for hinges, spiral vibratory feeder for buffers, drilling and insertion units, light barrier monitoring. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 5500mm/2200mm/2400mm. Inspection possible by arrangement. Ppjdpfsy Ulmfjx Afgot

Year of construction: 1999, condition: ready for operation (used), Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement. Ppsdpoy Ull Usfx Afget

Condition: ready for operation (used), Year of construction: 2000, Column drilling machine MAXION / IXION BS 25 ST - G -Well-maintained, good overall condition -CE marking -Year of manufacture 2000 -Drilling capacity / steel 25mm -Threading device up to M20 Psdpfx Afjy Um Iwegjpt -Spindle mount / Morse taper MK 3 -Drilling stroke / spindle stroke 120mm -Overhang 260mm -Speed range / continuously variable 120-2160 rpm -Automatic feed -Work table size 500x365mm -Column diameter 110mm -Distance / spindle - table 90-760mm -Drive power 1.5 KW -Drill chuck Dimensions: L x W x H 0.8 x 0.5 x 2 meters / Weight 300kg Errors and omissions excepted.

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Pjdpfovvi I Rex Afgspt

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Pedpfx Afevvi Auogspt Storage location: Nattheim

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 1,200 mm, total length: 6,400 mm, overall weight: 850 kg, Schraml Clear 13 Special 4 Working height 580 mm Year: 2007 Condition : Good used Open Top Washing height 1300 mm Ppedpfju Nw Szex Afgjt Brushes 4 Also available in lines with drilling machine.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 987 h, Vertical Schraml Drilling Machine Top Drill 130 NC - Usable height: 1300 mm (open top) - Infeed and outfeed: 2900 mm - Glass thickness: 3-30 mm Pedjyuiwaopfx Afgjpt - Overall length: 6000 mm - Width: 2000 mm - Height: 2200 mm - Condition: As new - Year of manufacture: 2011

Condition: used, functionality: fully functional, ELLIOTT PROGRESS NO.3A PILLAR DRILL - HEAVY DUTY INDUSTRIAL Psdpsy N Tikjfx Afgept Robust British-made industrial pillar drill suitable for workshop, fabrication, or engineering use. Make: Elliott Model: Progress no. 3A Type: Geared head Pillar Drill Power: 440v, 3-phase Features: Heavy duty cast construction geared speed selection (approx. 110-1780 rpm) large adjustable table industrial capacity machine Condition: Used complete and in original condition

Year of construction: 2007, condition: excellent (used), functionality: fully functional, IMSA DEEP HOLE DRILLING MACHINE MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS: 1250 mm Podpfeyft Haex Afgopt CROSS AXIS (MILLING QUILL): 380 mm CROSS TRAVEL OF HEAD: 500 mm VERTICAL TRAVEL: 1000 mm ROTARY TABLE SIZE: 1000x800 mm TOTAL MACHINE WEIGHT: 20,000 kg

Condition: used, Year of construction: 2005, functionality: fully functional, New in the offer SCM MB 21 / HOLZKRAFT TECNOMAX MB21 Multi-spindle drilling machine Table width: 905 mm Maximum drilling stroke: 60 mm Drilling spindles: 21 Drill spacing: 32 mm 2 parallel stops Pneumatic tilting drilling block Pneumatic workpiece clamping Pneumatic clamping: 3 Workpiece support: standard table Drilling depth adjustment: turret-type stop Conformity marking: CE mark Weight: 267 kg Space requirements: Length: 1 m Space requirements: Width: 1.1 m Space requirements: Height: 1.3 m Ppodpjzaddfsfx Afgjt

Condition: used, machine/vehicle number: 005836, X axis working area: 3000 mm Y axis working area: 1000 mm Main Electrospindle power: 3.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82 Pjdpfx Ajwuckujfgept

Condition: not inspected (used), This Alzmetall pillar drilling machine, likely from the AB series, will be auctioned off in our online auction entitled "Zink Feinmechanik-Sondermaschinen GmbH - CNC machining centers - tool holders - tools - workshop equipment." Ppjdpfx Aey Uw Ibofget You can find this and many other items from the field of precision mechanics machinery, workshop equipment, CNC technology, CNC accessories, tool holders, and more on our RESTLOS auction platform!

Condition: new, Main Motor Power: 5.5 KW, 380 V Operating Type: Hydraulic Operating Type: Geared Coolant Pump Power: 90 W Drilling Capacity: 63 mm Spindle Taper: MK5 Spindle Stroke (Spindle Travel): 400 mm Spindle-Column Distance: 450-2050 mm Spindle-Table Distance: 400-1600 mm Column Diameter: 450 mm Speed: 20-1600 rpm Number of Steps: 16 Table Size: 950x630x500 mm Spindle Feed: 0.04-3.2 mm/rev (16 steps) Machine Size: 2900x1250x2500 mm Dimensions (L x W x H): 3110x1250x3150 mm Net Weight: 6800 kg Gross Weight: 7150 kg Ppedpfey T H S Hjx Afget

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm Ppodpfxey Ukyqj Afget w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 Ppjdpfx Afey Ukw Njget - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Ppjdpfx Aoy Ukwvsfgjt Total power requirement: 4 kW Machine weight approx.: 4.6 t

Condition: used, Year of construction: 1971, Technical details: max. diameter of face turning: ca. Ø 900 mm revolution per minute: Spindel: 12,5 - 00 / 24 step U/min Psdsu Idtpepfx Afgspt revolution per minute: Planscheibe: 8 - 190 / 12 step U/min feed steps: Planscheibe: 0,03 - 3 / step rapid traverse: alle Bewegungen: 2000 / 4000 m/min tool taper: der Arbeitsspindel: ISO 50 / SK50 table clamping surface:: 700 x 800 table rotating: 360° Grad drill table adjustment: quer: 800 mm max. table load: 1500 kg total power requirement: ca. 11,0 kW weight of the machine ca.: 7800 kg dimension machine xH: 3,0 x 2,0 x 2,6 m dimensions electric cabinet: 1800 x 400 x 1950 mm Ø of the face plate 420mm Movement of the face slide 180mm largest Ø during facing approx. 900mm Longitudinal movement of the column 700mm Vertical movement of the headstock 700mm Feed drive of column, headstock and clamping table: -for spindle operation=0,20 - 10 mm/rev with 34 speeds -for operation with faceplate= 0,16 - 16 mm/rev with speeds Equipment: optical fine measuring device/measuring system Heidenhain for axes X/Y/Z/C-table hydraulics machine feet/footplates control panel with boom *

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min Ppodpfx Afsu Ng Ncjgjt total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 250 mm spindle taper MT: MK 4 spindle speed:: 63 - 710 / 8step U/min feed: 0,07; 0,13; 0,254; 0,42 mm/U Distance spindle/table max.: 600 mm table clamping surface:: Ø 450 mm table rotating: 360 ° clamping table - swivable: ja Grad drill table adjustment: 600 mm column diameter: 215 mm total power requirement: 2,2 kW weight of the machine ca.: 730 kg dimension machine xH: 1,0 x 0,58 x 1,4 m Pjdpfowcygcex Afgept Equipment: Quick-action drill chuck RÖHM Supra 16mm Coolant tank with pump Socket for 220V *

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m Ppodpfx Aowid Uwefgjt weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *

Condition: used, Technical details: Ppedew Th Nlspfx Afget number of spindles: 1000 bore capacity in steel (diameter): 32 mm bore stroke: 200 mm range of revolution per miute: 63 - 1000 U/min bore capacity in cast iron: 50 mm drill spindle - Morse Taper: MK4 spindle throat: 315 mm spindle distance: 475 mm number of drilling stations: 3 headstock adjustment: 280 mm feed:: 0,08 - 1,25 (9 Steps) mm/U distance between table/spindle: 710 mm table surface area: 450 x 560 mm total power requirement: 12,4 kW weight of the machine ca.: 3,1 t dimension machine xH: 2,15 x 1,40 x 2,65 m The previous owner removed a drill spindle with box from the gang drilling machine! *

Condition: used, Year of construction: 1998, Technical details: bore capacity in steel (diameter): 15 mm bore stroke: 100 mm Ppjdpfou Idutjx Afgst threading: M16 number of drilling stations: 3 drill spindle - Morse Taper: 3x MK2 spindle throat: 220 mm spindle distance: 335 mm headstock adjustment: (vertikal) 290 manuell mm feed:: mauell mm/U spindle speed:: 220-1600 / 400-3200 / 800-6400 U/min distance between table/spindle: min./max.: 235/525 mm table surface area: 1270 x 315 mm table adjustment: fest / fix mm total power requirement: nicht bekannt kW weight of the machine ca.: 0,72 t dimension machine xH: 1,4 x 0,8 x 2,25 m incl. cooling water system operation by hand and foot The drilling spindles are equipped as follows: 1x drill chuck 13mm 2x quick chuck 10mm *

Condition: used, Year of construction: 1978, Technical details: bore capacity in steel (diameter): 100 mm arm length: 400 - 2100 mm cantilever adjustment vertical: 100 mm spindle taper MT: 50 drill depth: 415 mm spindle stroke: 400 (Skala) mm column turnable: 360 ° column diameter: Ø 500 mm distance drilling head - clamping area: min./max.: 400 / 1.800 mm number of spindle speeds: 12,5 ... 1.600 / 15 step U/min feed: 0,063 ... 2,5 / 15 step mm/U table clamping surface:: L x B: 2.000 x B: 950 mm total power requirement: ca. 35 kW weight of the machine ca.: o. Würfel = 8,0 t dimension machine xH: 3,40 x 1,16 x 3,51 m further information: - drilling spindle travel horizontal 1.700mm Equipment: - incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, central bore Ø 35mm; 6 T-slots), (vertical surface: 1,000 x 500mm, 3-T-slots) - control panel - coolant system * Ppsdpfxou Id Awj Afgst