Used Pendular Saw With Rollers for sale (15,406)

Condition: new, Description The mobile RS-120 wood chipper from the PROFESSIONAL series is a powerful roller chipper that can be operated with either a 15 hp four-stroke gasoline engine or a tractor (minimum 35 hp). With this device, you can shred branches and wood waste with a diameter of up to 8 cm when operated with the gasoline engine, or up to 10 cm when connected to a tractor. The shredded material is ideally suited as fuel for all types of heating stoves. The wood chipper was developed and manufactured from the outset at the REMET CNC Technology plant. The frame consists of metal profiles with a large support distance, and the extendable, folding inlet hopper is extremely rigid and reinforced. The cutting mechanism is manufactured using CNC machines, which enables precise execution and ensures high quality, accuracy and smooth operation, which in turn supports the durability of the machine and its components. The slip clutch on the cutting mechanism allows the blades to be adjusted and protects against damage from overload. Technical data Weight 270 kg Internal mechanism width 180 mm Max. cutting diameter (fresh softwood): 80/100 mm Max. cutting diameter (fresh hardwood): 65/80 mm Max. cutting diameter (dry hardwood): 50/70 mm Distance between shafts 115 mm Blade thickness 10 mm Gear diameter 200 mm Housing thickness of the chipper 20 mm Cutting blade material Wear-resistant steel with increased hardness Inlet hopper 62/38 cm Dimensions of the wood chipper (hopper folded) L / W / H 120 / 125 / 140 cm Mounting system Three-point linkage Tank volume 3.8 L gasoline Consumption 2.1-3.3 l/h Engine Laedpj Abwwqefx Ahaoh Lifan 190FD 15 hp OHV four-stroke Cutting length (8 blades) 5-10 cm

Condition: new, Light roller conveyors, overall width 640 mm, straight 2 m, with plastic rollers 100 mm · For transporting individual items by gravity (inclination) with a slope of approximately 2-5%, depending on the nature and weight of the conveyed material. · The conveyed material must have a smooth and stable base. · The smallest width of the conveyed material must not be less than 200 mm. Lsdpfx Ao Abwrnehaoah · The conveyed material should rest on at least 3 roller axles. · This determines the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: - ball-bearing mounted and galvanized steel rollers, Ø 48 mm, or - ball-bearing mounted plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available on request. · Curves: inner radius 800 mm (other radii available). · ¹Note: with a spacing of 75 mm, the length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional axle distances available: 50 mm, 125 mm, 150 mm and 200 mm. · Other technical specifications: size: straight 2 m · Overall width: 640 mm · Design: with plastic rollers Size: straight 2 m Spacing (axle distance): 100 mm Conveyor width: 600 mm Design: with plastic rollers Overall width: 640 mm

Condition: new, Description The R-100 STANDARD chipper is a powerful roller chipper specifically designed for shredding branches with a diameter of up to 9 cm. Manufactured at the Remet CNC Technology plant, this wood chipper stands out due to its welded construction, which is completely disassemblable and ensures remarkable rigidity and stability. Thanks to its versatile range of equipment options, the R-100 STANDARD wood chipper can be adapted to various requirements. It can be equipped with a flywheel or a drive wheel, a conveyor belt, or a double bag holder. The conveyor belt can be oriented either to the right or to the rear, depending on the need, to ensure optimal integration into different working environments. With its robust design and the ability to efficiently shred branches up to 9 cm in diameter, the R-100 STANDARD wood chipper represents the ideal solution for reliable wood shredding in various applications. Technical Data Min./Recommended Power 15/25 hp Weight 145 kg Max. Cutting Diameter (fresh softwood) Lasdj Abwucspfx Ahaoh 90 mm Max. Cutting Diameter (fresh hardwood) 80 mm Max. Cutting Diameter (dry hardwood) 70 mm Distance between the shafts 100 mm Blade thickness 10 mm Gear wheel diameter 180 mm Housing thickness of the chipping unit 20 mm Recommended PTO speed 540 rpm Cutting blade material Wear-resistant steel with increased hardness Mounting system Three-point linkage Trailer coupling drawbar force 1000 kg Cutting length (6 blades) 7-14 cm Infeed hopper 62/38 cm

Condition: new, Light roller conveyor, total width 440 mm, straight, 3 m long, with plastic rollers, 100 mm · For transporting individual items by gravity (incline) with a slope of approximately 2-5%, depending on the nature and weight of the conveyed material · The conveyed material must have a smooth and stable base · The minimum width of the conveyed material must not be less than 200 mm · The conveyed material should rest on at least 3 roller axles Ledpfx Ahs Abwn Ajaeah · This results in the required spacing = axle distance · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request) · Rollers: - ball-bearing and galvanized steel rollers, Ø 48 mm, or - ball-bearing plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available on request · Curves: Inner radius 800 mm (other radii available) · ¹Note: with a spacing of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm · Additional available axle distances: 50 mm, 125 mm, 150 mm, and 200 mm · Further technical characteristics, size: straight, 3 m · Total width: 440 mm · Design: with plastic rollers Spacing (axle distance): 100 mm Size: straight, 3 m Design: with plastic rollers Conveyor width: 400 mm Total width: 440 mm

Condition: new, Heavy-duty roller conveyors, 880 mm, 800 mm, 90-degree curve, 75 mm * In some cases, light-duty roller conveyors may reach their load limits, or particularly harsh operating conditions may require a robust design. * The combination of a high-load-capacity frame for heavy-duty conveyors, coupled with the proven steel roller, Ø 50 mm, offers versatile application possibilities. * The modular design allows for easy adaptation to spatial conditions and simple assembly. * Intermediate lengths are available at any time. * Design: U-profile frame 40/80/40 x 3 mm, galvanized, with steel tube rollers, galvanized, Ø 50 x 1.5 mm, with spring axle, curves with bolted axle. * Curves: Internal radius 1000 mm (different radii available on request). * Load capacity: Recommended for piece weight up to 200 kg/m (approximate value) as a uniformly distributed line load between two supports, depending on the design and support spacing. Lajdpfx As Abv Ubehaoh * Suitable material to be conveyed, handling, and operating conditions are prerequisites. * Load rollers with Ø 60/80/89 mm are available for higher load capacities. * Other divisions (roller spacing) and conveyor widths are available on request. * Other technical specifications: Overall width: 880 mm Division (axle spacing): 75 mm Size: 90° curve Overall width: 880 mm Conveyor width: 800 mm

Condition: new, Heavy-duty roller conveyors, 580 mm, 500 mm, straight, 3 m, 75 mm * In some cases, light-duty roller conveyors may reach their load limits, or particularly demanding applications may require a more robust design. * The combination of a high-capacity frame structure for heavy-duty conveyors and the proven steel roller, Ø 50 mm, offers versatile application possibilities. * The modular design allows for easy adaptation to spatial conditions and simple assembly. * Intermediate lengths are available at any time. * Design: U-profile frame 40/80/40 x 3 mm, galvanized, with steel tube rollers, galvanized, Ø 50 x 1.5 mm, with spring axle, curves with bolted axle. * Curves: Inner radius 1000 mm (different radii available upon request). * Load capacity: recommended for piece weights up to 200 kg/m (approximate value) as a uniformly distributed line load between two supports, depending on the design and support spacing. * Suitable conveying material, handling, and operating conditions are prerequisites. * Load-bearing rollers with Ø 60/80/89 mm are available for higher load capacities. * Other roller spacings and conveyor widths are available upon request. * Other technical specifications: overall width: 580 mm Conveyor width: 500 mm Pitch (axle spacing): 75 mm Size: Straight, 3 m Overall width: 580 mm Ljdpfx Ahs Abv Nfeaoah

Condition: new, Metal circular saw blade STA D. 355mm B. 2.4mm HM, bore diameter 25.4mm, Z. 80, METALLKRAFT · For MTS 356 · Dimensions: 355 x 2.4 x 25.4 mm · Other technical features: Material: Steel Ledpfx Ae Abzikohaeah Number of teeth: 80 Material: Steel

Condition: new, Light roller conveyors, overall width 540 mm, straight 2 m with steel rollers, galvanized, 75 mm. * For transporting individual items by gravity (downhill). Inclination approx. 2-5%, depending on the nature and weight of the conveyed goods. * The conveyed goods must have a smooth and stable base. * The smallest width of the conveyed goods must not be less than 200 mm. * The conveyed goods should rest on at least 3 roller axes. * This results in the required pitch = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available upon request). * Rollers: ball-bearing mounted, galvanized steel rollers, Ø 48 mm, or ball-bearing mounted plastic rollers; ball-bearing mounted plastic rollers with stainless steel balls available upon request. * Curves: inner radius 800 mm (other radii available). * ¹Note: with a pitch of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. * Additional axle distances available: 50 mm, 125 mm, 150 mm, and 200 mm. * Further technical specifications: Size: Straight 2 m. * Overall width: 540 mm. * Design: with steel rollers, galvanized. Size: Straight 2 m Lsdpfx Ahs Abvuhoasah Design: with steel rollers, galvanized Overall width: 540 mm Pitch (axle distance): 75 mm Conveyor width: 500 mm

Condition: new, Light roller conveyors, total width 540 mm, straight 1 m, with steel rollers, galvanized, 100 m · For transporting individual items by gravity (downhill), with a slope of approximately 2 - 5%, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This determines the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: ball-bearing, galvanized steel rollers, Ø 48 mm, or ball-bearing plastic rollers, ball-bearing plastic rollers with stainless steel balls available on request. · Curves: inner radius 800 mm (different radii available). · ¹Note: with a spacing of 75 mm, the length delivered will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional available axle distances: 50 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: Size: Straight 1 m. · Overall width: 540 mm. · Design: with steel rollers, galvanized. Design: with steel rollers, galvanized Size: Straight 1 m Overall width: 540 mm Conveyor width: 500 mm Spacing (axle distance): 100 mm Ledpfx Ao Abvuushaeah

Condition: new, Light roller conveyors, overall width 640 mm, straight, 2 m, with steel rollers, galvanized, 75 mm. · For transporting individual items by gravity (downhill), inclination approx. 2–5 %, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axes. Lsdpfe Abvvfsx Ahasah · This results in the required pitch = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: ball-bearing, galvanized steel rollers Ø 48 mm, or ball-bearing plastic rollers; ball-bearing plastic rollers with stainless steel balls available on request. · Curves: internal radius 800 mm (different radii available). · ¹Note: with a pitch of 75 mm, the following lengths are supplied instead of 1000 mm – length 975, instead of 2000 mm – length 1950. · Additional axle distances available: 50 mm, 125 mm, 150 mm, and 200 mm. · Further technical characteristics: size: straight, 2 m. · Overall width: 640 mm. · Design: with steel rollers, galvanized. Track width: 600 mm Overall width: 640 mm Size: straight, 2 m Design: with steel rollers, galvanized Pitch (axle distance): 75 mm

Condition: new, Light roller conveyors, total width 640 mm, straight, 3 m, with steel rollers, galvanized, 75 mm. · For transporting individual items by gravity (slope), inclination approx. 2-5%, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. Laeds Abvvljpfx Ahash · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This results in the required pitch = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: ball-bearing mounted, galvanized steel rollers, Ø 48 mm, or ball-bearing mounted plastic rollers; ball-bearing mounted plastic rollers with stainless steel balls available on request. · Curves: inner radius 800 mm (different radii available). · ¹Note: with a pitch of 75 mm, the length is 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional available axle distances: 50 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: Size: Straight, 3 m. · Total width: 640 mm. · Design: with steel rollers, galvanized. Design: with steel rollers, galvanized Size: Straight, 3 m Conveyor width: 600 mm Pitch (axle distance): 75 mm Total width: 640 mm

Condition: new, Light roller conveyors, total width 640 mm, straight, 2 m, with steel rollers, galvanized, 100 mm · For transporting individual items by gravity (downhill), inclination approx. 2 - 5%, depending on the nature and weight of the conveyed goods · The conveyed goods must have a smooth and stable base Laedpfx As Abvvxshaeh · The smallest width of the conveyed goods must not be less than 200 mm · The conveyed goods should rest on at least 3 roller axles · This results in the required pitch = axle spacing · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request) · Rollers: ball-bearing, galvanized steel rollers, Ø 48 mm, or ball-bearing plastic rollers, ball-bearing plastic rollers with stainless steel balls available on request · Curves: inner radius 800 mm (different radii available) · ¹Note: with a pitch of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm · Additional available axle spacings: 50 mm, 125 mm, 150 mm and 200 mm · Other technical specifications: Size: Straight, 2 m · Total width: 640 mm · Design: with steel rollers, galvanized Design: with steel rollers, galvanized Pitch (axle spacing): 100 mm Total width: 640 mm Size: Straight, 2 m Conveyor width: 600 mm

Condition: new, Ball table, type AD 115, straight, 1 m, spacing 75 mm, lane width 400 mm * For installation between roller and ball transfer unit lanes at distribution, turning, or sorting points, as well as for use as independent work tables. * In combination with roller and ball transfer unit lanes, the side profiles are adapted to the respective system. * Ball tables are manufactured in any desired size and ball spacing, as well as for heavy loads; therefore, please always specify the required load capacity. * Supports: for heavy tables or special sizes, available upon request. * In combination with light roller lanes, see table. * Design: Tabletop made of 4 mm thick steel sheet, additionally reinforced with struts. Ball rollers Ø 15 mm, housing galvanized, load capacity of individual ball roller 50 kg, ball rollers Ø 22 mm available upon request. * Coating: blue, RAL 5015. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. * Other technical features: Overall width: 440 mm Ljdpfx As Abu Dhehaeah Overall width: 440 mm Size: Straight, 1 m Spacing (center distance): 75 mm Lane width: 400 mm

Condition: new, Ball table, type AD 115, track width 500 mm, straight 1 m, pitch 100 mm · For installation between roller and small roller conveyors at distribution, turning, or diverting points, as well as for use as independent work tables. · When used in conjunction with roller and small roller conveyors, the side profiles are adapted to the respective system. · Ball tables are manufactured in any desired size and with any desired ball spacing, and also for heavy loads; therefore, please always specify the required load-bearing capacity. · Supports: for heavy tables or special sizes, available upon request. · In conjunction with light roller conveyors, see table. · Design: Tabletop made of 4 mm thick steel sheet, additionally supported by struts. Ball rollers, Ø 15 mm, housing galvanized, load-bearing capacity of the individual ball roller 50 kg, ball rollers, Ø 22 mm, available upon request. · Coating: blue, RAL 5015. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. · Other technical specifications: Overall width: 540 mm Ledpfxo Abu Efo Ahaeah Track width: 500 mm Pitch (axle spacing): 100 mm Size: Straight 1 m Overall width: 540 mm

Condition: new, Ball table, type AD 115, track width 600 mm, straight, 0.5 m, spacing 100 mm * For installation between roller and skatewheel conveyors at distribution, turning, or sorting points, as well as for use as independent work tables. * In combination with roller and skatewheel conveyors, the side profiles are adapted to the respective system. * Ball tables are manufactured in any desired size and ball spacing, and for heavy loads; therefore, always specify the required load-bearing capacity. * Supports: for heavy tables or special sizes, available upon request. * In combination with light roller conveyors, see table. * Design: Tabletop made of 4 mm thick steel sheet, additionally reinforced with bracing. Ball rollers Ø 15 mm, housing galvanized, load-bearing capacity of individual ball roller 50 kg, ball rollers Ø 22 mm available upon request. * Painting: blue, RAL 5015. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. Ljdpe Abu Exjfx Ahaeah * Other technical specifications: Overall width: 640 mm Track width: 600 mm Spacing (center distance): 100 mm Overall width: 640 mm Size: Straight, 0.5 m

Condition: new, Roller conveyor systems, 300 mm, number of axles: 36 · Design: with ball-bearing-mounted support rollers made of blue plastic tubing, Ø 50 x 2.8 mm · Optionally with ball-bearing-mounted support rollers made of galvanized steel tubing, Ø 50 x 1.5 mm · With spacer tube, Ø 10 mm Ljdpfo Abu E Sjx Ahaoah · Axle diameter: 8 mm · All steel parts are galvanized · Each support foot has 2 lockable swivel casters with solid rubber tires · Conveyor width: 300 mm, 400 mm, 500 mm, or 600 mm, whereby the conveyed goods can also be wider and protrude laterally · Roller spacing: continuously adjustable from approx. 55 mm to approx. 130 mm, depending on the extended length · Height adjustment range: standard from approx. 700 mm to 1100 mm. · Delivery of intermediate lengths, special widths, and special heights is possible Number of rollers per axle: 1 Number of support feet: 3 Extendable up to max.: 1.9 - 4.4 m Conveyor width: 300 mm Load capacity between 2 supports: 100 kg Axle diameter: 8 mm Number of axles: 36

Condition: new, Ball table, type AD 115, straight, 1 m, spacing 100 mm * For installation between roller and small roller conveyors at distribution, turning, or sorting points, as well as for use as independent work tables. * In combination with roller and small roller conveyors, the side profiles are adapted to the respective system. Ljdpfxe Abu E Ee Ahaeah * Ball tables are manufactured in any desired size and with any desired ball spacing, and also for heavy loads; therefore, please always specify the required load-bearing capacity. * Supports: for heavy tables or special sizes, available upon request. * In combination with lightweight roller conveyors, see table. * Design: Tabletop made of 4 mm thick steel sheet, additionally reinforced with struts. Ball rollers Ø 15 mm, housing galvanized, load-bearing capacity of a single ball roller 50 kg, ball rollers Ø 22 mm available upon request. * Painting: blue, RAL 5015. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. * Further technical specifications: overall width: 640 mm Size: Straight, 1 m Overall width: 640 mm Spacing (center distance): 100 mm Conveyor width: 600 mm

Condition: new, Roller conveyor, 300 mm, number of axles: 50 Lajdpfxe Abu Hcj Ahash * Design: with ball-bearing supported rollers made of blue plastic tubing, Ø 50 x 2.8 mm * Optionally with ball-bearing supported rollers made of galvanized steel tubing, Ø 50 x 1.5 mm * With spacer tube, Ø 10 mm * Axle diameter: 8 mm * All steel parts are galvanized * Each support foot has 2 lockable swivel casters with solid rubber tires * Conveyor width: 300 mm, 400 mm, 500 mm or 600 mm, whereby the conveyed goods can also be wider and protrude laterally * Roller spacing: continuously adjustable from approx. 55 mm to approx. 130 mm, depending on the extended length * Height adjustment range: standard from approx. 700 mm to 1100 mm * Delivery of intermediate lengths, special widths and special heights is possible Conveyor width: 300 mm Axle diameter: 8 mm Number of rollers per axle: 1 Load capacity between 2 supports: 100 kg Extendable up to max.: 2.7-6.2 m Number of support feet: 4 Number of axles: 50

Condition: new, Lightweight roller conveyors, 440 mm, 400 mm, straight, 2 m, curved roller, 75¹ mm * For transporting individual items using gravity (slope), inclination approximately 2-5%, depending on the nature and weight of the conveyed material. * The base of the conveyed material can have longitudinal supports or circumferential ring strips, provided that they rest on the rollers. Ljdpfx As Abvdcshaeah * Since the support rollers protrude, oversized conveyed material can also be transported. * Different intermediate lengths are available on request. * The conveyed material should rest on at least 3 support rollers. * This determines the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request). * Support rollers: Plastic tube Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube available on request. * Curves: Inner radius 800 mm, support rollers continuous or divided into multiple sections depending on the conveyor width. * ¹Note: With a spacing of 75 mm, the following lengths are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied; instead of a length of 2000 mm, a length of 1950 mm is supplied. * Additional available axle distances: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Further technical specifications: Overall width: 440 mm Conveyor width: 400 mm Design: with plastic rollers Spacing (axle distance): 75¹ mm Size: Straight, 2 m Overall width: 440 mm

Condition: new, Lightweight roller conveyors, 440 mm, 400 mm, 90-degree curve, model Ku.-RL 75¹ mm · Designed for transporting individual items by gravity (slope), with an inclination of approximately 2-5%, depending on the nature and weight of the conveyed material. · The base of the conveyed material can have longitudinal bars or continuous ring strips, provided that they rest on the rollers. · Since the support rollers protrude, oversized conveyed material can also be transported. · Alternative intermediate lengths are available upon request. · The conveyed material should rest on at least 3 support rollers. · This determines the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available upon request). · Support rollers: plastic pipe Ø 50 x 2.8 mm, ball-bearing mounted; steel pipe, galvanized Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel pipe available upon request. · Curves: inner radius 800 mm, support rollers continuous or divided into multiple sections depending on the conveyor width. · ¹Note: with a spacing of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied; instead of a length of 2000 mm, a length of 1950 mm is supplied. · Additional available axle distances: 62.5 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: overall width: 440 mm. Size: 90° curve Design: with plastic rollers Laedpfx Ahj Abvdpjajh Overall width: 440 mm Conveyor width: 400 mm Spacing (axle distance): 75¹ mm

Condition: new, Lightweight roller conveyors, 440mm, 400mm, straight, 1m, steel rollers, 100mm · For transporting individual items by gravity (incline). Inclination approx. 2 - 5%, depending on the nature and weight of the conveyed goods. · The bottom of the conveyed goods may have longitudinal supports or continuous ring strips, provided that they rest on the rollers. · Since the support rollers protrude, oversized conveyed goods can also be transported. · Different intermediate lengths are available on request. · The conveyed goods should rest on at least 3 support rollers. · This results in the required pitch = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). · Support rollers: plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted; steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel tube on request. · Curves: inner radius 800 mm, support rollers continuous or divided into multiple sections depending on the conveyor width. · ¹ Note: with a pitch of 75 mm, the following lengths are supplied: instead of 1000 mm length – 975 mm length, instead of 2000 mm length – 1950 mm length. Additional axle distances available: 62.5 mm, 125 mm, 150 mm and 200 mm. · Other technical characteristics: overall width: 440mm Conveyor width: 400 mm Pitch (axle distance): 100 mm Overall width: 440 mm Lsdpfx Aho Abvd Aoasah Size: Straight, 1 m Design: with steel rollers, galvanized.

Condition: new, Light roller conveyors, 440mm, 400mm, straight, 2m, steel rollers, 100mm · For transporting individual items by gravity (inclination), with an inclination of approximately 2 - 5%, depending on the nature and weight of the conveyed goods. · The bottom of the conveyed goods may have longitudinal supports or continuous circular rails, provided they rest on the rollers. · Since the support rollers protrude, oversized conveyed goods can also be transported. · Different intermediate lengths are available at any time. · The conveyed goods should rest on at least 3 support rollers. · This results in the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request). Ljdpj Abvd Nefx Ahasah · Support rollers: plastic tube Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube available on request. · Curves: inner radius 800 mm, support rollers continuous or divided into multiple sections, depending on the conveyor width. · ¹ Note: with a spacing of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm - a length of 975 mm, instead of a length of 2000 mm - a length of 1950 mm. Additional available axle distances: 62.5 mm, 125 mm, 150 mm and 200 mm. · Other technical specifications: overall width: 440mm Conveyor width: 400 mm Size: straight, 2 m Overall width: 440 mm Design: with steel rollers, galvanized Spacing (axle distance): 100 mm

Condition: new, Light roller conveyors, 440mm, 400mm, straight, 2m, curve radius 100mm * For transporting individual items by gravity (inclination), with a slope of approximately 2-5%, depending on the nature and weight of the conveyed material. Laedpj Abvfmofx Ahaoh * The bottom of the conveyed material may have longitudinal supports or circumferential ring profiles, provided they rest on the rollers. * As the support rollers protrude, oversized conveyed material can also be transported. * Different intermediate lengths are available on request. * The conveyed material should rest on at least 3 support rollers. * This determines the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request). * Support rollers: Plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted; steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel tube available on request. * Curves: Internal radius 800 mm, support rollers divided continuously or in multiple sections, depending on the conveyor width. * ¹Note: with a spacing of 75 mm, the following dimensions will be supplied: instead of a length of 1000 mm, a length of 975 mm will be supplied; instead of a length of 2000 mm, a length of 1950 mm will be supplied. * Additional axle distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: Overall width: 440mm Size: Straight, 2 m Spacing (axle distance): 100 mm Design: With plastic rollers Overall width: 440 mm Conveyor width: 400 mm

Condition: new, Scissor roller conveyor, 500 mm width, 64 axles · Design: with ball-bearing-mounted, bright zinc-plated steel rollers · Optionally with 2-row ball-bearing-mounted, blue plastic rollers · Roller diameter: 48 mm · Axle diameter: 8 mm · All steel parts are zinc-plated · Each support leg has 2 lockable swivel casters with solid rubber tires · Conveyor width: 300 mm, 400 mm, 500 mm or 600 mm, whereby the conveyed material can also be wider and protrude laterally · Roller spacing: continuously adjustable from approximately 32 mm to approximately 130 mm, depending on the extended length · Height adjustment range: standard from approximately 700 mm to 1100 mm · Delivery of intermediate lengths, special widths, and special heights is possible. Extendable up to a maximum of: 2.2 - 7.9 m Lsdpfxs Abu Sfs Ahaoah Conveyor width: 500 mm Number of axles: 64 Number of support legs: 5 Load capacity between 2 supports: 120 kg Number of rollers per axle: 5 Axle diameter: 8 mm

Condition: new, Scissor-type roller conveyors, 600 mm, number of axles: 50 · Design: with ball-bearing, bright zinc-plated steel rollers · Optionally available with 2-row ball-bearing, blue plastic rollers · Roller diameter: 48 mm · Axle diameter: 8 mm · All steel parts are zinc-plated · Each support leg has 2 lockable swivel casters with solid rubber tires · Conveyor width: 300 mm, 400 mm, 500 mm or 600 mm, whereby the conveyed goods can also be wider and overhang on the sides · Roller spacing: continuously adjustable from approximately 32 mm to approximately 130 mm, depending on the extended length · Height adjustment range: standard from approximately 700 mm to 1100 mm · Delivery of intermediate lengths, special widths and special heights is possible. Extendable up to max.: 1.7 - 6.2 m Conveyor width: 600 mm Number of support legs: 4 Number of rollers per axle: 6 Lasdps Abu Sxjfx Ahaoh Axle diameter: 8 mm Number of axles: 50 Load capacity between 2 supports: 120 kg