Used Pme High Speed Press for sale (54,561)

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min Lredpfx Aoxp Na Njkysn MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm Lodpjvphiyjfx Akyorn * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Lsdpsynt Ucofx Akysrn Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Lrjdpfx Ajquhbgskysn Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, High-speed milling spindle HENNINGER, Type 801 - N 503 Maximum speed: 6000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Ledpfxjfxg T Uo Akysrn Overhang: 110 mm (machine spindle to chuck) Tool holder: SK 40 - S20x2 Collets: Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm in a wooden storage box The head is equipped with bronze gears for high torque. Weight: 5 kg Total weight: 9.4 kg in good condition

Condition: good (used), ManuMatik / KraussMaffei high-pressure cylinders  The high-pressure cylinders come from a commutator press and were in use there until the end.  Total height 184 cm Cylinder height 150 cm Circumference of the rod 28 cm Diameter 8.90 cm The following components are included  Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery 1 x pressing unit Complete factory lock, Lrsdshtyxlopfx Akysn large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Lredpfx Akeymnykoyjn Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Lrsdpfx Akeylnpisyjn Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Ledpfxovtpdgj Akyorn Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, Long-bed pendulum machining Control: 3-axis CNC path control, Siemens 840 D (E305-1) Lsdpfx Aksxwwc Usysrn TECHNICAL DATA Working area X-axis 2600 mm Y-axis 520 mm Z-axis 630 mm Pendulum operation 2 x 860 mm Table clamping surface 3440 x 570 mm Automatic tool changer Number of tools 40 Tool holder (DIN 69871) SK 40 Tool change time 2.0 sec Max. drive power 18.5 kW Speed range up to 10,500 rpm EQUIPMENT/ACCESSORIES - Automatic tool changer ATC 40 - Long part machining/pendulum machining (center partition not included) - Splash guard enclosure with sliding doors, electrically secured, incl. machine light - Coolant unit with high-pressure pump and paper band filter Tank capacity 500 l, normal pump 200 l/min at 1.5 bar High-pressure pump 50 l/min at 20 bar, incl. double switch filter - Through-spindle coolant supply (IKZ) - Chip conveyor with ejection height 1050 mm - Rinsing gun - 1 NC rotary table with chuck - 1 hydraulic tailstock - 1 clamping bridge - Electronic handwheel - Mounting elements - Documentation

Condition: ready for operation (used), Year of construction: 2004, A machining center Chiron, which was completely overhauled in 2013, is available. Travel path X/Y: 6000mm/630mm, rapid traverse: 60m/min, tool positions: 92, tool holder: HSK-A63, speed: 12000rpm, torque: 140Nm, milling axes: 5, weight: approx. 20000kg, control: Siemens S840D, operating hours: 77344h. Includes scraper belt conveyor, OKZ preparation, Knoll VRF 250 vacuum rotary filter, high-pressure pump (70bar), emulsion mist extraction (2x800m³/h), central partition for pendulum machining, hydraulic unit (210bar), and Kohn linear clamping system with 8x hydraulic vices Multi 2000MFS 125/680 HD. Documentation available. An on-site inspection is possible. Lredpfxew Nyi Ne Akysn

Condition: ready for operation (used), A total of 10 deionization devices Keyence are available. Ion generation: +/-7000V, ion balance: +/-30V, max. effective range: approx. 3000mm, working distance range: 50mm-2000mm, electrode material: tungsten, applications: plastics/films/coating/electronics/packaging. Documentation available. An on-site inspection is possible. Lrsdpfx Aew R U Agekysn

Condition: ready for operation (used), Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible. Lrsdpfxjycwrbs Akyjn

Year of construction: 1994, condition: ready for operation (used), A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible. Lrsdpfowv Umqex Akyen

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM1000.3200 H-323.41.6000.6E 130.20, Load capacity 3.2t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 3M Operating voltage 400V Lrjdjvx E Ixopfx Akyen Control voltage 230V Flange width 300mm Available immediately in stock

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Several immediately available in stock Ledpfjvx E I Sex Akyjrn

Year of construction: 2021, condition: ready for operation (used), Suitable for the separation of free oils from cooling lubricants, max. output: 500l/h, max. liquid temperature: 70°C, pH value: 6-9, length: 620mm, width: 510mm, height: 1140mm, weight: 60kg, with documentation. Lrjdpfek E Nccjx Akyen

Condition: used, Year of construction: 1978, 40 1008 rated current 20 A Lsdjwg Hunepfx Akyjrn voltage 24 V weight of the machine ca. 3,5 t

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm Lodpjwz Nzmefx Akysrn - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: used, Year of construction: 2014, x-travel 550 mm y-travel 320 mm Lredpfxotycrne Akyjn z-travel 420 mm

Condition: excellent (used), High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz Ovp -Type: 6ES5 385-8MB11 -Number: 3x High Speed Counter available Ljdpfxsb Nkuhs Akyorn -Price: per package -Dimensions box: 140/110/H60 mm -Weight: 0.3 kg/piece

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm Lrsdpfjirax Uox Akysn -Weight: 1500kg

Condition: used, High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly Ljdpfxeh Db H Ds Akyorn -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz -Type: 6ES5 385-8MB11 -Number: 2x Modul available -Price: per package -Dimensions: 100/45/H135 mm -Weight: 0.2 kg/pc.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Lsdpjyhdvkofx Akyorn Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design Ljdpou Aa I Sefx Akyorn - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB