Used Power Chucks for sale (39,002)

Year of construction: 2025, condition: used, New: Yes Isdpfx Ajxdhfgjdkjtg Empty weight: 35 kg Dimensions of cargo space: 54 x 29 x 58 cm CE mark: yes Serial number: 25050168 Please contact Team DPX for more information

Condition: used, OKUMA POWER SUPPLY 5000T E0451-521-038 . 03487 Ijdpfx Adsy Suyvekstg

Condition: used, diameter 310 mm hollow ca. 100 mm chuck width / mm weight / kg - three-jaw chuck - dimension Ø200mm Itedpfx Ajy Suqnsdksg - Passage: Ø80mm

Condition: used, diameter 430 mm hollow ca.165 mm chuck width 120 mm Diameter: Ø430mm Passage: approx. 165mm Itodpfoy Supdsx Adkeg Chuck width: 120mm Weight: 75kg

Condition: used, Indramat power supplies and drives Iedpfjxrf Twox Adkotg

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW Itedpfol Nbqcsx Adksg mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH Hydraulic unit Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010 Pressure output: 55 bar Delivery rate: 13 L/min. Tank capacity: approx. 20 liters Engine power: 1.5 kW Speed: 1440 rpm. Mains connection: 400 volts, 50 Hz - Unit was used for an operating pressure of approx. 80 bar - 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar - 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump - Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 - 2 hydraulic pressure accumulators Itedpfxsv Ev Dqj Adkeg - 1 replaceable filter cartridge - 1 pressure sensor IFM, type TR7 430 - 1 oil sight glass - Hydraulic connections 2x 18L - Sold without oil content Space requirement L x W x H: 700 x 450 x 850 mm Weight: 105 kg very good condition

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition Itodpfx Adeu Axzkjkog

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit Iodpfx Aoyl Avwodkstg DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2008, operating hours: 8,948 h, functionality: fully functional, spindle speed (max.): 9,500 rpm, feed length X-axis: 470 mm, feed length Y-axis: 330 mm, feed length Z-axis: 660 mm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 4,500 kg, grinding length: 350 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, grinding spindle motor power: 11,500 W, input voltage: 400 V, year of last overhaul: 2026, CNC Tool grinding machine WALTER Helitronic Power TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC Series 31i-model A5 Software installed: Tool Studio 3 Number of axes: 5 Height of centers: 145 / 190 [mm] Stroke X axis: 470 [mm] Rapid traverse rate X axis: 15000 [mm/min] Stroke Y axis: 330 [mm] Rapid traverse rate Y axis: 15000 [mm/min] Stroke Z axis: 660 [mm] Rapid traverse rate Z axis: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding lenght: 350 [mm] Max. grinding diameter: 320 [mm] Max. grinding wheel speed: 9500 [rpm] Grinding spindle motor power: 11.5 [kW] Max. diameter grinding wheel: 200 [mm] Number of hours under power: 8948 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 120 [l/min] Lubrication tank capacity: 400 [l] Supply voltage: 400 [V] Total power required: 25 [kVA] Weight: 4500 [Kg] INCLUDED EQUIPMENT: x1 TOOLSTUDIO 3 software x1 direct-drive A axis (Hollow Shaft) x1 automatic tool clamping system x1 RENISHAW LP2 part probe x1 DSL Air Technology type AES-GAMMA 30 mist extractor x1 lubrication tank + paper filtration system x1 GRUNDFOS coolant pump x35 grinding wheel holders (equipped with CBN wheels) x22 ISO50 attachments Iedpfsy Sxrpjx Adkotg x1 SCHUNK collet holder x22 collets x1 NIKKEN collet holder x13 NIKKEN collets x1 metal rack for grinding wheel holders and ISO50 attachments 1x ISO50 calibration mandrel intended for axis calibration 1x calibration disc intended for axis calibration x1 set of service wrenches Various technical manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Machine similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinding machines, lathes, machining centers, and milling machines.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Isdpfx Ajy R Npiedketg Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Various pistons / cylinders available. Cevoman bvba. Itodoy R Nu Eopfx Adkog Lenskensdijk 5 2200 Herentals Belgium

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 30 mm Itjdpfx Aoy R Sm Rodkog -Dimensions: see photo technical drawing -Overall dimensions: 135/125/H75 mm -Total weight: 5.9 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H67 mm -Total weight: 5.3 kg Itjdpfxsy R Slms Adksg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H48 mm Isdpfxsy R Sg De Adkjtg -Total weight: 1.4 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Isdpfx Adjy R Sgdskotg -Top jaws: Rotating jaw set, 4-piece -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 3.0 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing Iedey R R Ndopfx Adketg -Overall dimensions: 90/90/H56 mm -Total weight: 2.0 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm Itjdpfxey R R I Te Adkog -Total weight: 2.1 kg

Condition: new, Year of construction: 2023, Year of manufacture: 2023 General condition: very good Itodpfjwlhgiex Adkog Technical condition: very good Visual condition: very good 4 x HMF 2320K-RCS K6 MOBILE CRANES 2023 (NEW) Electronic speed adjustment, HDL-d Fly brake control Progressive crane control Priority flow control Dual Power plus articulated boom system Proportional control valve PVG 32 Internal hose routing Environmentally friendly high-quality coating RCL safety system 5-6 functions available Winch ready Radio remote control

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm Iodpjgu Nmhjfx Adketg - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: ready for operation (used), Year of construction: 2011, operating hours: 56,000 h, functionality: fully functional, type of input current: AC, power: 10,000 kW (13,596.20 HP), input voltage: 11,000 V, fuel: domestic gas H, Equipment: documentation/manual, 5 CHP units of 2 MW each with Caterpillar engine generator sets, each rated at 2.5 MVA, 10.5 kV generator output, operating hours range from 26,000 to 54,000. Fuel types: natural gas and methane. The units have been decommissioned and fully preserved by the operator. Each unit comes as a complete small building, including heat extraction systems. Full documentation and maintenance records are available. Site inspections can be arranged at short notice. Available until late 2026 from Western Europe. The units are immediately ready for relocation, with dismantling to be carried out by the buyer. Isdpfx Aoy R Ebbjdketg Asking price: €1,459,000 (USD 1,699,000) for all 5 units. The units will be sold as seen and must be relocated from the site by the buyer.

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 Itedpfx Aeu R Sy Aedkeg - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: used, Year of construction: 2013, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 5,089 m³/h, suction capacity: 5,089 m³/h, intake manifold diameter: 300 mm, actuation type: electric, overall weight: 972 kg, We are offering this used AL-KO POWER UNIT 300 P mobile extraction system, year of manufacture 2013. The extraction unit is in good condition and was kept in a heated room. The filters are clean and can be easily shaken off. Type: POWER UNIT 300 P Serial number: 2433358790 Year of manufacture: 2013 Suction nozzle: 300 mm Rated speed: 2,895 rpm Rated air flow: 5,089 m³/h Rated current: 13.8 A Negative pressure at rated air flow: 2,050 Pa Protection class: IP 54 Motor power: 7.5 kW Weight: 972 kg Itodpfx Ajy Akfpsdkjg Voltage/phase/frequency: 400/3~/50 Hz Max. compressed air connection: 8.5 bar Fuse: 25 A Filter number: 85101201 Filter category: Cat. M automatic gate/slide valve control If you have any questions or need further information, feel free to send us a message or call us.

Condition: used, Year of construction: 2010, operating hours: 13,800 h, power: 1,600 kW (2,175.39 HP), For sale are 3 MTU cogeneration modules / CHP plants manufactured by MTU Onsite Energy GmbH, model AoE16V4000L62, year of manufacture 2010. These plants are ideally suited for decentralized energy generation and combined heat and power (CHP) applications. Itsdpfxeyt H H No Adkjg Technical specifications (per documentation): * Electrical output: 1,600 kW * Thermal output: 1,746 kW * Gas power: Pgaz PCS 4,579 kW / Pgaz PCI 4,121 kW * Voltage / Frequency: 400 V / 50 Hz Operating hours: * GE1: 42,479 h * GE2: 13,800 h * GE3: 43,397 h The scope of supply, as per documentation, includes a comprehensive range of auxiliary equipment and system components, including: roof-mounted air cooler, auxiliary cabinet, control cabinet, exhaust heat exchanger, water heat exchanger, pipework and ducts with chimney, oil storage room with 3 tanks and piping, as well as electrical cabling. These plants represent an attractive solution for operators, resellers, and projects in the fields of energy supply, industry, or for spare parts recovery.

Condition: used, length ~ 450 mm Isdpfsx R Ttlsx Adkotg width ~ 650 mm height ~ 1.100 mm Battery-powered hand strapping tool BW-03 with 2 x battery, charger and Cyklop dispenser and 2.5 rolls of strapping.