Used Pramac Generator for sale (12,830)

Condition: used, YANMAR 4TNV98T diesel generator set, STAGE 0, water-cooled - Three-phase synchronous alternator, self-excited, self-regulating, brushless. - ENGINE EMISSION STAGE "STAGE 0" IS NOT APPROVED FOR MOBILE USE IN THE EU! FOR USE AS AN EMERGENCY POWER SUPPLY ONLY! - VERSION WITH TERMINAL BLOCK CONNECTION FOR BUILDING POWER SUPPLY! (=WITHOUT SOCKETS!) - WITHOUT RCD/MCB! ONLY SUITABLE FOR CONNECTION TO THE BUILDING'S ELECTRICAL SYSTEM! (Available as an option) - Three-phase standby power: 46 kVA (36.8 kW) / 400 V / 66.4 A - Three-phase PRP power: 42 kVA (33.6 kW) / 400 V / 60.6 A - Single-phase PRP power: 15.5 kVA / 230 V / 67.4 A The MOSA GE 45 YSX model is a super-silenced generator set with a 100-liter fuel tank for 13.5 hours of continuous operation. The machine is equipped with a roll bar, lifting hook, forklift entry, and fuel tank, and thanks to the enclosure, the noise level is minimal. With a weight of only 1020 kg, the generator set is compact and easy to transport thanks to its dedicated manual chassis, approved road chassis, or special "tow hitch." It is important to highlight the attention to detail, including the rounded edges of the protective housing, which allow rainwater to drain off more effectively. The machine base must be designed to contain any liquids present in the engine and fuel tank in the event of leaks, preventing dispersion into the environment. When the compound voltage regulator system is connected to the AVR, the latter is replaced by the compound system if a current above the nominal value is required for a short period (e.g., motor start). The dual regulation system is capable of operating with either the compound or the AVR alone, thus providing a higher level of reliability in the event of a failure of one of the two systems. The generator set is designed to be connected to the EAS automatic start control panel to use the unit as an emergency generator in the event of a failure of the main power supply. A TCM remote control allows the engine to be started/stopped from a distance of up to 10 meters from the machine. In conjunction with the "Automatic Control Panel" option, the unit can also be connected to an optional external changeover unit/emergency power automatic transfer switch. Suitable for a wide range of applications such as industrial plants, residential sites, hospitals, events, large construction sites, noise-sensitive environments, and as an emergency power generator. Itodpfx Ajz U Utkeg Ajn INFO - Engine regulation: Mechanical - Generator set monitoring: "AMF 25" - Electronic voltage regulation: "AVR" with three-phase detection - Terminal block connection (without sockets) - Circuit breaker/automatic fuse - Emergency stop button - Waterproof base - Prepared for EAS emergency power automatic transfer switch - Super-silenced - Compliant with EC directives for noise and safety GENERAL - Protection class IP: 44 - Dimensions: 2050x900x1420 mm - Weight (dry): 1020 kg - Measured sound pressure level Lwa (sound pressure LpA): 90 dB(A) (65 dB(A) @ 7m) - Guaranteed sound pressure level Lwa (sound pressure LpA): 91 dB(A) (66 dB(A) @ 7m)

Condition: used, Oil shortage shutdown system Generator overload protection HONDA + Briggs & Stratton OHV engines Large tank for long operating times Compound-regulated high-performance generators at 400 V Engine type: HONDA GX390 / 11 HP Design: 1-cylinder 4-stroke OHV Displacement [cm³]: 389 Power: at 3000 rpm 6.4 CO2 emissions [g / kWh]: 743 CO2 test method: not applicable Iedpfo Aanqfox Ag Ajtn Fuel: Gasoline Tank capacity [l]: 30 Fuel consumption at 75% load [l/h]: 2.1 Operating time at 75% load [h]: 14.3 Starting system: Electric start including battery Sound power level LWA [db(A)]: 97 Sound pressure level LPA (7 m) [db(A)]: 72

Condition: used, H CLASS: 400V / 50 Hz Max. power kVA S1: 40.5 kVA / 32.4 kW Recommended tractor power for drawing max. power: 110 hp PTO speed: 430 rpm Tested according to: Itjdpfxj Aannwe Ag Ajn Mains sockets for domestic use: 1 CEE plug 400 V 63 A IP67 Mains sockets for field use: 1 x CEE plug 400 V 63 A IP67 + 1 x 400 V 32 A IP67 + 1 x 400 V 16 A IP67, 1 Schuko plug IP54 + single-phase thermal protection 4-pole circuit breaker + measuring device for insulation testing + IP65 protection, under/over voltage alarm, alarm for under/over frequency Voltmeter + frequency meter + ammeter + hour meter (digital measuring instrument) PTO shaft not included in the scope of delivery

Condition: used, TECHNICAL DATA WELDING MACHINE Model series WELDARC INTENS Frequency (Hz) 50 Hz Max. power (kW) 5.70 Max. power LTP (kVA) 7.10 Normal welding mode 35% (A) 200 Intensive welding mode 60% (A) 170 Ignition voltage (V) 73 Minimum electrode diameter (mm) 1.6 Maximum electrode diameter (mm) 4 Fuel Gasoline Tank (L) 7.30 Consumption 75% (L/h) 2.60 Autonomy 75% (h) 2.80 TECHNICAL DATA ENGINE Engine brand KOHLER Engine type CH440_C5 Valve arrangement O.H.V. Starting system Recoil start Oil protection Yes Displacement (cm3) Itsdpfx Ago Aamw Ds Aon 429 Oil capacity (l) 1.30 DESCRIPTION OF CONNECTORS AND CONTROL BOX 1 x 230V 10/16A connector - overload protection + 1 x 400V 16A connector - overload protection

Condition: used, The REHLKO DIESEL 6500 TE XL C5 is a three-phase diesel generator for professional applications. The electric start, air-cooled diesel engine, and 16-liter large fuel tank enable reliable operation with up to 13.3 hours of runtime at 75% load. This model was previously also known under the SDMO and Kohler SDMO brands and is now offered under the REHLKO brand. Features: • Three-phase generator with 230 V and 400 V connections • Maximum power 5.2 kW / 6.5 kVA • Air-cooled KD15-440E C5 diesel engine • Electric starter with maintenance-free starter battery • 16-liter large fuel tank for up to 13.3 hours of runtime • Low oil level protection • Ergonomic handles • Sockets with overload protection • Complies with European emission stage Stage V • Generator Smart Care Connections: Itjdpfx Aj Aanudog Asn 1 × 230 V / 10–16 A with overload protection 1 × 400 V / 16 A with overload protection

Condition: used, MOLL-MOTOR PTO Generator ZGN-28/25 The MOLL-MOTOR ZGN-28/25 is a robust PTO generator for agricultural, farm, and industrial applications, as well as for emergency power supply. With a power output of 25 kVA / 20 kW, this generator is suitable for various applications where reliable power needs to be supplied via the tractor. The generator is driven by the tractor’s PTO and is designed for practical use in agricultural and commercial settings. It can be flexibly used wherever a mobile power supply is required. Stable voltage through AVR regulation The electronic AVR voltage regulator ensures a consistent power supply even with different types of loads. The ZGN-28/25 is suitable for unbalanced loads and can be used with various consumers in farm and industrial applications. Iedpfx Aj Aab Tyjg Aotn Features The features include an industrial synchronous generator with 1500 rpm, a 3-phase actual value detection, and a protective shutdown in case of over- and under-frequency, over- and under-voltage, short circuit, overload, and reverse phase sequence. The insulation monitoring system eliminates the need for an earth rod. The generator has a protection rating of IP23. The 63-A main supply with pilot contact enables automatic switching between field operation and building operation.

Condition: used, YANMAR 3TNV88 diesel engine – three-phase synchronous AC generator – three-phase power output 14 kVA (11.2 kW) – single-phase power output 6.5 kVA – water-cooled. The MOSA GE 15 YSX model is a super-silenced generator set with a 55-liter fuel tank, providing 21 hours of continuous operation. The unit is equipped with a roll-over protection structure, lifting hook, forklift entry point, and fuel tank. Thanks to the enclosure, the noise level is minimized. With a weight of only 630 kg, the generator set is compact and easily transportable thanks to its specially designed manual trolley, approved road chassis, or special "towing sled." Notably, to emphasize the meticulous attention to detail, the rounded edges of the protective housing allow rainwater to drain off more effectively. The machine base is designed to collect any liquids present in the engine and fuel tank in the event of leaks, preventing dispersion into the environment. When the output voltage regulation system, Compound, is combined with the AVR, the latter is replaced by the Compound system if a current exceeding the rated value is required for a short period (e.g., engine start). The dual regulation system can operate with either the Compound or the AVR alone, providing a higher level of reliability in the event of a failure of either system. Iedpfxj Aalire Ag Astn The generator set is designed for connection to the EAS automatic start control panel, enabling the unit to be used as an emergency generator in the event of a failure of the main power supply to the available power grid. A TCM remote control allows the engine to be started/stopped from a distance of up to 10 meters from the unit. Suitable for a wide range of applications, including industrial plants, residential sites, hospitals, events, large construction sites, noise-sensitive environments, and as an emergency power generator. Complies with CE directives. INFO - Combined voltage regulation: Electronic AVR + Compound - Sockets: 1x400V 32A 3P+N+T CEE - 1x400V 16A 3P+N+T CEE - 2x230V 16A 2P+T SCHUKO - Emergency stop button - Waterproof base - Prepared for EAS emergency power automatic system GENERAL - IP protection rating: 44 - Dimensions: 1680x770x1190 mm - Weight (dry): 630 kg - Measured sound pressure level Lwa (sound pressure LpA): 86 dB(A) (61 dB(A) @ 7m) - Guaranteed sound pressure level Lwa (sound pressure LpA): 87 dB(A) (62 dB(A) @ 7m)

Condition: used, S Series – Sound-dampened – Honda gasoline engine with recoil starter, electronic voltage regulator AVR, RCD circuit breaker – Three-phase generator, three-phase – Power, three-phase: 7 kVA (5.6 kW), TECHNICAL DESCRIPTION - Power, three-phase, standby: 8 kVA (6.4 kW) - Power, three-phase, PRP: 7 kVA (5.6 kW) - Power, single-phase, PRP: 4 kVA - Frequency: 50 Hz - Sockets: 1x 400V 16A 3P+N+T CEE - 1x 230V 16A 2P+T CEE - 1x 230V 16A 2P+T Schuko - Engine shutdown in case of insufficient oil level, circuit breaker, fuel gauge Version includes the following special equipment: - Electronic voltage regulator AVR - RCD circuit breaker GENERAL DATA - Engine: Honda iGX 390 (electronic speed control) - Fuel tank capacity: 20 l - Running time (75% of PRP): 8.5 h - Measured sound pressure level Lwa (sound pressure level LpA): 96 dB(A) (71 dB(A) @ 7m) Itodpfxo Aampao Ag Asn - Weight (dry): 102 kg - Dimensions (LxWxH): 770 x 520 x 650 mm

Condition: used, Supersonic sound-dampened – Diesel engine FPT (Iveco) N45TE1F (STAGE 3A) – Water-cooled – Electric starter with battery – Three-phase synchronous alternator – Three-phase power output 83 kVA (66.4 kW) The engine does not comply with current EU emission regulations for mobile applications; approved for STATIONARY OPERATION ONLY! • Electronic voltage regulator “AVR” with three-phase detection • Robust base frame capable of containing any potential leaks of fluids from the engine to prevent environmental contamination • Oil pump • Pre-fuel filter with water separator • Large access doors facilitate easy maintenance (replacement of air filters, oil, fuel) Itedpfo Aapnrjx Ag Aon • Central lifting eye • Side pockets for movement with forklifts • Control panel with digital control in automatic or manual version • Designed for a wide range of equipment • Supersonic sound-dampened • Complies with GE guidelines for noise and safety NOMINAL OUTPUT POWER • Three-phase power output Stand-by (LTP) 90 kVA (72 kW) / 400 V / 130 A • Three-phase power output PRP 83 kVA (66.4 kW) / 400 V / 120 A • Three-phase power output COP 66 kVA (52.8 kW) / 400 V / 95.3 A • Frequency 50 Hz Engine FPT (IVECO) N45TE1F, water-cooled, STAGE 3A, 80 kW (109 hp) Speed governor: Electronic Fuel: Diesel Fuel tank capacity: 230 L (optional: 350 L) Runtime (75% of PRP): 15.5 h General data Measured sound pressure level Lwa (sound pressure LpA): 92 dB(A) (67 dB(A) @7m) Guaranteed sound pressure level Lwa (sound pressure LpA): 94 dB(A) (69 dB(A) @7m) Weight (dry): 1630 kg Dimensions (L x H x W): 2630 x 1750 x 1130 mm Base model with terminal block connection for fixed installation (= without sockets, sockets available as an option) Base model without RCD/isolator (= only for building power supply, RCD/isolator available as an option)

Condition: used, H CLASS: 400V / 50 Hz Max. power kVA S1: 27 kVA / 21.6 kW Recommended tractor power for drawing max. power: 81 hp PTO speed: 430 rpm Voltmeter and frequency meter Brushless, AVR, cos 0.8 Protection class IP44 Sockets for field operation: 1x 63A-400V, 1x 32A-400V, 1x 16A-400V, 1x 230V-Schuko Sockets for mains connection: 1x 63A-400V, 1-hour plug Equipment: Insulation monitor for field operation, multifunction display (voltmeter + ammeter + frequency meter + operating hour counter) Shutdown in case of over/under voltage + over/under frequency, star point is ungrounded Equipment: 4-pole switch (field operation/mains connection), 4-pole thermal-magnetic circuit breaker for 400V sockets Single-phase thermal fuse for 230V socket Sockets: 1x 32A-400V, 1x CEE 32A-230V, 1x Schuko socket PTO shaft not included Itode Aapq Tspfx Ag Aen Application note for optional operation: mains/generator The local power grid and the generator must be safely and permanently galvanically separated from each other by a NETWORK-0-GENERATOR switch. Installation must only be carried out by a qualified electrician!

Condition: used, Gasoline engine HONDA - GX 390 - Three-phase synchronous AC generator - Recoil starter - Electronic voltage regulator (AVR) - FI circuit breaker Type B according to DGUV NOMINAL OUTPUT POWER     Power, three-phase, standby: 8 kVA (6.4 kW) / 400V / 11.5A     Power, three-phase, PRP: 7 kVA (5.6 kW) / 400V / 10.1A Itodo Aaqv Rspfx Ag Aen     Power, single-phase, PRP: 5 kVA / kW / 230V / 21.7A     Frequency: 50 Hz GENERAL DATA     Fuel tank capacity: 20 liters     Running time (75% of PRP): 8.5 hours     Measured sound power level Lwa (sound pressure LpA): 96 dB(A) (71 dB(A) @ 7m)     Guaranteed sound power level Lwa (sound pressure LpA): 96 dB(A) (71 dB(A) @ 7m)     Dry weight: 110 kg     Dimensions (LxWxH): 770x520x650 mm

Condition: used, Engine: FPT N45SM1F, 60 kW, STAGE 3A, diesel, water-cooled, electric starter with battery. The engine does not meet current EU emission standards for mobile use; APPROVED FOR STATIONARY OPERATION ONLY! Basic model with terminal block connection for fixed installation, WITHOUT SOCKETS / WITHOUT RCD/ISOLATOR. • Electronic voltage regulator “AVR” with three-phase detection • Rounded edges to allow rainwater to run off • Tight base, capable of collecting any leaks of liquids from the engine to prevent environmental pollution • External taps for draining oil and water • Large access doors enable easy maintenance (replacement of air filters, oil, fuel) • Central lifting eye • Side pockets for movement with forklifts • Control panel with digital control unit (manual / manual with sockets / automatic) • Complies with GE guidelines for noise and safety NOMINAL OUTPUT POWER * Three-phase power, Stand-by (LTP) 66 kVA (52.8 kW) / 400V / 95.3 A * Three-phase power, PRP 60 kVA (48 kW) / 400V / 86.7 A * Single-phase power, PRP 22 kVA / 230V / 95.6 A GENERAL DATA Fuel tank capacity 100 liters Running time (75% of PRP) 8 h Starter battery 12 Vdc - 80Ah / 670A CCA(EN) Protection class IP IP 44 * Measured sound power level Lwa (sound pressure LpA) 91.7 dB(A) (66.7 dB(A) @ 7m) * Guaranteed sound power level Lwa (sound pressure LpA) 93 dB(A) (68 dB(A) @ 7m) Performance class G2 FUEL CONSUMPTION 110% (Stand-by power) 18 l/h 100% of PRP 16.7 l/h 75% of PRP 12.3 l/h 50% of PRP 9.5 l/h Version with terminal block connection for fixed installation - WITHOUT SOCKETS! (Available as an option) Version for building or house power supply - WITHOUT RCD/ISOLATOR (Available as an option) Itjdpo Aag Upefx Ag Aen

Condition: used, Naked series – Portable – Yanmar diesel engine with reversible starter – Single-phase AC generator – Power, single-phase: 5 kVA (4.5 kW) Iodpfo Aamrhox Ag Astn VERSION WITHOUT RCD/ISO! SUITABLE FOR DOMESTIC USE ONLY! TECHNICAL DESCRIPTION - Power, single-phase, standby: 5.7 kVA (5.1 kW) - Power, single-phase, PRP: 5 kVA (4.5 kW) - Frequency: 50 Hz - Sockets: 1x 230V 32A 2P+T CEE – 1x 230V 16A 2P+T CEE - Circuit breaker - RCD (residual current device) (optional) GENERAL DATA - Fuel tank capacity: 5.5 l - Running time (75% of PRP): 5.5 h - Measured sound pressure level Lwa (sound pressure LpA): 99 dB(A) (74 dB(A) @7m) - Weight (dry): 93 kg - Dimensions (LxHxW): 770 x 650 x 520 mm

Condition: used, Diesel generator set FPT (IVECO) C13 TE3A / FPT (IVECO) C13 TE2F - Three-phase synchronous generator - Three-phase power output 410 kVA (328 kW) / 400 kVA (320 kW) – Water-cooled, WITHOUT residual current device/isolator (optional), terminal block connection (= without sockets, optional) The MOSA GE 455 FSX model is a super-silenced diesel generator set with common rail injection, electronic speed control, and a fuel tank capacity of 580 liters for 8.8 / 7.6 hours of continuous operation, weighing 4240 kg / 4100 kg. The machine is equipped with a roll-over protection structure, lifting hook, forklift entry, and fuel tank, and thanks to the enclosure, the noise level is minimized. The machine base is designed to contain any fluids present in the engine and fuel tank in the event of leaks, to prevent dispersion into the environment. The AVR ensures stable power for supplying sensitive electronic equipment, such as computers, power tools, etc. The built-in control panel can be secured with a padlock and contains the connections and controls of the machine, including a residual current circuit breaker, main circuit breaker, and engine protection. The generator set is designed for connection to the EAS automatic start switchboard to be used as an emergency generator in the event of a failure in the main power supply of the available power grid. A TCM remote control allows the engine to be started/stopped from a distance of up to 10 meters from the machine. Suitable for a wide range of applications such as industrial plants, residential areas, hospitals, events, large construction sites, noise-sensitive environments, and as an emergency power generator. In accordance with CE guidelines • Super-silenced • Electronic voltage regulation “AVR” • Large access doors facilitate easy maintenance (replacement of air filters, oil, fuel) • Control panel with digital control in automatic or manual version • Tight base that is able to collect any leakage of liquids from the engine to prevent environmental pollution • Two central lifting eyes • Oil pump • Pre-fuel filter with water separator • In accordance with GE guidelines for noise and safety • Terminal block connection (= without sockets, optional) • Without residual current device/isolator (= only suitable for building feed, residual current device/isolator optional) Nominal output power     Three-phase standby power: 275 kVA (220 kW) / 400 V / 397 A Itjdpfx Age Aap R Ho Asn     Three-phase PRP power: 250 kVA (200 kW) / 400 V / 361 A     Three-phase COP power: 208 kVA (166.4 kW) / 400 V / 300 A     Frequency: 50 Hz General data:     Fuel tank capacity: 425 liters     Running time (75% of PRP): 11 h     Measured sound pressure level LwA (sound pressure LpA): 95 dB(A) (70 dB(A) @ 7 m)     Guaranteed sound pressure level LwA (sound pressure LpA): 96 dB(A) (71 dB(A) @ 7 m)     Dry weight: 3500 kg     Dimensions (L x W x H): 3750 x 1400 x 1880 mm Engine:     Type: FPT NEF 67 TE8W, STAGE 0     Fuel: Diesel

Year of construction: 2021, condition: refurbished (used), Spindle motor, completely overhauled for JUNG HF50 / JF520. Electrically overhauled / new bearings installed and balanced. Itsdehcn Spepfx Ag Aen Exchange delivery possible, depending on availability.

Condition: new, Year of construction: 2026, Firebox output: 175 kW Iedpfx Aok Utrpjg Aetn Working output: 140 kW Exhaust duct diameter: 200 mm Warm air supply pipes: 3 x 250 mm Firebox length: 950 mm Firebox width: 600 mm Firebox height: 860 mm Air supply: 8900 m³/h Power consumption: 3500 W Designed for room volume: 3000 m³ Area to be heated: 500/600 m² Oven height without warm air supply pipes: 2200 mm Oven width: 930 mm Oven length without flue gas fan: 1700 mm Weight: 615 kg

Condition: new, Year of construction: 2026, Combustion chamber output: 510 kW Working output: 407 kW New, original packaging: Yes Iedpfx Ask Utrwjg Astn Smoke vent diameter: 250 mm Hot air supply ducts: 4 x 350 mm Combustion chamber length: 1900 mm Combustion chamber width: 900 mm Combustion chamber height: 900 mm Air supply: 26,000 m³/h Power consumption: 4500 W Designed for room volume: 8000 m³ Area to be heated: 1800 m² Oven height without hot air supply ducts: 3000 mm Oven width: 1220 mm Oven length without flue gas fan: 2700 mm Weight: 1575 kg

Condition: new, Year of construction: 2025, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. Itjdponq Aibefx Ag Aon An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: new, Year of construction: 2025, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can be amortized in the shortest possible time. Isdpfxenq Dkis Ag Aotn An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Year of construction: 2015, condition: refurbished (used), Laboratory gas generator with a capacity of 12.5 liters/min and a purity of 0.5% residual oxygen. The system was completely overhauled by us, the company Airtech Stickstoff GmbH, as an authorized partner of Parker. We can also take over the service for you. Itodpfx Aen R Nausg Ajn

Condition: used, 619569.0, 35-40 ADVANCED, MS Ultrasonic, ultrasonic generator Model: 619569.0 Type: 35-40 ADVANCED Condition: Used Iodpfxjt Txbdo Ag Ajtn

Condition: used, Year of construction: 2004, Technical details: rated capacity: 60 kVA control: Modulsteuerung type of fuel: Biogas weight of the machine ca.: 1,9 t dimensions L x W x H: 2,9 x 1,4 x 1,9 m output: 55 KW Functionality unknown. The generator is sold as a spare part donor at a very reasonable price! Ambient temperature 221°F / 105° C Itjdpfxsu Nvclo Ag Aen Operation via control panel on the control cabinet door. Base frame is a steel construction on which the generator is mounted. Hour counter digital Engine: -4-cylinder; Liebherr type G 924 TI, turbo with intercooling; speed 1,500 rpm. Generator: -VEM Motors; 400 V / 690 V, speed 1,555 rpm; power max. 75 hp / 55 kW. Gas mixer: -RMG Regel- Messtechnik GmbH; type RMG 983-100/50 *

Condition: used, Technical details: rated capacity: 8,1 kVA Number of working hours: 0 h output: max. 400 V = 8,1 kVA type of fuel: Diesel voltage: 400 V / 23 V V output: max. 8,1 kVA weight of the machine ca.: 0,165 t dimensions L x W x H: ca. 0,85 x 0,53 x 0,77 (o.Karton) m Itsdpsu Nvcxsfx Ag Aen transport dimensions LxWxH: 0,9 x 0,55 x 0,80 m Floor standing machine with 4x wheels, 2x steerable and braked power: at max. voltage = 400V - 8,1kVA and 230V - 7,3 kVA at nominal voltage = 440V - 7,5 kVA and 230V - 6,7 kVA current 400V - 16A and 230V - 32A Voltage 400V / 230V Diesel engine: 498 cc displacement Tank capacity 15 liters Battery 12V voltage with power 36 Ah Equipment: 3x connection socket ( 1x 400V / 16A and 1x 230V / 32A both three-pole and 1x Schuko socket 230V / 16A) Accessories see photo Offers only to the professional user. *

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, Iedpfeu Nxatex Ag Aotn intermediate storage tank + fuel depot tanks 4,8 m³ *

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. Itedpou Nzwujfx Ag Aon In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *