Used Prima Power Platino 1530 (2017) for sale (39,748)

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 6SL3995-6AX00-0BA0, overall weight: 6 kg, total length: 500 mm, total width: 300 mm, total height: 50 mm, Units are disassembled from a cabinet that has never been used 4 units available Dodpovmgz Ajfx Agmsck

Condition: excellent (used), Year of construction: 2001, operating hours: 8,481 h, power: 114 kW (155.00 HP), motor manufacturer: Perkins, fuel type: diesel, first registration: 05/2001, color: other, Equipment: air conditioning, = Additional options and accessories = - 1 fuel tank - ABS Dcsdpfxezph R Ts Agmsk - Armrest - Hub Reduction - Hydraulics - PTO - Sper - Thick Axles = More information = General information Cab: day Technical information Torque: 663 Nm Number of cylinders: 6 Engine capacity: 5.998 cc Drivetrain Drive: Wheel Engine type: Perkins 1006-60TWG Transmission Transmission: 32 gears Axle configuration Tyre profile: 70% Brakes: disc brakes Front axle: Differential lock; Steering; Reduction: hub reduction Rear axle: Double wheels; Differential lock; Reduction: hub reduction Weights Empty weight: 6.700 kg Carrying capacity: 3.800 kg GVW: 10.500 kg Functional Quick coupler system: Yes Condition Technical condition: very good Visual appearance: very good

Condition: excellent (used), Year of construction: 2007, operating hours: 36,514 h, functionality: fully functional, type of input current: AC, power: 300 kW (407.89 HP), fuel: domestic gas H, type of cooling: water, Equipment: documentation/manual, CHP plant, combined heat and power plant AVESCO CAT TBG-926-24SY with heat pump After the new gas heating system is commissioned in our heating plant in September 2025, the CHP plant will be available. The plant has been regularly and professionally maintained. With 36,514 operating hours, it is in very good condition. The plant can supply 70 apartments with heat and electricity. In March 2026, an emissions test was carried out; see the measurement report. If desired, an on-site inspection can be arranged. The dismantling and transport must be taken over by the buyer. The cost estimate prepared by us amounts to approximately 40,000 euros. The location is in CH-8620 Wetzikon ZH. Dcsdpszq S Tnsfx Agmok

Condition: used, Year of construction: 2017, operating hours: 5,145 h, Equipment: all wheel drive, CAT 906M wheel loader, manufactured in 2017, with bucket & forks! ----* Manufacturer: CAT * Type: 906M * Year of manufacture: 2017 Dcedpfxezp Ayio Agmok * Recorded operating hours: approx. 5,145 * Includes bucket & forks * German machine, first owner * Hydraulic quick coupler * CE declaration & data confirmation available * More photos + video upon request (WhatsApp Erik) * Price: EUR 26,900, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp *All information without guarantee, errors and prior sale excepted.*

Condition: used, mileage: 190,550 km, power: 220 kW (299.12 HP), first registration: 06/2021, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 13 m³, loading space length: 7,200 mm, loading space width: 2,490 mm, loading space height: 750 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ATEGO 1530 L, flatbed truck, 7.20 m open, with ZAA tow hitch * Ideal for steel transport with numerous securing options * Permissible total weight 16,000 kg = payload approx. 9,000 kg * Vehicle No. for customer inquiries: 4780 * Active Brake Assist * Differential lock, rear axle * Air conditioning * Engine version Euro VI, D * Lane keeping assist * Environmental badge (green) * Trailer coupling G 145, for ZAA * Trailer coupling Ringfeder * High Performance Engine Brake * Air suspension, rear axle * Rain/light sensor * Serviced according to maintenance schedule * Stability control assistant (ESP) * Auxiliary heater, hot air, 2000 W * Trailer brake, 2-line * Trailer socket 24 V, 15-pin * Electronic braking system with ABS and ASR * Driver's suspension seat, comfort * Power windows, electric, on both sides * Gearbox G 140-8/9.30-0.79 * Mercedes PowerShift 3 * Exterior sun visor, transparent * Cruise control * Two-seater * Second plastic tank 2 x 100 l, left * Storage compartment, high, on engine tunnel * AdBlue tank 25 l * Roof hatch/vent flap, roof * Weight variant 16.0 t (6.1/10.5) * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit * Plastic tank 180 l, left * Engine OM936, R6, 7.7 l, 220 kW (299 hp), 1200 Nm * Cross member, for subsequent installation of tow hitch G145 ZAA * Wheelbase 4760 mm * Tires tubeless, 305/70 R 19.5 front axle * Inline engine, 6 cylinders * Reversing warning * S-cab ClassicSpace, 2.30 m, tunnel * Stabilizer, under frame, rear axle * Front spring, 6.1 t, parabolic * Preparation for toll collection * Tachograph digital, 2nd generation, ADR * 2/3-door No liability for printing and typographical errors Dcedpjzq Ikpefx Agmek Sales only to commercial customers Errors and prior sales reserved* Changes, prior sales, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense of purchase. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING, FINANCING, and HIRE PURCHASE offer Warranty insurance possible upon request with the insurance company * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our partners on site * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: used, mileage: 34,000 km, power: 220 kW (299.12 HP), first registration: 08/2023, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MB ATEGO 1530 TT-XL Horse Truck, 5 Horses, Pop-Out ///EXCELLENT CONDITION, LIKE NEW/// 5 horses, tack room, side and rear ramp, pop-out extension, cellar under living area, storage compartments around the truck, 550 liters fresh water, 300 liters wastewater, Dsdpfx Agozp A Aksmsck 5 sleeping berths, living room, large bed above the bathroom, care bed, rear entrance door, Video surveillance and temperature monitoring for the horse compartment, LG air conditioning and auxiliary heating, TV/satellite, fine wood trim, Bathroom, shower, toilet, air conditioning, kitchen, leather seating area, microwave, refrigerator, exterior tack room, winch, cruise control, alloy wheels, navigation system, air suspension, trailer hitch, and more. Errors/input errors and prior sale are subject to change. * NET PRICE SALE POSSIBLE. * Top leasing offers. Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands in the field of horse transporters and trailers. Please arrange an appointment in advance. Contact: Richard Theurer, Andreas Theurer

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 Dcjdezqgllepfx Agmok - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition

Condition: used, axle configuration: 3 axles, first registration: 07/2018, color: other, Year of construction: 2018, Empty weight: 5.290 kg Axle 1: left 6 mm right 6 mm Axle 2: left 6 mm right 6 mm Dcsdpfezpaklex Agmjk Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Dcjdpfx Aozrgfhjgmjk Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Dcodeif Az Uopfx Agmjk Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: good (used), Year of construction: 2017, operating hours: 1,480 h, load capacity: 2,200 kg, fuel type: electric, empty load weight: 550 kg, mileage: 1,480 km, This electric pallet truck, manufactured by Hyster, is from 2017. It has a lifting capacity of 2,200 kg and is equipped with an external battery charger. It has only 1,480 operating hours. It is suitable for use with Euro pallets. Watch the video on YouTube. Dcedpfx Aoxg R Ebogmok

Condition: used, Year of construction: 2017, operating hours: 7,963 h, * Swivel bucket Dodpfx Aozpg Eisgmock * OQ 70/55 * Grading blade * Rearview camera * Weight: 19,630 kg * Power: 128.4 kW -----Internal vehicle number: 12321 Errors and prior sale excepted.

Condition: used, HERION hydraulic power unit with hydraulic pump Hydraulic power unit Unit No.: 6352160 Year of manufacture: 1976 Dcedpsxf Uzqjfx Agmsk Operating pressure: 115 bar Flow rate: 4.5 litres/min. Hydraulic pressure (pump): max. 160 bar Motor power: 1.5 kW Tank capacity: 40 litres - 1 return filter - 1 pressure gauge 250 bar - 1 4/3-way valve HERION, type S10 B51 G013611 (24 Volt DC, 35 Watt) Space requirement (L x W x H): 600 x 400 x 600 mm Weight: 70 kg Very good condition Sold without oil

Condition: not inspected (used), 5 balers package: 2 x Orwak 3810, 3 x Orwak 3820 POWER. Conditions as they are- not us!!! Djdpjzquqvefx Agmock

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine Dedpjgu Nmhjfx Agmock

Year of construction: 2025, condition: used, New: Yes Empty weight: 2.250 kg Dimensions of cargo space: 245 x 140 x 200 cm CE mark: yes Serial number: 2002005 Dcedpfxjxuzups Agmsk Please contact Team DPX for more information

Year of construction: 2026, condition: used, New: Yes Empty weight: 690 kg Dimensions of cargo space: 194 x 145 x 144 cm Dcjdpfx Ajxuzucsgmek CE mark: yes Please contact Team DPX for more information

Year of construction: 2025, condition: used, New: Yes Empty weight: 35 kg Dimensions of cargo space: 54 x 29 x 58 cm CE mark: yes Serial number: 25050168 Dedpfexdhfgox Agmeck Please contact Team DPX for more information

Year of construction: 2026, condition: used, New: Yes Empty weight: 400 kg Dimensions of cargo space: 150 x 130 x 107 cm CE mark: yes Please contact Team DPX for more information AC400V-200kW Automatic Load Bank Rated Voltage: 3P4W AC400V 50/60 Hz Dedjznr Dbepfx Agmjck Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz Power Supply: 3P5W AC400V 50 Hz Rated Power: 200 kW at 400V Duty Cycle: Continuois Cooling Type: Forced Air Cooling (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.) Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW Wire Connection: - Load bank input— busbar (star coupling “Y”) - Control power input—terminal block Communication Interface: RS232/RS485

Condition: used, Rollers: 3 Dcodpfx Agezqyypjmsk Speed: Speed settings: stepless

Year of construction: 2014, operating hours: 59,436 h, condition: ready for operation (used), functionality: fully functional, Buderus Loganova EN20 CHP unit – 19 kW electrical / 38 kW thermal – Year of manufacture 2014 For sale is a combined heat and power (CHP) unit from the manufacturer Buderus, type Loganova EN20, from a commercial property in Stuttgart. The unit will be decommissioned as part of an upgrade to the energy supply. Technical data: * Manufacturer: Buderus * Type: Loganova EN20 * Year of manufacture: 2014 * Electrical output: 19 kW * Thermal output: 38 kW * Operating hours: 59,436 h Dcjdpfxezd Uhhj Agmok * Start cycles: 6,031 * Maintenance: Premium maintenance contract since commissioning Condition of the unit: The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. According to initial assessment, the heating water pump is defective. The CHP unit is currently out of service. Location & Availability: Location: 70567 Stuttgart Planned decommissioning / dismantling: June–July 2026 Note: Regularly maintained unit with documented service history. Sale due to a unit upgrade. Inspection possible by appointment. If you are interested, we will gladly send you further information and photos.

Condition: new, Year of construction: 2023, functionality: unexamined, Müteck wood shredder MRZ1530 with 55 kW motor. Brand new, unused Djdpoyt Rriefx Agmsck Only the shredder is for sale.

Year of construction: 2025, condition: used, New: Yes Empty weight: 10.000 kg Dimensions of cargo space: 400 x 210 x 210 cm Serial number: 2411167 Please contact Team DPX for more information AC400V-2000kW Automatic Load Bank Rated Voltage: 3P4W 400VAC 50/60Hz Power Supply: External 3P5W 400VAC 50 Hz Dedpjzng Uuefx Agmsck Rated Power: 2.000 kW Duty Cycle: Continuous Cooling type: Forced Air Cooling (Horizontal inlet air and upwards exhaust cooling) Load Steps @400V: 1, 2, 2, 5, 10, 10, 20, 50, 100, 200, 200, 200, 200, 200, 200, 200, 200, 200kW, total 2000kW Note: when voltage is less than 400V, power will derate according to Ohm’s Law. Wire Connection: - Load bank input—busbar - Control power input—terminal block Communication Interface: RS232/RS485 - Control part IP54

Year of construction: 2014, condition: good (used), functionality: unexamined, Description For sale is an industrial DC power supply / direct current power supply, Thumm SNT 20, from a decommissioned system. The unit is designed for high direct currents and is suitable for various industrial applications, testing systems, special machine construction, electroplating, coating, or process systems. Dcedpfxezap T Sj Agmek Technical data according to the nameplate: Manufacturer: Thumm Type: SNT 20 Device type: DC power supply / direct current power supply Power: 30 kW Mains input: 3AC 400 V / PE, 50/60 Hz Output voltage: 1DC 0–30 V Output current: 1DC 0–500 A Regulation: Constant current / constant voltage Setpoint input: 0–10 V = 0–100 % for current and voltage Cooling: controlled fan Device protection: short-circuit proof, overload protection, thermal protection, mains monitoring Duty cycle: ED 70 % Year of manufacture: 05/2014 Weight: approx. 100 kg Device No.: 21401682 / 9-24 Condition The unit comes from a decommissioned industrial system. It is sold in its removed condition. We have not performed a functional test. See pictures for the visual condition. Inspection possible by appointment. Scope of supply The DC power supply / module shown in the pictures is for sale. Other identical or similar modules may be available upon request. Price A package price is possible when purchasing multiple units. Notes Sale exclusively to commercial customers. Subject to prior sale and errors. Sale is made without warranty, guarantee, or right of return.

Condition: used, mileage: 511,877 km, power: 300 kW (407.89 HP), first registration: 06/2017, fuel type: diesel, empty load weight: 7,850 kg, maximum load weight: 6,150 kg, overall weight: 32,000 kg, tire size: 285 / 70 R 19.5 / 8mm, axle configuration: 4x2, next inspection (TÜV): 09/2024, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total width: 25,500 mm, front tire size: 285 / 70 R 19.5 / 8mm, operation weight: 14,000 kg, Equipment: air conditioning,