Used Rapid 650-M for sale (72,845)

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Equipment and technical data: - For classic nesting machining with a spoilboard - Machine frame of welded construction with ground and hardened prismatic guides for the moving column, aggregate head and consoles - Moving column in gantry design - Rack-and-pinion drive, helically toothed, in the X and Y directions, ball screws in the Z direction for precise positioning - Machining dimensions: - Max. support surface on nesting table: X = 3100 mm Y = 1560 mm - Max. travel: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height DYNESTIC table Z = 100 mm from top of table (without spoilboard) - Maximum programmable speed vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid layout - continuous grooves in the X and Y directions - groove spacing 50 mm - with 25 metres of sealing cord for clamping the spoilboard - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - drive power: 1.7 kW - 13 vertical spindles: - individually selectable - U-shaped arrangement - 5+4 in the X and 4 in the Y direction Iijdpszlbrpefx An Hef - 32 mm grid - max. drill diameter: 35 mm - total drill length: 70 mm from screw-on end (depending on panel thickness) - spindle extension stroke: 70 mm - direction of rotation: clockwise / counter-clockwise alternating - n(max): 1000 - 4400 rpm infinitely variable - fitting: M 10 thread - fit 11 mm - without tool, without holder - 6 horizontal spindles: - 2 double drilling spindles in the X direction - 1 double drilling spindle in the Y direction - fitting: M 10 thread, fit 11 mm - total drill length max. 63 mm from screw-on end - without tool, without holder - Milling unit 7842: - power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm infinitely variable - max. power at 12000 rpm to 24000 rpm - air-cooled - with HSK-F 63 tool holder - with right-hand thread nut (for right-rotating tools) - with collet chuck with HSK shank - ceramic ball bearings (hybrid bearings) - tool weight max. 6 kg (incl. holder) - tools: milling and grinding tools max. Ø 160 mm - Safety guarding in accordance with CE standard - Protective fence at the sides and rear - Vacuum pump: 500 m³/h, dry-running - Personal safety via light barriers in the front area of the machine - Hand-held control unit for remote control of the machine with the following operating functions: - start / stop of the machining program - speed control of the machining cycles - reset button - manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine licence consisting of: - CAMPUS NC-HOPS: - graphical variant system with WOP and CAD/CAM properties for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined lubrication intervals - Additional sealing against dust through overpressure in every guide carriage - Simultaneous lubrication: - for all linear guides in the X, Y and Z directions - for all ball screws in the Y and Z directions - for all milling spindle guides - for tool changer guides (except pick-up tool changer) - All console guides are not lubricat...

Condition: like new (used), functionality: not functional, load capacity: 6,500 kg, Load capacity 6500 kg Please note: Arm diameter adjustable from 1880 mm to 4550 mm (swivel-out) Space-saving and continuously adjustable, the extension arms can be locked in place Speed continuously adjustable from 0.001 to 5 rpm Motor power 3 kW Torque 15000 Nm Height 800 mm Maximum current transmission 2000 A Weight 4700 kg Ijdox Thucjpfx An Hoif with hand and double-foot remote control CE certificate, declaration of conformity, documentation, circuit diagram with original 2016 quotation invoice Current new price approx. €28,000

Condition: as good as new (ex-display), Year of construction: 2024, Semi-Automatic Universal Screen Printing Machine SFM 650 DHE Flat printing machine with parallel liftin gupper frame, printing size: 400x600mm, with motor squeegee motion and height-adjustable feeding table incl. x/y-adjustment, adjustable slot stone printing bed 650x950mm. Height adjustment of the feeding table: approx. 300mm, max. height of the printing object: approx. 450mm. Machine with base frame and safety bar sideways, required compressed air: 6bar, supply voltage: 230V, 50Hz. Electro-pneumatic machine, micro-processor control. Screen printing machine for flat printing, with slot stone printing bed (option: vacuum printing bed with vacuum pump), printing movements during set-up operation separately adjustable, squeegee stroke, squeegee pressure and floodbar infinitely adjustable. Delivery time 2-3 weeks Isdsc Nf Huopfx An Hsif

Condition: new, Year of construction: 2026, Extraction capacity approx. 6500 m3/h Motor power 5.5 kW Speed ​​3000 rpm Rated voltage 400 V, 50 Hz Extraction nozzle 280/200 mm Extraction speed 28 m/sec. Number of filters 37 Negative pressure 3000Pa Filter category G Iiedpfx Asv Dtl Ajn Hjf Polyester filter material Noise level 80 dB without connection / 65 dB when connected to the machine via the pipe Filter area 17.1 m2 Dimensions (L x W x H) 2080 x 920 x 2100 mm Weight 248 kg

Condition: new, Year of construction: 2025, Do you need an efficient and proven bending machine that you will use for years? Look what our satisfied customers write on the website! Prod Masz is a guarantee of reliability. Click and check our online offer Triple segmented bender SGR-650/1.0mm Technical specifications: - maximum working width; 650mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 60kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale Iiedpfxsh Atafs An Hsf - passage 50mm Total length: 1m Height: 45cm Price: 1,900 euros Delivery date: every week Cash on delivery and bank transfer in advance Delivery costs PLEASE ASK We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Manufacturer: Rapid Model: 2645-KU 3 rotor knives 2 stator knives Power: 12 kW Slow-speed mill with soundproof enclosures Isdpswg R S Rjfx An Hoif PRICE REDUCTION FROM 4,250 TO 3,750 EUR!!!

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 20000-650-500 RA1407 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 20.000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Iedpfx Aey Rbg Hen Hsif support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1990, Technical details: total power requirement: 1,5 kw weight of the machine approx.: 110 kg electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Iisdpsu Nv Dpofx An Hof Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch *

Condition: ready for operation (used), Year of construction: 2000, operating hours: 32,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, overall weight: 4,900 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2000. It features a travel range of 1000 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a vertical tool changer with 24 stations and a maximum permissible load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 103 V vertical machining centre we have for sale. Contact us for further details. Iodpfx Aezu Nygjn Hsif - Rapid Traverse (X/Y/Z): 30 m/min- Max. Permissible Load: 800 kg- Tool Changer: Vertical tool changer with 24 stations- Machine Weight: approx. 4,900 kg- Main Drive: Speed-controlled asynchronous motor 9/13 kW- Electrical Specifications: 400 V, 3+PE~, 50/60 Hz, 50 A, 30 kVA, Control voltage 230 V / 24 V=- Operating Hours: approx. 32,000 operational hours (cabinet counter reads 054888 h)- Included / Additional Equipment: Chip conveyor, dividing head with counterholder (4th axis, currently disconnected)- Operational Condition: Configured for 4 axes; 4th axis power unit failed/disconnected; operated as 3-axis machine until end of 2021; out of service and available immediately

Condition: used, Year of construction: 2001, Transnorm spiral helix belt curve conveyor right 90°-750-650 IR1200 RA2437 Technical data: Frame width (NB): 750 mm Iedpfx Asx Sz Iyjn Hjif belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,35-1,21 Drive: SEW gear motor with movi-mot frequency converter for stepless speedcontroll Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2022, functionality: fully functional, Kunzmann WF 410M tool milling machine with Heidenhain TNC 128 control. Brand new and CE-compliant! Technical specifications: >> Year of manufacture 2022 Machine no. 411555 >> Milling table clamping area 650 x 375 mm Clamping slots 5 Slot width 14 H 7 Slot spacing 63 mm Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed X, Y, Z axes (infinitely variable) up to max. 5/5/4 m/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Connected load 13 kVA Accessories and equipment: Iiedpfov Rppkox An Hof >> Heidenhain TNC 128 control >> Heidenhain HR electronic handwheel 510FS >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Machine light >> Minimum quantity lubrication >> Counterholder >> Digital display for spindle stroke >> Oriented spindle stop (tapping without compensating chuck) >> Chip protection cabin >> KT 130 edge finder >> Coolant system >> 200 mm rotary table >> Dividing head with 125 mm three- and four-jaw chuck >> 125 mm hydraulic vise About the machine: Offered is a Kunzmann WF 410M tool milling machine, built in 2022, in new condition with a Heidenhain TNC 128 control. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for fast and easy data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole pattern, rectangular pockets, rectangular tenons, and multi-pass milling of surfaces. A very easy-to-use control system. The machine also has hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on site with power on.

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition Iodjphvl Tjpfx An Hoif The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, MACHINE BUILT 2009 / COMPLETELY REFURBISHED 2025 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Type - MKW RAPID UT - System Belt conveyor table 32- Number of stations B3 - Format 35 x 50 cm GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 32stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated ASS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 (incl. automatic station-control in case of operating error) 1 Prepiling-System for all stations Type MKW VS 3 - Mobile stacking pallets - Format up to 35 x 50 cm - 30 units fixed installation in front of the machine - 2 mobile stations in front of the collator (15+2+15) - 2 mobile pallets per station inclusive Iiedpjxdy R Iofx An Hof 1 High-Pile Non-Stop Delivery Unit Type MKW RAPID TD-3 - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Stacking function adjustable: straight stacking or offset function - Automatic delivery onto buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: used, Cast iron bed Length: 3650 mm Width: 1370 mm Thickness: 150 mm 11 T-slots - dimensions 32 x 18 mm Slots spacing: 125 mm Assembly in 2 parts Dimensions of each part: L 1820 mm x W 1370 mm x H 150 mm Total height on base 875 mm Weight: approx 4 T Iisdpfezmxq Sjx An Hjf

Condition: ready for operation (used), Year of construction: 2005, Make: KUNZMANN Type of machine: WF 650 Year of manufacture: 2005 Control system: HEIDENHAIN iTNC 530 Machine's weight: 4.000 kg Tool holder: SK40 x-travel: 650 mm y-travel: 500 mm z-travel: 450 mm Isdpfezawibex An Hoif Speed range: 10.000 U/min max. Table load: 350 kg Overall dimensions: 3,0 x 2,5 x 2,6 m Table dimensions: 900 x 500 mm

Year of construction: 1980, condition: good (used), strip width: max. 1.650 strip thickness: max. 3 mm blade shaft Ø: 165 mm Iijdpfx Aogrylmjn Hof speed: max. 150 m/min

Year of construction: 1980, condition: good (used), strip width: max. 1.650 strip thickness: max. 3 mm blade shaft Ø: 165 mm speed: max. 150 m/min Iedpogrylqsfx An Heif

Year of construction: 2024, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker G1650 Root Rake / incl. grab arms / incl. Volvo S70 adapter plate / in stock & immediately available / year of manufacture: 2024 / DEMO unit / very good condition Iijdpeykhvtofx An Hef Price: €20,890.00 net / €24,859.10 gross - Working width (mm): 1,650 - Own weight (kg): 1,610 - Recommended oil flow (l/min): 50 – 90 - Recommended operating pressure (bar): 200 – 250 - Carrier vehicle service weight (t): 20 – 25 Equipment: - Including grab arms - Including S70 adapter plate We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. Our warehouse stocks a very large selection of various Westtech products, all available for immediate delivery! Mr. Herden (phone) will be happy to help you. Upon request, we can also provide you with a financing offer. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni (telehandlers), JCB Construction Equipment, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Errors and interim sale excepted. Internal no.: 523060 = More information = New: No Application: Construction Please contact Marius Herden for more information.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, load capacity: 1,500 kg, The Siegmund M positioner is ideal for welding, assembly and maintenance work. Positioning is carried out using a manually driven handwheel. Positioner with load capacities of up to 1,500 kg. Torque 900 Nm Handwheel with handle Ø 315 mm U-angle compatibility System 28 Isdpfxevlgzae An Hjif Max. length of U-angle 3,000 mm A - Working height 850 mm B - Column height 955 mm C - Total height 1,140 mm D - Width of base plate 600 mm E - Length of base plate 600 mm Price does not include 3D accessories. Prices 3-D accessories, heavy cast parts, wall thickness 28mm, everything processed, special prices New: original angle 28 U-shape 500mm x 200mm x 200mm (surcharge 500.-€) or 2000mm x 200mm x 200mm (surcharge approx. 1000.-€) or 2400mm x 200mm x 200mm (surcharge 1300.-€) or with table top 28 hole, 2000mm x 1000mm x 200mm (surcharge 2000.-€) several positioners are available

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A - Level monitoring for component A + B Iiodpfszgck Nox An Hof - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria.

Condition: used, machine/vehicle number: 008516, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Iijdpjzbrn Ijfx An Hef Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives Iedpow Nklhjfx An Hsif - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: good (used), Year of construction: 2025, Universal machining center Machine type: DMG Mori DMX 60 U Control: Siemens Sinumerik One mit Celos X Year: 2025 SPECIFICATIONS X-Axis: 600 mm Y-Axis: 600 mm Z-Axis: 510 mm B-Axes: -15°/+110° C-Axis: 360° Rapid motion: (X/Y/Z): 42 m/min. Spindle speeds: 20 -15.000 rpm Spindle power: 20 / 14,5 kW Torque: 121 Nm Tool: SK 40 Tool capacity: 60 NC-panning and rotary Table Table size: 630 x 500 mm Equipment Chip conveyor Production Package Internal cooling: 40 bar Cooling tank: 600 l Iiodpfjzu R D Tox An Hjf paper band filter Electronical handwheel Direct linear scales Preparation for Hydraulic and Pneumatic Connections Air blow Oil mist separator Caliper: Renishaw PP40 3D-Touch probe: 3d quickSET Working mode: 4

Year of construction: 2021, condition: used, Multi-blade saw CAN CUT MC 930 Year of manufacture: 2021 Technical specifications Cutting width: 1,100 mm Max. cutting height: 50 mm Min. workpiece length: 650 mm Feed rate: 5-20 m/min Feed motor: 0.75 kW, 1,410 rpm Max. power consumption: 22 kW, 380 V Motor power: 30 hp Max. saw blade diameter: 250 mm Saw arbor diameter: 70 mm Saw blade speed: 3,500 rpm Max. number of saw blades: 15 pieces Working height: 900 mm Iedpfozu St Aex An Hjif Sound pressure level: 80 dB Automatic transport rollers: 3 pieces Rubber rollers between the saw blades to reduce vibrations when cutting MDF boards and wood.

Condition: used, Year of construction: 2018, Technical details: Isdpezu R Ilsfx An Hjif x-travel: 670 mm y-travel: 820 mm z-travel: 600 mm control: HEIDENHAIN iTNC 530 table surface area: D= 800 mm KESSLER mm tool taper: HSK 63 Tool changer: 96 pos. table load capacity: 1200 kg turning speeds: 18.000 1/min rapid traverse: 60 m/min total connected load: 90 kVA weight of the machine ca.: 20 t dimensions of the machine ca.: 5 x 2,5 x 3,3 m 5-axis simultaneous machining center, table swivelling (A-axis) + / - 120°, rotary table (C-axis) axis 360 °, internal coolant supply 20 bar, 600 l with paper filter, chipconveyor, 3D infrared touchprobe, laser tool setting BLUM, el. handwheel Heidenhain, chiller for spindle, automatic roof, 5-Achsen Simultan Bearbeitungszentrum, 3x hydr. connection in table-center, 1x pneum. connection in table-center, interface for POS-Robo, POS DCM collision module, POS kinematic module, airblast through spindle, network and USB connection, rotoclear, direct measuring system, approx. 29.500 h "machine on" , approx. 10.000 h "spindle on" *