Used Reducer Disc for sale (10,309)

Year of construction: 2024, condition: new, functionality: fully functional, Length: 3635 mm Hsdewh Ndbopfx Aqgefn Screw diameter: 330 mm Flow rate: approx. 10-15 m³/h Including speed monitor and safety switch Paint finish: RAL 7047 Telegrey EXW Türkiye

Year of construction: 2025, condition: like new (used), Medium screening 0-20/25 mm The installed screening shaft with a disc spacing of 15 mm is the most popular and frequently purchased screening line. Suitable for screening topsoil/humus, with smaller stones of -20/25 mm included in the fraction. The stones maintain soil permeability and stability, reducing moss formation. Mixing in compost, sand, or substrate turns dirt into new revenue. Disc spacing 15 mm – in a single operation with screening – works excellently with a Terra-Star. Screen fraction: 0-20/25 mm Hedpfx Ajyfwbzjqgsfn Wheel loader mounting is installed but not included in the price. On request, we supply the separator with adapters for excavators and wheel loaders. For excavators from 4t For wheel loaders from 3t No leakage oil connection necessary Series: TSE.083.210

Year of construction: 2018, condition: used, The separator is from a well-known customer who has vacated the storage area where it was previously in use. With the installed screening discs, you achieve a grain size of 0-45/50 mm. Mixing in of additives is also possible in the same operation. Hedpfx Aqjyf A Erjgefn The separator breaks up clods of soil and separates stones, roots, and branches from the reusable soil. When used as a feeder for a screening plant, performance increases by approximately 30% and waste/screen overflow is reduced by 60%, as the clods are already broken up. Other shafts can also be installed in the separator at any time. Conversion time: 40-60 min (patented shaft coupling) New prices: Mixing shafts M80X, grain size 0-60/80 mm: €10,567 Mixing shafts with block disc BS252, grain size 0-45/60 mm: €14,066 Used units, if available, correspondingly cheaper. An overflow plate is installed to prevent soil from spilling onto the wheel loader and to increase capacity by about 1/3. Included in the price is also the adapter for Volvo L50-120 type wheel loaders. Further technical information can be found in the datasheet in the images or on our website. For wheel loaders from 15 t Weight (kg): 3450 Drain line required: 1 Series: TSP.263.001

Condition: used, Discharge take-off table: - total length 7850 mm - total width 1200 mm - four upper hold-downs Hfjdpfxjxuiq Ee Aqgjn - prism guide 70 mm - hydraulic feed

Condition: good (used), Year of construction: 1994, functionality: fully functional, Manufacturer: S.P.A Magic M.P. Model: MGL2D This blow molding machine is fully functional. It is still in production and can be inspected by appointment. Hjdpfxsxxp Tbo Aqgofn Videos can be provided upon request. PRICE REDUCTION!!! From 21,000 to 19,000 EUR!

Condition: used, Conveyor belt with discharge Conveyor belt with pusher to the left Belt length 6200 mm plus 200 mm infeed rollers Belt width 335 mm Working height 980 mm Belt drive SEW 0.55 kW / 243 rpm Infeed rollers SEW 0.55 kW / 329 rpm Conveyor belt with discharge Reinhardt ATS Hfsdpjzhif Aefx Aqgen Conveyor belt with ejection Conveyor belt with left push Belt length 6200 mm plus 200 mm feed rollers Belt width 335 mm Working height 980 mm Belt drive SEW 0.55 kW / 243 rpm Feed rollers SEW 0.55 kW / 329 rpm Price: 1. In its current condition, without working electrical controls: 2,700 EUR Optional: Working electrical control + 1,400 EUR

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: MB 0484 / 2014, type of input current: three-phase, continuous power (apparent): 10 kVA, type of cooling: air, total width: 1,119 mm, total length: 2,595 mm, total height: 2,510 mm, overall weight: 1,700 kg, For sale is a capacitor discharge welding system (CD welding system) from the brand GLAMATRONIC, model GKS-S4/12-Q, manufactured in 2015. The system is in good condition and is suitable for industrial welding applications with high process reliability and precise energy output. The system has been regularly maintained and is immediately ready for operation. The control cabinets are equipped with additional air cooling. Technical data: Make / Type: GKS-S4/12-Q Year of manufacture: 06/2015 Rated voltage: 3 x 400 V AC / 50 Hz Control voltages: 230 V AC / 24 V DC Rated power: 10 kVA Hjdpjy Rmk Djfx Aqgsfn Welding energy: 4 kJ Welding force: 12 kN Max. supply line fuse: 32 A Frame weight: approx. 1,700 kg Control cabinet weight: approx. 1,000 kg

Condition: new, mileage: 1 km, power: 330 kW (448.67 HP), fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, - 2 fuel tanks - Adjustable seats - Air seats - Autoradio - CD Hfodpey Rt N Tsfx Aqgen - Drive mode select - Front seats manual adjustment - Full-size spare wheel - Keyless entry system - Multifunction steering wheel - Power windows front - PTO - Spare wheel - Spare wheel holder - Sun visor - Tachometer - Tool box - Transportation - Twin wheels - Xenon headlights Built for Long-Distance Transport Where Reliability Matters Modern transport companies demand more than horsepower alone. Whether hauling fuel tankers, bulk trailers, container chassis, chemical tankers or general freight, fleet owners need equipment that delivers maximum uptime, fuel efficiency and dependable performance every day. The Mercedes-Benz Actros 2045 S 4x2 has been engineered to meet these expectations. Combining the proven Mercedes-Benz OM460 engine with Mercedes PowerShift 3 transmission, a robust 4x2 driveline and the renowned Grounder specification, this tractor offers the perfect balance between performance, operating efficiency and long-term reliability. Designed for regional distribution, international transport and demanding export markets, the Actros 2045 S is ready to support businesses where every kilometre matters. Powered by the Proven Mercedes-Benz OM460 Engine At the heart of the Actros 2045 S sits one of Mercedes-Benz's most respected heavy-duty diesel engines. The OM460 is a 12.8-litre inline six-cylinder engine producing 330 kW (449 HP) and 2,200 Nm of torque, providing smooth power delivery and excellent fuel efficiency while maintaining the durability expected from Mercedes-Benz. Its proven EURO III configuration remains highly popular throughout international export markets thanks to its straightforward maintenance, worldwide parts availability and long service life. Engine Specifications: - Mercedes-Benz OM460 - 12.8-Litre Inline 6 Diesel - EURO III Emission Standard - 330 kW (449 HP) 2,200 Nm Torque - Reinforced Engine Mounts - Standard Exhaust Brake - Two-Cylinder Air Compressor - Cooling Package for Very Hot Regions Mercedes PowerShift 3 with PowerShift Advanced Efficient transport depends on smooth and intelligent power delivery. The Actros 2045 S is equipped with the Mercedes-Benz G230-12 automated gearbox, combined with Mercedes PowerShift 3 and PowerShift Advanced. Fast gear changes, Economy and Power driving modes and intelligent shift logic help reduce driver fatigue while improving fuel economy and maintaining excellent driving comfort during regional and international transport operations. Transmission Highlights: - Mercedes PowerShift 3 - PowerShift Advanced - 12-Speed Automated Transmission - Economy & Power Driving Modes - Single Disc Clutch - Transmission Oil Cooling Built for Professional Trailer Operations A reliable tractor starts with a reliable coupling system. This Actros is factory-equipped with a genuine JOST JSK37C fifth wheel, mounted on a reinforced mounting plate with a factory fifth-wheel bracket. The manually lubricated fifth wheel ensures dependable coupling performance and long service life while supporting a wide variety of transport applications, including fuel tankers, container chassis, curtainsiders, bulk trailers and specialised semi-trailers. Engineered for Demanding...

Condition: as good as new (ex-display), Receiving table for LT series machines, with side sheet metal panel. Length: 1.8 m, with a 2.5 m sheet metal panel. Hfodpfx Aozn It Eoqgon Width: 627 cm. Height: 754 cm.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, *Save on Transport Costs! Up to three platform trailers can be delivered as a space-saving 3-unit stack. Simply assemble the front wall yourself after delivery and benefit from significantly reduced transport costs. *Customized Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. #Chassis High-strength steel welded chassis Fifth wheel with replaceable 2" kingpin Angled outer frame with Load-Lock profile for easy strap attachment 24 t two-speed landing gear, single-side operation, semi-round feet with load compensation Approx. 1,930 mm rear swing clearance Rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Galvanized rear underrun protection Quarter fenders in front of and behind axle assembly Anti-spray mud flaps (EC compliant) Rear impact protection 2 spare wheel carriers incl. mounting kit 1 spare wheel with steel rim Lockable plastic toolbox #Axles & Suspension BPW disc brake axles (430 mm) Laser-aligned axle and suspension system for reduced tyre wear and fuel consumption Air suspension Automatic lift axle with forced lowering and traction aid (activated by pressing the brake pedal 3 times) #Braking System Dual-line air brake system Colour-coded air lines for easier servicing Spring parking brake 2 interchangeable air couplings at front (without connecting lines) EBS electronic braking system with front EBS socket Raise/lower valve Vehicle Stability System (RSS) Suitable only for tractors equipped with ABS #Tyres 385/65 R22.5 tyres Hfjdpfozmtc Aex Aqgsn Steel rims, factory silver #Electrical System 24 V lighting system Multi-chamber rear lights LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front sockets (without connecting cables) #Loading Platform Approx. 30 mm phenolic plywood floor 8 longitudinal support beams Forklift axle load up to 7,900 kg Steel chequer plate reinforcement at rear #Front Wall Approx. 1,350 mm aluminium front wall Heavy-duty steel corner posts Front curtain release system Crash Blocker with integrated steel impact protection #Registration & Certificates German registration EC type approval (2007/46/EC) 24/7 service hotline Optional delivery as a secured 3-unit transport stack Fliegl body strength certificate according to EN 12642 XL ECE R70 rear warning plate

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037809, empty load weight: 7,722 kg, maximum load weight: 31,278 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: white, Archive photos shown. Vehicle may still be in operation. Fliegl Coil Curtainsider Semi-Trailer Hodpfx Ajzl D Iyeqgjfn Chassis: Approx. 8,040 mm reinforced coil well with coil cover, 8 removable coil posts, 4 pairs of internal coil pockets, 1 pair of lashing adapters for coil posts, 4 pairs of removable 6 t Vario-Lash lashing rings, 7 pairs of 5 t lashing rings in the outer frame, 9 pairs of 5 t lashing rings in the coil well, 1 pair of 5 t lashing points in the longitudinal beam, pallet box for 8 Euro pallets, heavy-duty pallet stops with lashing points, spare wheel carrier, 2 lockable plastic toolboxes, galvanized rear forklift mounting bracket, 5 pairs of outer stake pockets and 3 centre stake pockets compatible with coil stakes. Axles & Suspension: SAF disc brake axles, laser-aligned axle geometry for reduced tyre wear and fuel consumption, TIS automatic tyre inflation and pressure monitoring system, air suspension, automatic lift axle with forced lowering, traction aid and electric truck control. Braking System: Dual-line air brake system with colour-coded air lines, aluminium air tank, spring parking brake, raise/lower valve with auto-reset, AAC Basic automatic unloading axle (manoeuvring aid up to 20 km/h), WABCO SmartBoard displaying axle loads, mileage and diagnostic messages, axle load monitoring via EBS CAN bus. Wheels & Tyres: 435/50 R19.5 tyres with polished aluminium wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables), 2 × 7-pin rear sockets for truck-mounted forklift. Floor: Approx. 30 mm plywood floor for forklift axle loads up to 5,600 kg. Front Wall: Front bulkhead with two pairs of lashing rings and integrated storage compartment accessible from inside. Side Posts: 3 pairs of sliding posts, 5 post positions, 6 widening adapters (+25 mm each). Load Securing: 7 rows of aluminium side slats, 1 pair of Vario steel slats and 1 Vario locking beam for front and rear load securing. Roof: Fliegl Blitz sliding roof, Anti-Ice system with central air hose and automatic venting via brake light signal, Fliegl Easy Fix system with 12 pairs of strap holders integrated into the roof bows, EcoLift lifting roof (approx. 380 mm).

Condition: new, Year of construction: 2026, functionality: fully functional, StoMill 1000 – Our cost-effective root reducer for automated processing. Our StoMill 1000 is a compact root reducer for the reliable processing of roundwood with diameters up to 1,200 mm and log lengths up to 20 m. In addition to the reducing operation, logs can also be debarked through manual repositioning; an optional automatic repositioning device is also available. The logs are fed using a forklift or crane. An 8-channel radio remote control is available for operation, enabling simple, automated control. This makes the StoMill 1000 particularly suitable for smaller to medium-sized woodworking operations. The advantages of the system at a glance: Low operating costs with the same reducing result due to extremely low drive power of 15 kW Option: Reducing shaft with 22 kW drive power Low power consumption and, above all, hardly any expensive peak power All systems with patented safety blade shaft Hfjdpfxjztapvo Aqgsn Fully automatic sequence of the reducing process Radio remote control with 2 programs and control of the clamping device and ejector The log can be repositioned several times and thus, if required, also completely debarked Optional with automatic repositioning device Carrier discs for log rotation with a wide, grippy support surface including lateral protective cover Wear-resistant carrier disc drive Practical chip box Since the chips are very short, they can be burned immediately in the wood chip system All systems with control cabinet and oil tank heating, therefore unrestricted operation even at sub-zero temperatures. Safety device, CE approval including declaration of conformity The following questions are important to us: What log lengths do you process? Do you want to reposition the logs or perhaps also debark them with the reducer? With what device (gripper, forklift, etc.) are the logs placed on the reducer? Should the logs be automatically ejected after the reducing process? How should the system be set up to achieve an optimal workflow? How high should the system be? Is a conveyor system for the removal of the bark advantageous? Is an automatic log feed required for repositioning? Should an automatic transfer of the log to another machine take place? Based on these questions, we determine the optimal position of the reducing shaft, the length of the machine, and the necessary technical equipment. Our modular system allows for a precise adaptation of the root reducer to your specific application.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012535, empty load weight: 3,860 kg, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2026, next inspection (TÜV): 06/2027, loading space length: 7,750 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: silver, Year of construction: 2026, Demonstration vehicle - Please note: images shown are archive photos. The vehicle may currently be in use! #Chassis – centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly angled, new design, featuring a "Load Lock" profile for lashing strap attachment - 1 pair of geared landing legs front, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 1 pair of geared landing legs rear, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 2 wheel chocks with holder - Side impact protection, aluminium - Underrun protection, steel - Quarter-shell mudguards - 2 plastic tool boxes with drawer and insert shelf, w=650 / h=520 / d=670 mm, lockable with a padlock #Towing gear – centre-axle trailer - Drawbar with certified 50 mm towing eye, general haulage version - Lower coupling head on drawbar - Folding bracket with spring support on drawbar, guiding the connecting cables to the truck #Axles + suspension - SAF disc-brake axles, 430 mm disc diameter - "Axles/chassis laser-measured" reducing tyre wear and fuel consumption - Air suspension with lift & lower valve #Wheels and tyres - 385/65 R 22.5", manufacturer's choice - Steel rims, factory silver #Braking system - Two-line compressed-air braking system - Spring-loaded parking brake - Vehicle stability system Hedpfx Aqszw Ep Negjfn - Duomatic connection front, with connecting line to towing vehicle, direction of travel right - EBS electronic braking system, EBS connector front with connecting cable #Electrics - 24V multi-chamber LED lights, yellow LED side marker lights, LED number plate light (note: false fault warnings possible with certain towing vehicles despite correct function) - 2 white position lights front - 2 white/red outline marker lights rear - 1x 15-pin plug front with connecting cable, direction of travel right - Reversing camera system, colour flat-screen monitor, wireless link, screen with suction-cup mount, powered via 24V vehicle socket #Floor - Phenolic-coated plywood, approx. 30 mm, high point-load capacity - Note: floor warping possible due to weather - "Premium floor sealing", sealed all round - Platform length approx. 7,750 mm #Front wall / front corner posts - 25 mm aluminium hollow-section, 1,950 mm high, corner posts steel, reinforced profile, +2 additional centre supports - Front wall internally lined with 1,250 mm high phenolic-coated plywood #Centre stakes - 2 pairs of folding stakes at side-board height, foldable and removable #Side boards - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, without tarpaulin rail #Rear wall / rear corner posts - 1 pair of folding stakes at side-board height, foldable and removable - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, with internal folding step #Country of registration / plates - Warning plate ECE-70 - Warning plate "A" for waste transport, foldable - ADR warning plate at rear, foldable #Paint finish - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation"

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,250 kg, maximum load weight: 14,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,120 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for central-axle swap trailers Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15 m, 7.45 m, and 7.82 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) 1 pair of front gear-driven support legs, with straight lower section and single-sided operation on the right side 1 pair of rear gear-driven support legs, with straight lower section and single-sided operation on the right side Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection Rear mud flaps across the entire width *Towing equipment for central-axle trailers Towing beam with certified 50 mm tow eye, freight forwarding version Towing beam clamped/bolted, easily replaceable and partially adjustable in length! Lower coupler on towing beam, free towing beam length approx. 2200 mm Folding bracket with spring support on the towing beam, for routing the connection cables to the truck *Axles + Suspension SAF disc brake axles “Laser-aligned axles/chassis” reduces tire wear and fuel consumption Air suspension without lift axle *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake Duomatic connection at the front, with connecting line to the tractor unit, connection at the rear right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection at the rear right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability Control System Brake release function via a pushbutton on the vehicle next to the lift & lower valve, for releasing the brake while coupled; EBS power supply must be ensured! *Wheels and Tires 385/55 R22.5" Manufacturer's choice Steel rims, factory silver *Electrical System 24 volts, multi-chamber LED lights, yellow LED side lighting, LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection on the right rear Additional LED work light(s), recessed and integrated into the rear, activated via the reverse light LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of Registration/License Plates Germany With DEKRA approval and certification (per §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Hodpfxezd Trre Aqgefn Warning sign per ECE - 70 ADR warning sign at the rear, foldable Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,250 kg, maximum load weight: 14,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with central-axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15 m, 7.45 m, and 7.82 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) 1 pair of front transmission support legs, with straight lower section and single-side operation on the right rear 1 pair of transmission support legs at the rear, with straight lower section and single-side operation on the right side 2 wheel chocks with holders Aluminum side impact protection Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection Rear mud flaps across the entire width Half-shell fenders Mud flaps *Towing Equipment for Central-Axle Trailers Towing beam with certified 50 mm tow eye, freight carrier version Flat flange plate for tractors with a clearance-type low-bed trailer, connected to the towing beam at the top and bottom Towing beam clamped/bolted, easily replaceable, and partially adjustable in length! Lower coupler drawbar, free drawbar length approx. 2200 mm Fold-down bracket with spring assistance on the drawbar, for routing the connection cables to the truck *Axles + Suspension BPW disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake system 2-line compressed air brake system Color-coded wiring for easy servicing. Air reservoir: 208 liters Air-spring parking brake, Control panel at the rear right Duomatic connection at the front, with connecting line to the tractor unit, connection at the rear right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection at the rear right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, hold function in both lower and lift positions Vehicle - Vehicle Stability Control System *Wheels and Tires Hsdezd Udcepfx Aqgsfn 385/65 R22.5" Manufacturer's choice Steel rims, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting Connectors for electrical and air connections on the drawbar 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at FR-right 2 additional LED work lights, recessed and integrated into the rear, activated via the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of Registration/License Plates Germany With DEKRA approval and certification (per §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Warning sign per ECE - 70 Night parking sign front and rear Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,970 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for central-axle trailer Fine-grained steel welded construction Front stop, transverse, in a foldable/adjustable design, as previously delivered with AU 257359 1 pair of removable guide rollers, front and rear 1 additional pair of removable guide rollers 4 container locks with sturdy arms based on 20" for swap bodies 7.45 m and 7.82 m 1 pair of front transmission support legs, with straight lower section and single-side operation on the right side 1 pair of rear transmission support legs, with straight lower section and single-side operation on the right side (FR) Side impact protection set inward, for optimal clearance to the swap body supports Hfsdpezd U I Uofx Aqgjn Steel underrun protection *Towing equipment for central-axle trailers Towing beam with certified 50 mm tow eye, freight forwarding version Flat flange plate for tractors with underrun-protected LBW, connected to the drawbar at the top and bottom Drawbar clamped/bolted, easily replaceable and partially adjustable in length! Under-coupler drawbar, free drawbar length approx. 2150 mm Folding bracket with spring support on the drawbar, for routing the connection cables to the truck *Axles + Suspension SAF or BPW disc brake axles “Laser-aligned axles/chassis” reduces tire wear and fuel consumption Travel odometer/odometer Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake, Control panel in the front right Duomatic connection at the front, with connecting line to the tractor unit, connection in the front right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection in the front right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability Control System Brake release function via a pushbutton on the vehicle next to the lift & lower valve, for releasing the brake when coupled; EBS power supply must be ensured! “TPMS” Tire Pressure Monitoring System according to ECE R 141, display in the towing vehicle via EBS *Wheels and Tires 385/65 R22.5" steel rims, factory silver *Electrical System 24 volts, multi-chamber LED lights, yellow LED side lights, LED license plate lights, (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) Yellow LED side lights linked to the turn signals “Flashing side lights” Parking sockets for electrical and air connections on the drawbar 2 white LED front position lights 2 white/red LED rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, located on the right rear 2 additional LED work lights, recessed and integrated into the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Prepared for single-line license plate holder Night parking sign at front and rear *Paint Finish Frame Hot-dip galvanized or painted according to customer preference

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,500 kg, maximum load weight: 15,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,260 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15- and 7.45-meter swap bodies Note! Not suitable for 20" containers, or only possible if the container has a tunnel or opening at the front center approximately 200 mm long and 800 mm wide! Swivel frame with heavy-duty ball bearing swivel ring 2 wheel chocks with holders Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Half-shell fenders Rear mud flaps across the entire width *Trailer Coupling Device (Turntable) Towing fork with certified 40 mm tow eye Spring-loaded towing fork height adjustment *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions *Wheels and Tires 385/65 R22.5" Manufacturer’s choice Steel rims, factory silver, ET 120 *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof connectors at the front, with connecting cable, 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear *Paint finish Hfodpfx Ajzd U Uuoqgen Frame Hot-dip galvanized or painted according to customer specifications Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires Hfjdozlkgcjpfx Aqgsn 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: used, Centering infeed conveyor Söderhamn 443. With log rotation, for logs and cants. Infeed conveyor Soderhamn 447, for logs and blocks Reducer Soderhamn 245 15" disc 3 spiral Hfjdpfxsy Th Upe Aqgsn

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 09623212, Soundproof housing Motor power: 3 kW Dimensions of the grinding chamber: 220 x 170 mm Number of rotor blades: 3 Number of stator blades: 2 Rotor diameter: 170 mm Rotational speed: 270 rpm (at 50 Hz) Sieve hole diameter: 5 mm The mill is new and has never been used! Hedpfxezimw Ej Aqgsfn PRICE REDUCED FROM 5950 TO 5350 EUR!!!

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012090, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: silver, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption Hjdpozggicjfx Aqgefn * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 8x4, wheelbase: 2,510 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: red, driver cabin: day cab, gearing type: automatic, suspension: steel, loading space volume: 20 m³, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power mirror, retarder, seat heater, soot filter, - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Leaf spring suspension - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air-suspended seats - Air horn - Particle filter - Radio/Multimedia system - Rotating beacon - Reversing camera Hfsdpozm Ralefx Aqgon - Seat heating - Sun visor - Lane keeping assist - Stability control - Windshield Internal number for inquiries: 6-051 MAN TGS 41.480 8x4 BB dump truck – top class!!! "TECNOCAR Emil-Camion S4" NEW AT PAVIC -> Available in various colors. Currently available in RED. Vehicle data: - Diesel engine MAN D2676 LFBI, 480 hp - Euro 6e - MAN TipMatic 12.28 OD with retarder 35 - Auxiliary drive, gearbox-driven - Driving program MAN TipMatic Performance, Efficiency and Offroad, up to 70,000 kg - Drive 8x4 - Suspension Leaf/Leaf - Differential locks on driven rear axles - 2,505 mm main wheelbase, 1,400 mm wheelbase between rear axles - 390 l fuel tank volume, 35 l AdBlue tank volume - Disc brakes on both front axles, drum brakes on both rear axles - Cab NN: the practical one (narrow, medium length, normal height) - Lifting roof, mechanical - Driver's comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating - Sun blind door side windows, interior, mechanical, driver's side - Cool box - Infotainment control MAN SmartSelect with touchpad and direct access buttons - Multifunction steering wheel, leather, adjustable in height and inclination - MAN Media System Professional Navigation 12.3 inches - MAN Sound System Advanced - Navigation map Europe - Smartphone integration - Towing hitch/trailer coupling - Electronic Stability Program (ESP) - Anti-Slip Regulation (ASR) - Cruise control (speed limiter) - Emergency brake assist EBA Plus - Turning assist - Driver attention alert MAN AttentionGuard, non-deactivatable - Preparation for alcohol interlock, non-bypassable - Front detection, deactivatable - Traffic sign recognition - Reversing motion system - Without distance warning - Without MAN SafeStop Assist - Tire pressure monitoring system - Blind spot assist - Reversing assist - Device for installing an alcohol-sensitive immobilizer (alco-lock) - Intelligent Speed Assist (ISA) - Warning system for drowsiness & reduced driver attention (DDAW) - Collision warning system for pedestrians and cyclists - Floor mats & seat covers Body data: Dump truck in top quality from market leader EMILCAMION from Italy - 20 m³ - Steel construction made of HB 450, floor 8 mm, sides 6 mm - Hydraulic tailgate - Lateral and rear reflective contour marking - Side marker lights LED - Stainless steel fenders - Stainless steel trim parts - Spare wheel holder - Stainless steel toolbox on passenger side - Manually foldable rear bumper - Electric tarpaulin, black - Two-tone paintwork (e.g.: NARDOGRAU AUDI LY7C, door frames and tailgate black) ...

Condition: new, Year of construction: 2018, New R&B Plastics Machinery MAX 5-Extruder System Heavy-duty, purpose-engineered multi-extruder system manufactured by R&B Plastics Machinery, consisting of four MAX 1-1/4" × 30:1 extruders mounted over one MAX 2" × 24:1 main extruder, complete with specialty mounting structure, material loaders, heated adapters/hoses and centralized Allen-Bradley PLC controls. The system was fully assembled, integrated, inspected and pre-shipment tested at R&B's Saline, Michigan facility and has never been placed into production. Extruders (4) R&B MAX 1-1/4" × 30:1 X102 or equivalent bimetallic barrel liners Interchangeable standard-output screws Rossi gearboxes with high-temperature Viton seals 5 HP Marathon AC motors Four heat/cool barrel zones Heaters, high-speed blowers & dual thermocouples Rupture discs & pressure transducers Watlow melt-temperature probes & mica band heaters Stainless-steel hoppers Adjustable 45° feed-throat/carrier assemblies (1) R&B MAX 2" × 24:1 Main Extruder Non-vented, air-cooled configuration MAX IMPACT high-output screw Colmonoy 56 flight lands X102 or equivalent bimetallic-lined barrel 25-30 HP Marathon Blue Max TEFC motor Rossi helical gear reducer Maximum screw speed: 100 RPM Three individually controlled heat/cool zones Melt-temperature & pressure transducers Stainless-steel hopper and water-cooled feed section Multi-Extruder Mounting System Engineered for 4 × 1-1/4" extruders over 1 × 2" main extruder Heavy-duty welded mounting frame Individual adjustment posts & safety stops Specialty extended main base Material Handling & Transfer (5) Foremost B-6-2 self-contained vacuum loaders (4) R&B heated adapter assemblies (4) heated hose assemblies, up to 12 ft R&B MAX PLC Control System Allen-Bradley CompactLogix PLC 15" Allen-Bradley operator control screen (4) 5 HP + (1) 25-30 HP Allen-Bradley VFDs PLC-controlled extruder heating/cooling Air-conditioned main electrical cabinet EWON remote-access system Integrated wire trays and electrical distribution Designed for 380 V / 3 Phase / 50 Hz Open-architecture electrical drawings, machine logic and documentation Condition: NEW / Never Used Complete documentation and operating manuals available. Important Scope Information Hfodpezz Thbefx Aqgen Profile/die tooling and water bath are not included. Proprietary zipper/profile tooling and associated proprietary components are not included. The control cabinet contains provisions for additional downstream equipment, including water-bath and winder connections; these provisions should not be interpreted as inclusion of that downstream equipment in this R&B system listing. Equipment is stored and ready for shipment. Inspection available.

Condition: used, mileage: 300,430 km, power: 335 kW (455.47 HP), first registration: 09/2021, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, color: silver, emission class: euro6, Equipment: ABS, crane, You can find our complete vehicle inventory with vehicles available immediately or in the short term on our website. Excerpt from the equipment list. Complete equipment list available upon request. * Cab: MB 9744 brilliant silver metallic W2X, weight variant 26.0 t (8.0/11.5/7.5) M2S * Engine, R6, 10.7 l, 335 kW (455 hp), 2200 Nm G2B * Transmission /14.93-1.0 G5G * Mercedes PowerShift 3 Z5M * Auxiliary drive * Single front axle * Crooked design * Front axle 8.0 t * Rear axle, bevel gear 440, hypoid, 13.0 t * Tag axle, 7.5 t, steered * Front axle with air suspension, load-reducing * Tank 500L, left, 650 x 565 x 1600 mm * Aluminum K3V AdBlue tank 60 L, left * Disc brakes, on front and rear axles * Electronic braking system with ABS and ASR Hfsdpfx Aezz Um Eoqgon * Heater, electronic compressed air supply unit * L-cab StreamSpace, 2.30 m, tunnel 170 mm * Driver's air-suspended seat, comfort DIN, co-driver's functional seat * Navigation system * CB radio, 24 V * LED daytime running lights * Automatic high beam/low beam and cornering lights * Fog lights, halogen * Side marker lights, flashing * 4 work spotlights on roof lamp carrier * 2 rotating beacons, LED, on roof lamp carrier * Predictive Powertrain Control * Stability control assistant (ESP) * Lane keeping assist * Attention assist * Traffic sign assist * Active Brake Assist * Cruise control * Hill start assist, speed limitation 30 km/h * Climate package * 4 work spotlights on roof lamp carrier * 2 rotating beacons, LED, on roof lamp carrier 1) * Low-profile container platform body * 2 pairs of container locking mechanisms, extendable to approx. 3,000 mm for accommodating 20-foot containers * Side hardwood floor, approx. 30 mm, central module with gray sanded surface * Front wall, approx. 1,900 mm high, with approx. 9 mm wear-resistant screen printing on the inside * Fixed rear wall, approx. 600 mm high * Internal platform dimensions: approx. 6,300 x 2,480 x 600/1,900 mm * Front wall with approx. 9 mm screen printing on the inside * Toolbox on the right side, approx. 800x500x500 mm 1 MKG loading crane HLK 531HP a5 * Base unit with lifting and knuckle arm, hydraulic five-section extension, max. outreach extended approx. 14.25 m * Incl. warning horn, outreach/max. lifting capacity (hydraulic) * Lifting arm position + 20°: 4.35 m/ 10530 kg, 5.90 m/ 7660 kg, 7.85 m/ 5640 kg, 9.90 m/ 4390 kg, 11.95 m/ 3590 kg, 14.10 m/ 3030 kg * Plus optional additional supports with 2 direct support cylinders, hydraulically extendable sideways, radio remote control in cross-lever design * 2 swivel motors 56,000 Nm

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Completely Overhauled – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005. This machine will undergo a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good technical and optical condition and will be ready for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Completely Overhauled Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Work Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 will undergo a comprehensive and professional overhaul in our facility. As part of the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally repaired or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire work tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul is completed ## Quality Inspection and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality inspection. This includes, in particular, a detailed erosion test according to the quality and testing requirements of OPS INGERSOLL. This test will verify the relevant machine functions as well as the accuracy and process reliability. ## Ready for Production After Overhaul Hsdoz Atdrspfx Aqgsfn After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit will be immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large work area, this machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively overhauled wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability.