Used Reis Rv30-26-Rsvi for sale (7,246)

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse - for the production of technological chips - a powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives - engine power 110 kW - conveyor belt length 5000 mm - 50 x 50 mm sieve - three upper pulling toothed shafts - four lower pulling toothed shafts - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Transport dimensions Iodpfx Ageihpg Es Ajtn 1100x245x240 cm weight about 10 t

Condition: ready for operation (used), ITEM NO. FS 200504B 200 506 A 26 Power supply unit, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Itsdsi Eb U Hopfx Ag Ajn

Condition: ready for operation (used), NUM FC 939970-B, 939 970 B 26, electronic module, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Isdpfxji Eb U Ue Ag Astn

Condition: ready for operation (used), Rotary indexing center RT100/12-26 Manufacturer: Pfiffner Serial number 1101141101 Operating hours: 42,500 Iedpfx Aei Ewn Eeg Astn Footprint: 14m x 8m

Condition: new, Year of construction: 2023, grinding wheel size 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2.25 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle Itedsul Emwepfx Ag Aen EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, Year of construction: 2023, grinding wheel size 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M3,5 EW17,5° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Iedpfx Ajul Enzjg Ajtn

Condition: new, Year of construction: 2023, grinding wheel size 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M7 EW20° 2GG from the company 3M Itodpfeul Eprsx Ag Aen Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: used, functionality: fully functional, Year of construction: 2023, fuel type: diesel, power: 33 kW (44.87 HP), drive type: Diesel, Yard loader Technical condition: New Front tires type: Pneumatic Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Bulk material bucket, Pallet forks 3rd valve, 4th valve, Pitbull Compact loader X27-26 26hp Kubota 4 cylinder Trelleborg 400/50-15 T463 EURO mount Halogen lighting kit LED work lights left and right rear piece LED bar front piece License plate holder with lighting 1x DW, mechanically operated + 1x DW, electrically operated via button on joystick Incl. mechanical switch with bucket lock 3rd function Inching arrester, controllable via joystick Combi trailer coupling, ball and pin 12 volt connection for trailer lighting rear Itedpfeumy Acex Ag Ajn

Condition: good (used), Machine reamers, reamer, reaming tool, fitting knife cutting set -Machine reamer: Shell reamer with holder Ijdpeucahvofx Ag Aetn -Diameter: Ø 26 mm -Shaft diameter: Ø 16 mm -Total dimensions: Ø 25 x 120 mm -Weight: 0.3 kg

Condition: good (used), Attention! Please do not use the pre-formulated query field from Maschinensucher, ask your own questions in this field. Please fill out the query field yourself. This is the only way to get an answer. Office containers, containers, break containers, construction containers from Containex - used, - good condition, - dry, - leak-proof, - ready for immediate use, - available in multiple quantities, - not for rent Dimensions: Length: 6.00m Width: 2.50m Height outside: 2.80m Height inside: 2.50m Equipment: - heating, - double plastic windows with tilt and turn function, - roller shutters, - lockable door, - cement-bonded floor slab with PVC floor covering Loading and transport can be organized Only serious and reputable inquiries will be answered, stating: Itsdjrgpl Repfx Ag Ajn Name, email address and telephone number.

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing Isdpfx Agerhmnzs Aotn -Total dimensions: 87/76/H54 mm -Total weight: 1.8 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 83/77/H53 mm -Total weight: 1.8 kg Itedperhmn Ejfx Ag Ajn

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available Itsdsriicfspfx Ag Asn -Total dimensions: 76/85/H60 mm -Total weight: 2,3 kg

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, DGUV certified until: 07/2027, type of input current: AC, input frequency: 50 Hz, year of last overhaul: 2026, BS series: Pretzels and rolls slicing machine Schickart model: BS 26 Tabletop machine for slicing or scoring Stainless steel design Iedpfeqy A Tiex Ag Aotn DGUV V3 certified – available only from us 220 V connection Used machine, cleaned More top-quality slicing machines in stock!

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Dimensions total: 78/78/H75 mm Ijdpfxeq Tvqvj Ag Aetn -Total weight: 2.5 kg/set

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Flender -Type: 2 GR200/230 -Input: 380 V 50 Hz -Output: 165 V 300 Hz Ijdpfx Aod Nlf Reg Aetn -Power: 26 KVA -Dimensions: 1300/560/H380 mm -Weight: 390 kg

Condition: good (used), Year of construction: 2016, Synchronization of the saw carriage - 6 pieces available Itsdpfouzxrgjx Ag Asn

Condition: good (used), Year of construction: 2002, Saw blade diameter: 350 mm Cutting capacity: Round: 120 mm Square: 100 x 100 mm Rectangular: 170 x 100 mm 2 saw blade speeds: 34/68 rpm Drive motor: 380 V, 2/2.6 kW Weight approx.: 300 kg Space required approx.: 800 x 700 x 1770 mm Isdpsy Uv Itefx Ag Astn

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: Itjdjvc Apbopfx Ag Ajn approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: like new (used), Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a wide range of products and to ensure quality standards. Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with just a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratories, production, quality assurance, and development when testing a wide range of products. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measurement positions. Secure measurement values without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measurement position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test piece, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Itsdpfx Agjzn I N He Aen Manually operated positioning device available as an accessory for measuring individual test specimens for the digi test II and the Gelomat. Modular attachments for the Centrofix can be used to clamp and fix samples and molded parts of any kind for measurement.

Condition: used, Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH and IRHD on composite materials, soft-elastic materials, elastomers, plastics and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex and concave geometries of composite materials, soft-elastic materials, elastomers, plastics and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Interchangeable measuring devices enable a simple change between the numerous measurement methods in the areas of Shore, IRHD and VLRH without tools and with only a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratory, production, quality assurance and development when testing a broad product portfolio. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave or convex geometries, you will receive exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence Isdpfxjzn Na Ts Ag Astn In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples thanks to its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which gives you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for the measurement of individual test specimens for the digi test II and the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of any type to be clamped and fixed for measurement.

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, loading space length: 4,950 mm, loading space width: 2,110 mm, color: yellow, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Welcome to carmax24! Today, you have the opportunity to purchase one of our selected, inspected vehicles. Expertly inspected and high-quality vehicles guarantee high customer satisfaction, and have done so since 2008. This is our daily approach because you, as a customer, are our top priority at carmax24. Iveco Daily 35S18HA8, Euro VI, 176 hp, 3.0 Diesel, 8-speed automatic transmission - New Model Technical Data: * Type: 35S18A8H * Engine: Euro VI, 176 hp * Displacement: 3.0 l * Transmission: Automatic transmission * Wheelbase: 4100 mm * Color Code: Yellow * Permissible total weight: 3,500 kg * Vehicle type: Truck * Additional: Rubber floor mats Special equipment from the factory: * 00344 - Rear-view camera * 05925 - Additional, adjustable, and switchable speed limiter * 07629 - Without acoustic reversing warning signal * 00744 - Window in the rear wall of the cab * 06064 - Reinforced double parabolic springs in the rear (for S models) * 08628 - Storage compartment above the windshield STYLE PACKAGE 3.5 S * 79336 - Daily radiator grille with chrome strips * 01553 - Emblems in "Gun Metal" * 02443 - Leather steering wheel * 02308 - Aluminum rims Daily * 72625 - Full LED lighting (daytime running lights, low beam, high beam) COMFORT PLUS PACKAGE * 00259 - Sprung-mounted comfort driver's seat with lumbar support and armrest * 01611 - USB ports (A + C) for driver and passenger * 75082 - Passenger double seat bench with folding table and 3-point belts * 07196 - Air conditioning compressor 170 cm³ * 01605 - Infotainment system "NAVI MY IVECO" with 10-inch display * 14522 - Adaptive cruise control (ACC) with radar sensor * 06650 - Automatic climate control and heating system * 79297 - Comfort headrests made of memory foam with Daily logo Body Specifications - Platform * Dimensions: approx. 4900 mm x 2100 mm * Single cab Body Construction * Aluminum frame made of welded special profiles * Loading area made of non-slip, perforated aluminum plates * Openings reinforced with stainless steel inserts * Aluminum loading ramps (340 mm wide, 2500 mm long) * Ramps stored in drawers, can be moved across the entire width * Central locking system for the loading ramps * Movable winch frame * Simple bicycle protection cover * Fenders with mud flaps (2 pieces) * Trailer hitch + second hitch with socket * Toolboxes (500 mm - 2 pieces) Itodpszpdi Eefx Ag Aen * Painted sides, railings, and rear panel * Reinforced edges with aluminum angles * Additional lashing points (8 pieces) Electrical System * Rear lighting mounted on the vehicle frame * LED side marker lights (orange, 6 pieces) * LED contour lights (white/red, 2 pieces) * Trailer sockets (2 pieces, 13/7-pin) * Work spotlights H3 in the front (2 pieces) * Main switch Additional Options * Electric winch SUPER WINCH TS9500 (4.2 t) * Front railing (high) * Warning light bar Yellow LED * Additional work light LED Our special service for you: * Maintained according to service schedule at authorized dealers and master workshops * Winter tires available for an extra charge * Extended warranty up to 36 months available for an extra charge * We will gladly and fairly take your used vehicle in trade! * Financing possible from 6.99% with or without down payment up to 96 months, subject to credit approval * TÜV / DEKRA main and emissions test

Condition: used, input voltage: 400 V, C-profile press for industrial company. Make: Unknown Iedjyzb Urspfx Ag Aotn Model: Unknown Weight: around 4000 kg Capacity: approximately 300 t

Condition: used, maximum load weight: 25,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2019, loading space length: 1,335 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 50 m³, * Reisch RHKS-3-SG13 steel tipper body 50 m3 * First registration 2019 * Lifting axle * Alloy wheels * Air suspension * SAF axles * Recessed lashing eyes Itodpezaznnofx Ag Aon * Unladen weight: 9,800 kg * Gross weight: 35,000 kg * Payload: 25,200 kg * Internal dimensions: 13.35 x 2.35 x 1.50 m

Condition: used, 4-bag dust extractor SIA 8/26 Itodpfx Ajzkh Etsg Aon