Used Renner Rsf 250 D-7,5D for sale (53,397)

Condition: used, Year of construction: 2010, Technical details: swing diameter: 260 mm control: 840 D SIEMENS Hedstpq Urjpfx Adzjr turning speeds: 3.500 1/min spindle drive: 36 / 28 kW chucking diameter: 260 mm travel -x axis: 900 mm travel -z axis: 400 mm turret head: 12 Pos. tool holder: VDI 40 rapid power traverse in X-and Z direction: 100 / 30 m/min dimensions of the machine ca.: 5,3 x 2,4 x 3,31 m CNC vertical lathe with 2 spindles, 2x RÖHM power chucks dia. 315mm, *

Condition: excellent (used), Year of construction: 2012, Large grinder for fresh meat, these models were previously known as Wolfing C250UNI. Excellent condition. With de-gristle unit. Hedsvvn Icopfx Adzor

Condition: used, Year of construction: 2002, Deckel Maho DMF 250 linear Type: VRF 250 / 1250 Year of manufacture: 2002 Operating hours: 18,696 h Defects: Hodpjyu Rx Sofx Adzjr Z-axis brake defective, machine enclosure shutter defective, monitor cable defective. Deckel Maho DMC 63 H Installed weight: 18 t Dimensions: 6.6 m x 6 m x 3.2 m Year of manufacture: 2002 Machine damage: System does not boot up anymore. Photos of the error message are attached. No other damages known.

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Hodpjy U Nqnefx Adzor

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,288 h, functionality: fully functional, machine/vehicle number: 936, workpiece weight (max.): 150 kg, power: 8 kW (10.88 HP), workpiece length (max.): 800 mm, workpiece width (max.): 600 mm, number of support arms: 16, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with an optional support system and can therefore accommodate one large workpiece or a maximum of 16 smaller workpieces on the supports. TECHNICAL DETAILS Turbine power: 8 kW Workpiece size (single workpiece) max.: 800 x 600 mm Workpiece weight (single workpiece) max.: approx. 100 kg Number of positions in the support system: 16 Workpiece size (on support system) max.: 200 x 200 mm Workpiece weight (on support system) total max.: 150 kg Filter data Number of filter cartridges: 2 Total filter area: 20 m² Filter area per filter cartridge: 10 m² Air velocity: 1.25 m/min Compressed air data Compressed air pressure: max. 4–5 bar Compressed air consumption: approx. 7 m³/h Compressed air connection: G 1″ Permissible negative pressure: max. 1,500 Pa Dust container: 20 l Residual dust content in the exhaust air: below 5 mg/m³ MACHINE DETAILS Control unit: Pulse/time: 24 V, 1 phase, 50 Hz Solenoid valves: Voltage: 24 V, 50 Hz Timer: Input/output voltage: 24 V, 50 Hz Operating hours: 2,288 h Fan data Air flow: 2,000 m³/h Static pressure: 1,800 Pa Hsdpfozh Nf Asx Adzer Total pressure: 2,000 Pa Power consumption: 2.2 kW Motor power: 1.1 kW Motor voltage: 400 V Motor frequency: 50 Hz Motor phases: 3 phases EQUIPMENT Filter cartridges with 10 m² filter area each Aluminum venturi tubes Solenoid valves, type CA 25 DD Timer CG 03.06/04 Filter group Pressure regulator Pressure gauge 1″ ball valve Dust container, 20 l Fan

Year of construction: 2003, condition: good (used), Product Description:  Web width: max. 10 inch – 254mm  1x die cutting unit  1 x inking unit UV Flexo 1-color with corona and dust removal  1 set of impression cylinders  Unwinding 850mm  Winding on large roll and small roll possible  Ran all the time only in single-shift operation. Machine Specifications and Equipment: _____ Hedpfov Ubfxsx Adzer Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) _____

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: DHD/250/100, functionality: fully functional, input voltage: 400 V, pressing force: 250 t, stroke length: 600 mm, operating speed: 170 mm/s, reverse speed: 250 mm/s, table width: 1,200 mm, table length: 1,000 mm, ram plate width: 1,200 mm, ram plate length: 1,000 mm, total length: 2,000 mm, total width: 2,700 mm, total height: 4,500 mm, control cabinet height: 1,800 mm, control cabinet length: 800 mm, control cabinet width: 500 mm, die cushion force: 100 t, die cushion stroke: 200 mm, electrical fuse: 63 A, installation height: 900 mm, pressure: 235 bar, Euroblech 2024 trade fair machine - Hamburg location. Hsdpettriaefx Adzsr

Condition: used, mileage: 475,905 km, power: 188 kW (255.61 HP), first registration: 05/2019, fuel type: diesel, tire size: 385/55 R22.5, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 7,250 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, Year of construction: 2019, Equipment: Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, parking heater, power mirror, spoiler, tail-lift, = Additional options and accessories = - Electric windows - Enhanced engine brake - I shift - Locking differential - Preparation OBU - Radio Bluetooth - Remote central locking - Sleeping cabin - Speed limiter - Sun visor = Remarks = Tailgate Plateau length: 2300 cm = More information = Hsdpfxoxm S Has Adzer Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Drivetrain Engine type: Volvo I SHIFT Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/55 R22.5; Steering; Tyre profile left: 55%; Tyre profile right: 5%; Suspension: leaf suspension Rear axle: Tyre size: 315/70 R22.5; Double wheels; Differential lock; Tyre profile left inner: 55%; Tyre profile left outer: 55%; Tyre profile right outer: 55%; Tyre profile right outer: 55%; Suspension: air suspension Weights Empty weight: 7.723 kg Carrying capacity: 10.877 kg GVW: 18.600 kg Functional Tail lift: HOLLANDIA DHLM, tail lift, 2500 kg Make of bodywork: Berkum Plywood gesloten Layout Number of beds: 1 Identification Registration number: 51-BNH-9

Condition: like new (used), Year of construction: 2021, operating hours: 730 h, functionality: fully functional, clamping force: 2,700 kN, nominal power: 22 kW (29.91 HP), operating pressure: 265 bar, We offer this like-new DESMA D 969.250 Z (S3) rubber processing machine, manufactured in 2021. Closing force: 2700 kN Hjdjzgvxyspfx Adzsr Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short-circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive flow rate: 72/39 l/min Pump drive power consumption: 32.0 A Pump drive power: 22 kW Nozzle system force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Operating hours: hydraulic motor: 730 hours, hydraulic pump (closing force): 65 hours, operating system: active 3,360 hours Ideal for the production of: • technical rubber molded parts • seals and O-rings • automotive and industrial components Condition & Availability: • Machine is available for immediate delivery • Condition: very well maintained / regular servicing • Inspection possible by arrangement Other: • Documentation and accessories available on request • Assistance with disassembly / loading / transport can be arranged If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, •Revolver head overhauled in 2021 •High-pressure/high-flow KSS pump installed in 2021 •Draw tube renewed and spindle housing re-bearinged and lapped in 2022 •Prepared for automatic loading of parts using a robotic cell Hsdpfx Adsvr Tkzszsr Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Turning diameter max. 550 mm Turning diameter max. 480 mm Turning length 1000 mm Spindle bore 78 mm Drive power (50%) 53 kW Speed range (1-stage) 30 – 4000 rpm Drum turret Number of positions 12, of which 6 are driven Cylinder shank 40 mm Speed range (2-stage) 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT/ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock controlled via program including various centering tips  Drum turret, 12 positions  Drive unit for turret  Chip conveyor  Coolant system with increased pump capacity, approx. 4 bar  Interface for automation  Various accessories  1 Heimbuch collet chuck SK 80, without collets  1 3-jaw chuck Schunk Rota NCF 315  1 3-jaw chuck Schunk Rota NCF 250  1 2-jaw chuck Schunk Rota NCF 250  1 Impact head WTO  2 driven tools CAPTO-axial tool  2 driven tools CAPTO-axial radial tool  3 driven tools CAPTO-radial tool  7 fixed tool holders  Mounting elements  Documentation

Condition: used, mileage: 387,000 km, power: 188 kW (255.61 HP), first registration: 08/2020, fuel type: diesel, overall weight: 14,300 kg, axle configuration: 2 axles, color: brown, gearing type: automatic, emission class: euro6, loading space volume: 44 m³, loading space length: 7,400 mm, loading space width: 2,430 mm, loading space height: 2,450 mm, Equipment: ABS, air conditioning, tail-lift, Renault D 14.250 Box Van, Full Air Suspension, LBW Euro 6 Internal number for inquiries: 0626570 * Overall condition: very good * Power: 188 kW / 250 hp * Engine displacement: 7,698 cc * ABS * EBS * Differential lock, rear axle * Adaptive cruise control with emergency braking assist * Lane keeping assist * Suspension: Air / Air (Full Air) * CD radio / USB / AUX / Bluetooth * Air-suspended comfort driver's seat * Suspension: Air / Air (Full Air) * Air conditioning * Electric windows, driver / passenger side * Electrically adjustable and heated mirrors * On-board computer * Exterior sun visor, transparent * Underrun protection Tail lift: Dhollandia, load capacity up to max. 1,500 kg Body: Box van * Wear-resistant floor, wood * Rub rails, left / right Dimensions (cargo space / loading area) Cargo space length: 7,400 mm Cargo space width: 2,430 mm Cargo space height: 2,450 mm Tires: 1st axle: 285 / 70 R19.5, 40% tread, air-suspended 2nd axle: 285 / 70 R19.5, 75% tread, air-suspended ----Price: 31,900 EUR + 19% VAT Hjdpezhc Taofx Adzsr For further questions, you can reach us on the following telephone numbers: * We speak: German, English, French, Polish and...? Typographical errors, errors and prior sale excepted.

Condition: good (used), mileage: 144,490 km, power: 140 kW (190.35 HP), first registration: 06/2018, fuel type: diesel, tire size: 245/45R18, axle configuration: 4x2, wheelbase: 3,430 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,370 mm, total width: 1,930 mm, total height: 1,880 mm, loading space length: 1,660 mm, loading space width: 1,420 mm, loading space height: 1,290 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Tinted windows - None - LED lamp - Alloy wheels - Manual - Radio/cassette - Rear view camera - Partition = Notes = Configuration: 4x2, Payload: 742 kg, Tare weight: 2358 kg, Gross vehicle weight: 3100 kg, Towing capacity, unbraked: 750 kg, Towing capacity, middle axle, braked: 2500 kg, Tow hitch, Alloy wheels, Type of cab: Double cab, Cruise control, Air conditioning, Number of airbags: 6, Rear window wiper, Parking assistance: Front and rear, Tinted windows, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: Silver, Metallic, Rear view camera, Lighting type: LED lamp, Climate control, Bluetooth, Engine power: 140 kW (188 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side panels, Roof rack: None, Side doors: 2, Side windows: 4, Rear closure: Tailgate, Central locking, Number of seats: 5, Seat arrangement: 1+1+3, Seat covering: Leather, Seat adjustment: Manual, L3 XL Double Cab 190 hp Electric doors + tailgate 360 Camera Tow hitch PDC LED Euro6!, Spare wheel, Tire type: Summer tires = Additional Information = General Information Number of doors: 2 Registration number: V-52-PLK Hodeyylc Rjpfx Adzer Axle Configuration Tire size: 245/45R18 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Weights Unladen weight: 2,358 kg Payload: 742 kg GVW: 3,100 kg Functional Height of loading area: 52 cm Interior Upholstery: Leather Maintenance APK (Technical Inspection): valid until 06.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 560 € per month (delivery van, 72 months); Please inquire for more information and terms.

Condition: new, Year of construction: 2025, Suction nozzle diameter: 250mm Maximum volume flow: 5000 m³/h Nominal volume flow: 3534 m³/h Volume flow monitoring: Pressure difference display Filter area: 25.4 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 db Hedpfopfat Esx Adzor Scavenging bag volume: 480 l Filter cleaning: mororic Motor power: 5.5 kW Extinguishing device: yes Machine length: 3510 mm Machine width: 880 mm Machine height: 2545 mm Weight: 850 kg

Year of construction: 1996, condition: used, machine/vehicle number: MBMAKZ, Demag chain hoist Crane hoist 250Kg DKUND 2-250 K V1 with double chain 125Kg payload each 250KG / 0.25t payload / lifting capacity - 1 fall Distance between the two lifting chains approx. 1.2m (can also be shortened) Lifting height approx. 3.5m Complete with control cylinder (approx. 3m) Hsdpfx Adstn Rirozor Weight complete approx. 60 kg, connection to 400V 50Hz TOP condition, fully functional. No worn or used device! Connect and put into operation. Comes from current operation Item location is 75053 Gondelsheim See pictures

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a HAGER HDG 250 lathe in mint condition with a center width of 1,000 mm. The exhibition machine is in original condition, therefore you have the full warranty. Technical data - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) safety groove Hsdpfx Aetpnykedzjr - Spindle bore (diam.) 20 mm - Tailstock quill 150 mm / MK3 -Hand rest upper section 300 mm -Weight 270 kg -Length x width 1,800 x 640 mm - Motor 2.2 kW / 3 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, lathe machine, lathe, lathe, woodturning, woodturning machine, turning, woodturning knife, turning, machine, Hager Reference: R-A0117

Condition: excellent (used), Year of construction: 2019, COURSE ROOM MACHINE For sale is a used Hager HDG 250 lathe with a center height of 250 mm. The machine was used in our in-house lathe courses, is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: Hsdpfortqi Iox Adzer - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) drain safety groove - Spindle bore (diameter) 20 mm - Tailstock quill 150 mm / MK3 - Hand rest upper part 300 mm - Weight 270 kg - Length x width 1,800 x 640 mm - Motor 2.2 kW (3 HP) - Speed 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, lathe, woodturning bench, turning, woodturning knife, woodturning, turning, machine Reference: DH25500-K

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 636, type of input current: three-phase, total width: 1,800 mm, input voltage: 400 V, input current: 10 A, lifting height: 2,000 mm, load capacity: 250 kg, 31 C – Gerber LS-250-LU Automatic Fabric Loading System – Industrial Spreading Line Unit Description For sale is a Gerber automatic fabric loading system (Model 250 LU), designed for seamless integration into industrial fabric spreading and cutting lines. This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly improving workflow and reducing manual labor in high-volume production environments. The system has been operated as part of a complete and synchronized production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This setup allows a continuous workflow from roll loading to spreading and cutting, minimizing downtime and maximizing throughput. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video in working condition taken 5.3.2026. Includes • Gerber automatic fabric loading unit • Motorized lifting and roller feed system • Adjustable frame structure • Integrated control panel and switches Hjdpfxoy Av H Se Adzjr • Heavy-duty steel frame with wheels Technical Details • Manufacturer: Gerber Technology • Model: LS-250-LU (Loading Unit) • Year: 2004 • Serial number: 636 • Type: Automatic fabric roll loading system • Lifting capacity: up to 250 kg • Machine weight: approx. 300 kg • Voltage: 3 × 380 V • Frequency: 50 Hz • Current: approx. 10 A System Functionality • Automated lifting and positioning of fabric rolls • Precise alignment with spreading machines • Smooth and controlled feeding into spreading systems • Mobile design allows flexible positioning between lines Production Advantages • Eliminates manual lifting of heavy fabric rolls • Improves operator safety and ergonomics • Reduces downtime during roll changes • Enables continuous, high-efficiency production flow • Ensures consistent material alignment for spreading Integration • Designed for use with Gerber spreading systems (e.g. SY 101) • Fully compatible with automated cutting lines (e.g. Lectra Vector systems) • Suitable for synchronized production environments Condition Used industrial condition Recently serviced on 27.02.2026 Operational prior to factory shutdown Typical signs of industrial use Inspection recommended prior to purchase Sold as-is, where-is, without warranty Typical Applications • Fabric spreading lines • Textile production workflows • Cutting room automation • High-volume garment manufacturing Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional handling recommended due to size and weight

Year of construction: 2017, condition: used, Used overhead crane system with vacuum lifting device Year of manufacture: 2017 Load capacity: 250 kg (at the lifting device) Crane travel: 6 m Bridge: 6 m Vacuum lifting device B 3 UW H K 250 V Hedpezc Agdjfx Adzjr with 2 oval suction cups 500 x 2500 mm Vacuum generation: pneumatic with ejector Operating pressure: 7 bar filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely variable Operation via special handle on the vacuum lifting device. The lifting movement is controlled infinitely variable via a frequency converter. Availability: short notice Storage location: Flörsheim

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1114.3705-24, Used CNC Lathe Make: Boehringer Type: VDF 250Cm Year of Manufacture: 1997 VDF Boehringer 250C The machine has the following features: 1000mm turning length No tailstock Driven tools Special indexing chuck Siemens 840C control system The Boehringer VDF 250Cm is a CNC lathe designed for machining chucked parts. It is characterized by its robust construction and precise machining capabilities. Technical Specifications (Model Year 1997) Working Area: Swing over Bed: 550 mm Swing over Cross Slide: 480 mm X-Axis Travel: 405 mm Z-Axis Travel: 1,099 mm Maximum Turning Length: 1,000 mm (None) Tailstock: Tool Turret: Number of Positions: 12 Tool Holder: VDI 50 DIN 69880 Live Tools: YES Spindle: Spindle Head Size: 8 DIN 55026 Spindle Bore: 103 mm Max. Chuck Diameter: 315 mm Max. Drive Power (50% Duty Cycle): 53 kW Max. Torque: 780 Nm Speed Range: 30–3,000 rpm Hedpfxjwlap Ae Adzor Feeds: Automatic Feeds: 1–10,000 mm/min Rapid traverse speed: 10 m/min (X and Z axes) Max. feed force: 15 kN Dimensions and weight: Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm Machine weight: approx. 11,000 kg Equipment: Pivoting control panel Hydraulic system from HYDROKRAFT Coolant system with 600 l tank, max. pump pressure 5.5 bar, flow rate 60 l/min, pump power 1.1 kW Chip conveyor with 325 l tank capacity, right-hand discharge 3-jaw power chuck Oil mist extraction Control cabinet with cooling unit and temperature controller from RITTAL Control system: SIEMENS SINUMERIK 840 C Variants and Differences There are various variants of the VDF 250 series, such as the VDF 250 CU, which can be equipped with different control systems (e.g., PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are designed as pure chuck-type lathes without a tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe characterized by its stability and precision. With its robust construction and extensive features, it is ideally suited for machining chucked parts in a variety of production environments.

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Hsdpfx Aewlkcajdzer Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Hedpfx Adswz R Iuszor Delivery time: by arrangement Freight basis: ex-works

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel in X-axis: 2,500 mm Travel in Y-axis: 920 mm Travel in Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Shipping packages: 3 EQUIPMENT External coolant system Chip conveyor Tool magazine (30 pieces) Hjdpfx Ajzdkhksdzsr

Year of construction: 2010, condition: ready for operation (used), A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripheral equipment and automation. Documentation available. An on-site inspection is possible. Hjdpozfp Hhefx Adzer

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Hodpfx Adevvlyiezor Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: like new (used), TETRA PAK CARDBOARD PACKER CBP 32 VERSION 400 YOM 2010 2177 RUNNING HOURS ONLY!! MULTI PACKER FOR 200/250/1000 ml AS NEW CONDITION LOCATION - POLAND Hedpfx Adjya I Sgjzer READY FOR SHIPPING