Used Replacement Base for sale (8,659)

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Work table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. depth of cut in one pass: 8 mm Min. workpiece length: 260 mm Cutter shaft diameter: 120 mm 4 Knives: 35 x 3 x 640 mm Cutter shaft speed: 4,500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction connection diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table elevation with 2 speeds and micrometric adjustment - Thickness table with vertical movement via 4 steel-threaded spindles - Electronic control with 2 axes for setting: * the input value of the thickness table * the feed speed - Stepless feed speed adjustment from 4 to 20 m/min via inverter - Feed speed automatically adapts in relation to the main motor’s maximum power consumption - Upper ribbed steel roller at infeed - Two upper rubber-coated feed rollers at outfeed - Replaceable feed rollers - Independent pneumatic pressure regulation of the upper feed rollers - Motor power: 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta starting: * S1: 7.5 kW / 10 HP / 50 Hz (8.8 kW / 12 HP / 60 Hz) * S6 -40%: 9 kW / 12 HP / 50 Hz (11 kW / 15 HP / 60 Hz) Safety/Protection - Noise dampening protection at infeed and outfeed - Micro safety switch at protective cover - Emergency stop switch at front and rear of the machine - Lockable main switch - Motor protection switch - Low-voltage circuit (110 Volt) - Automatic motor brake - CE Declaration of Conformity Product code: S 7 109999 Standard safety regulations 530314 TERSA – Cutter shaft (monoblock version) with disposable double-edged knives 083201 Base frame 930731 Volt 400 EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Dkjdpsy D U A Iofx Ad Nsl Availability: short-term Location: Flörsheim

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, volume flow: 90 m³/h, total width: 2,950 mm, total length: 3,800 mm, total height: 2,300 mm, energy consumption: 1 kWh, Innovative Band Filter Technology for Maximum Process Reliability The RESY KBF Compact Band Filter System represents a groundbreaking advancement in the field of automatic band filter units. A key advantage: There is no relative movement between the conveyor belt, filter fleece, disc wheels, and sludge scrapers. As a result, the filter fleece remains undamaged even with large amounts of chips or dirt particles. Dedjy Evxyepfx Ad Nekl Compared to conventional flatbed filters, the compact band filter offers: down to 80% less space required higher level of purity consistent filtration performance reduced maintenance intervals maximum process stability Operating Principle of the Compact Band Filter A robust, endless metal hinge belt is guided in a semi-shell shape over two rotating disc wheels and driven by a geared motor. The filter fleece is positioned between the belt and the wheels. The contaminated medium is introduced via a central inlet pipe directly into the fully sealed filtration tank. In the calm zone, solid particles settle and form a filter cake. This filter cake acts as an additional natural filtering layer, continuously improving separation performance. As contamination increases, the liquid level rises — depending on design, up to 500 mm. When a preset maximum value is reached, the system automatically feeds in fresh filter fleece without interrupting the filtration process. Simultaneously, the following are reliably discharged: used fleece sludge chips gross particles An integrated sensor continuously monitors the diameter of the fleece roll and signals in good time when the roll needs to be replaced. The entire filtration process operates fully automatically and energy-efficiently. Custom Configuration for Your Application The actual filtration performance depends on various process parameters, including: flow rate medium (e.g., emulsion, oil, process water) inlet concentration desired filtration fineness particle size and material characteristics The compact band filter is configured individually based on your technical requirements. Typical Application Areas metalworking grinding processes turning and milling operations coolant preparation process water purification chip and sludge filtration

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, • Used device with upgraded cathode systems o LAB6 cathode o Tungsten cathode • EDX (Energy Dispersive X-ray Spectroscopy) allowing direct chemical analysis in the SEM • Lens-mounted 5-channel BSD • Infrared camera mounted on the chamber door • Maintenance by manufacturer (Zeiss and Oxford Instruments) until 2024 • 2x 19” flat screen monitors • Joystick controller for stage movement • Ergonomically designed control console • Software module for automatic centering of any image detail • Stage base plate, motorized X+Y axes • Stage assembly includes tilt, rotation, and Z-axis; removable Accessories • Transport lock and transport castors • 2x Wehnelt + anode + 3 tungsten filaments • Table spacers (3 pieces, different heights) + tools • 1x 9-position sample holder for rods o Collimator shorts 150 o Collimator long etc. 150 o Collimator long 50/80 mm² MK2 • 1x fixed aperture holder • 2x 100 μ VP – aperture • 1x 750 μ VP – aperture • 2x 20 μ aperture • 1x 30 μ aperture • 1x 100 μ aperture • Various tools (tool kit) and sealing rings Dksdpfx Aoy Ep S Rjd Nel • 1x Lens-mounted 5-channel BSD (1 EVO BSD DIODE 5 CH Standard, low light sensitivity. With signs of use, possibly for replacement) AZtec Adv Rec. 3.2 + Update 2024

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,600 h, control type: CNC control, Main Features of the Machine Dsdpfx Aey E Tured Njkl Smart access to fiber laser technology. Excellent cutting performance and high-quality cutting of thin to medium-thickness sheet metal. A wide range of applications. In addition to steel, stainless steel, and aluminum, non-ferrous metals can also be processed with excellent quality. Easy operation and intuitive process control enable quick adoption of fiber laser technology. Higher profit per part. Fast cutting processes combined with relatively low operating costs and minimal maintenance requirements. Flexible process solutions. Bystronic’s software and automation solutions optimally integrate the BySmart Fiber into sheet metal processing environments. Technical Data: Machine length (L): 12,765 mm Machine width (W): 7,535 mm Machine height (H): 2,880 mm Nominal sheet size (X): 4,000 mm Nominal sheet size (Y): 2,000 mm Cutting area (X): 4,120 mm Cutting area (Y): 2,110 mm Cutting area (Z): 100 mm Maximum positioning speed of parallel X/Y axes: 100 m/min Maximum simultaneous positioning speed: 140 m/min Bidirectional positioning repeatability of one axis R (according to ISO 230-2:2014): 0.05 mm Mean bidirectional positioning deviation of one axis M (according to ISO 230-2:2014): 0.1 mm Edge detection accuracy: ± 0.5 mm Maximum workpiece weight: 1,900 kg Laser source: Fiber 6000 Power: 6,000 W Power range: 600–6,000 W Wavelength: Fiber Table change time: 36 s Maximum material thicknesses: ⁠•⁠ Steel*: 25 mm •⁠ ⁠Stainless steel: 30 mm •⁠ ⁠Aluminum: 30 mm •⁠ ⁠Copper: 12 mm •⁠ ⁠Brass: 15 mm •⁠ ⁠with optional BeamShaper function Chiller: Yes Dust extractor: Yes Automatic plate loading: No Total system power consumption (including extraction and chiller): * 21 kW * Power consumption data represents an average based on 4 reference cutting plans for structural steel with thicknesses from 1–10 mm. Machine Condition: The machine has been regularly serviced. No components have been replaced. Condition: as new.

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off Dedpfx Adoy D Nktj Nokl 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031174, empty load weight: 5,835 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2026, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22.5, color: grey, Year of construction: 2023, The images shown are archive photos. The vehicle may still be in use. Chassis Tipping Semi-Trailer Fine-grained steel welded construction in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Dkedpfx Asy Efcusd Nsl Curved front wall (patented) 24 t 2-speed support legs, single-sided operation, with straight base, without compensating rod 2x wheel chocks with holder Aluminium side underrun protection Rear under-run protection, foldable 6x half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarpaulin rod with bracket 2x rear towing hooks Axles & Suspension BPW disc brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle with automatic lift, including forced lowering and starting aid, operated by '3x brake' application Braking System 2-line compressed air braking system Colour-coded routing for easy servicing Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: This trailer must only be towed by tractor vehicles that ensure ABS functionality! With lift & lower valve Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Tipping Body Aluminium box body made of high-quality, abrasion-resistant material Sloped 5 mm thick front wall with external cylinder mounting Side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail. Internal ladder at the front wall Shovel and broom holders outside front wall Rear wall with pendulum mounting and 'double-joint' hinges, with 2-winged door split 1/2 to 1/2, upper swing beam, with one grain slide per door Rear wall with rubber seal 6 mm continuous floor Standing platform with access, connecting plate for air/electric/brake Roll tarp can be stowed one side (FR-right), with central locking (FR-left) Operating Notes For transporting salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion and damage from the material. The total weight stated is technically possible; depending on the cargo, the full weight may not be achievable within the permissible axle/support/saddle loads (incorrect load distribution may result in poor handling and tracking). Note! Not suitable for chemically aggressive substances (e.g., acids, chlorine compounds, sulphur compounds, alternative fuels); such substances can cause stress corrosion cracking and extreme cracking in the body when combined with moisture on the body surface! Vehicles with load bodies are intended for chemically non-aggressive cargo. Use for transporting aggressive goods such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at the operator's own risk. This can result in damage such as stress corrosion cracking or pitting. Archive images are shown!

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, machine/vehicle number: RDX-500-071501, laser wavelength: 532 nm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, type of input current: three-phase, overall weight: 750 kg, total length: 1,500 mm, total width: 1,200 mm, total height: 1,850 mm, feed length X-axis: 300 mm, feed length Y-axis: 300 mm, feed length Z-axis: 100 mm, Equipment: documentation/manual, type plate available, This ultrashort-pulse laser processing station (Pulsar Photonics RDX 500) is currently in operation. It ist used for ablation/patterning of transparent conductive coatings (e.g., ITO) and for precision glass cutting. A system demonstration can be arranged upon request. In its current configuration with an 532 nm (green) laser, the machine is also suitable for applications in the field of microstructuring and micromachining. Our partners can develop the specific parameters for your usecase. The replacement value of this machine is around 415 000 € Scope of Delivery The exact scope of delivery will be confirmed in writing prior to sale. Subject to change. Laser system Pulsar Photonics RDX 500 (base machine) Laser source EdgeWave PX25-2 Control PC with software 2D galvanometer scanner unit with Newson Scanner Controller A2G_CUA01 incl. F-Theta objective PULSAR PHOTONICS CAMERA MODULE CM-R1 for workpiece positioning Camera-based measurement function (for position and reference measurement) 1 tool parameter set for ITO thin-film ablation 1 tool parameter set for glass cutting Additional tool parameter sets can be developed on request Extraction device for ablation particles Vacuum chuck with vacuum pump for fixing flat samples CAM software: Rhinoceros 5.0 incl. PhotonicVectors plugin (licence) Documentation/Manual Nameplate present Accessories as agreed Documentation package Key Technical Data Dodpjx Uzwgsfx Ad Nskl Laser Type Ultra-short pulse laser (USP / Picosecond) Pulse Duration 10 ps Wavelength 532 nm Average Power < 20 W Repetition Rate 100 kHz – 20 MHz Laser Serial Number SN0702 Machine Serial Number RDX-500-071501 Processing Axes 2.5 axes (X/Y processing + Z-axis for focus/depth adjustment) Scanner Unit 2D galvanometer scanner with Newson Scanner Controller A2G_CUA01 incl. F-Theta objective Processing Area Min. 210 mm x 290 mm (exact dimensions to be specified) Control Software Windows 7 with Photonic Elements (scanner, camera, laser, axes control; CAD-CAM import, live view) and Rhinoceros 5.0 incl. PhotonicVectors plugin for job preparation CAM Software Rhinoceros 5.0 incl. PhotonicVectors Plugin Voltage / Electrical Power 400 V, 5.8 kW Dimensions (L×W×H) 1,500 × 1,200 × 1,850 mm Weight approx. 750 kg Laser Safety Class Laser Safety Class 1

Condition: defective spare-parts repository (used), Year of construction: 1995, Shredder, make Weima WL 14, with fire damage – for dismantling or refurbishment. The following parts can still be used: base frame with hopper and drawer, rotor with gearbox, discharge screw, perforated screen. All other components must be replaced. Dsdpfoy Aryuex Ad Nokl

Condition: excellent (used), Year of construction: 1962, machine/vehicle number: 12.178, 🛠️ WALDRICH SIEGEN WS IIa 100/25 x 5000 CNC roll grinding machine – The perfect base for a retrofit! Get your hands on a high-quality roll grinding machine from WALDRICH SIEGEN – renowned for its exceptional stability and precision in heavy-duty applications. The machine was converted to CNC by Herkules in 1996 and is in excellent mechanical condition. ⚠️ Important – but your opportunity! Dksdpefbb D Defx Ad Nsl The machine is currently not operational as the electrical equipment and CNC control system need to be replaced. 👉 Your advantage: Take advantage of this opportunity for a bespoke retrofit and get state-of-the-art technology at a fraction of the cost of a new machine. 💰 📊 Technical highlights 🔩 Grinding diameter up to 1,200 mm 📏 Length up to 5,000 mm ⚖️ Workpieces up to 25 tonnes ⚙️ Grinding wheel up to 900 mm Ø 🚀 Drive power up to 97.5 kW 🎯 Precision up to 0.001 mm 🧰 Features 🔄 Cylindrical & crown grinding 🖥️ CNC grinding support 🔁 Automatic feed with wear compensation 🎨 Partially modernised & repainted 💡 Why this machine? ✅ Solid industrial quality ✅ Perfect for modernisation / retrofitting ✅ Ideal for large roller machining ✅ Significantly cheaper than comparable new machines 👀 Viewing available at any time! Flexible appointment available 📅

Condition: new, functionality: fully functional, Year of construction: 2026, The FM230 extractor is characterized by small dimensions and at the same time high efficiency of up to 1000 m3/h. Standardly equipped with a metal rotor and a running base. Great value for money, which makes it an uncompromising device in its category. Many years of effort by our team resulted in the creation of a multi-patch metal impeller of the WhirlWind series, which, together with the massive metal casing, constitutes the heart of the extraction system. The vacuum air draft perfectly sucks excess sawdust generated during mechanical processing of wood, produced during machine operation. The massive construction of the extraction unit has been enriched with additional supports in the base to ensure stable and vibration-free operation of the device. The entire structure has been reinforced with appropriately thick supports that keep the chute cylinders and the weight of waste bags in the right position on a massive base. Dksdpfxsvu Az Us Ad Nsl An additional advantage is the use of a flexible and durable gasket placed in a critical place to improve the tightness of the entire system. As standard, we equip the extractors with canvas bags (filter and waste) and additional disposable, durable plastic waste bags. Flexible metal bands ensure long-term trouble-free operation of bag replacement. The use of swivel and ball-bearing wheels ensures efficient movement of the extractor around the facility. Machine characteristics The perfect machine for both professionals and amateur carpenters. Optimum extraction performance works perfectly with machines such as: Planers Planers Thickness planers Milling machines Technical data ENGINE POWER 0.75 kW SUCTION PERFORMANCE 1000 m3/h VOLUME OF BAGS 60L NUMBER OF BAGS 2 DIAMETER OF SUCTION PIPE 100mm HEIGHT 1500mm WIDTH 420mm LENGTH 600mm VOLTAGE/FREQUENCY 230V WEIGHT 27kg

Condition: new, Year of construction: 2026, functionality: fully functional, All CORMAK company extractors feature easy operation and quick bag replacement. Wheeled base ensures portability. Extractor's quiet and failure-free operation is provided by a metal rotor. Affordable price with high efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of burlap extraction bag Portability due to 4-wheel base Stable metal construction Default equipment Metal wheeled base 4 burlap bags Optional equipment Galvanised clamping ring 2-micron filter cartridge Technical data Suction efficiency 3900 m3/h Bag capacity 220 L Number of bags 4 Extracting connector diameter 1×150, 3×100 mm Dimensions (L×W×H) 1200×570×2250 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400V Dodsvu A Dispfx Ad Nskl User manual yes EC declaration yes

Condition: new, functionality: fully functional, Year of construction: 2026, All CORMAK company extractors feature easy operation and quick bag replacement. Wheeled base ensures portability. Extractor's quiet and failure-free operation is provided by a metal rotor. Affordable price with high efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of burlap extraction bag Dkjdpfovu Artex Ad Nol Portability due to 4-wheel base Stable metal construction Standard equipment Metal wheeled base 4 burlap bags Optional equipment Galvanised clamping ring 2-micron filter cartridge Technical data Suction off efficiency 3900 m3/h Bag capacity 150 L Number of bags 4 Extracting connector diameter 1×150, 3×100 mm Dimensions (L×W×H) 1400×570×1960 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Condition: new, Year of construction: 2026, functionality: fully functional, FM300 extractor is a simple machine for extracting chips and sawdust. Capability of quick bag replacement and portability due to the wheeled base make our extractor very practical. Additionally, absorber's metal rotor ensures quiet operation. Despite providing such great features as failure-free operation and high efficiency, it is very affordable. Metal balanced rotor ensures vibration-free and quiet operation Quickly mounted BURLAP extraction bag 4-wheeled base makes it portable Stable, metal construction Default equipment Y-shaped extracting connector, 2×100 Metal wheeled base Technical data Suction efficiency 2530 m3/h Engine speed 2850 rpm Bag capacity 150 L Number of bags 2 Extracting connector diameter 1×130, 2×100 mm Dkodpfx Aovu Atwod Nel Dimensions (L×W×H) 940×510×1960 mm Weight 56 kg Motor power 1.5 kW Power supply 3-phased, 400V EC declaration yes

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024288, empty load weight: 6,075 kg, maximum load weight: 32,925 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 50 %, color: blue, Year of construction: 2018, The images are archive photos! The vehicle may still be in use! Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly sloped with "Load-Lock profile" for lashing strap attachment. Note! To attach the straps in combination with sideboards, the sideboards must be opened! 24t, 2-speed landing gear, single-sided operation, with straight base, without compensating slide Pull-out ladder at the rear Side door retainers 2x wheel chocks with holder Attention! Only Chassis No. 2024286 - 89: Pallet box for 30 Euro pallets (ground clearance approx. 220 mm) Underrun protection, galvanized steel Quarter-mudguards in front of and behind axle assembly With EC-compliant anti-spray flaps Rear impact protection Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with a padlock (padlock not included) Axles + Suspension SAF axles "Axle/chassis laser aligned" reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated by "brake 3x" (starting aid functions up to a 30% axle overload and up to max. 25 km/h) Brake system 2-line compressed air brake system, color-coded lines for easy servicing. Spring-type parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Wheels and Tyres 385/65 R22.5, manufacturer at the manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights Dkodpfx Adsy Dfpro Nol 2 white position lights at the front 2 white/red lane control lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Front bulkhead / corner stanchions 2, 580mm high, steel corner stanchions in volume design, release mechanism for side curtain at the front bulkhead "Crash-blocker", internal steel impact protection at about 140mm height Center stanchions 3 pairs of sliding stanchions movable along the full length, with 4 insert pockets and a long pocket at bottom 3 pairs of stanchion positions Rear wall / rear corner stanchions Rear corner stanchions up to the lower edge of the roof, curtain attachment with round tube and ratchet tensioner Rear portal doors, two-leaf, each with two internal rotary bolt locks Tarpaulin Tarpaulin with integrated horizontal and vertical belts Tension latches made of stainless steel Roof Sliding roof, rear liftable end, can be slid from rear to front, tarpaulin color: white Optimized rain gutter at rear, on top of the rear bow, above the doors Operating instructions When assembling combinations, ensure compliance with the legally permitted overall vehicle height! If the total height exceeds 4,000 mm, please observe the following: The transport contractor is responsible for any resulting damages. The transfer agent must obtain permission according to § 29 StVO We assume no liability for the transfer of the vehicles. The images are archive photos! The vehicle may still be in use!

Condition: excellent (used), CNC Turning-Milling Center Gildemeister CTX gamma 1250 CT, Year 2016 Pictures to follow... Available from March 2027 Base machine: CTX gamma 1250 CT with a turning length of 1250 mm - main spindle as integrated spindle motor, ISM102, drive power 35/45KW (100/40% duty cycle), 4000 rpm - partial hollow clamping device (hydraulic), draw tube inner diameter 104 mm x 848 mm depth - C-axis and spindle brake (hydraulic) - upper cross-slide with turning/milling spindle as motor spindle with hydraulic clamping during turning, HSK-63A DNI 69893 interface - Y-axis ±200 mm - B-axis ±120°, torque motor - disc-type tool magazine with 36 stations - NC tailstock with bearing-mounted, hydraulically movable quill, fixed center - absolute, direct linear measurement systems in X, Y, Z1 axes - coolant pump 6 bar; 20 l/min, plug-in screen filter 10 µm filtration - cooling system for spindle motors, motor console, turning-milling spindle, B-axis torque motor - CNC control with ERGOline operating panel (manufacturer and type per control description) - USB interface, Ethernet interface CNC Control: SIEMENS Sinumerik 840D solutionline with ERGOline Control, SINUMERIK Operate and ShopTurn 3G, Linux OS at no extra cost Tool chain magazine for 120 tools replaces disc-type magazine (36 tools), HSK-A 63 DNI 69893 interface, - only with Siemens control - Mechanical oil mist separator 100 m³/h, filter class H13 Chuck flush device at the main spindle, external, Coolant supply through turning spindle Tropical package for machine environment temperatures up to 40°C, consisting of control cabinet cooling unit (up to 40°C) B-H7080 workpiece touch probe, BLUM, with Quickstart cycle package including probe TC60 with transmitter and receiver unit, HSK 63A tool interface, 1 stylus, measuring cycles B-Z0908 3D data model of the specified machine workspace in Step and IGES format. Delivery of the 3D data model on CD. B-L7000 Standard electrical interface Profibus Handheld control unit: Axes X1Y, 1, Z1, C1, B1, X2, Z2, Z3, C3, C4 can be jogged and moved incrementally using the handwheel. Emergency stop and feed override functions are available on the handset. Tailstock feed force increased to 20kN. SK-2014-3518 The tailstock is supplied without quill bearing to allow fitting of a twist-proof pressure device. When used as a tailstock, a rotating center must be used. Coolant cleaning system: - Filter unit type: FK 20 * Filter performance 20 l/min * Filter medium: filter fleece PN100/100 - Coolant tank 950l type: FKA/950 - Magnetic roller type: MW180 - Process pump 5 bar (50 l/min) - Process pump 20 bar (40 l/min) with DBV 20/40 - Control cabinet Chip conveyor type 300 S-2: - Wear-resistant version (guides and base plates made from XAR) - Return pump 1.2 bar (100 l/min) etc. The full equipment and further technical data can be found in the documentation, which we are happy to provide on request. The machine has always been serviced by Gildemeister customer service and is in technically perfect condition. It can be inspected under power and during production. Dimensions & weight: (LxWxH) Machine CTX Gamma DL 125 – 580x280x285 cm, 20,000 Kg Chip conveyor 670x125x160 cm, 1,000 Kg Total weight incl. accessories 22,605 Kg Number of packages 11 Loading meters: 21 Dismantling, removal, shipping, and reinstallation can be organized. Dkedpoy Axuxjfx Ad Nsl

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Dksdpevz U Ersfx Ad Nsl Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: new, Year of construction: 2025, Grinding machine with a wide area of application. Material can be ground both at the front and at the back of the machine. It includes two band speeds: 15/30 m/s as well as a mounting system with sturdy prismatic jaws for tubes, flat and square materials. 100×2000 mm grinding belt, 3,3 kW motor. Machine features Clamping system with sturdy prismatic jaws for tubes, flat and square materials Comfortable and simple handling Easy and quick grinding roller replacement Large grinding surface in the upper part of the machine for e.g. deburring or surface grinding 2 belt speeds Stable, vibration-free base 2 dust containers and an anti-dust system for the grinding surface Technical data DIAMETER OF GRINDING 20 - 76.1 mm ADJUST THE ANGLE 30 - 90 ° BELT SPEEDS 860/1720 m / min Dksdpfevxhv Sox Ad Nol POWER 2.5 / 3.3 kW BELT DIMENSIONS 100x2000 mm GRINDER DIMENSIONS 1340x700x1210 mm WEIGHT 159 kg

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Channel Bale Press Presto HPK 50 HS, Year of Manufacture: 2014 Manufacturer: Presto Model: HPK 50 HS Year: 2014 Drive Power: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Feed Opening: 1600 x 650 mm (LxW) Channel Cross-Section: 700 x 950 mm Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Performance at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (LxWxH) Dksdpfeyz R Eysx Ad Njl Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET bottles Note: All knives and counter-knives as well as all sliding plastics have been replaced. The press is in good condition and has been checked and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Please note: All technical data is based on information provided by the manufacturer. We do not assume liability for the information provided or for possible errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is made against advance payment, ex works, without warranty or guarantee.

Condition: new, Number of milling spindles 2 St. fence 1 ja workpiece ja Cross rung milling machine STEGHERR TYPE KSF-mini including standard stop with 2 sliding stops, without tools With the KSF-mini, all of those that occur in practice can be used Crossbar connections can be made quickly and precisely. The Precise execution is achieved by having the workpiece in one Clamping is machined on three sides. The tool is driven by two three-phase motors; the tension of the Workpieces pneumatically. The profile cutter is designed for the web width. The saw blades that... If you carry out flattening, spacer rings are used to match the dimensions of the Profile milling cutter adjustable. The swivel device is free of play. The machine is designed for a maximum workpiece cross section of 56 x 46mm. Voltage Europe: 400V(+/-10%)/3Ph/50Hz, USA: 440V(+/-10%)/3Ph/60Hz Other voltages on request. Operating instructions in German or English. Table base EUR 1.070.00 Foot switch EUR 900.00 Adjustment optics EUR 130.00 Profile milling cutter in HM-Wepla version, available for selection: Ø 5,7,9,11,13 mm. Dsdpfxsyrtzqj Ad Nekl Price per piece EUR 650.00 1 set of replacement insert knives for profile milling cutters (=10 pieces) EUR 190.00 HM saw blade, price EUR 170.00 per piece (For a web of e.g. 10 mm, 3 saw blades are required) Setting the machine to the tools provided by the customer, price EUR 700.00 per individual tool Packaging in a crate (suitable for land transport) EUR 650.00 Packaging shrink-wrapped on a pallet (only within Europe, not for air freight) EUR 340.00 Pricing ex works, unpacked, uninsured, for delivery within Germany plus the VAT valid at the time of delivery. (all technical information according to the manufacturer, without guarantee!)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Dkedpfsyzy Tysx Ad Njl Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Dsdpfx Adeyzw I Ie Nekl Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Year of construction: 2018, condition: used, functionality: fully functional, This combination oven from the manufacturer Rational is a CombiMaster® Plus with 5 x 1/1 Gastronorm shelves in electric version, allowing you to equip each rail with deeper GN containers. (It can also be converted to a 6-rail suspension rack). Dkjdeyzm Nnopfx Ad Nsl This combi oven was mainly used for reheating packaged foods and is therefore in very well-maintained used condition. The combi oven was manufactured in 2018. The unit has been inspected in our in-house workshop and is fully functional. The base frame shown in the pictures is not included in the offer but can be purchased separately as an option. You will receive an invoice with VAT shown. Service: We are happy to help you find a certified Rational customer service provider throughout Germany. This unit is the optimal choice if you are looking for a classic combi oven that you would like to operate manually. Our used equipment service for you: - 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding labor and installation costs - High-quality branded equipment at fair prices - Professional refurbishment / inspection & expert cleaning - Tested & fully operational – or your money back - Shipping or self-collection available by arrangement - Expert advice – before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - Inspection according to DGUV V3 The CombiMaster® by RATIONAL is robust and impresses with functions that enable the highest food quality. It supports the chef’s individual craftsmanship through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow, and cooking time. Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening for transport W x H: 845 x 850 mm Electrical connection: 400 V / Power: 11.0 kW / 50-60 Hz Capacity: 5 x 1/1 GN Weight: approx. 103 kg Serial number: E61MI18072680076 Year of construction: 2018 Condition: used, inspected, fully functional Further information: Application options: - Steam mode: from 30°C to 130°C - Hot air mode: from 30°C to 300°C - Combination mode: from 30°C to 300°C - Finishing®: Bring pre-prepared and chilled foods to serving temperature in optimal climate - Automatic fat separation for clean cooking chamber air - Manual cleaning program - 5 fan speeds: whether gentle or robust, the CombiMaster® Plus has the right airflow speed for every product - Ventilated double-glazing (pivotable for easy cleaning) - Core temperature measurement via probe - Cool-down function - Manual self-cleaning - High-performance fresh steam generator (automatic flushing and draining) - Hand shower with automatic retraction - Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations by arrangement only Subject to change and errors. Do you have questions, need advice, or would like to view something on site? You can reach us by phone during our business hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively subject to our general terms and conditions (AGB).

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations Dodpfx Adjy Ai Ehj Nekl • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Technical Capabilities • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes • Improves worker safety and production cleanliness Condition Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Professional dismantling strongly recommended due to system size and complexity.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC lathe with sub-spindle, two turrets with driven tools, upper turret Y-axis travel 50 mm. Year of manufacture (possibly with repairs, major overhaul): 2005. Upper turret ball screw on X-axis replaced in 2011. Clamping cylinder for spindle no. 1 replaced around 2018. Bearings on both spindles replaced in 2011. Both turrets have undergone continuous overhaul. Technical specifications: - Swing over bed: 700 mm - Maximum turning diameter: 520 mm - Distance between spindle faces: 1500 mm - Sub-spindle travel: 1100 mm Dksdpsyrqnujfx Ad Nel Model: CNC lathe Emco Hyperturn 690MC TCMY plus with sub-spindle, two turrets with driven tools, upper turret Y-axis travel 50 mm. Control unit: Siemens Sinumerik 840D. Accessories: - Driven tools: 2 straight, 2 angular - Toolholders: 2 through-bore, 2 surface-mount - Chucks: 2x hard base jaws Complete documentation for the machine. Additional spare turret head available – fully overhauled.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total width: 800 mm, total length: 1,600 mm, total height: 600 mm, overall weight: 220 kg, manhole location: front, empty load weight: 215 kg, input voltage: 16 V, The Alfa Laval DuraCirc 73 is a hygienic rotary lobe (peristaltic) pump specially designed for use in the food and pharmaceutical industries, where high hygiene standards and reliability are essential. This pump has been engineered to meet strict sanitary requirements and is certified according to EHEDG and 3-A standards, ensuring its suitability for demanding sanitary applications. Key performance parameters include a maximum flow rate of 103.0 m³/h and a maximum operating pressure of 16.0 bar. The pump is powered by a 7.5 kW electric motor, providing efficient and reliable operation. Its compact footprint, with dimensions of approximately 0.85 m in length, 0.45 m in width, and 0.5 m in height, and a total weight of 215 kg, makes it suitable for integration into various production lines. Dkodpfjy Ammvox Ad Nsl The DuraCirc 73 features optimized seals and surfaces that enable effective Clean-in-Place (CIP) and Sterilization-in-Place (SIP) processes, ensuring easy maintenance and high hygiene levels. Its endurance is enhanced by profiled compression elastomers and a robust construction. Maintenance is simplified thanks to a front-mounted single mechanical seal, allowing for quick replacements without dismantling the piping system. The pump supports operation across a wide range of pressures and flow rates and offers the option of reversible flow direction, adapting to different process requirements. It can be supplied with flushed or double seal options and can be mounted on a base plate for additional stability. The electric motor is equipped with cooling fins and a protective cover for thermal management and safety. It is installed on a stainless steel base frame with adjustable feet, ensuring a stable and adjustable mounting platform. Signs of wear and scratches on the motor's paint coating are visible, typical for used equipment. A yellow power cable is connected to the motor, indicating it is ready for electrical connection. In summary, the Alfa Laval DuraCirc 73 combines high hygienic standards with robust performance and ease of maintenance, making it a reliable choice for demanding industrial pump applications where sanitary conditions are of critical importance.