Used Robex Foam Hammer Mill for sale (10,565)

Condition: used, operating hours: 16,911 h, Vehicle No.: 407-25 HITACHI ZX 250 LCN-3 Year of manufacture: 2008 * 132 kW * Hammer circuit * Quick coupler * Cabin protective grille * Undercarriage approx. 70% Hnodpszc Airjfx Ap Hjn Inspection possible at any time during our business hours, test drive by appointment! For export sales, a deposit will be retained and refunded upon receipt of the confirmation of arrival. Company logos or advertising markings on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is provided without guarantee - subject to errors, changes, typographical mistakes and prior sale. Vehicle descriptions explicitly do not constitute guaranteed characteristics. We refer to our General Terms and Conditions, which must be acknowledged.

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Hnsdszdd Apjpfx Ap Hjn Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Hnedpfx Aezdd Acep Hjn Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Drive: 160.0 kW Hjdpezddzfjfx Ap Hjnn Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Hjdpfxozddyzs Ap Henn Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Cutting mill Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw Hedpozddyujfx Ap Henn

Condition: used, Rotor width: approx. 300 mm Hnsdpfxjzddyhs Ap Hen Rotor diameter: approx. 300 mm Stator knives: 6 Rotor knives: 9

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Hollow body granulator and secondary granulator for pre-shredded material Rotor: 450 mm diameter x 600 mm working width 5 rotor blades (angled cut), 2 stator blades Drive motor 22 kW Hedpszddx Rofx Ap Hjnn

Condition: used, HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width (optionally as open 3- or 7-blade rotor) Hnsdpfx Aozddx Dsp Hon Drive motor 110 kw Folding device with electric winch

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Hodozddw Hepfx Ap Henn Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators Hedpfx Aszddwaep Henn The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. With base frame including vibration dampers. Machine data Rotor knives: 5 x 2 Hnjdpfx Ajzddv Nsp Hsn Stator knife rows: 2 Drive: 75 kW

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Hnodpfx Aezddvvep Hen Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Hnodpjzddf Defx Ap Hen Accessories: with used control cabinet Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: like new (used), Year of construction: 2023, MAZAK INTEGREX i-250H S Max. machining diameter: 670 mm Max. machining length: 1,011 mm Max. milling speed: 12,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm The machine is equipped with: - CNC control system Mazatrol SmoothAi - IRCO short bar loader magazine - Integrated robot system TA20/200 - Tool magazine for 112 tools (HSK) - Three-jaw chuck for main spindle, diameter 254 mm - Three-jaw chuck for second spindle, diameter 254 mm - Tool Eye - C-axis - Y-axis - B-axis - Counter spindle with full C-axis - Interface for bar loader magazine - Automatic parts catcher - 5-axis machining, basic package - Preparation for multi-tool and flash tool holders - Preparation for MAZAK Monitoring System B - High-pressure pump, 70 bar Hsdozdkr Aopfx Ap Hsnn - KNOLL compact filter system KF400/2300

Condition: used, Cutting mill / Cutting mills Hjdpjzdddmefx Ap Hjnn Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Hodpfezdc Taex Ap Henn Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Hnodozdc S Njpfx Ap Hjn Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Drive: 160.0 kW Hnsdpfxozdc S As Ap Hon Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required Hnjdpjzdc Rfjfx Ap Hsn With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Hnsdpfszdc Nzex Ap Hen Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: excellent (used), Table milling machine FR 100 Table milling machine: with fixed spindle Feed Spindle: Ø 30 mm and 25 mm Spindle speeds: 3000, 4500, 6000, 9000 rpm Weight: 600 kg Hedjzddqtepfx Ap Hsnn The machine is in good condition and ready for immediate use.

Condition: like new (used), Year of construction: 2013, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 12500 x 2250 mmNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 11500 mmY axis traverse: 1500 mmZ axis traverse: 2000 mmVertical capacity (VC): 150 / 2150 mm (adjustable) Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 30000 mm/min Weight and dimensions Maximum weight on table: 15 Tn/m2Machine weight approximate: 62000 kgMachine dimensions approximate: 18494 x 8412 x 5290 mm Accessories Guarding: front doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC40Chip conveyor: 1 longitudinal rear hinge typeElectronic handwheel: HR-410Coolant: external internal high-pressure through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Hnsdpsyf Rrajfx Ap Hsn

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 3 MAIN SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] Hedpsy I Dixofx Ap Henn - Max. bar diameter : 52 [mm] - C axis indexing precision : 0.0001 [°] COUNTER-SPINDLE - Spindle power : 7.5 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 38 [mm] - C axis indexing precision : 0.0001 [°] TURNING-MILLING SPINDLE - X/Z stroke : 455/800 [mm] - Y stroke : 105 [mm] - B Axis stroke : 120 [°] - B axis indexing precision : 0.0001 [°] - Tool type : HSK50 - Spindle speeds : 30000 [rpm] - Spindle power : 9 [kW] TOOL CHANGER - Tool magazine capacity : 76 LOWER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 48 [kVA] EQUIPMENT - CNC : FANUC 31i MAPPSIV - Linear scales - Tailstock option with counterspindle - Tool probe - Workpiece probe : Renishaw - Bar loader : IEMCA KID 80 - Electric transformer

Condition: good (used), Fritz Werner Universal Tool Milling Machine, Type 5130 An extremely robust and precise universal tool milling machine from the long-established, high-quality German manufacturer Fritz Werner (Model 5130). This conventional knee-type milling machine stands out due to its solid grey cast-iron construction and exceptional reliability. It is ideally suited for workshops, toolmaking shops, repair facilities, demanding DIY enthusiasts, or training centers. The machine features a swiveling vertical milling head with manual quill feed (perfect for additional drilling operations) as well as a mechanical feed gearbox. A standout feature is the retrofitted premium safety spindle guard from Tecno Più. Technical specifications at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Design: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with drawbar) Table dimensions: Approx. 600 x 215 mm with 3 parallel T-slots Axis movement: Manual via precision handwheels (2 mm travel per revolution) + automatic feed (Type 101) Vertical head: Swivels ± 90° with manual quill lever and adjustable depth stop Drive: Three-phase motor (400 V, CEE plug included) Included accessories: Solid machine vise (mounted on table), drawbar, chip guard hood Safety upgrade (included): Spindle guard: Tecno Più S.r.l. (Model PTR 11/180) Year of manufacture of guard: 2017 (CE marked) Function: Impact-resistant polycarbonate shield (180 mm) with IP67 safety microswitch for automatic spindle cut-off when the guard is open. You can find other milling machines—new and used—in our shop! International shipping costs available upon request! Hnjdjzcw Ddopfx Ap Hjn