Used Rowatec Welding Set for sale (15,844)

Condition: new, for 8070-SK 1/2; 8075-RS 1/2 Psdpfx Aj Abcbhei Tjgu Packaging unit: piece Packaging quantity: 1 Engine designation: WD 411.41

Condition: new, 141200010701 Podpfx Aie Abcbno Tegu Packaging quantity: 1 Packaging unit: piece Engine designation: WD 412.40

Condition: new, Applicable to: 8045; 8055; 8055 Turbo; 8060-SK 1; 8060-SK1/2; Turbo; 8065-RS1/2 Turbo Engine designation: WD 308.48 Packaging quantity: 1 Packaging unit: piece Pgedpe Abcclefx Ai Tsu

Condition: new, for 8070-SK 1/2; 8075-RS; 1/2; 8080-SK 1/2 Turbo; 8085-RS 1/2; 8090-SK 1/2; 8095-RS 1 Turbo Pgsdpfxe Abcdcs Ai Teu Packaging unit: piece Engine designation: WD 411.41 Packaging quantity: 1

Condition: new, for 393; 398; 399 with A6.354.4 engine; 1010; 3070; 3075 Pgsdj Abcd Aspfx Ai Tju Packaging unit: piece Engine number: AT 4.236 Packaging quantity: 1

Condition: new, Length: 335 mm Packaging unit: piece Packaging quantity: 1 Pgjdpj Abdbvjfx Ai Tsu

Condition: used, MERKLE Insquare W 300 AC/DC Welding Machine with original hose set Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A Electrode Welding: Electrode diameter: 1.5-6 mm Open-circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding Processes: 10-stage switch: TIG DC Negative, TIG DC Positive, TIG DC Negative with start pulse, TIG AC low-noise, TIG AC Rectangular TIG AC "Balanced TIG", Electrode Negative Electrode Positive Electrode "Sinusoidal" Electrode Rectangular Selector Switch 1: 10-stage switch: Current 1, Time 1, Ramp-up and ramp-down time, Psdpfx Aiel Sm Hbj Tegu Starting current, ending current, Ignition pulse, point time, Pre-gas and post-gas time Selector Switch 2: 9-stage switch: Current 2, Time 2 (for pulse operation), AC balance, AC frequency, Hot start time and current, Current adjustment, Electrode diameter, display U Settings: 2 potentiometers for selector switch 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: 4-stage switch: OFF, Slow pulsing, Fast pulsing, Spot welding Ignition: 4-stage switch: OFF, High frequency, Lift-TIG Energy control: 4-stage switch: on the unit, Hand or foot remote control, Welding torch Operating mode: 4-stage switch: 2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program Program memory: 20 memory locations freely assignable AC frequency: 50-200 Hz AC balance: 9-91 % Pre-gas time: 0-3 s Post-gas time: 0-25 s Current rise time: 0-2 s Current fall time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Slow pulsing: 10 ms-2.5 s Fast pulsing: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200 % Current adjustment: 100-250 % Button: Test protection device Button: Program selection LED: Power ON, Over temperature, Fault, Protection circuit, Display hold, Start current Rise, Current 1, Current 2, Fall, End current Power source: IGBT inverter Ignition: High frequency or Lift-TIG Standard: EN 60974-1 "S" / CE Torch connection: EURO central connection with 5-pin connector Torch cooling: Water circulation cooling system Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Power connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder Gas bottle holder: 10 - 20 - 50 l gas bottle More items - new and used - can be found in our shop! International shipping costs on request!

Condition: new, Wall mounting set, 2 x 10 colored display panels, with PVC film and frame, 2 pieces/box, TARIFOLD · Complete set · Made of coated steel sheet, light gray, RAL 7035 · Version with 2 x 10 display panels: 2 each in red, blue, yellow, green, and black · Delivery includes Pgedpfj Acbb Nsx Ai Tsu Box contents/pieces: 2 x 10 Number of display panels: 2 x 10

Condition: new, Separation tool set 17, opening A 12-75mm, clamping range 300mm, KUKKO · Complete with puller · Quick-release pressure spindle · Special steel · User-friendly design, as the separation jaws are quickly and centrally clamped by a pressure spindle. Application: for removing ball bearings, roller bearings, inner rings and other flush-fitting parts, especially for automotive, agricultural and industrial mechanics. · Other technical features: Weight: 4.77 kg Opening A: 12 - 75 mm Opening B: 75 mm Nominal size: 1 Pgsdpfj Ab Iyisx Ai Teu

Condition: new, Ball bearing puller set 69, 7-piece. Spanning range: 20-95mm, KUKKO. · Operating principle: Access is gained through the bearing rings. This requires destroying the ball cage. Subsequently, the ball segments of the puller, corresponding to the balls of the bearing, are inserted between the inner and outer rings of the bearing and secured by rotating them 90º. After screwing the puller's draw bolt into the puller segments, these are positioned in the puller's crossbeam. The bearing is then removed by tightening the puller's pressure spindle against the shaft on which the bearing is mounted. · Other technical specifications: Weight: 1.09 kg. · Packaging: L-Boxx mini Podpfx Ao Ab Izgei Togu Contents: 10-piece Spanning range: 20 - 95 mm

Condition: new, Ball bearing puller set 69, 7-piece. Spreading range: 35-120mm, KUKKO Pedps Ab Iztefx Ai Tjgu · Operating principle: Access is gained to the bearing rings. To do this, the ball cage must be destroyed. Then, the ball segments of the puller, which correspond to the balls of the bearing, are inserted between the inner and outer rings of the bearing and secured by rotating them 90º. After screwing the puller bolts of the puller device into the puller segments, they are positioned in the crossbar of the puller device. The bearing is then removed by tightening the pressure spindle of the puller device against the shaft on which the bearing is mounted. · Other technical features: Weight: 1.64 kg · Packaging: L-Boxx mini Spreading range: 35 - 120 mm Contents: 10-piece

Condition: new, Vacuum accessory set, 3-piece, NILFISK · Water · 3-piece set · DN 36 mm · For all vacuum cleaners, except safety vacuum cleaners Pedpfxe Ab Hv Ns Ai Tjgu · Consists of: Extension tube, stainless steel, 2 x 0.5 m, plastic special floor nozzle, 400 mm, plastic crevice nozzle, 300 mm.

Condition: new, Socket set 19 EMU-20, 23-piece, 1/2 inch, SW 8-32mm, 60 teeth, 6-point, GEDORE · 12.5 mm (1/2") square drive Contents: 1 lever-action reversible ratchet (60 teeth) with socket locking function and push-button release, 1 each of socket insert (design see table), SW 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 21 / 22 / 24 / 27 / 30 / 32 mm, 1 T-handle with sliding piece, 1 extension 125 / 250 mm, 1 universal joint. · Other technical features: Reversing angle: 6° Pgsdpfxj Ab Hpco Ai Teu Height: 55 mm Width: 277 mm Contents: 23-piece Length: 425 mm

Condition: new, Spiral hose set, ID 8mm, OD 12mm, L. 6m, connector DN 7.2, G 3/8 inch, Rl. RIEGLER Podpfs Ab Rqwox Ai Tsgu · Polyurethane · with rotatable connector and kink protection spring · extremely flexible and kink-resistant · operating temperature from -40 to +74 °C · max. operating pressure: 10 bar at 23 °C · The highly elastic polyurethane hose has a similar retraction force to the conventional nylon spiral hose, but is less prone to forming kinks and has a significantly higher abrasion resistance. This reduces the risk of scratching painted or sensitive surfaces. · Further technical characteristics: Temperature range: -20 to +60°C · Physical state: Gaseous Outer coil diameter: 80 mm Hose diameter: 12.0 x 8.0 mm Operating pressure: 9 bar Operating temperature: -40 to +74 °C Connection thread, inch: G 3/8 ? Connection thread, mm: 9.5 mm Working length: 6.0 m

Condition: new, Parallel shim set No. 6348P, contains 20 shims, size 100, precision, length 100 mm, AMF Pedpfxe Ab H Ils Ai Tsgu · = Precision shims in a wooden box · Case-hardened · Pairwise, finely ground for plan parallelism · Sets provide a range with 1 mm steps · Pair tolerance tp in height IT 5, nominal dimension tolerance in height ± 0.01 mm, remaining dimensions according to DIN ISO 2768m · Other technical characteristics: Contents: 20 pairs Length: 100 mm Set contents: 20 pairs

Condition: new, Barrier post set, PU, yellow/black, with hexagonal base, D63 x H1000mm, 6 posts and 5 chains · Consists of 6 barrier posts made of yellow polypropylene with 2 black stripes, H 1000 x Ø 63 mm · Eyelet at the post head · Hexagonal base 370 x 75 mm and 5 chains made of black polypropylene Contents: 6 posts and 5 chains Height: 1000 mm Weight: 4.2 kg Diameter: 63 mm Material: PU Color: yellow/black Design: with hexagonal base Pedpfo Acaxgjx Ai Togu

Condition: new, Set of 5 coconut/elastomer brushes, L. 600 mm, with 10 handles, L. 1400 mm, SOREX · Complete set for removing coarse dirt in indoor (coconut) and outdoor (elastomer, water-resistant) areas · Metal handle holder for easy handle attachment Material: 5 coconut/elastomer brushes Design: with 10 handles, L. 1400 mm Pjdpfxe Acatke Ai Tjgu Length: 600 mm

Condition: new, Packing table set B2000xT800xH2205mm, variant 1 * Sturdy table construction * Table legs powder-coated in gentian blue, RAL 5010 * Tabletop surface plastic-coated, light gray, RAL 7035 * Table stacking magazine with 8 retaining brackets for boxes Pgjdpfx As Aca E Tei Teu Surface load: 100 kg Plate thickness: 19 mm Depth: 800 mm Width: 2000 mm Design: Variant 1 Height: 2205 mm

Condition: new, Packing table set B2000xT800xH2205mm, structure variant 2 · Sturdy table construction · Table legs powder-coated in periwinkle blue, RAL 5010 · Tabletop surface plastic-coated in light gray, RAL 7035 · Table rack with 8 retaining clips for boxes Surface load: 100 kg Width: 2000 mm Design: Structure variant 2 Depth: 800 mm Tabletop thickness: 19 mm Height: 2205 mm Pedpfx As Aca Hdoi Tsgu

Condition: new, Complete set for the suction and pressure side, consisting of four individual parts. Pgjdpfj Abt N Nex Ai Tou

Condition: new, Complete set for the suction and pressure side, consisting of four individual parts. Pgjde Abt Rajpfx Ai Tju

Condition: new, compatible with HP 2.26 H Podo Abt R Hspfx Ai Tegu

Condition: used, Year of construction: 2003, functionality: fully functional, Used IDEAL BAS120 resistance butt welding machine for joining band saw blades, built in 2003 (serial no. 229981). It welds the blade and then anneals the seam on the same machine, so it fits a saw shop, a blade service workshop or an in-house sawmill maintenance department. The machine has an IDEAL UniOp control, which gives repeatable weld settings. Welding power is 45 kVA and the upsetting force is 20 kN. Model iDEAL BAS120 Year 2003 Control UniOp Power 4.5 kVA Voltage 415 V Frequency 50-60 Hz Pgsdpfx Ais Abzqbj Teu Max. Stauchkraft 20 kN Serial no. 229981

Year of construction: 2012, condition: used, Profiling line T8. The line has been used very little and is in excellent condition. Podpfx Aexdl Huoi Togu Specification: Manufacturer: Rollsett Made in: Finland Year: 2012 Produced profile: T8 Other: Automatic unloading table included in the set. Training and installation can be provided on request. If you have further questions, we will be happy to answer them.

Condition: excellent (used), functionality: fully functional, Velati VbA MISCELATORE LT2000 | Multi-component mixing and feeding line / Filling mixing installation Manufacturer: Velati VbA Model / Type: MISCELATORE LT2000 Serial number: 349/88 Power: 15 + 15 HP (two mixing motor drives) Power supply: 380 V, 50 Hz Internal dimensions of the mixing chamber: 1900 x 1050 x 500 mm Working capacity of the mixer: 2000 liters Overall dimensions of the entire installation: 5000 x 4800 x 3400 mm Set components: - Two-shaft paddle mixer Velati VbA MISCELATORE LT2000 - Screw conveyor (elevator / lifting screw) Screw width: 330 mm Pitch: 290 mm - Outfeed belt conveyor Plastic belt Belt width 500 mm Pgedpfs Ad Uzxex Ai Tou - Control cabinet / distribution panel: Rittal AE 1004 - Gearbox / reducer: Bonfiglioli Riduttori MRA0 50/33 The Velati VbA industrial mixing and feeding line with a capacity of 2000 liters is a comprehensive installation designed for continuous and batch preparation of mixtures in meat processing, delicatessen, and food processing plants. The set presented consists of three integrated modules: a high-capacity, two-shaft paddle mixer (MISCELATORE LT2000), a screw conveyor (lifting screw), and an outfeed belt conveyor with a plastic belt. The heart of the set is the large-size, two-shaft mixer with a 15 + 15 HP drive, which ensures fast, uniform, and gentle mixing of meat fillings, sausages, ready meals, or vegetables without damaging the structure of the raw material. By combining the mixer with a screw elevator and an outfeed belt conveyor, the installation creates an automated process flow: it enables efficient transport of the raw material, accurate mixing, and mechanical, efficient discharge of the finished product and transfer to subsequent stages (e.g., to filling machines, formers, or cooking kettles).