Used Rs-Simulatoren St2K320/70D for sale (6,560)

Condition: good (used), Distance between points 1000 mm Stitch height 230 mm Main motor power 9.2 Kw Working wheel dimensions (h x w x d x w) 500x80x203.2 mm Ø max to grind 460 mm Tailstock cone MORSE 4 MORSE 5 tailstock nose cone Max. Z-axis travel 1115 mm Njdpfx Agjtrgnzj Dewf Max. X-axis travel 260 mm Approx dimensions (length x width) 440x370 cm Approx. weight 4700 Kg

Condition: used, Year of construction: 1982, pressure 150 t throat 520 mm stroke 30 - 200 mm no. of strokes 15 - 60 /min distance table/ram, max. stroke up, adjustment up 650 mm table surface area 1600 x 1000 mm Nsdpfxovuudbo Ag Dswf hole in the table 1040 x 140 mm table height over floor 1000 mm passage to the back 1000 mm ram surface 1400 x 800 mm ram adjustment 120 mm power requirement 20,0 kW weight 27,5 t dimensions (WxDxH) 2,3 x 2,75 x 4,5 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, semi-automatic ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Year of construction: 2007, condition: used, Manufacturer: Solev (Clauger) Njdpfsx R Aq Tjx Ag Dewf Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Condition: ready for operation (used), functionality: limited functionality, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, table width: 1,250 mm, table length: 1,120 mm, spindle diameter: 100 mm, Placing a bid obligates you to collect the machine by the deadline of 28.01.2026! Prompt scheduling of an appointment is necessary after the end of the auction, as the machine has not yet been dismantled! TECHNICAL DETAILS Working spindle diameter: 100 mm Taper bore of working spindle: ISA steep taper No. 50 Drilling depth in one stroke: 710 mm Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Cross travel of the table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 - mm/rev Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase current Njdpfex Hfugsx Ag Dewf Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Electrical diagrams Operating manuals Note: Brake defective, clutch removed (included). Repair costs in Germany approx. €3,000.

Condition: not inspected (used), Year of construction: 2017, functionality: unexamined, input voltage: 72 V, type of cooling: water, No minimum price – guaranteed sale to the highest bidder! Set includes the following components: 2x inverter welding machines HighPULSE 552 RS 2x water cooling units WK-350 Special wire feeder DV-31 Twin + additional accessories (hose packages, torches) MACHINE DETAILS Nedpfx Ajyaqbkog Dowf Electrical data (welding unit) Current range: 20 A – 550 A Voltage range: 15 V – 41.5 V Mains voltage: 72 V Mains current: 35 A

Condition: as good as new (ex-display), Year of construction: 2022, 1550 mm 2,0 mm 1,5 mm Nodpexcuxdofx Ag Dowf roll diameter oben 90 mm 560 kg 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: good (used), Valve block, control block, hydraulic control block, control unit, hydraulic control -Manufacturer: Voith, control unit from Uldrian TSM 22-8 rotary transfer machine -Type: PWM4-A RS-332 REV.: 4 BIOS : P0097-01 -Number: 9x control unit available -Price per piece Nwjdpfsm Rk S Iox Ag Dof -Dimension: 150/135/H50 mm -Weight: 0.7 kg/pc.

Condition: used, Valve block, control block, hydraulic control block, control unit, hydraulic control -Manufacturer: Voith, control unit from Uldrian TSM 22-8 rotary transfer machine -Type: PWM4-A RS-332 REV.: 8 BIOS : P0159-01 -Number: 5x control unit available -Price per piece -Dimension: 150/135/H50 mm Njdpfx Ajm Rk T Njg Dswf -Weight: 0.5 kg/pc.

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DRN80M4/RS/TF/AL -Speed: 1435/24 rpm i= 58.60 -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm Nedpforanm Aex Ag Dewf -Protection rating: IP55 -Dimensions: 480/210/H170 mm -Weight: 22 kg

Condition: good (used), Sealing membrane, sealing tape, sealing film, roofing membrane, EPDM sealing membrane -Manufacturer: Phoenix, EPDM sealing membrane DIN 7864 Nwsdpfjiqu Rvsx Ag Def -Type: Resistit Perfect RS -Length: 10 m -Width: 250 mm -Thickness: 1.0 mm -Quantity: 5 rolls available -Price: per piece -Dimensions: Ø120 x 250 mm -Weight: 2.6 kg/piece

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DRS71M4/RS/TF/AL Nwodpfxora Rn No Ag Dsf -Speed: 1360/23 rpm i= 58.60 -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP55 -Quantity: 1x motor available -Price per piece -Dimensions: 510/135/H185 mm -Weight: 24 kg/pc.

Condition: new, roll diameter 51 mm Wheel width 350 mm weight 20 kg height adjustment 575 - 975 mm Load capacity per arm max. 700 kg Furnishing: - Safe workpiece support - by massive and heavy-duty galvanized steel rollers Nwodpfxsxaaivo Ag Dsf - Roller support steplessly height adjustable and clampable - Problem-free and efficient material transport for the supply and removal of workpieces techn. Details: - Load capacity, max. 700 kg - Standpipe diameter 74/52 mm

Condition: used, functionality: fully functional, – very good condition – Austrian-made TECHNICAL SPECIFICATIONS: – hopper dimensions: 120 cm x 100 cm – power: 2 x 11 kW – four shafts – shaft length: 400 mm – shaft diameter: 300 mm Nedjyabdcjpfx Ag Dswf – screen: Ø 30 mm – auto-reverse – dimensions (L/W/H): 140 / 130 / 200 cm – weight: 600 kg

Condition: used, Year of construction: 2015, Working condition reflow oven. Ask for additional information! Nedpfx Agex Tq I So Dewf

Condition: excellent (used), Door opening button, push button, door opener, automatic door sensor -Manufacturer: eao, Opening and presence detectors for railway interior doors, original packaging -Type: RS-1 Hitachi -Technology: Active Infrared Nsdpfjud Du Nex Ag Dswf Technical data: see photo -Transport dimensions: 200/140/H40 mm -Weight: 0.1 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1988, loading capacity: max. 3.000 Kg. table diameter: 1.600 mm strip metal width: max. 150 mm Nodpfxstzwxws Ag Dswf

Condition: used, mileage: 472 km, power: 375 kW (509.86 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGS 33.510 BB 6x4 CH chassis truck with first registration in 05/2025, 33t variant, 6x4 drive, wheelbase 3.30 m, 510 HP, with PTO, air conditioning, refrigerator, tow bar, gross combination weight 59 t, with ATS warranty, and much more. MAN ATS warranty valid until 25.09.2026 Commercial tonnage: 33 tons Permissible gross weight: 26,000 kg 28,000 kg permitted total vertical load, Tech. Plus Medium-high design TN long cab with one sleeper berth and rear wall window Diesel engine with 375 kW (510 HP) output and 2,600 Nm torque, Euro 6 D Drive: 6x4 Wheelbase: 3,300 mm, rear frame overhang 800 mm Differential locks in rear axles Transmission: MAN TipMatic 12.28 OD PTO, gearbox-dependent, type NH/4c, without flange, f=1.14, position approx. 2:30 High-performance engine brake MAN EVBec, adjustable Transmission function MAN EfficientRoll Transmission function rocking mode Transmission for increased thrust share during driving Transmission functionality MAN Idle Speed Driving Drive programs: MAN TipMatic Performance and Efficiency, up to 70,000 kg Drive programs: MAN TipMatic Offroad, up to 70,000 kg Drive program: MAN TipMatic Manoeuvre, shunting mode Creeper function MAN EasyStart Full brake assistant ABS, EBS, ASR, ESP Front and rear axles with leaf suspension Front axle: 9,500 kg, rear axle: 13,000 kg Stabilizer on front and rear axles Axle ratio i=3.63 Tow bar: ROCKINGER type 400 G 150A with pneumatic connections for trailer loads up to 40,000 kg Tech. Plus 59,000 kg permissible gross combination weight Tech. Plus Climatronic Cruise control Multifunction steering wheel Sun visor Roof hatch Nodpfsx Txwuex Ag Dswf 2 LED work lights behind cab roof 2 LED beacon lights on cab roof LED taillights and daytime running lights 2 LED marker lights and turn signals on the sides Preparation for reversing camera Extendable refrigerator in cab Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operating panel with 2 functions, operable from outside with door open Air-sprung and heated driver comfort seat with lumbar support and shoulder adjustment Comfort seat covers Smartphone integration MAN SoundSystem MAN Media System Advanced Navigation 7 inch New vehicle with MAN ATS warranty Net price plus 19% VAT. Attractive financing offers available on request. All details without guarantee. Subject to errors and prior sale. Internal vehicle number: 2509

Year of construction: 1979, condition: ready for operation (used), Max. grinding diameter: 300mm, Max. grinding length: 1950mm, Max. workpiece length: 2000mm Max Feed rate 1 – 30 m/min. Coolant supply 100 l/min Inf. variable speed range 2.000 – 6.000 RPM. Spindle 88 mm Centers height 150 mm Grinding wheels 100 – 250 mm Spindle power 3,5 kW Grinder Power 15 kW – 380 V – 50 Hz Nodpohq Uigjfx Ag Dswf

Condition: good (used), Year of construction: 2000, machine/vehicle number: M-0510-008-04/10-00, Unloader Schneider Senator RS SR0059, year of manufacture 2000, machine number M-0510-008-04/10-00, in good condition, available immediately If you are interested, we will be happy to inform you about other machines in our company. Nwjdpfxjtukkvo Ag Djf You are welcome to view the machines at our premises by prior appointment.

Year of construction: 2006, condition: excellent (used), Electric go-kart Year of manufacture: approx. 2006 Nedpfx Agoxvnhro Dowf

Condition: used, mileage: 38,500 km, power: 330 kW (448.67 HP), first registration: 02/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, navigation system, soot filter, Mercedes-Benz Actros 2545 6x2 Roll-off Tipper Meiller Tectrum RS 21 * German vehicle * Like new condition * Automatic transmission * Steerable trailing axle * Refrigerator * Adaptive cruise control * Emergency brake assist * Traffic sign recognition * Air conditioning * Navigation * Multifunction steering wheel * Differential lock * Retarder * Leaf/air suspension * Meiller Tectrum RS 21 body * Manual underrun protection * 40 mm towing hitch * ISO air connections with red and yellow coupling heads * DuoMatik air connection * 15-pin electrical socket * ABS connection Subject to prior sale and errors! Sale exclusively according to our terms and conditions. Nsdpfx Agexz Nm He Dewf Important notice - Important information: Despite careful verification of all details in our offer, errors may occur. These may partly result from transmission errors in the systems of various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal note: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and does not constitute warranted characteristics.

Condition: used, Year of construction: 1984, Technical details: grinding length: 500 mm grinding width: 250 mm workpiece height: 250 mm table surface area: 530 x 200 mm magnetic plate size: L:460 x B:150 x H:87 mm Njdpju Ngkyofx Ag Dowf table speed: 2 - 32 m/min table adjustment: Längsweg: 550 mm table adjustment: Querweg: 300 mm feed of spindle: 0,001 mm/Hub grinding spindle speed: 3.000 U/min dimensions of grinding wheel: max. Ø 250 x B:25; Bohung Ø 76 mm total power requirement: 4,3 kW weight of the machine ca.: 2,2 t dimension machine xH: 2,3 x 1,8 x 2,2 m dimensions of hydaulic: L: 500 x B: 480 x H: 680 mm dimension coolant device LxWxH: 0,65 x 0,45 x 0,8 m The machine is currently equipped with a grinding wheel Ø 240 x 22mm. On the table there is a permanent magnet plate with 30 induction fields, operated by a hand lever. Operation via swiveling control panel. no dressing device incl. oil collecting tank; grinding wheel holder and available documentation *

Condition: excellent (used), Here we offer you a Stäubli robot RS60 with CS8 C control. Stäubli robot RS60 with control CS8 C for demanding placement tasks. Payload: 2 kg Axles: 4 Description working range: 600 mm Nwodsfia I Ropfx Ag Dsf Inner radius: 166 mm Repeatability: +/- 0,01 WxHxD: 810x976x710 mm Weight: 70 kg Type: RS 60 / Control CS8 C condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: good (used), Keyboard, logistics module Nsdpfx Agob A Hfgs Dowf Manufacturer: Witron -TYPE: 12V DC RS 232 -MFT: 11 - VT -Weight: 3 kg

Condition: new, Year of construction: 2026, I am selling this industrial heavy-duty rip saw RS-ES-800 KUSING. The machine is in stock in Kežmarok (Slovakia). It is an industrial heavy-duty rip saw intended for processing soft and hard lumber of larger cross-sections with multiple blades. Technical parameters • Number of blades: up to 15pcs (+ 3pcs on the movable unit) • Motor power: 37 kW (standard), adjustable according to requirements • Machine weight: 3 500 kg • Pressure roller lift: Electric, controlled from external panel • Blade positioning: Electric, via computer • Number of feed rollers: 6 + 3 (upper and lower) • Front traction roller: Positioned in front of the wedges for rapid ripping • Extraction system: Upper and lower dust extraction for maximum cleanliness • Material width: 800 mm Multi-blade solution: - Possibility to install up to 15 blades + 3 movable blades. - Movable unit with a separate space for 3 blades, each 110 mm in length. Power: - Standard motor 37 kW (adjustable according to customer requirements). - Feed motor power 1.5 kW. Nodpjx Uty Tefx Ag Djwf Material feed: - A total of 9 feed rollers (6 + 3) ensures even advance and prevents torsion of the lumber during cutting. - Front traction roller placed in front of the wedges minimizes kickback and significantly facilitates feeding of boards or tall timbers. Electric control: - The lift of the pressure rollers and blade positioning are performed electronically via an external control panel, which increases the speed of setup during line ripping. Perfect dust extraction: - Integrated extraction systems in both upper and lower parts of the machine ensure maximum cleanliness of the workspace. Easy maintenance: - Special construction allows the top cover to be folded up, so maintenance and cleaning of the machine are quick and hassle-free. The specialty of this machine is the front traction roller, which is placed in front of the wedges against kickback—this speeds up feeding boards into the machine and especially helps when feeding tall timbers, as it is not necessary to overcome the resistance of the wedges and the machine pulls the material in by itself. Thanks to the three traction rollers, it is ensured that the material does not tend to twist during the cutting process, thereby increasing the quality of the cut. The machine has excellent dust extraction from both the upper and lower parts, which ensures maximum cleanliness of the machine. The machine is specially constructed to be as easy as possible to maintain and clean. The top cover folds open and allows the operator to easily clean the machine.