Used Rt-Pcr for sale (5,388)

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Ndedpex H Rmusfx Agrjb Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, This listing is for the Applied Biosystems ProFlex PCR Sytem The unit is in full working condition and is ready for immediate release. Ndodpfex Syrqox Agreb The Applied Biosystems ProFlex PCR System is a thermal cycler/performance PCR instrument designed for amplifying DNA through PCR — a core technique in molecular biology for cloning, sequencing, gene expression studies, genotyping, and other applications. It’s used in research, teaching, and clinical lab settings (research use only; not for diagnostic procedures)

Condition: used, This listing is for a Qiagen Qiagility PCR Prep System. The unit is in full working condition and is ready for immediate release. The Qiagen QIAgility Automated PCR Prep System provides users with a fully automated PCR setup, responsive software, and increased productivity. This compact, bench-top liquid handling robot eliminates the need for manual pipetting steps, with high precision and reproducibility. The Qiagen QIAgility uses Qiagen PCR kits and step-by-step guided software to automatically calculate all mixes and worktable set up so you won’t need to program pipetting steps. This PCR prep system uses a single-channel pipetting head with dynamic liquid level sensing and supports almost any kind of thermal cycler and lab ware. HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High-Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood. Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips. Njdpfx Aoxx Axqogredb Pipetting head: Single-channel Precision: CV

Condition: used, This listing is for the Qiagen Rotor-Gene Q (Parts Only) The Qiagen Rotor-Gene Q is a high-performance real-time PCR cycler known for its unique rotary design and precision thermal control, offering exceptional uniformity and optical performance. This specific configuration includes 2 optical channels (Green and Yellow), making it ideal for targeted applications such as gene expression, viral detection, and SNP genotyping. Ndsdpfx Agoxv A Awsreb Key Features Rotary Air Chamber Design: Ensures uniform thermal conditions and eliminates edge effects. 2 Optical Channels: Green and Yellow channels support common fluorophores such as FAM, HEX, and VIC. Rapid Cycling: Heating rate >15°C/s and cooling rate >20°C/s. High Sensitivity: Fast fluorescence acquisition (≤4 seconds

Condition: used, Year of construction: 2014, Technical details: length: 8.000 mm width: 1.600 mm height over floor: 980 mm Payload: 40 t axle distance: 980 track width: 550 mm weight: 9,5 t dimensions L x W x H: 13,3 x 2,5 x 2,65 m - Application for tractors - with corner supports - Trailer drawbar: length 1,300 mm; support height 1,400 mm; crank 600 mm; fastening with adjustment bolt Ø 72 x 90 mm - with solid rubber tires (2x double wheel rocker with 4 wheels) Ndodpeu Nv Tqofx Agrsb - technically possible driving speed 6 km/h i.D. *

Condition: used, Year of construction: 1988, Technical details: table diameter: 500 mm table height: 150 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 110 kg dimensions: 800 x 800 x 180 mm Rotary table operation by handwheel Operation Coupling connection Ø 20 x 32mm Foot mounting: 2x clamping groove Ø 19 x29mm Equipment: 8-sided top plate, size 665mmx23mm, 3x through-holes Ø 30mm in the centre Accessories: 4x eyebolts Ndjdpju N D I Aofx Agrob *

Condition: used, Technical details: table diameter: 450 mm table height: 160 mm rotation movement: 360 Grad passage: 40 mm weight of the machine approx.: 150 kg space requirements of the machine approx.: 650x600x170 mm basis stand area: 620x420mm T-slots : according to DIN 650 und 508 T-slots 8x radial, 4x163mm length and 4 x 135mm length - a=12mm - h=19mm - b=21mm - c=9mm * Njdpfx Asu Nkncsgredb

Condition: used, Technical details: table diameter: 300 mm table height: 250 mm Nsdpfeu Nknpsx Agrodb rotation movement: 360 Grad passage: 40 mm swivellable: einseitig 90° ° weight of the machine approx.: 126 kg dimensions LxWxH: 0,65 x 0,52 x 0,25 m basis stand area:380x330mm T-slots: according to DIN 650 und 508 T-slots 4x163mm length and 4x 135mm length - a=12mm - h=19mm - b=21mm - c=9mm *

Condition: used, Technical details: table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad Nsdpfeu N D Ayox Agrsdb weight of the machine approx.: 100 kg dimensions: L: 800 x B: 700 x H: 400 mm The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range T-slots according to DIN 650 radial Foot clamping 16mm (6 holes) *

Condition: used, Year of construction: 2013, operating hours: 10,000 h, Field of application: Construction Please contact Theo Lelie for more information Njdpjx Dmugefx Agredb Terex RT100 RT Rough Terrain Crane 4x4x4 Bj 2013 53 m Main Boom 90 ton / 3 m Cummins QSB 6.7 engine CE Declaration

Condition: used, Year of construction: 2017, operating hours: 704 h, 2017 | Wacker Neuson RT 82-SC3 | Used Tandem Roller | 704 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9100 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 30 inspection points 29 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall and operational condition. Nodpfxjy Ruius Agrjdb 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40162 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, This listing is for a Qiagen QIAgility PCR Prep System Nsdpfx Ajxzgxgogredb

Condition: used, This listing for a 1 of 2 BD Max PCR Machine BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification with built in extractor. PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample Electrical Requirements 100 to 240 V, 50/60 Hz, 10 A, 300 VA Max Dimensions: Weight 250 lb. Depth 28.5 in. Height Nsdpfxsxzgw Ae Agrjdb 37 in. Width 29.7 in.

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 411 mm, Tested forklift battery for your forklift - 48V 3PZS 375Ah - DIN A + 1-year warranty + Includes Aquamatik watering system + Includes end connectors & REMA 320 plug (other plug types can be installed on request) + Capacity: min. 90-100% (C5 capacity test protocol included with delivery) + Year of manufacture: 2024 Dimensions: Length: 827 mm Width: 411 mm Height: 625 mm Weight: approx. 560 kg Suitable for the following models and others: Linde E 16 - 386-00 Linde E 18 - 386-02 - side battery change Linde P 50 Z LONG - 368-00 Linde P 60 - Linde P 60 - side battery change Linde P 60 Z - 126-00 Linde P 80 - Linde P 80 - side battery change LInde T 30 R - 143-00 Linde W - side battery change Still LTX 70 Still R 06-06 Jungheinrich EZS 570 Crown RT 3000 Crown SC 1013 Crown SC 1016 Crown SC 3013 Crown SC 3210 Ndjdjy Rnlvjpfx Agrsb Crown SC 3210-1.3 Crown SC 5310-1.3 Crown SCT 6010 Nissan AS2N1L13Q OM-Pimespo-Fiat XE 12 Simai TE80IXB Common battery sizes available – please enquire. Transport available.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: XLWRT2835B1260727, gearing type: automatic, Year of construction: 2011, operating hours: 20,000 h, fuel tank capacity: 200 l, load capacity: 36,000 kg, TECHNICAL DETAILS Front axle Load capacity: 16,000 kg (at 20 km/h) Reduction ratio: 16.3:1 Rear axle Load capacity: 38,000 kg (at 20 km/h) Reduction ratio: 16.36:1 Fifth wheel coupling Type: 2-inch Ferodo cast steel plate Technical load capacity: 36,000 kg Lifting capacity: 35,000 kg Axle 1: left 12 mm, right 12 mm Axle 2: left 14 × 14 mm, right 14 × 14 mm MACHINE DETAILS Steering wheel diameter: 350 mm Turning circle across front bumper with wheelbase: 3,100 mm Driver's side: 13.190 m Passenger's side: 12.750 m with wheelbase: 3,200 mm Driver's side: 13.460 m Passenger's side: 13.020 m with wheelbase: 3,300 mm Driver's side: 13.730 m Passenger's side: 13.290 m with wheelbase: 3,500 mm Driver's side: 14.270 m Passenger's side: 13.830 m Hydraulic system Tank capacity: 105 dm³ Working pressure: 230 bar Lift cylinders: 2 units Ndjdpfx Asyilz Iegrsb Tank volume: 200 dm³ Electrical data On-board voltage: 24 V Alternator: 28 V Alternator output: 100 A Batteries: 2 x 12 V / 140 Ah Starter: 5.5 kW Cabin internal dimensions (L x W x H): 1,670 x 1,520 x 1,660 mm Transmission type: Automatic Operating hours: 20,000 h EQUIPMENT EC Declaration of Conformity Further vehicle details can be found in the attached data sheet.

Condition: used, machine/vehicle number: XLWRT223XB1580957, Year of construction: 2011, operating hours: 18,462 h, fuel type: diesel, Production country: NL Please contact Theo Lelie for more information Ndedpfxjy Aamvj Agrob

Condition: used, machine/vehicle number: XLWRT382XC2352389, Year of construction: 2012, fuel type: diesel, Production country: NL Please contact Theo Lelie for more information Terberg RT382 XLWRT382XC2352389 Bj 2012 36.307 hours (engine is checked) Cummins QSM11-C335 engine ZF 6WG-260 Gearbox GVW 60.000 kg GCW 190.000 kg Axle Load 1 20.000 kg Axle Load 2 45.000 kg Turntable load 45.000 kg 3.5 inch fifth wheel Nedpfx Aoyzzrqjgrsdb

Condition: used, Year of construction: 2013, operating hours: 28,529 h, fuel type: diesel, motor manufacturer: Mercedes, Production country: NL Nedpox Dmuyofx Agrodb Please contact Theo Lelie for more information

Condition: used, Year of construction: 2008, // Equipment dismantled and stored in our warehouse // Manufacturer: Larox / Pannevis (Larox B.V.) Model: RT®/FT 1.15 x 5.6 m Type: Vacuum belt filter Year: 2008 (1988 version refurbished) Application: Liquid/solid separation, with cake drying and filtrate recovery. FT = Fume-Tight> Materials: stainless steel Filter area: 6.4 m² Ndedsx R D D Iopfx Agrsb Cake cleaning: – Option to perform several washing stages, with each filtrate collected in its own receiver (purity up to 99.99% or more) with low washing water consumption. – Backwashing Repositioning of the tray and support grids at each retraction Operation/power supply: continuous Continuously washed filter cloth Cloth orientation and tensioner Extraction screw Skid with 3 filtration tanks and circulation pumps Vacuum pump skid: – Sihi Sterling LPHA 70123 (Atex) – Liquid ring: ethanol – 855 m³/h – 21.83 KW – Heat exchanger – Recirculation pump – Separator tank Main machine weight: 3000 kg Main machine length: 913 cm Full technical documentation (paper and digital versions) Electrical cabinet

Condition: ready for operation (used), Year of construction: 2005, operating hours: 28,246 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,600 mm, table load: 20,000 kg, overall weight: 28,000 kg, No reserve price – guaranteed sale to the highest bidder! Ndjdpfx Ajy R Dpkegrob TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 2,000 mm Z-axis travel: 1,600 mm B-axis: 360° C-axis: 360° Spindle taper: SK 50 Rotary table (L x W): 2,500 x 2,000 mm Table load capacity: 20,000 kg Tool magazine: 100 pcs. MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7,300 x 7,700 x 4,350 mm Machine weight: 28,000 kg Operating hours Operating hours: 75,377 h Spindle hours: 28,246 h EQUIPMENT H- / V- head

Condition: excellent (used), Hamilton FLOW PCR Setup Instrument The Hamilton FLOW PCR Setup Instrument is a benchtop robotic workstation for the fully automated preparation of PCR and qPCR reaction solutions. It is designed to minimize manual pipetting errors and increase sample throughput. It is typically used in conjunction with Roche Life Science products (such as the MagNA Pure 96 System and LightCycler® 480 Instrument) as part of the FLOW solution. Features and Specifications The Hamilton FLOW PCR Setup Instrument (PSU) is characterized by its precision and ability to be integrated into automated workflows. Automation: It automates the pipetting and dispensing of PCR components (samples, master mixes, primers) into 96- or 384-well PCR plates. Volume Range: The hardware is designed for aspiration and dispensing volumes up to 1 ml. Traceability: It features automatic barcode tracking on accessories and consumables to ensure complete sample traceability. Software Integration: The instrument uses FLOW software, which imports test requests from laboratory information management systems (LIMS) and reports results. The software also allows for user-friendly configuration of PCR setups. Flexibility: It can be used either as a standalone instrument for PCR setup or in a "FLOW Flex" configuration for combined primary sample handling and PCR preparation. Accessories: Optional accessories, such as cooling blocks for PCR plates, are available to maintain the integrity of temperature-sensitive reagents. Applications Experts from Hamilton and Roche point out that the instrument is suitable for a wide range of genomic applications: Nedoyk Uxnjpfx Agrsdb Gene expression analysis Genotyping Sequencing Detection of pathogens (e.g., SARS-CoV-2 tests) Clinical diagnostics Power supply: 115 V AC to 230 V AC (+/- 10%) Frequency: 50/60 Hz +/- 5% Power consumption: 600 VA Dimensions: 112.4 × 90.3 × 100.6 cm (W × H × D) Depth without automatic loading: 79.5 cm Weight: 180 kg Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: like new (used), set, packed in wooden box, screw and barrel for 150 mm extruder, grooved feeding bush, screw with shearing and mixing element Nsdpfsdm Aghsx Agrjdb

Condition: good (used), Year of construction: 2005, Ref. -No.: 10627 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2005 Type of control: CNC Control: Heidenhain 530 Storage location: Halbrstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 2000 mm Z-Travel: 1600 mm B-Axis: 360 ° C-Axis: 360 ° Spindle Taper: SK 50 Njdpfx Agey Ed R Doredb Rotary Table (Lxw): 2500 x 2000 mm Table Load: 20.000 kg Tool Piece Magazine With: 100 Pcs./pcs. Operating hours: 75.377 H Spindle hours: 28.246 H Machine length: 7300 mm Machine width: 7700 mm Machine Height: 4350 mm Weight Of The Machine Ca.: 28 t Further information: - with H / V head Machine can be viewed under power by arrangement

Condition: excellent (used), Year of construction: 1988, Magnet table 1.800 x 450mm, cross travel 580mm. New CNC Fagor 8037M 2018. Paper filter with magnet separator Nsdpfetqt Idex Agredb

Year of construction: 2016, condition: ready for operation (used), travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3s JOBS THORA RT Bed Type Milling Machine manufactured in 2016 features a robust table measuring 1,200 mm by 1,200 mm, accommodating workpieces up to 5,000 kg. With a spindle speed of 5,000 rpm and a tool magazine capacity of 40 tools, it offers efficient milling capabilities. Consider the opportunity to buy this JOBS THORA RT Bed Type Milling Machine. Contact us for further details. • Table Nedpfjyla S Nox Agrjdb • Length: 1,200 mm • Width: 1,200 mm • Surface: Tapped holes • Maximum workpiece dimensions (L × W × H): 1,600 × 1,600 × 950 mm • Workpiece capacity • Maximum workpiece weight: 5,000 kg • Spindle • Torque (continuous/10 min): 637 Nm • Tooling • Tool magazine capacity: 40 tools Technical Specification Taper Size ISO 50