Used Ruhstrat Transformator for sale (750)

Year of construction: 2007, condition: good (used), Oil-filled transformers, cast resin transformers, transformer substations, repair shop. 250 transformers immediately available from stock. Lhsdedrn Svopfx Altsk 50 kVA to 63 MVA. 6 – 110 kV.

Year of construction: 2007, condition: good (used), Oil-filled transformers, cast-resin transformers, transformer substations, repair shop Lhedpsdrn Smsfx Altjk 250 transformers available immediately from stock 50 kVA to 63 MVA 6 - 110 kV

Year of construction: 1990, condition: refurbished (used), Our Best Sellers! Extremely dynamic short circuit protection, therefore excellently suited for rugged industrial use with high Schalthaeufigkeiten, electrical loads and harmonic components. Stable boiler. Reduced losses (Po / Pk between BA 'and A-C'). Available with outer-cone Elastimold Steckdurchfuehrungen, of course, also with HV / LV-sided porcelain execution. Transformer is always equipped with a dial thermometer with two contacts and pointer, with optional transformer DGPT2 full protection. Ausdehnerversion with 2-float Buchholz relay possible. Lhedpfx As A Nbvsltjk Delivery to a series of 35 QUANTITY devices. 12 months warranty.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2838 664, type of input current: AC, overall weight: 4,710 kg, input voltage: 16,800 V, total height: 1,820 mm, total width: 1,270 mm, total length: 1,920 mm, nominal power (apparent): 2,000 kVA, secondary voltage: 420 V, protection type (IP code): IP54, temperature: 40 °C, space requirement width: 1,270 mm, space requirement length: 1,920 mm, space requirement height: 1,820 mm, Equipment: type plate available, Three-phase oil transformer according to IEC 60076, hermetically sealed design suitable for ambient temperatures from -25°C to 40°C and maximum installation altitude of 1,000 m above sea level, for outdoor installation, with aluminium windings, routine test according to IEC60076, in accordance with Regulation (EU) No. 548/2014 of 21.05.14 Stage 2, valid from 01.07.2021. Lhodpfx Ajynhwroltek

Condition: new, Year of construction: 2024, Manufacturer: Green Transfo Type: Minera MP Year of construction: 2024, unused Available units: 9 units Rated power: 7000 kVA Rated voltage: 30 / 0.72 kV The transformers are being sold due to an incorrect order. It was subsequently discovered that 33 kV transformers were required – the offered models only provide 30 kV each. Therefore, they are now for sale. Condition: Unused, fully functional, technically perfect Lhodpfx Aevx Tmijltok

Condition: new, Year of construction: 2021, functionality: fully functional, type of input current: AC, overall weight: 100 kg, input voltage: 380 V, input frequency: 50 Hz, total height: 200 mm, total width: 300 mm, total length: 300 mm, nominal power (apparent): 20 kVA, secondary voltage: 44 V, temperature: 100 °C, input current: 55 A, type of output current: AC, output voltage: 44 V, Equipment: type plate available, New - 3 transformers. Ledpfxsx D Uw As Altjhk 380/400/415V to 44V(460A)

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 28461, overall weight: 3,860 kg, input frequency: 50 Hz, nominal power (apparent): 1,000 kVA, Equipment: type plate available, For sale: EMIT 1000kVA Transformer Type: TA0o1000/15, serial no. 28461 50Hz HV 15,750V ±5% - 2x5%; LV 400/231V; Short-circuit voltage 5.34%; No-load losses 2080W; Load losses 11,090W; Lodpfxeyt Er Do Altjhk Total weight 3860kg; 50 Hz; active part 2200kg; oil 940kg; Current 3; Duty type C; Standard PN69/E06040 S1min Net price 12,000 EUR Price negotiable

Condition: used, Year of construction: 1980, functionality: fully functional, overall weight: 3,730 kg, input frequency: 50 Hz, nominal power (apparent): 1,000 kVA, Equipment: type plate available, For sale: 1000kVA Transformer BEZ BRATISLAVA CZECHOSLOVAKIA Type a T0394/22 50Hz 15750±5%; 400/231V; 36.66A; 1444A Oil 840kg Total weight 3730kg S1min Lhsdpfx Aljyt El Rjtsk Net price: €12,000 Price negotiable

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, overall weight: 2,330 kg, input voltage: 11,000 V, input frequency: 50 Hz, nominal power (apparent): 630 kVA, secondary voltage: 400 V, empty load weight: 2,330 kg, type of output current: three-phase, output voltage: 400 V, Equipment: documentation/manual, type plate available, For sale: 1 new 11/0.4KV 630KVA transformer with small oil volume. Ljdpfxeyph Sle Altshk

Condition: new, Year of construction: 2007, machine/vehicle number: 54748, type of input current: three-phase, overall weight: 864 kg, input frequency: 50 Hz, nominal power (apparent): 2,200 kVA, power: 2,200 kW (2,991.16 HP), Manufacturer: Zennaro Costruzioni Elettriche, Marghera (Venice), Italy Rated Capacity: 2,200 kVA, 3‑phase, 50 Hz Cooling: Mineral oil, approx. 654 kg Vector Group: Δ/Y (common configuration) Lhsdpfx Asw U Rzgsltek Year: 2007 Condition: Never used

Condition: new, Year of construction: 2007, input frequency: 50 Hz, nominal power (apparent): 2,200 kVA, empty load weight: 864 kg, We own 9 never used step up transformers that we want to sell. They are located in Italy in a warehouse. Manufacturer: Zennaro Costruzioni Elettriche, Marghera (Venice), Italy Rated Capacity: 2,200 kVA, 3‑phase, 50 Hz Lsdpsw U Sh Uefx Altjhk Cooling: Mineral oil, approx. 864 kg Year: 2007 Condition: Never used Please advise if there is interest on your side. The photos are attached.

Condition: new, Year of construction: 2007, We own 9 never used step up transformers that we want to sell. They are located in Italy in a warehouse. Manufacturer: Zennaro Costruzioni Elettriche, Marghera (Venice), Italy Rated Capacity: 2,200 kVA, 3‑phase, 50 Hz Cooling: Mineral oil, approx. 864 kg Year: 2007 Condition: Never used Please advise if there is interest on your side. The photos are attached. Lhjdpfjw U Silox Altjk

Condition: new, Manufacturer: SBA TrafoTech GmbH Type: DS-UL-G140 Device type: Three-phase autotransformer Frequency: 50–60 Hz Protection class: I Degree of protection: IP23 Insulation class: B/F Maximum ambient temperature: 40 °C Lhsdezcgy Ispfx Altsk Design: UL-compliant transformer series DS-UL-G140

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Lhedpfx Aljzul Utjtjk Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,267 h, functionality: fully functional, turning length: 180 mm, turning diameter: 100 mm, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, TECHNICAL DETAILS Turning diameter: 190 mm Turning length: 180 mm Max. turning diameter: 100 mm Travel X-axis: 125 mm Travel Z-axis: 195 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Spindle bore: 43 mm Spindle bearing diameter: 80 mm Spindle speed range: 60–6,000 rpm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Lhedpfx Alszul T Njtsk Number of tool positions: 10 MACHINE DETAILS Transformer: 400 V / 200 V Data interface: V.24 / RS-232-C Operating hours: 27,267 h EQUIPMENT Bar feeder Integrated CNC control Space-saving, compact design Inductively hardened flat guideways for bed and carriage Continuously variable AC main spindle drive Constant cutting speed programming Integrated cold light Ammeter for main spindle drive Swiveling central control panel Controls for automatic, manual, and CNC programming modes Three-phase servo motors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and spray nozzle Electric 10-position turret system, MORI SEIKI Automatic turret indexing logic Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Front sliding door with large viewing window Electrical connection for chip conveyor, prepared Electrical equipment according to VDE 0113 Attached control cabinet Freestanding transformer

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Lhedezul Tvopfx Altek Swinging diameter: 510 mm Machining diameter: 420 mm Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 145 mm, turning diameter: 168 mm, travel distance X-axis: 130 mm, travel distance Y-axis: 110 mm, controller model: FANUC 31i-TA, TECHNICAL DETAILS Turning diameter: 168 mm Turning length: 145 mm X-axis travel: 130 mm Z-axis travel: 110 mm Spindle speed: 45–6,000 rpm MACHINE DETAILS Control system: FANUC 31i-TA EQUIPMENT 2 × Portal clamping system 2 × Part chute for inspected parts 2 × 3-jaw chuck, SMW Autoblok, Type BHM 165, 152.4 mm (6 inches) SMW Autoblok hydraulic cylinder, Type SIN-S 100, left SMW Autoblok hydraulic cylinder, Type VNK 70/37, right Chip conveyor, discharging to the rear of the machine Air-controlled part clamping monitoring, right Part clamping monitoring, on both sides 4-position spindle orientation, on both sides Coolant injection in the chuck via Deublin rotary distributor, on both sides Automatic coolant pump with 200 l tank capacity 2 × 8-station turret Signal light with traffic light design Preparation for oil mist extraction Automatic machine shutdown Automatic central lubrication RS-232-C interface Lhodpszul Rujfx Altek External transformer 10 × Boring bar holders 3 × Turning tool holders, right 3 × Turning tool holders, left Customer macro B Turning cycles

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, working width: 1,650 mm, wire diameter (max.): 7 mm, Schlatter MG930, quick change, DC welding machine with 5 DC transformer, 1092 kVA. Schlatter control from 2007 with S7-300 PLC. Automatic line wire loader up to 3m, automatic line wire channel positioning, open portal DC welding machine, quick change cross wire hopper, MLV1 pullout and stacker. Lhjdpfezd Sulex Altsk

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Lsdpfx Aoxaqa Ssltohk Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: Ledpfxjzn Aymo Altjhk B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: used, Year of construction: 2013, 2013 SMC Group Routech Accord 30FX CNC machining center, high performance multi-function work table, 400V, 3 phase, X-axis 20' 10", Y-axis 5' 4.7", dual machining heads, rotation speed 6-18,000 RPM, onboard Rapid 12-tool changer, Rapid 16 rear tool changer, work table, pod, and rail, gantry type, has SMC Group CNC control with remote pendant control, 480V, 3 phase, Becker, model 271407, rotary vane vacuum pump, and (1) Texa, model SAW50RBSBCC000, chilling unit with transformer, winning bidder responsible for proper removal. Lhjdpoxdc T Sofx Altsk

Condition: used, Year of construction: 1988, x-travel 870 mm y-travel 370 mm z-travel 400 mm table-size 310 x 1370 mm distance vertical spindle / table 50 - 450 mm feed - longitudinal/cross 20 - 800 mm/min 9 - 355 mm/min rapid traverse longitudinal and cross 3000 / 1375 mm/min spindle taper SK 50 spindle turning speed range 40 - 1750 U/min spindle speed: 12 Stück total power requirement 5,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system Lhodpoxlkw Usfx Altek - Pivoting machine light - Splash guard tray - Separate transformer

Condition: new, input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, temperature: 75 °C, total length: 1,500 mm, total width: 1,300 mm, total height: 2,250 mm, overall weight: 230 kg, control type: PLC-controlled, actuation type: electric, fuel type: electric, Airplan – Modular Drying Kit for Containers – For Drying Lumber, Pallets, and Firewood Airplan is the easiest and most cost-effective way to dry wood, pallets, or firewood. It is a ready-to-install kit designed to be mounted inside a container (adapted to our supplied drawing), with a capacity of up to 15-20 cubic meters and a length of 6 meters for wood stacks. Main components: - 2 or 3 industrial axial fans for controlled air circulation - Electric heating element kit for reliable heat supply - 2 automatic dampers to optimize air exchange and humidity control - Electrical control panel with drying software interface and all necessary power/control connections - Water spray pipe and nozzles Lodexnbctopfx Altshk Key benefits: - Transform a standard container into a drying kiln - Minimum capital expenditure – buy only the essentials, not a complete prefabricated kiln - Reduced transport costs thanks to the compact kit format - Fast, straightforward installation and user-friendly operation - Professional-grade components and top-quality materials for long service life - Precise drying control suitable for lumber and pallet production What we provide: Complete Airplan kit (components listed above) Structural drawing and installation guidelines Basic start-up assistance and commissioning instructions Next steps / Contact: For a quote, technical details (electrical requirements, power ratings), and the structural drawing, please contact us with your desired drying capacity and the intended enclosure dimensions. We will tailor the configuration and provide a detailed offer.

Condition: used, Year of construction: 2006, FANUC ROBOCUT ALPHA- OiC WIRE ERODING MACHINE YEAR: 2006 X STROKE: 320.0mm RAPID: 900mm/min Y STROKE: 220.0mm RAPID: 900mm/min Z STROKE: 255.0mm RAPID: 900mm/min U STROKE: 120.0mm RAPID: 450mm/min Lhjdpfjzv En Ajx Altok V STROKE: 120.0mm RAPID: 450mm/min MAX. TABLE WEIGHT: 500.0 kgs COMPLETE WITH.... CHILLER SYSTEM COOLANT FILTRATION SYSTEM TRANSFORMER RENISHAW MACHINE MANUALS

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Manufacturer: Norweld, drying oven with isolation transformer Lhodpoyuvp Ajfx Altsk -Type: ES 2 -Usable space: Ø 100 x 430 mm -Number: 2x drying ovens available -Price: per piece -Transport dimensions: 520/230/H560 mm -Weight: 14 kg/pc.