Used Sac Ts 145 for sale (5,760)

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,211 h, maximum speed: 40 km/h, Operating hours: 1,211, First registration: 11.10.2022 Basic Equipment / Technical Data: - Max. lifting capacity: 4,200 kg - Max. lift height: 7,000 mm - Max. outreach: 3,800 mm - Length to implement carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine: - 4-cylinder Deutz TCD 3.6 - 3.6 l displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR-catalyst with AdBlue injection (DPF + DOC + SCR) Drive: - Hydrostatic travel drive - Pump: electronically controlled with variable output - Engine: variable displacement motor - EPD TOP incl. optional automatic rpm increase - Mineral-based hydraulic oil HVI 46 Transmission: - 2-speed, electrohydraulically controlled - Max speed: 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: - Enclosed cab - Split door - 360° all-round visibility - V3611 GRAMMER air-suspended seat with lap safety belt - ROPS/FOPS certified - Heating - Front, roof, and rear wipers - Sunblind - 4x1 electronic joystick with capacitive release incl. direction control switch - CS = hydropneumatic cab suspension Boom: - 2-piece telescopic boom with electronic end position damping, Soft Stop - Implement carrier quick coupler system type "ZM2", hydraulically controlled from the cab Steering: - Hydraulic steering Dujdstu Sztopfx Ad Njt - 3 steering modes: All-wheel, front-wheel, crab steer - Permanent all-wheel drive - Axles: fixed front axle, oscillating rear axle Brakes: - Power-assisted disc brakes on all four drive shafts - Parking brake automatically engages when engine is off Chassis: - High-strength steel frame construction Hydraulics: - Load Sensing variable displacement pump - Work hydraulics flow: 150 l/min - Hydraulic fan flow: 46 l/min - Total flow: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics: - 12 V - 100 Ah battery - 120 A alternator Stabilization Control: - Simplified Merlo ASCS System (ASCS-light) with fully electronic stability control, audiovisual signals, attachment recognition, and overload cut-off Tires: - 460/70 R 24 Michelin XMCL Standard Equipment: - Power brakes - Hydraulic oil cooler - Rear plate for mounting a trailer hitch - Hydraulic reversing fan - Radio prep - Work lights on cab (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Load guard on implement carrier - Road lighting - Automatic main battery switch - Electrical cable in boom - Audible reverse signal - Lift cylinder support for securing Optional Equipment: - EU approval as tractor/towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. connection for trailer lighting (for compact and medium models, height-adjustable version strongly recommended) - Air conditioning - Boom suspension (B.S.S.) - LED beacon on cab roof (approval subject to ...

Condition: excellent (used), Year of construction: 2022, operating hours: 4,800 h, functionality: fully functional, cutting force: 1,300 t, power: 550 kW (747.79 HP), empty load weight: 220,000 kg, total width: 8,500 mm, total length: 22,000 mm, total height: 6,800 mm, overall weight: 220,000 kg, cutting length (max.): 1,000 mm, year of last overhaul: 2026, operating pressure: 360 bar, Lefort 1300 TS Scrap Shear – Very Good Condition – Available We offer for sale a Lefort 1300 TS scrap shear in very good working condition, with a complete technical follow-up. The machine has been maintained under a service contract with LEFORT, ensuring regular maintenance and a full service history. All technical documentation and machine records are available. Main specifications Cutting force: 1300 tons Cutting width: 1000 mm Max cutting height: 700 mm Production capacity: 35–45 tons/hour Compression box length: 8000 mm Lid force: 2 x 400 tons Pusher force: 180 tons Power unit 5 electric motors – 110 kW each Rexroth variable displacement high-pressure pumps Working pressure: approx. 360 bar Equipment Centralized automatic lubrication system Automatic or manual operating modes Wireless remote control IFM PLC with control display High-capacity hydraulic cooling system Remote diagnostic modem Dujdpfx Adsytz U Ue Nst A reliable and powerful machine, ideal for scrap processing and recycling operations. 📍 Machine can be inspected in operation 📄 Full technical information available upon request

Condition: excellent (used), mileage: 474,277 km, power: 162 kW (220.26 HP), first registration: 08/2002, fuel type: diesel, tire size: 275/80 R22,5, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: other, total length: 8,600 mm, total width: 2,600 mm, total height: 3,800 mm, loading space length: 6,380 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Year of construction: 2002, Equipment: ABS, airbag, cruise control, electric window regulation, power assisted steering, tail-lift, = Additional options and accessories = Djdoyt Nfnspfx Ad Njut - Spare wheel = Remarks = TRANSPORT TO ANTWERP 590 EURO Refrigeration unit brand: Thermo King = Further information = Tyre size: 275/80 R22.5 Brakes: Disc brakes Front axle: Steered; Suspension: Parabolic springs Rear axle: Twin tyres; Suspension: Air suspension Unladen weight: 9,580 kg Technical condition: very good Visual condition: very good Reference number: 8

Condition: new, weight max. in kg 2500 kg fork length 1150 mm stroke height 115 mm 200x50 mm 80x70 mm 600 mm 1230 mm Dodoyv Nlbspfx Ad Nsut length in total 1555 mm length in width 540 mm 540 mm turning radius 1275 mm weight 86 kg Lift truck with rubber rollers

Condition: refurbished (used), Year of construction: 2002, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Completely overhauled in 2026 • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle Morse taper 4 • Infinitely variable speed adjustment • Stepless quill feed • Thread cutting device • Two 18 mm T-slots each on the machine base at rear and left • Machine lamp • Central lubrication • Table surface machined all around • Safety guard on drill • Coolant system Dimensions and Travel Tool holder: MT 4 Column diameter: 195 mm Table dimensions: 1200 x 750 mm Number of T-slots: 5 T-slot spacing: 125 mm Quill stroke: 220 mm Column stroke: 450 mm Distance, spindle nose — min. 40 mm to top of table: max. 710 mm Distance, spindle nose — min. 840 mm to base plate: max. 1510 mm Drilling radius: min. 540 mm max. 1590 mm Work table height: 900 mm Machining Data Drilling capacity (solid): St 60 up to Ø 45 mm GG 22 up to Ø 55 mm Tapping: St 60 up to M36 GG 22 up to M45 Main Spindle Drive AC motor, frequency-controlled Power: 5.5 kW at 100% duty cycle Duedpfx Asyv A Ucod Not Speed range: 15 – 2800 rpm Torque: up to 250 Nm, constant across 15 – 200 rpm Feed Drives Infinitely variable feed: 0.02 – 0.7 mm/rev Feed force: 12,000 N Electrical Data Operating voltage / freq.: 400 V / 50 Hz Control voltage: 24 V Total connected load: 9.3 kVA Weight DANUFLEX 145 (without packaging) With 750 x 1200 mm table: 2600 kg Documentation Operating manual, including Lubrication and hydraulic diagram Electrical schematic

Condition: used, functionality: fully functional, Year of construction: 1980, Used 3 meter guillotine shear by Haco Model: Toolmaster 36 Capacity: 3100 x 6 mm Adjustable backgauge Dedsytb Inepfx Ad Nsut Year of manufacture: 1980

Condition: used, functionality: fully functional, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, HACO 3000x6mm hydraulic guillotine shear TS-3006 Brand: HACO Model: TS-3006 Power: Three-phase 380V Cutting length: 3,050 mm Duedpowx Ix Sefx Ad Net Cutting thickness: 6 mm Type: Vertical cut, motorized blade angle adjustment (0.5 to 3º) Back gauge: 750 mm (motorized with manual handwheel for fine adjustment) Manual blade gap adjustment via lever at the rear Weight: 4,500 kg Motor: 7.5 kW

Condition: used, functionality: fully functional, Year of construction: 2000, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Capacity: 6 mm Dedpoxgdlnsfx Ad Neut Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 2,500 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 26,100 W, total height: 2,083 mm, total width: 1,971 mm, overall weight: 8,800 kg, controller manufacturer: FANUC, controller model: 18-TA, product length (max.): 4,191 mm, number of axes: 2, Horizontal CNC lathe with tailstock manufactured in 2004. This Takisawa TS-35 features a maximum turning diameter of approximately 400 mm and a turning length of 1000 mm. It is equipped with a powerful 26.1 kW main spindle motor and a chuck size of 304 mm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-35 machine we have for sale. Contact us for further details. Djdpfx Aeyt Rtgsd Nout • Distance between centers: 1000 mm • Swing over bed: approx. 400 mm • Maximum turning diameter: approx. 350–400 mm • Maximum turning length: 1000 mm • Spindle: • Chuck size: 304 mm • Spindle bore / bar capacity: approx. 104 mm • Turret/tooling: • Number of stations: 10 • Boring bar capacity: approx. 40–50 mm • Tailstock: Manual quill for long shaft support Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2008, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 4,200 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 60 mm, main saw diameter: 250 mm, Used vertical panel saw for sale. The machine is in daily use and can be inspected in operation. Several saw blades will be included. Djdjygv Dwjpfx Ad Njut

Condition: used, Double-head cutting-off machine – Tekna TK 154 Technical specifications: Blade: Ø 500 mm Maximum cutting length: 4000 mm Duedpfx Adjxbr Itj Not Blade tilt: outward Tilt angle: 90°/22.5 kW Voltage: 380 V Power: 7 HP Dimensions: 5200 x 1650 x H 1700 mm (max 2100 mm) Weight: 1260 kg

Condition: good (used), Drill, drill press, pillar drill, pillar drill -Table size: 275 x 215 mm -Spindle mount: MK3 -Projection: 280 mm -Speeds: 200-1450 rpm -Columns: Ø 120 mm -Spindle stroke: 100 mm -Translation via: Gears -Number: 1x drilling machines available -Price per piece Duodpekw H D Rofx Ad Njt -Dimensions: 360/600/H1945 mm -Weight: 230kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, input current: 230 A, Equipment: freezer, lighting, AHT Miami 145 (U) Freezer - with freezing and cooling functions. Condition: Like new (ex-display unit). Dimensions: 145cm x 85.4cm x 83.3cm Refrigerant: R290 Freezing: -18°C to -23°C Lighting: LED Shipping costs depend on weight, volume, and, above all, distance. The following information is important for inquiries: delivery address (postal code and city name). However, further details require a phone call. Therefore, please inquire about shipping costs and other delivery methods by contacting us by phone. Our contact details can be found in the seller's legal information. Cash on delivery. We sell and export worldwide. Thanks to our extensive warehouse capacity, we can also deliver larger quantities flexibly and quickly. Dujdpfx Ajyu Skcsd Nst Please contact us before purchasing. We issue intra-community invoices - excluding VAT. Opening Hours Mon-Fri: 8:00 AM - 4:00 PM Sat: closed

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, Djdpfel Dw D Eex Ad Njut by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: excellent (used), Precision milling machine with 2 motors and 4 spindle speeds Dujdpfx Ajyti Dqed Njt

Condition: ready for operation (used), Year of construction: 2000, number of axes: 4, This 4-axis Weeke Optimat BP 145 was manufactured in 2000. A robust CNC processing center, it offers advanced capabilities for precise and efficient machining. Ideal for those looking to enhance their production with a reliable used machine. Contact us for more information. Duedpfx Adex D D T Hs Not

Condition: new, Year of construction: 2025, We offer a new table blasting machine – high-quality Czech production, made using premium materials. Model – TS 330/1. - Diameter of rotary table – 1000 mm. - Maximum height of blasted part – 550 mm. - Overall machine height – 2750 mm. - 1 blasting wheel – power input – 5.5 kW. - Bucket elevator – power input – 0.75 kW. - Table rotation – power input – 0.75 kW - Total machine power input – 7 kW. We also manufacture table blast machines with table diameter – 1500 mm. Equipment with frequency inverter – regulating the rotation speed of the blasting wheel. A major advantage of the machine is the ability to change the turbine’s rotation direction to right or left. Dsdpfxswt T Uzs Ad Nout Blasting equipment comes with CE certification. Further advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, thanks to its design, this table blast machine can be considered highly advanced. (Sandblaster, sand blasting, shot blasting, sandblasting machine, blasting machine, blast cleaner). Blast machine.

Condition: used, Year of construction: 1990, spindle diameter 150 mm Duedpsyqtf Tofx Ad Net x-travel 4000 mm y-travel 3000 mm z-travel 1000 mm w-travel 1500 mm Table area 2000x2000 mm Table load 30 t Feed 3-3500 mm/min Rapid movement 5000 mm/min transmission ratio 2 spindle power 37 kW total power requirement Heidenhain kW voltage 380 V frequency 50 Hz type ITNC mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2018, condition: used, functionality: fully functional, We are offering a WiHA recirculating air refrigerated display case in XXL format as a freestanding unit, 230V version. Description: Recirculating air snack counter with a recessed refrigerated well for cooling. Open on the customer side with air curtain and sneeze guard, square glass structure made of insulated glass. The snack counter is equipped with 6 individually illuminated and height-adjustable glass shelves. The recessed cooling area is ideal for beverages. Commercial appliance intended for use in indoor settings (canteens, break rooms, petrol stations, kiosks, school facilities, trade show presentations). Perfect for promoting and presenting your products (salads, delicatessen, snacks, dairy products, sandwiches, and much more). RRP €14,000 net: You will receive an invoice with VAT shown separately. Shipping of this display case is possible by arrangement. Our used equipment service for you: - 6-month warranty on all electrical components (limited to replacement of defective parts, excluding labor) - High-quality branded equipment at fair prices - Professional overhaul/inspection & expert cleaning - Tested & fully functional - or your money back - Flexible shipping or collection options - Competent advice before and after purchase - Provision of user manuals, wiring diagrams & spare parts - Safety testing according to DGUV V3 Dimensions: Snack counter (freestanding unit): W x D x H: 145cm x 73cm x 210.5cm, with lighting Base frame: W x D x H: 145cm x 73cm x 10cm Glass shelf area: W x D: 68cm x 37cm, 6 shelves with lighting, height-adjustable Recessed area: W x D: 136cm x 50cm, shelves removable Technical data: See photo. Condition: Used Shipping: Delivery or collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Dedpfx Adew U Tcaj Nout Do you have questions, require consultation, or would like to inspect the unit on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2001, condition: used, Erichsen Universal Sheet and Strip Testing Machine Model 145-60 Condition: Used Duodeyr R Uhjpfx Ad Njt Year of manufacture: 2001 Technical Specifications Hydraulic drive Motor power max.: 11.5 kW / 1500 rpm Pump output (small pump circuit): 12.3 dm³/min Pump output (large pump circuit): 31 dm³/min Test cylinder Punching force: 665 kN / 160 bar Hydraulic test head opening Max. operating pressure: 95 bar Holding pressure: 50 bar Drawing force ranges, switchable Small drawing force range: 37 kN / 10 bar Medium drawing force range: 225 kN / 60 bar Large drawing force range: 600 kN / 160 bar Max. drawing stroke: 150 mm Max. drawing speed: 750 mm/min Drawing ram stroke display: Resolution 0.1 mm Electrical connection values Power supply: 400 V three-phase, 50 Hz Fuses: 25 AT and 35 AT Ambient operating temperature: between +5° and +50° C Dimensions, weight Dimensions (L/W/H): 1800 mm / 1320 mm / 1400 mm Net weight: approx. 2400 kg

Condition: used, mileage: 88,727 km, power: 106 kW (144.12 HP), first registration: 02/2023, fuel type: diesel, overall weight: 1,102 kg, color: grey, gearing type: mechanical, Permissible total weight: 1102 kg Djdpeyt Uawsfx Ad Nout

Condition: used, Year of construction: 2002, sheet width 3000 mm plate thickness 6 mm distance between columns 3200 mm speed . m/min rear stop 1000 mm total power requirement 7,5 kW The backgauge is electric. The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to sale; our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Djdpjyqwbrsfx Ad Njut

Condition: good (used), Several measuring probes from Heidenhain are available for sale. - Manufacturer: Heidenhain Dodshlafnepfx Ad Njut - Type: TS110 / TS111 untested = €450 each TS110 / TS111 tested = €750 each TS220 / TS230 = €950 each ! Since several probes are for sale, please specify the desired type! - Holder: SK50

Condition: new, Year of construction: 2024, working width: 1,500 mm, sheet thickness steel (max.): 20 mm, Hydraulic guillotine shear – built-to-order machine (delivery time approx. 10–14 weeks) – including foot switch, touchscreen, rear installation area with light barrier monitoring, automatic/electric cutting gap adjustment, automatic/electric cutting angle adjustment, hydraulic hold-down, motorized backgauge up to 1000 mm depth - Images similar - Djdpfx Adeynatlj Nsut

Condition: new, Year of construction: 2025, working width: 3,000 mm, sheet thickness (max.): 10 mm, Hydraulic guillotine shear – made to order (delivery time approx. 10–14 weeks) – includes foot pedal, touchscreen, rear operating area with light curtain monitoring, automatic/electric blade gap adjustment, automatic/electric cutting angle adjustment, hydraulic hold-down, motorized backgauge up to 1000 mm depth -Images similar- Dsdeym Uv Espfx Ad Neut