Used Scantool 75 - 2000 for sale (14,520)

Condition: excellent (used), Clamping plate made of cast iron Length 2000 mm Width 315 mm Height 90 mm T-slot width 32 mm T-slot spacing 150 mm Diameter of the 12/8 fixing holes 27 mm Solid material Kdodpfx Aged Tcz So Asu

Condition: excellent (used), Year of construction: 2013, - Content: 68 + 7 HL Kjdpfx Aeq Uk Rlog Aedu - With vibrating beak - 3 side elevation of the hopper - Lifting frame, max. lift: 1000 mm - Max. discharge height: 2150 mm - Machine only very little used - In very good condition Dimensions : - Hopper length : 4740 mm - Width : 2200 mm - Dump height : 1440 mm

Condition: excellent (used), Gearboxes, spur gears, bevel gears, worm gears Kodpop Udh Ijfx Ag Aodu -Condition: very good, unused, original packaging -Manufacturer: Chiaravalli, worm gear type CHM 75 B14 -Translation: i = 15 -Hollow shaft: Ø 28 x 120/60mm -Cardboard dimensions: 200/160/H240 mm -Weight: 8.5 kg

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING Ksdpsz Dnr Refx Ag Ajdu SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: repair required (used), Year of construction: 2018, machine/vehicle number: 1713613, temperature: 650 °C, overall weight: 1,900 kg, EXW – Dismantling and loading must be arranged by the buyer! MACHINE DETAILS Voltage supply: 3/N/PE 400/230 V AC, 50 Hz Rated current: 125 A Rated heating current: 104 A Kdedpfx Agezx S Ems Aou Heating power: max. 72 kW Motor power: 3 kW Total power: 75 kW Dimensions & Weight External dimensions [mm]: 2,200 × 3,300 × 1,800 / 3,150 with lifting unit External dimensions with lifting unit: 3,150 mm Internal dimensions: 2,000 × 1,000 × 1,000 mm Weight: 1,900 kg Maximum temperature: 650 °C Protection class: IP40 EQUIPMENT Operating manual CE/conformity documents Note: One burner row is defective. Electrical repair is required.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Very robust lathe with a rigid machine bed. L + Z hollow spindle lathe Manufacturer: Grutzpe Model: 2000 / 500 Super AT Turning diameter: 1000 mm Distance between centers: 530 mm Hollow spindle diameter: 140 mm Distance between centers above the compound slide: 530 mm Turning length: 2000 mm Bed width: 420 mm Kodpfez D Dt Dsx Ag Aodu Chuck diameter: 315 mm Bridge Dimensions: 6500 x 2200 x 2000 mm Weight: 10,000 kg Accessories: Various Further details: see images

Condition: new, Year of construction: 2026, faceplate diameter 2000 mm swing diameter 2500 mm turning height 1600 mm control Fanuc 0i-D stroke of vertical slide 1000 mm tool holder 1 distance face plate/tool carrier 1075 - 1875 mm Kdedezzd Ryepfx Ag Aou vertical adjustment of the crossrail 800 mm workpiece weight 13 t faceplate turning speed range -stepless- 1 - 200 U/min feeds mm/min rapid traverse 10/12 m/min weight of the machine ca. 42 t This machine is a new machine with (C) or without milling spindle. It will be sold with full service and warranty by Wirths GmbH (Price without live tooling). Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.

Condition: used, Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 6193, type of input current: three-phase, Complete recycling plant available for sale, comprising a Lindner Micromat 2000 industrial shredder together with Godswill baling equipment, conveyors, control systems and associated plant. This is a substantial industrial recycling setup, previously used for processing waste paper/cardboard and producing compact, baled material. The plant is being offered as a complete package and represents an excellent opportunity for a recycling operator looking to acquire a ready-made processing system. Main equipment includes: * Lindner Micromat 2000 industrial shredder * Manufactured in 2015 Kodpfsz Eh Ihsx Ag Aodu * Machine No. 6193 * Motor power 132 kW * 400V / 50Hz * Manufactured in Austria * Godswill GB-1108F baling press * Manufactured 2009 * Series No. 982472 * 40 HP * 415V / 50Hz * 72A * Additional Godswill paper machinery/baling equipment, with a machine rated at approximately 80 HP * Hydraulic systems and associated equipment * Feed and discharge conveyors * Electrical control panels and operator controls * Safety/emergency-stop systems * Material handling and associated ducting/extraction equipment * Complete interconnected plant infrastructure as shown in photographs The machinery has all paperwork from new and installation. Low hours. All services completed and Documented. Ideal for: Waste paper and cardboard recycling • Material recovery facilities • Recycling companies • Waste processing operations • Industrial baling and shredding applications Sold as a complete plant/package.

Condition: used, Universal external and internal cylindrical grinding machine CINCINNATI - MSO, Type R75 Serial No. 27782, Year of manufacture 1976 Center distance max. 805 mm Workpiece grinding length max. 800 mm Center height 130 mm Swinging diameter max. 250 mm Workpiece grinding diameter max. 250 mm Workpiece weight between centers max. 75 kg Workpiece weight in chuck max. 20 kg Workpiece spindle speed 50 - 390 rpm Tailstock internal taper MK 5 Tailstock short taper flange DIN 55027, Size 5, Ø 82 mm Tailstock spindle bore 38 mm Headstock internal taper MK 3 Grinding wheel diameter max. 300 mm Grinding wheel width max. 40 mm Grinding wheel peripheral speed 30 m/sec Tailstock quick traverse 50 mm Automatic tailstock feed 0.005 to 0.03 mm Manual feed 0.0025 mm Hydraulic table movement 0.05 - 6 m/min Motor power grinding spindle 3 kW Motor power workpiece spindle 0.75 kW Motor power internal grinding attachment 0.75 kW Power connection 380 Volt, 50 Hz - Feed and plunge system, manual or automatic feed - Grinding spindle swivels +/- 90° - Workpiece spindle swivels 0 to 90° - Table tilt for taper grinding up to 10° - Counter support / quill for the workpiece spindle with internal taper MK 3 - Internal grinding spindle missing, internal grinding attachment for swiveling - Coolant system adjacent - 1 diamond grinding wheel dresser - 3 grinding wheels with grinding wheel arbors - 1 grinding wheel without grinding wheel arbor - 1 grinding wheel puller - 1 reducing sleeve - 3 centering pins - Several drive dogs - Operating manual with electrical diagram Space requirement L x W x H 2350 x 2000 x 1600 mm Weight 2500 kg Kdjdpfxjz Ek Sis Ag Aou Good condition

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Kdsdez D U D Tepfx Ag Aou Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: ready for operation (used), Year of construction: 2000, SAMSYS MUS 2000 / Bar Feeder Magazine -CE marking -Year of manufacture 2000 -Country of origin: Switzerland -Bar diameter: 5 - 80 mm Kedpfx Aoz Eqwxog Aodu -Bar length: 250 - 1550 mm -Longitudinal movement: 600 mm -Height adjustment: 775 - 1175 mm Dimensions: L x W x H 2.2 x 1.1 x 1.7 meters / Weight 500 kg Subject to errors and omissions.

Condition: used, Year of construction: 2004, turning diameter 620 mm turning length 2000 mm control MSX 501 total power requirement 30 kW Kdjdpfx Agsz Icunj Aeu

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in perfect working order and operates without any issues. It can be tested upon request. Kdjdpfoz Iiifjx Ag Aou

Condition: excellent (used), Year of construction: 2010, 1,0 ST. gebr. Spritzgiessmaschine Hersteller: NETSTAL Typ: EVOS3500-2000 Baujahr: 2010 Schließkraft: 350 Tonnen Holmabstand: 730 x 730 mm Schneckendurchmesser: 70 mm Kedpfx Aez Iy N Asg Ajdu Spritzteilgewicht: 916 g/PS Ausstattung: Kernzüge 3 x DS / 2 x AS Schnittstelle Roboter

Condition: like new (used), Year of construction: 2015, functionality: fully functional, input voltage: 220 V, total length: 1,000 mm, total width: 1,000 mm, total height: 2,000 mm, compressed air connection: 6 bar, overall weight: 150 kg, type of cooling: air, Equipment: documentation/manual, balloon printing machine with a capacity of approximately 1,250 pieces per hour, capable of printing on one or two sides in a single color; the machine is ready for immediate use and can be collected in Dronten, the Netherlands. Kedpsz E Imkofx Ag Aodu

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg CX 75 - 4 + L – 2018 Year of Manufacture : 2018 Impression Count : 55 mio imp. 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: • PRINECT PRESS CENTER • EASYCONTROL (Color Measurement System) • AUTOPLATE (automatic plate change) • SPEED : 15.000 Sheets Per Hour • COATING UNIT with chambered doctor blade and Anilox Roller • High Pile Delivery • Infra-Red Dryer Kedpfx Aez E N A Tog Ajdu • Preset Feeder & Delivery (automatic Size Setting) • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders • Antistatic Device • Pneumatic compressor • Weko AP 262 Powder Spray • Air Cooled machine • Can print up to 0,8 mm This machine is in excellent condition and is available immediately. It can be seen running in one Print Shop in Germany

Condition: reconditioned (used), We manufacture the original. We offer you a used, workshop-reconditioned Kodpeh S U Ryefx Ag Ajdu granulator GA75 / 9 for sale. - Motor power: 75 kW, new motor - 9 rows of rotor knives, 4 stator knives - new rotor with completely new bearings and new, hardened wear parts. Inquiries only from commercial businesses!

Condition: used, functionality: fully functional, machine/vehicle number: 2199, mileage: 629,947 km, power: 368 kW (500.34 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 7,390 kg, overall weight: 18,000 kg, tire size: 315/80/22.5, tire condition: 70 %, axle configuration: 4x2, wheelbase: 3,650 mm, fuel: diesel, fuel tank capacity: 400 l, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, Year of construction: 2001, Equipment: ABS, AdBlue, additional headlights, air conditioning, car registration, cruise control, differential lock, electric window regulation, fog lights, hydraulics, low noise, non-smoking vehicle, onboard computer, power assisted steering, power mirror, retarder, seat heater, soot filter, tachograph, F 2000 19.414, leaf spring suspension at the front, air suspension at the rear, ZF manual gearbox (synchronizer rings for 3rd and 7th gear worn), tilting hydraulics, AP rear axle, tires: 2 x 80%, 4 x 70%, German vehicle, first owner. For sale only to commercial businesses and with the exclusion of any warranty. Ksdpoz Nlq Aefx Ag Asdu We deliver to any German seaport.

Condition: excellent (used), mileage: 522,907 km, power: 268 kW (364.38 HP), first registration: 11/2000, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 3, Year of construction: 2000, Equipment: ABS, crane, = Additional options and accessories = - 3 chairs - Beacon(s) - Lift Axle - PTO - Radio/CD player - Steering Axle - Toolbox = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ Meter capacity: 10,60 m Capacity kilo: 6560 kg = More information = Number of doors: 2 Cab: single Front axle: Steering Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension GVW: 28.000 kg Crane: PALFINGER, year of manufacture 2000, behind the cab Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Kdsdpjznd Dgsfx Ag Aou Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,800 kg, color: blue, operation weight: 1,800 kg, empty load weight: 1,800 kg, Year of construction: 2003, Beach cleaning trailer: - Kässbohrer Kedpfovnmg Uex Ag Aedu - BeachTech STR 2000 - Year of manufacture 2003 - PTO drive (540 rpm) - Working width 185 cm - Feeler wheels - 543 cm x 230 cm x 210 cm - Empty weight: 1,800 kg; permissible gross weight: 2,800 kg - Area performance: 22,200 m³/h - 30 cm max. working depth - 1.5 m³ collection container can be tilted backwards - Rake / sieve - Smoother - Working speed 12 km/h - Required tractor: 70 HP Receive all newly listed vehicles by email - sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: new, Lifting capacity 2000 Kg Magnetic field 350 x 150 mm weight 70 Kg Kedsvblgmspfx Ag Ajdu

Condition: good (used), Year of construction: 1994, - Hourly output: Up to 2,000 cartons - With NORDSON hot melt device - Machine in good condition Kdjdpfxewifwas Ag Aou

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 230 kg, temperature: 140 °C, The MH-8P 180/2000 model is ideal for medium-sized and large industrial facilities where cleanliness is a top priority. The hot water cleaner is also successfully used in transportation companies, auto repair shops, and agriculture. It is also popular with private customers who value the highest cleaning quality. Hot water cleaners are particularly recommended for areas with grease or oil contamination. Water temperatures above 70°C enable dirt removal up to five times faster than cold water cleaners! Kdjdpfjwqw Tpsx Ag Aou Technical Specifications: Model: MH-8P 180/2000 Manufacturer: NILFISK Condition: Display Unit Year of Manufacture: 2016 Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 2000 Operating Pressure (bar): 180 Maximum Pressure (bar): 250 Maximum Water Temperature (°C): 70–140 Connected Load (kW): 12 Power Cable (m): 5 Fuel Tank (l): 32 Chemical Tanks (l): 15+10 Weight (kg): 230 Dimensions (L x W x H) (mm): 1190 x 702 x 1020 Equipment: High-Pressure Gun: Nilfisk Ergo 3000 – 250 bar – 150 °C High-pressure hose: Nilfisk Longlife DN10 – 500 bar – 155 °C Spray lance: Nilfisk Tornado 1120 mm – 300 bar with pressure regulation Nozzle: Flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt-removing power. External control panel: Wired Schneider Electric remote control for controlling machine functions without having to go to the machine. Key features: The easily accessible water filter protects the pump from impurities in the water. Water softening system protects the heating coil from limescale deposits. Convenient handles on the housing + integrated nozzle storage Open oil system – no operating time limit Two integrated chemical tanks allow the cleaning fluid to be dosed directly via the machine. Easy-to-read and intuitive control panel The simple design and easy access to the individual components under the housing make the machine user-friendly and easy to maintain.

Condition: used, functionality: fully functional, empty load weight: 550 kg, maximum load weight: 1,450 kg, overall weight: 2,000 kg, first registration: 05/1992, loading space length: 3,970 mm, loading space width: 1,960 mm, loading space height: 400 mm, Year of construction: 1992, Open box trailer: + Buhl + Type: VA 2000-400AP + First registration: 27.05.1992 + Aluminum side walls – can be opened on 3 sides + Internal dimensions: 397cm x 196cm x 40cm + Loading height: 74cm + Tandem axle + Spare wheel + 7-pin plug + Wooden floor Ksdpswu Spyjfx Ag Ajdu + Unladen weight: 550kg; permissible total weight: 2,000kg + Support load: 50kg + Overall dimensions: 536cm x 208cm x 114cm (LxWxH) + Trailer from 1st owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted; subject to prior sale!

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 343.0 mm/sek grinding width 530 Plantisch mm table height 475 - 1240 mm total power requirement 3.0 kW weight of the machine ca. 100 kg range L-W-H 500 x 1010 x 1000 mm Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop Kdsdpfx Agsxaaq To Aeu - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction