Used Schleicher Rms 8/53/96-320 for sale (40,791)

Condition: used, mileage: 582,000 km, power: 390 kW (530.25 HP), first registration: 01/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MERCEDES-BENZ ACTROS 1853 GIGASPACE – STAND-ALONE AIR CONDITIONING – ALCOA – ALUMINUM WHEELS – TV – FULL CAB TRIM – ----VEHICLE HISTORY – VEHICLE, 1ST OWNER – VERY WELL-MAINTAINED VEHICLE – EXTENSIVE MAINTENANCE AND SERVICE HISTORY AVAILABLE – REGULAR INSPECTIONS EVERY 50,000 KM – VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT – GIGASPACE CAB – AUTOMATIC TRANSMISSION – RETARDER – CRUISE CONTROL – DISTANCE CONTROL – LANE KEEPING ASSISTANT – BLIND SPOT ASSISTANT – ACTIVE BRAKE ASSIST – STAND-ALONE AIR CONDITIONING – STAND-ALONE HEATER – AIR CONDITIONING SYSTEM – FULL CAB TRIM – ALCOA ALUMINUM WHEELS – LEATHER SEAT (DRIVER’S SIDE) – XENON HEADLIGHTS – AUXILIARY DRIVE – NAVIGATION SYSTEM – HANDS-FREE SYSTEM – ON-BOARD COMPUTER – REFRIGERATOR – 2 BUNKS – COMFORT SEATS – HEATED SEATS – TV / TELEVISION – FULL AIR SUSPENSION – 2 TANKS – ADBLUE MAINTENANCE & SERVICE – MAJOR INSPECTIONS PERFORMED REGULARLY – ENGINE OIL AND FILTER REPLACED – OIL PAN REPLACED – GEAR OIL AND REAR AXLE OIL REPLACED – BOTH NOX SENSORS REPLACED Hodpfszn Ekhox Adzer – STEERING PUMP REPLACED – STEERING SPINDLE AND UNIVERSAL JOINT REPLACED – ALL AIR SPRINGS OF THE REAR AXLE REPLACED – SHOCK ABSORBERS, SPRING STRUTS, AND BUSHINGS OF THE REAR AXLE REPLACED – KINGPIN REPLACED – ADBLUE FILTER REPLACED – COOLANT REPLACED – TECHNICAL INSPECTION PERFORMED – EXTENSIVE WEAR PARTS ALREADY REPLACED ADDITIONAL INFORMATION – MILEAGE: 582,000 KM – TIRE SIZE FRONT: 385/55 R22.5 MICHELIN – TIRE SIZE REAR: 295/60 R22.5 – TIRES IN GOOD CONDITION – TECHNICAL INSPECTION + SAFETY INSPECTION + §57B TACHOGRAPH VALID UNTIL 04/29/2026 – UVV + AU + TÜV VALID UNTIL 12/2025 – TECHNICAL INSPECTION VALID UNTIL 06/2026 – VEHICLE IMMEDIATELY AVAILABLE – VEHICLE IMMEDIATELY READY FOR USE ---- EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 EXPORT REGISTRATION EXW POSSIBLE IN 10 MINUTES (AUTHORIZED EXPORTER). VEHICLE RESERVATIONS ONLY ACCEPTED IN WRITING. VERBAL AGREEMENTS ARE NON-BINDING. SUBJECT TO CHANGES, ERRORS, AND PRIOR SALE. LEGAL NOTICE THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER WITHIN THE MEANING OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB). IT SERVES SOLELY AS A BASIS FOR NEGOTIATIONS. ALL INFORMATION IS PROVIDED WITHOUT WARRANTY. NO GUARANTEED PROPERTIES. SALE IS EXCLUSIVELY SUBJECT TO OUR TERMS AND CONDITIONS.

Condition: used, Schulz roller conveyor 90°-580-530 IR795 RA1244 Technical data: Manufacturer: Schulz Angle: 90° Useful width (NUB): 530 mm Nominal/outside width (NB): 580 mm Inner radius (IR): 795 mm Drive: centered Conveyor speed: v = 0.30 m/s Rollers: Type: G6/50 plain bearing with conical plastic molded part Transport weight: 85 kg Hodpfx Ask Aa N Rsdzor Scope of delivery: without supports and side guides (please enquire if required) optional Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, mileage: 20,000 km, first registration: 07/2026, fuel type: diesel, fuel: diesel, gearing type: automatic, suspension: steel, We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Additional information: Leasing/financing and trade-in possible! Subject to errors and prior sale! All information provided without guarantee. Hedszpfruopfx Adzsr

Condition: excellent (used), AVAILABLE FOR ONE WEEK ONLY – 2 × LOOS INDUSTRIAL STEAM BOILERS For sale are two complete LOOS industrial steam boilers, equipped with Weishaupt burners and Siemens Simatic control systems. Technical Data Per Boiler * Manufacturer: LOOS * Year of manufacture: 1994 * Steam capacity: 3,200 kg/h * Thermal output: 2,087 kW * Maximum operating pressure: 10 bar * Water capacity: 3,890 litres * Maximum operating temperature: 183 °C * Burner: Weishaupt RL40/2-A multiflam * Burner year: 2013 * Control system: Siemens Simatic * Quantity available: 2 units The boilers are offered as complete industrial units, including burners, control cabinets, safety equipment and installed accessories visible in the photographs. Suitable for industrial applications requiring process steam, including food production, laundries, manufacturing plants, chemical processing and other steam-consuming facilities. IMPORTANT: THESE BOILERS ARE AVAILABLE FOR ONE WEEK ONLY The equipment must be reserved within this limited period. After one week, availability can no longer be guaranteed. The boilers can be purchased individually or together. Inspection can be arranged by appointment. Assistance with dismantling, loading and international transport can also be provided. Serious enquiries only. Márton Pauker Top Heating Systems Hedpfx Adezqyv Rszjr

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured using a self-supporting aluminum structure with corresponding reinforcements in the lower belt for exceptionally high stability and strength. Subframe made of aluminum, 140 mm frame height (max. 39 tons), axles and suspension: disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering mechanism, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting assist (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, mounted on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg). Kingpin Aluminum landing gears, manufacturer: Alu-Leg, 2 x 10 ton support load, swivel feet for air suspension. Braking System According to E.E.G. standards, two-line braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Hsdpfxsy U Syre Adzjr Electrical System According to STVZO guidelines, with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpins, 1 LED work spotlight inside at the front left, operated from the outside. Body/Tipping Body - Body fully welded inside Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt, plank profiles fully welded inside! Floor as a sliding floor system mounted on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design, special aluminum corner profiles in a tapered design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 4 swivel locking rods, mounted in the welded aluminum rear frame in Teflon and stainless steel bearings, running aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar lining" for complete discharge, lateral brush seal and additional Kevlar lining on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24 plank system - smooth design! Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, or without hydraulic hoses. Accessories PVC mud flaps w

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Subframe made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering system, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting aid (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Kingpin Aluminum landing legs, manufacturer: Alu-Leg, 2 x 10 tons support load, for air suspension, we use swivel feet. Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1x 15-pole and 2x 7-pole socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside at the front left, operable from the outside. Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system installed on 140 mm aluminum crossmembers, floor load approx. 7 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 swivel rod locks, mounted in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, a following aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar tarpaulin" for complete discharge, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside on the left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24-plank system - smooth design Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, without hydraulic hoses. Hodpogcw Rijfx Adzjr Accessories PVC fenders wi

Condition: excellent (used), Crane control, controller, safety control, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, auxiliary switch block, auxiliary switch, contactor, solid-state contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor Hsdpfxezmupws Adzsr -Manufacturer: DEMAG, Schütz reversing Schütz, unused, original packaging -Type: DSW 3TF 8133 -Item No.: 87535044 -Cardboard dimensions: 165/105/H75 mm -Weight: 0.5 kg

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Hedjyb Nc Njpfx Adzsr Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Hodpfx Adeyb D Dbozsr Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: used, mileage: 201,600 km, power: 265 kW (360.30 HP), first registration: 02/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, color: white, gearing type: automatic, emission class: euro6, total length: 10,400 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 7,100 mm, loading space width: 2,490 mm, loading space height: 850 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, tail-lift, * Special equipment: platform body by Schwarzmüller * Crane by PALFINGER, type PK 18002 EH * Radio remote control * 3 hydraulic extensions * Tail lift by PALFINGER, 1.5 t, 2 m aluminum platform * Axle load, front axle: 8.0 t * Audio navigation system with Bluetooth, comfort features * Exhaust pipe pointing downwards on the right * Battery: 220 Ah * Compressed air connection in the cab * Air horn * Electrical pre-wiring in the cab 24V / 100 A * Cab: steel-sprung, comfort * Gearbox lock for auxiliary drive * Reinforced engine brake * High-Performance Engine Brake * Auxiliary drive MB 124-10c * PSM special module * Switch for tail lift * Circuit breaker * Driver's seat: comfort suspension seat * External sun visor * Steel rims 11.75x22.5 (on front axle) * Tires: 385/65R22.5 10/10 mm * Tires, rear axle: 315/80R22.5 10/10 and 10/10 mm * Tires, trailing axle: 315/80R22.5 10/9 mm * Additional 24V socket in the co-driver's footwell * Preparation for reversing camera * Oil cooler for gearbox * Emission standard: EURO 6C * Axle configuration: 6x2 * Trailer brake: 2-line, connections on the left * Trailer socket: 24V / 15-pole * Trailer coupling with 40 mm pin * Trailer load: 30,100 kg with continuous braking system, with center axle trailer: 14,600 kg * Antos model series * Exterior mirrors: electrically adjustable and heated * Differential lock, rear axle * Cab: width 2.30 m * Cab: hydraulic tilting mechanism * Cab: M ClassicSpace * Cab variant: ClassicSpace * External storage compartment on the left * Cab floor with engine tunnel 320 mm * Cab: cab height 420 mm * Suspension: air / air (full air suspension) * Electric windows * Tinted windshield * Generator: 100 A * Gearbox: 12-speed - type: G 211-12 * Power Shift transmission * (AdBlue): 60 liters * Manual lift roof (steel) * Comfort locking system * Fuel tank: 290 liters, aluminum * Lifting mechanism for trailing axle * Air intake from the front * Engine: 10.7 liters - 265 kW R6 diesel (OM 470) * Disc brakes on front and rear axles Hodpfx Aezpb S Dedzor * Co-driver's functional seat * Splash guard in the front * Stabilizer, front axle * Additional stabilizer, rear axle / trailing axle * 24V socket in the cab * Tachograph / EC control unit * Aerodynamically shaped underbody fairing * Underrun protection in the front * Preparation for toll collection system * Permissible total weight: 26.00 t * Subject to errors, prior sale and modifications.

Condition: new, Year of construction: 2026, Hydraulic Guillotine Shears Hydraulic guillotine shears are advanced machines designed for precise cutting of sheet metal with various thicknesses and hardness levels. Thanks to the use of a hydraulic drive system, they provide high cutting force, enabling efficient processing of even the most demanding materials. The robust construction and modern control systems ensure accuracy, repeatability, and safe operation. These machines are indispensable equipment in industrial plants and workshops involved in metal processing. Technical Specifications Max. sheet thickness (S235): up to 8.0 mm Maximum cutting length: 3200 mm Cutting angle: 1.5° Number of strokes per minute: 10–15 Back gauge travel: 600 mm Motor power: 11 kW Length: 4300 mm Width: 2000 mm Height: 2100 mm Weight: 7800 kg Equipment Motorized rear back gauge (driven by ball screws) Hydraulic sheet metal clamps along the entire cutting length Blade gap adjustment Ball transfer guides on the worktable Working area illumination Front support arms Mobile foot pedal controller Hydraulic Guillotine Shears NC 8x3200 ESTUN E21S Control System Control: Precise positioning of the rear back gauge Program memory: Ability to save up to 40 programs, each with a maximum of 25 steps Retract function: Automatic back gauge retraction after cutting Parameter saving: One-button saving of settings Data protection: Retention of parameters in case of power failure Hsdpfx Adjych Iaozsr

Condition: used, Mobile assembly platform, Workmaster, podium ladder, platform staircase ZARGES type Z-53796 Aluminum ladder, access ladder Year of manufacture: 2016 Platform height: approx. 45 / 73 / 1000 mm Platform size: 1700 x 600 mm - 3 steps + podium - Aluminum construction - Foldable staircase with 200 mm deep steps and non-slip surface - Platform with non-slip surface - Movable on swivel casters, 4 swivel casters with locking mechanism - Lowering device on the stringer as a central brake - Assembly platform foldable, can be disassembled for transport Hsdpfx Adsznrquszer Space required L / W / H: 2600 x 740 x 1940 mm Transport dimensions L / W / H: 2000 x 950 x 670 mm Weight: 54 kg Very good condition, like new

Condition: ready for operation (used), Wagner 752-LT/EP30 polarity reversal unit / power module, part number 350615, serial number: 538236A, used, in good condition, 100% functional, scope of supply as shown in the photos. Hsdpfxezm D Eno Adzsr

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), axle configuration: 4x4, fuel: diesel, color: red, gearing type: semi-automatic, emission class: euro6, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our portfolio of new vehicles, we offer: TLF 4000 All-wheel drive on an off-road MAN TGM 18.320 all-wheel chassis Our Water Buffalo on MAN Hardly any terrain is too difficult for it. Calm and powerful, it reliably delivers its load to the destination. At the incident site, it demonstrates its full capabilities—transporting crew, equipment, and sufficient extinguishing agents to the scene, supported by a high-performance pump. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) • Automated transmission • Off-road tires • Single wide tires matched to track width for maximum off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA mounts in the crew compartment Hedpfx Aexzu Ehsdzor Superstructure: • High-quality frame-style superstructure made from stainless and corrosion-resistant materials • Folding steps for each side-mounted equipment compartment • Individually customised stainless steel equipment storage solutions • Walkable, non-slip vehicle roof Vehicle pump / Extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP & ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • Water tank 5,000 l with integrated 500 l foam agent tank • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure rapid intervention reel with 50 m rigid hose • Roof-mounted foam/water monitor, 2,000 l/min • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W PA system with announcement unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED scene lighting on the superstructure and additional spotlight • Pneumatic LED light mast with remote control • Hygiene board available on request We would be happy to provide you with a detailed offer and present the vehicle to you at our site in Berlin. All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement constitutes information and is not a binding offer. Subject to prior sale!

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, tail-lift, trailer coupling, From our range of new vehicles, we offer: All-wheel drive Equipment Transport Vehicle GW-L on off-road capable MAN TGM 18.320 chassis Our robust powerhouse for heavy loads. Its superior off-road capabilities ensure reliable performance even in tough conditions. Suitable for operations such as severe weather response, setting up water supplies, as a modular rescue or equipment vehicle—also available with winch—or as an auxiliary tanker (TLF) with water tanks. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW), automated transmission • Super single tires, matched track width, for maximum off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Cab with auxiliary heater Body: • High-quality bodywork made from rust- and corrosion-resistant materials • Two spacious side equipment compartments • Fold-out steps for each lateral equipment compartment • Customizable stainless steel equipment racks tailored to your requirements Tail Lift: • BÄR tail lift BC2000 Hsdpfxsxyud Uo Adzsr • Aluminum platform Bär BC2000 S4-C4 • Two-button foot control • Dual roll-off protection • LED platform lighting Safety and Lighting: • LED mini lightbar on the vehicle roof / 2 LED front flashers • Pneumatic special signal system MARTIN-HORN • Rear-view camera • Comprehensive LED lighting in the crew and all equipment compartments • LED perimeter lighting on the body and additional floodlights • Pneumatic LED light mast with remote control We would be pleased to provide a detailed quote and present the vehicle to you at our location in Berlin. All information provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This ad does not constitute a binding offer, but is for informational purposes only. Subject to prior sale!

Condition: used, mileage: 610,000 km, power: 390 kW (530.25 HP), first registration: 07/2017, fuel type: diesel, axle configuration: 4x2, color: white, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, BIG Space, 2.5m cab – 3700mm wheelbase – Standard fifth wheel coupling, Jost JSK – Automated Mercedes PowerShift 3 gearbox – Gearbox with integrated GPS for reduced fuel consumption (PPC) – High-performance enhanced engine brake – Aquatarder – Auxiliary electric air conditioning – Automatic climate control – Luxury lower bunk – Hot water cabin heater – Pneumatic driver’s seat, comfort – Electric tilting roof – Active Brake Assist – Attention Assist – Halogen fog lights – Stability control (ESP) – Anti-skid system/lane keeping assist – EPB braking system with ABS and ASR – Cruise control – Spare wheel Hsdpfxszp R T Ro Adzor

Condition: good (used), machine/vehicle number: 2537, Year of construction: 2012, load capacity: 18,000 kg, lifting height: 4,540 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 4,860 mm, total width: 2,650 mm, operation weight: 22,200 kg, additional equipment features: Dual tread, Centralized greasing system, Equipment: lighting, SveTruck 1875-33 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00x20 Hjdoyuhpbepfx Adzer Wheel size – Steering wheel: 12.00x20

Condition: excellent (used), mileage: 203,546 km, power: 235 kW (319.51 HP), first registration: 01/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,900 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, total length: 10,000 mm, total width: 2,520 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, parking heater, = Additional Options and Accessories = - Aluminum fuel tank - Climate control - Refrigerator - Sleeper cabin - Air horn - Radio/CD player - Side mirrors with electric adjustment - Sun visor - Digital speedometer - Tool kit - Power take-off (PTO) - Central lubrication system = Additional Information = General Information Cabin: simple License plate: 15-BJD-6 Technical Information Number of cylinders: 6 Engine displacement: 10,518 cc Axle Configuration Brakes: Disc brakes Front axle: Max. axle load: 8000 kg; Tire tread depth left: 20%; Tire tread depth right: 20%; Suspension: Leaf spring suspension Rear axle: Max. axle load: 11,500 kg; Tire tread depth left: 20%; Tire tread depth right: 20%; Suspension: Air suspension Weights Unladen weight: 12,095 kg Payload: 8,405 kg GVW: 20,500 kg Functional Crane: HMF 1823K Maintenance APK (Technical Inspection): valid until 04.2027 Hedpjzmmipjfx Adzjr Condition Technical condition: very good Optical condition: very good Damage: none

Condition: used, mileage: 681,612 km, power: 427 kW (580.56 HP), first registration: 02/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Semi-trailer tractor unit MAN TGX 33.580, 6x4 with Palfinger Epsilon Q150Z96 crane, year of manufacture: 2017, fully air-suspended, retarder, tires: 20-30%, unladen weight: 14,010 kg, total weight: 26,000 kg, wheelbase: 5,250 mm, Austrian semi-trailer tractor unit in good condition. Chassis number: WMA30XZZ3JM67829, contact: Ivelina Redl (Russian, Bulgarian, Serbian, English, German), telephone number: , errors and prior sale excepted! ATTENTION: Our office will be closed from August 1, 2026, to August 16, 2026, due to company vacation. We will be available again from Monday, August 17, 2026! Hjdpfxov Sguao Adzjr

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA Hedpowruw Iofx Adzer * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system Hodpfx Aowruw Uedzer * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Schleicher 3 unit drilling machine after lignum renovation. Machine equipped with upper units 3 pieces .Pneumatic pressure .Working realized by forcing the button unit the rest of the automatic .Choice of units possible each one or all .Speed and depth of drilling the possibility of setting .Machine after major repair .New electricity and driver .Net price vat invoice warranty one year .The machine can be additionally equipped with rulers bumpers pressures and drilling heads of any spacing . Hsdpfx Aot Ndznjdzer

Condition: used, mileage: 110,297 km, power: 235 kW (319.51 HP), first registration: 09/2015, fuel type: diesel, empty load weight: 15,020 kg, maximum load weight: 10,980 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,600 mm, brakes: retarder, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 6, loading space volume: 18 m³, Equipment: ABS, additional headlights, air conditioning, cabin, compressed air brake, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, * German vehicle * 1st owner * Only 110,297 km - original mileage * Documentation available * Condition as shown in photos * FAUN ROTOPRESS 518 * 18 m³ rear loader refuse collection body * TERBERG OmniDEKA lifter * Automatic lifter * Suitable for container sizes from 80 to 1,100 litres * 6 seats (driver + passenger + 4 on rear bench) * Air conditioning * Retarder * STOP BRAKE (bus stop brake) * Leaf/air suspension + lifting/lowering function * Steerable and liftable trailing axle * 2 air-suspended comfort seats * Heated seats * Electric windows * Electrically adjustable and heated mirrors * Cruise control * Roof hatch * Central lubrication system * Automatic transmission * Blind spot assist * Reversing camera * ABS/ASR/ESP * Stereo CD Hjdpfx Asxyacvodzsr * Telephone pre-installation/hands-free system * Work lights * Rotating beacons * Multifunction steering wheel * Keyless central locking * Storage box * Wheelbase: 3,600 mm + 1,400 mm * Gross vehicle weight: 26,000 kg / technically rated up to 28,000 kg * Unladen weight: 15,020 kg * Payload: 10,980 kg / technically rated up to 12,980 kg If a new TÜV inspection is required, we are happy to provide a quote via our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the vehicle in order to avoid any misunderstanding regarding the condition and suitability of the product. Viewing and inspections are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in the offer. The buyer is obliged to personally verify the condition and equipment of the vehicle. Subject to changes, prior sale, and errors.

Condition: good (used), mileage: 598,287 km, power: 391 kW (531.61 HP), first registration: 04/2022, fuel type: diesel, tire size: 385 / 55 / R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: grey, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, total length: 5,960 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, power mirror, second fuel tank, soot filter, spoiler, General information Number of doors: 2 Cab: Highline Technical information Number of cylinders: 8 Engine capacity: 16.353 cc Transmission Transmission: Scania Opticruise, 12 gears, Automatic Axle configuration Make axles: Scania Brakes: disc brakes Front axle: Tyre size: 385 / 55 / R22.5; Max. axle load: 7500 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 8.901 kg Carrying capacity: 10.099 kg GVW: 19.000 kg Interior Interior: black Number of seats: 2 Environment Emission class: Euro 6e Maintenance APK (MOT): tested until 04/2027 History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio - Radio, MP3 enabled - Remote central locking - Speed limiter - Spotlights - Stability control Hodpfx Adozmdz Aozsr - Toolbox - Visor - Webasto - Xenon lighting

Condition: used, mileage: 243,811 km, power: 240 kW (326.31 HP), first registration: 08/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, loading space volume: 45 m³, loading space length: 8,227 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * ANTOS 2533 L beverage box truck, 8.20 m with DAUTEL tail lift, 2,000 kg capacity * Body: WINGLINER roof system * Rear tag axle, hydraulically steered and liftable * OM 470 engine, inline 6-cylinder, 10,677 cc displacement * Vehicle No. for customer inquiries: 4591 * Tag axle, 7.5 t, steered, weight-relieved, liftable * Predictive Powertrain Control * Turn Assist * Adaptive Cruise Control * Bi-Xenon headlights * Rear axle differential lock * Air conditioning * Engine version EURO VI, D * Safety Package * Lane Keeping Assist * Roll Stability Control * Tail lift * Active Brake Assist 4 * Standard trailer coupling, D40, Ringfeder * Attention Assist * High Performance Engine Brake * Rear axle air suspension * Adjustable air deflectors * Axle configuration 6x2 * Rain/light sensor * Electronic Stability Program (ESP) * Front axle air-suspended * Auxiliary hot water heater, cab * Driver airbag * Trailer brake connection rear, Duo-Matic + Standard * Trailer brake, 2-line, brake connections left * 24 V 15-pin trailer socket Hodpsyh R U Refx Adzor * Antos model * Electronic braking system with ABS and ASR * Comfort driver's suspension seat * Transmission G 211-12/14.93-1.0 * Mercedes PowerShift 3 * Reversing alarm combined with hazard warning system * Central locking system * External sun visor, transparent * Cruise control * Raised storage, on engine tunnel * AdBlue tank 60 l, left side * Start assist, speed limiter 30 km/h * Roof hatch/ventilation flap * Weight variant 26.0 t (7.5/11.5/7.5) * Electronic air supply unit for heating * M-driver's cab ClassicSpace, 2.30 m, 320 mm tunnel * Engine OM470, I6, 10.7 l, 240 kW (326 hp), 1,700 Nm * Wheelbase 5,200 mm * Tubeless tires, 315/70 R 22.5 rear axle * Tubeless tires, 385/55 R 22.5 front/mid/rear-axle * Headlight cleaning system * Sun blind, side, driver's side * Tank 290 l, left, 650 x 565 x 950 mm, aluminium * Prepared for toll collection system * Additional stabilizer, rear/tag axle * Digital tachograph, 2nd generation * Environmental sticker (green) * Two-seater * Full service history (service booklet maintained) No liability for misprints or typographical errors. Sale to commercial customers only. Subject to prior sale and changes; errors excepted. The description is for vehicle identification only and does not represent a warranty in the legal sense; only the description in the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to offer you a LEASING – FINANCING – HIRE PURCHASE option. Warranty insurance available on request through insurer * TÜV / statutory safety inspection / tail lift inspection / tachograph check and OBU device installation available through our local partners * Export license plates for 30 days available All customs documentation for export possible but must be requested individually * Toll payment (Toll Collect) can be handled in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * ---- Visit us on our website at * over 200 vehicles in stock at all times