Used Schorr Wood Splitter for sale (6,766)

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: Godpfx Aoh Eiw Ishzsud - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Request more information

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter Gedpfx Aheh Hnp Dezjud - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design Gedpfxspdqzxs Ahzeud A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement - Godpoutmw Hsfx Ahzjud

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Shredder, wood chipper, and wood shredder: Hacker, MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies looking for an economical and powerful solution. The machines are manufactured and directly distributed from our factory in Germany. Advantages: - Continuous, even shredding process - High performance with low energy consumption Gedpfx Ahozluayezoud - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase current) - Controlled by Siemens PLC - Includes optional scraper bar - MHR630 ecoline Rößler shredder: "Made in Germany"

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,250 kg, fuel type: electric, For sale is a ROBUST REUSER SD 600 industrial shredder in like-new condition. The machine comes from an exhibition and has not been used in production. It has no operating hours and is therefore offered as a new machine from an exhibition. The SD 600 is a compact and powerful shredder for various materials, such as wood, plastic, cardboard, paper, and electrical cables. Thanks to the PLC control, automatic operation, and robust cutting unit, the machine is ideal for craft, recycling, and industrial businesses. Technical data: Model: ROBUST REUSER SD 600 Condition: New machine / Exhibition machine Operating hours: 0 Motor power: 15 kW Operating voltage: 400 V Frequency: 50 Hz Fuse rating: 40 A gG / 50 A D Weight: approx. 1,250 kg Dimensions L × W × H: 1.88 × 1.12 × 1.67 m Rotor diameter: 222 mm Rotor length: 550 mm Rotor speed: 80–120 rpm Number of cutting blades: 14 Size of the feed opening: 946 × 567 mm Granulate size: approx. 10–30 mm Capacity: up to 2.5 m³ per hour HOLE SIEVE HARDOX 450 (30mm) The actual throughput and granulate size depend on the material used and the size of the sieve openings. Features and advantages PLC control included Suction connection Ø 160 mm included Fully automatic operation Hardened blades with four usable cutting edges Robust sieve made of HARDOX Godpfxezl A I Eo Ahzjud Protected hydraulic system Star-delta motor control Quiet and energy-efficient operation Compact and robust design Easy installation Low maintenance requirements We offer the following warranty on the machine: 12 months or up to 1,000 operating hours, whichever comes first. The machine is available immediately. Inspection and further information are available by prior arrangement. The stated selling price is a net price. The statutory value-added tax will be added and shown separately on the invoice. Sale subject to prior sale and errors.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: - For classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the traversing table, headstock and consoles - Traversing table in gantry design - Rack and pinion drive, helical, in X and Y direction, ball screw spindles Z-direction for precise positioning - Machining dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. travel distances: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height DYNESTIC table Z = 100 mm from the top edge of the table (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Solid, continuous machining table with grid division - Continuous grooves in X and Y direction - Groove spacing 50 mm - with 25-meter sealing cord for clamping the wear plate - Vacuum fields: 1-circuit vacuum system - Drilling head 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - individually selectable - Arrangement in U-shape - 5 + 4 in X and 4 in Y direction - 32 mm grid - max. drill diameter: 35 mm - Total drill length: 70 mm from the mounting end (depending on plate thickness) - Spindle stroke: 70 mm - Direction of rotation: Alternating clockwise / counterclockwise - n(max): 1000 - 4400 rpm, infinitely adjustable - Shank: M 10 thread - interference fit 11 mm - without tool, without shank - 6 horizontal spindles: - 2 double drilling spindles in X direction - 1 double drilling spindle in Y direction - Shank: M 10 thread, interference fit 11 mm - Total drill length max. 63 mm from the mounting end - without tool, without shank - Milling head 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm, infinitely adjustable - max. power at 12000 rpm to 24000 rpm - air-cooled - with HSK-F 63 tool holder - with right-hand thread (for right-hand cutting tools) - with collet chuck with HSK shank - Ceramic ball bearing (hybrid bearing) - Tool weight max. 6 kg (including holder) - Tools: Milling and grinding tools max. Ø 160 mm - Safety guard according to CE standard - Protective fence on the side and rear - Vacuum pump: 500 m³/h, dry-running - Personal safety through light curtains in the front machine area - Handheld control unit for remote control of the machine with the following operating functions: - Start / Stop of the machining program Godpfx Aszlbrpjhzsud - Speed control of the machining cycles - Reset button - Manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication according to defined lubrication intervals - Additional sealing against dust by overpressure in each guide carriage - Simultaneous lubrication: - for all linear guides in X, Y, and Z direction - for all ball screw spindles in Y and Z direction - for all milling spindle guides - for tool changer guides (except ...

Condition: excellent (used), Year of construction: 2019, – Feed opening size (width/length): 820 x 1050 mm – Rotor diameter: 300 mm – Rotor length: 820 mm Gsdpfxezkb Uzj Ahzoud – Total power: 18,5 kW – Power supply: 400 V, 50 Hz – Rotating knives: 35 x 35 mm – Number of knives: 40 pcs – Siewe Ø: 15 and 25 mm - Output : Screw in the bottum of machine + 3000 mm waste conveyer – HYDRAULIC DRAWER – Pressing drawer height: 320 mm – Outlet diameter: Ø200 mm – Dimensions (L/W/H): 200 / 150 / 175 cm – Weight: ~1600 kg

Condition: like new (used), Manufacturer / Model: JENSEN A530 L Country of manufacture: Germany (Handmade in Germany) Year of manufacture: 2021 Mileage: 27.7 operating hours (factory condition!) Gjdpfezlu Rfox Ahzeud Engine: KUBOTA diesel engine Type of chipper: Disc chipper (blades in perfect condition) Maximum material diameter: approx. 130 - 150 mm (depending on the wood's hardness) Infeed system: 2 horizontal hydraulic rollers (smooth speed adjustment) Discharge chute: Rotatable within a range of 270° with an adjustable deflector No-Stress system: Yes (automatically controls the operation of the rollers depending on the engine speed)

Condition: excellent (used), For sale is an industrial autoclave (pressure impregnation unit) manufactured by the renowned Czech company VYVOS spol. s r.o. This unit, with a substantial capacity of 75 m³, is designed for professional wood impregnation using the pressure-vacuum method. The machine was previously used with popular impregnation agents (the unit displays a Tanalith E marking), making it an ideal solution for sawmills, wood processing plants, and manufacturers of garden architecture. Parameters and Technical Specifications: According to the attached original nameplate and documentation, the unit has the following parameters: Gedpfszlu N Uox Ahzjud Manufacturer: VYVOS spol. s r.o. (Czech Republic) Year of manufacture: 2005 Working capacity / Volume: 75 m³ Basic dimensions (chamber): approx. 2.0 m x 13.2 m (the total length of the unit is over 14 m, according to the technical drawings) Maximum working pressure (overpressure): 0.8 MPa (8 bar) Maximum working temperature: 20°C (typical for cold impregnation) Factory number: 2119 Registration number (passport): 1302/2004 Key features and equipment: Robust construction: Thick-walled pressure vessel made of steel, guaranteeing safe operation under load (secured with a locking servomotor-operated hatch). Complete automation system: Control cabinet visible in the photos, with a system of switches, indicators, and an integrated pump power supply system. Included accessories: The machine is sold with the piping system, pneumatic/hydraulic valves (including DN 40, DN 80, DN 200), pressure pump, and auxiliary tank (green) visible in the photos. Documentation: I am including extensive technical documentation with the unit, as shown in the photos, including detailed engineering drawings (sections, locking details), installation diagrams, and valve specifications (including protocols for safety valves set at 0.9 MPa and 1.0 MPa). Technical condition: The unit is used and shows signs of standard industrial operation. The steel structure is in very good technical condition. The machine requires dismantling, re-commissioning, and calibration at the new destination. I encourage you to contact me to arrange an on-site inspection of the machine. I have complete documentation in paper form available for serious buyers to review.

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: Gujdpfx Ajzlbp Uohzjd - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, motor 12 kW - with additional locking of the C-axis - Tool changer positions: 24 with disc changer

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical system 3x400V 50 / 60Hz - Cardan-mounted 5-axis electric spindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings incl. liquid cooling with stepless height-adjustable extraction hood - electrically controlled - Full rated power at approx. 12,000 rpm - Speed: 1000 - 24000 rpm - Drive: 3-phase AC motor controlled by inverter - Direction of rotation: right/left - 2 controlled compressed air connections - Interface for attachments - Tool weight (turning): 6 kg - max. saw blade Ø 350 - Spindle cooling: liquid cooling - Extraction hood steplessly adjustable - Profit H350 16.30: CNC machining center in gantry design (without tooling) with digital drives (driven on both sides). The machine stand of the Profit H350 16.30 is made of thick-walled, electro-welded profile tubes. The steel bracing inside the stand ensures high stability. - Machining area H350 16.30: Travel range of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working area: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (see layout). - Driven on both sides - Guide system X-axis: The drive of the gantry on the X-axis is via a rack with a slanted, crowned tooth shape - This guarantees highest precision. The reduction gearbox ensures the highest machining quality and repeatability. The bearings are mounted using encapsulated, hardened and ground linear guides. - Guide system Y-axis: The bearings are mounted using encapsulated, hardened and ground linear guides. The Y-axis is positioned by means of a ground ball screw. - Guide system Z-axis: The bearings are mounted using encapsulated, hardened and ground linear guides. The Z-axis is positioned by means of a ground ball screw. - Automatic central lubrication: The grease is controlled to the guide carriages of the X, Y and Z axes as well as to the ball screws in Y and Z supplied. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left side of the machine stand incl. a pickup position for attachments: The 12-position linear changer ensures the shortest changeover times and offers sufficient space for milling tools. An attachment change station (equipment options see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical, 12 spindles: 7 spindles in the X-direction and 5 spindles in the Y-direction. Horizontal, 6 spindles: 4 spindles in the X-direction and 2 spindles in the Y-direction. Pre-stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and can be activated. 1 nut saw in the X-direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed steplessly up to 7500 rpm. The drilling unit covers the entire working area both horizontally and vertically. - Controlled central extraction connection: The program control determines whether the drilling head or the milling spindle is extracted. This controlled slide ensures optimized extraction performance. Connection diameter see layout Gujdpfjzlbpbox Ahzod - 6 tool...

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,250 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker waste material shredder, wood shredder, chipper, shredder MHR630 proline The MHR proline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideally suited for craft businesses, recycling companies, and industrial operations seeking an economical yet powerful solution. The machines are manufactured in our factory in Germany and sold directly. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - 2 knife rows for increased throughput - Robust construction - Larger feed opening - Excellent value for money - Ready to connect Godpfjzlbxijx Ahzeud - Siemens PLC controlled - MHR630 proline Rößler waste material shredder – “Made in Germany”

Condition: excellent (used), Mesh size 50x50 mm. Engine power: 19.5 kW. Inlet: 42 cm. Gujdpfxozldmvo Ahzjd

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: Travel ranges: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen panels Milling bed made of 19 mm MDF as sacrificial plate with guide rails and T-slot nuts for clamping. Chassis with reinforcements, filled with polymer concrete, designed for transport by pallet truck or forklift. Guodpozk Npgsfx Ahzjd Mechanical set consisting of profile rails including linear guides and ball screws (2010 and 1605) for all axes. Shaft couplings and high-performance grease for lubricating the carriages; also includes energy chains with connection sets. Control set comprised of a Triple Beast controller for controlling 3 axes, with Ethernet interface. Leadshine drive for the fourth motor. Four stepper motors, 5.0A, 3Nm each with motor cables, as well as a 48V 6.7A switching power supply, LED board for breakout board, ribbon cable and proximity sensors; small parts such as wire leads, ferrules, control cables, heat shrink tubing, and cable lugs. Fully pre-installed in an aluminum enclosure including electrical kit and emergency stop. - 21.5 inch built-in monitor, including mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as mouse and keyboard, all pre-installed in an ergonomic console. Tool length sensor for determining tool length and adjusting the active reference point. Special equipment: - High-frequency spindle with 2.2 kW, including clamping nut, frequency inverter, line filter, brake resistor, and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solids Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2018, Used angle head for Holz Her CNC machining centers Year of manufacture: 2018 HSK 63 F shank with torque support with 2 horizontal tool spindles suitable for accommodating a CLAMEX grooving cutter as well as a saw blade Technical data: Godpozk Nlusfx Ahzjud max. drive speed 8000 rpm max. output speed 12,000 rpm Permissible operating temperature 85°C Head can be swiveled 360° around the drive axis Sound level 80 dB(A) Weight 3.257 kg Availability: short notice Location: Hochheim

Condition: like new (used), Various inserts for the Maweg gluing press. Guedpofl Ikkofx Ahzjd Various dimensions, mostly unused. Made of laminated oak.

Condition: good (used), Grecon notching system Infeed with cross buffer for packet formation 2 milling machines connected, 600 mm table width each milling machine with glue rollers - automatic transfer - continuous press feed Godsh I Dufepfx Ahzsud - crosscut saw - outfeed roller conveyor with cross transfer Input widths 500 - 4000 mm The system has been dismantled and is available for immediate delivery. The control system is defective; a new control system with program is included. It has not been installed, and the program has not been tested.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and Technical Data: - Base machine 555 - Milling dimensions: - X = 3,514 mm - Y = 1,544 mm - Maximum machining dimensions: - X = 3,868 mm - Y = 1,746 mm - Z = 325 mm - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis, 6 in the Y-axis - Individually selectable - T-shape arrangement - Maximum drilling diameter: 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Alternating right- and left-hand rotation - Infinitely variable spindle speed: n = 4,725 rpm - 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946: - Motor: 3.5 kW - Pneumatically swiveling to 90° - n = 5,300 rpm - Tool holder: A Ø = 200mm, I Ø = 30mm, B = max. 3.5mm - Sawing/grooving in X and Y directions - Milling unit 7935: - With 6 kW, water-cooled spindle - Milling unit 7982: - For lock case routing - Tool changer 7996: - 18-position carousel magazine - Vacuum pump with 140 m³/h Gjdpfx Aezk N Hlohzsud - Handheld control unit - PC control with TwinCAM WOP system - Siemens control system Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Godpfxjzk Nz Ao Ahzjud - Console machine (6 units) - Travel distances: X = 3490 mm Y = 1690 mm Z = 205 mm - Machining dimensions: X = 3050 mm Y = (Max. milling dimension - tool radius) 1345 mm Z = 150 mm - Drilling head TF 20 - Power 2.2 kW - 8 vertical spindles, spindle spacing 32 mm in X - 6 vertical spindles, spindle spacing 32 mm in Y - 2+2 horizontal spindles in X - 1+1 horizontal spindles in Y - with integrated scoring blade 120 mm - with electric milling spindle 9.2 kW with ISO-30 tool holder - with C-axis - with angular head - with 12-position tool changer - with tool change position for angular heads - with vacuum pump 80-100 m³/h - Total connected load 16 kW - Compressed air 6 bar - Compressed air consumption 210 NL/m - Extraction nozzle 250 mm - Extraction volume 5300 m³/h - Extraction speed 30 m/sec - Dimensions: 5940 x 3800 x 2510 mm - Weight: 3700 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Guodpfszk Nvgsx Ahzjd Equipment and technical data: Nesting system with grid table Processing dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Traverse paths: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc tool changer with vacuum pump 250 m³ with handheld control device with central lubrication with minimum quantity lubrication system Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Travel paths: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder: HSK 63 F - Speed: 1,000 - 18,000 rpm Godpezk Nu Nsfx Ahzsud Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles, 32 mm pitch - Horizontal spindle: 1+1 - Vertical spindle: 1+1 Grooving saw in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Guodpfx Ahjzk Nmfozod Condition: Functionally tested Equipment and technical data: Travel distances: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling spindle: - 6 kW, water-cooled - Tool interface HSK 63 F - Speed 1,000 - 18,000 rpm - Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in a 32 mm grid - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Dadoing cutter: in the X-direction Control system: Twin CAm 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5200 x 2843 x 1855 mm Weight: approx. 3,500 kg Availability: upon agreement Location: Röllbach

Year of construction: 2009, condition: new, Face plate and drive plate set in a wooden box. Gedpfx Ahodr Iupszjud

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR Gjdpfx Ahoza Ei Njzeud (Prices may vary in case of significant fluctuations)