Used Scm Automatic Planer for sale (21,743)

Condition: good (used), WIDE BELT SANDER SCM Sandya 10 Sanding width 1100 mm First unit with hard rubber calibrating roller Second combination unit with soft rubber roller and pad Single motor for both units - 18.5 kW Pneumatic oscillation Adjustable feed speed Podpoyy Nnksfx Ag Dsgk Electric table adjustment Table position display Thickness gauge Good condition, tested and ready for demonstration

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 9 m/min, total length: 4,400 mm, total width: 685 mm, Equipment: CE marking, documentation/manual, SCM Olimpic K 230 evo edge banding machine in excellent condition. Bought new, first owner. All documentation and tools are included. Extraction pipes with branches are included up to the shut-off valve. Extra set of diamond pre-milling tools. Additional options: - Rounding unit - Nesting sensors - Riepe bottles at 3 positions - Glue scraper unit Technical data: - Feed speed m/min: 9 - Panel thickness mm: 8 – 60 Pgodpjyxhqnsfx Ag Dsk - Edge band thickness in strips mm: 0.4 – 3 - Edge band thickness on roll (incl. covers) mm: 0.4 – 3 - Max. cross-section edge material for cutting mm²: 135 - Roll holder diameter mm: 780 - Max. edge band overhang vs. panel mm: 4 (2 – 2) - Min. distance between 2 panels mm: 700 (600*) - Min. panel length (minimum width 100 mm) - With edge band in roll or strips mm: 160 (140*) - With solid wood strips mm: 220 (140*) - Min. panel width with edge band on roll (min. length 210 mm) mm: 90 - Working height of the machine mm: 900 - Width of fixed panel support mm: 500

Condition: good (used), functionality: fully functional, SCM T130 Spindle Moulder Spindle diameter: 30 mm Spindle length: 140 mm Pgodpsyzh Sqefx Ag Djk Main motor power: 4 kW Speed change via belt: 3000/4500/6000/7000/10000 rpm Longitudinal sliding carriage in the worktable

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Spindle configuration 1st spindle: Planing spindle – 4 kW 2nd spindle: Right vertical spindle – 5.5 kW 3rd spindle: Left vertical spindle – 5.5 kW 4th spindle: Top horizontal spindle – 4 kW 5th spindle: Bottom horizontal spindle – 4 kW 6th spindle: Universal spindle – 4 kW Spindle speed: 6,000 rpm Spindle diameter: 40 mm Working area Working width: 25–230 mm Working height: 10–120 mm Min. workpiece length: 450 / 630 mm (depending on version) Feed Pedpfx Agjyym Nrj Djgk Infinitely variable: 5–25 m/min Feed rollers Ø 140 mm Infeed table 2,000 mm Tooling ranges Vertical spindles: 100–180 mm Horizontal spindles: up to 180 mm Max. profiling depth, vertical: 40 mm Features Manual table and central lubrication Robust industrial design, smooth operation and high precision

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Workpiece length for pendulum operation mm 1390 Stroke X-Y-Z Axes mm 3460-1735-250 Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Pgsdeyymz Uopfx Ag Djk Tool changer traveling with unit carrier in X 4 places, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Programming - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S

Condition: excellent (used), SCM K360 HP Edgebander Liquids Pre-milling cutters, Glue application by roller, Interchangeable glue tank Equipped with glue discharge Pneumatic pre-cut guillotine, Podpfeyyvg Hex Ag Degk Finishing saws for precise trimming Top-bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polisher, Machine equipped with NC control Max workpiece height: 60mm Max edgeband thickness in roll: 3mm Feed speed: 11m/min Original mileage less than 10,000 meters; in my opinion, its technical condition is not far from a new machine Can be checked and tested on site

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Equipment and technical data: - Planing width: 410 mm - Min. thicknessing height: 3 mm - Max. thicknessing height: 240 mm - Max. cutting depth: 7 mm - Total table length: 2060 mm - Number of knives: 3 pcs. Tersa knives - Thickness table adjustment: motorised - Thickness display: mechanical - Motor: 4 kW - Feed speed: 6/12 m/min - Infeed roller: steel - Outfeed roller: steel - Extraction port diameter: 120 mm Availability: short term Pgodpjxwz Izofx Ag Dsk Röllbach

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Pgjdpfx Agoyywi Ao Dsk Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: used, Year of construction: 2018, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 100 mm, saw blade diameter: 315 mm, saw blade bore: 30 mm, overall weight: 295 kg, extraction nozzle diameter: 120 mm, sliding table length: 1,600 mm, The used SCM panel saw SC 2C is a modern and precise panel saw designed for professional woodworking applications. It stands out with its compact design, high cutting accuracy, and easy operation. The machine comes from private ownership and is therefore offered without deductible VAT. Pgodpoyyl Hvjfx Ag Dok

Condition: excellent (used), 4-SIDED SIZING-SHAPING LINE (currently for Internal Doors). Composed by of the following machines: X10023A) Motorized infeed rollers table "CELASCHI"" X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. Pjdpewzmbqofx Ag Dogk X10023D) Double End Tenoner "CELASCHI"" Mod. TSA 2 B 360 Installed power KW 60

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Maximum panel thickness: 60 mm Pre-milling unit Gluing unit with glue pot Edge trimming unit Corner rounding unit Edge and glue scraping unit Pedpfsyziutjx Ag Djgk Polishing brushes Control: StarTouch with touchscreen

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Pgjdpeyq Tb Isfx Ag Dek Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Pgedpfxoxy Tmne Ag Dek

Condition: used, SCM Sandya LS1 R110 calibrating machine with 1100 mm roller and brush. Approximate power consumption: 13 kW. Used. 11 kw roller Psdpfsuk Hi Rex Ag Dogk 2.2 kW brush Carpet 0.75 kw

Condition: excellent (used), Wide Belt Sander SCM sandya 7 Sanding width: 1100 mm 1st unit with metal calibration roller, 15 kW 2nd combination unit with rubber roller and pad, 15 kW Minimum electrical protection: 32A Pad with quick lift and drop function Pneumatic oscillation Variable feed speed Electric table height adjustment Table position display Pneumatic feed belt centering Robust sander, excellent sanding quality Pgodeyx Dvyepfx Ag Dok

Condition: used, Year of construction: 1995, functionality: fully functional, SCM si150 Panel Saw Specification: • Condition – used, after a comprehensive overhaul • Manufacturer – SCM • Model – si 150 • Sliding table length: 150 cm • Blade diameter: 300 mm • Machine equipped with a scoring unit • Main saw motor: 4.0 kW • Blade tilting: manual • Manual blade raising and lowering • Blade guard on spring support • Maximum cutting height: 95 mm Pjdpfx Agsyy Sq Us Degk • Side table dimensions: 85 x 60 cm • Extraction port diameter: 100 mm • Cart with wheels for machine relocation included • Weight: 480 kg • Year of manufacture: 1995 • Overall dimensions: 151 x 270 x 137 cm (W x L x H) • Transport dimensions: 151 x 125 x 137 cm (W x L x H) Additional information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Testing and demonstration on-site available • Free training on machine operation (at company headquarters) • The auction price does not include VAT or transport costs Financing and transport: • We organize transport with our MDD fleet, courier services, or external carriers • Financing available through leasing or a lease loan

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,330 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, overall weight: 670 kg, Equipment: CE marking, saw blade guard, – Italian production – year of manufacture: 2012 TECHNICAL SPECIFICATIONS: – carriage length: 3200 mm – cutting width on the right: 1330 mm – saw blade diameter: min. 250 mm, max. 315 mm – scorer blade diameter: 120 mm – main motor: 5.5 kW – scorer motor: 0.75 kW – brake – main saw spindle diameter: 30 mm Pgjdpfxoyxph Uj Ag Dek – scorer spindle diameter: 20 mm – cutting height adjustment – cutting angle adjustment: 0° - 45° – max. cutting height: 100 mm – two latches – movable guard – extraction nozzle diameter: 80 and 120 mm – dimensions (L/W/H): 340 / 220 / 170 cm – weight: ~ 670 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, input voltage: 230 V, type of input current: three-phase, working height: 150 mm, We offer this very well-maintained SCM Multiflex C window and door machining center, year of manufacture 1995. Purchase date: June 1995 Tenoning carriage power: 15 hp Profiling spindle power: 10 hp each Tenoning spindle height: 320 mm Profiling spindle height: 320 mm Electrical connection: 3x230 V Glazing bead recovery system Pgodpeyvhnuofx Ag Dsk The machine is still in very good working order. It has had only one owner throughout all these years, used exclusively in a family carpentry workshop (father and son). Therefore, the machine is certainly not worn out. Reason for sale is the modernization of the machinery fleet. A new SCM corner joint machine has been acquired. The machine remains fully operational and can be inspected and tested until June. All features and functions are still intact. Sold without tooling (cutters).

Condition: used, functionality: fully functional, SCM 900 RT Wide Belt Sander Specification: • Condition - used, after a comprehensive inspection, calibration, and replacement of all seals • Manufacturer - SCM • Model - 900 RT • Working width - 900 mm • Maximum working height - 160 mm • 1 combination sanding unit (hard roller with 200 mm diameter + sanding pad) • Main motor power - 7.5 kW • 2 machine feed speeds • 2 conveyor speeds • Analog thickness indicator for the workpiece • Pneumatic oscillation Pjdpoyy Ngysfx Ag Dogk • Abrasive belt size - 2300 x 900 mm • Weight approx. 1200 kg • Overall dimensions: 185 x 155 x 210 cm (L x W x H) Additional Information: • The machine is in good technical condition and ready for immediate use • The photos shown reflect the actual condition of the sale item • Possibility to switch on and inspect the machine on site • The auction price does not include VAT or transport costs Financing and Transport: • We organize transport using the MDD fleet, courier companies or external carriers • We offer financing support in the form of leasing or lease-loan

Condition: used, Year of construction: 2014, functionality: fully functional, SCM Sandya 1S 950 RT Wide Belt Sander Specification: • Condition – Machine is virtually new, 100% original • Manufacturer – SCM Podpsyy Nc Uofx Ag Dogk • Model – Sandya 1S • Working width – 950 mm • Max working height – 160 mm • 1 combination sanding unit (steel roller + pad) • Main motor power – 5.5 kW • 2 feed speeds • 2 conveyor speeds • Electronic thickness gauge for sanded workpiece • Optical oscillation system • Thickness meter for sanded element • Abrasive belt size – 1530 x 970 mm • Complete documentation from the manufacturer (in Italian) • Weight – 650 kg • Year of manufacture – 2014 • Overall dimensions: 150 x 143 x 170 cm (L x W x H) Additional information: • The machine is in perfect technical condition, ready for immediate operation • The attached photos show the actual condition of the item for sale • Possibility to power on and test the machine on site • Free operator training provided at company premises • The price listed in the auction does not include VAT or transport costs Financing and transport: • We organise transport using the MDD fleet, courier companies, or external carriers • Financing options available in the form of leasing or lease-loan

Year of construction: 1990, condition: used, edge heights: 10 - 60 mm edge band material thickness: 0,4 - 25 mm electr. connection: 380 V, approx. 9,9 kW Psdpfx Ao T T Ddsg Djgk space needed: 2900 x 870 x 1320 mm weight: 780 kg

Condition: used, Year of construction: 2013, power: 9.5 kW (12.92 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,250 mm, number of axes: 3, actuation type: electric, total height: 2,244 mm, total length: 5,240 mm, total width: 2,500 mm, overall weight: 2,700 kg, Equipment: CE marking, We offer this used SCM TECH Z1 machining centre, year of manufacture 2013. Type designation: FORA-FRESATRICE CN Manufacturer: SCM Serial number: AA1/017424 Type: TECH Z1 Model: TECH Z1 Pgedpfxjyvpp Ho Ag Dok Year of manufacture: 2013 Weight: 2,700 kg Rated voltage: 400 V Rated current: 31 A Frequency: 50 Hz Short-circuit current: 10 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), SCM T 120 C with power feed Pgodpfxsyw Syde Ag Dek

Condition: excellent (used), functionality: fully functional, SHEAR SCM 2050 X 4 USED MACHINE INTERNAL CODE: SVR 365 Pgedpfxoxzgyko Ag Dsk

Condition: new, SCM gabbiani p90 panel dividing saw - exhibition machine - special price! Technical data: Saw blade projection mm 90 Worktable height mm 950 Number of collets 5 as standard CUTTING DIMENSIONS mm 3300 x 3200 Variable saw carriage speed m/min 6 - 60 Variable pusher speed m/min 0 - 60 Saw blade motor power kW 7.0 Speed rpm 4650 Saw blade diameter mm 340 Saw shaft diameter of main saw blade mm 80 Scoring motor power kW 1.5 Speed rpm 5850 Scoring blade diameter mm 200 Scoring blade shaft diameter mm 80 Compressed air requirement NL/min 300 Compressed air bar 7.0 Extraction air requirement m3/h 2440 Pgedpfoiz A Amsx Ag Dok Extraction air speed m/sec 20 Suction nozzle diameter mm 4x120 including the following options: 590134 Cutting depth 3200 mm (version 33) OF0263 eye-M control panel with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation without "gateway" for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with castors, on the side of the longitudinal stop 590246 Fixed air cushion table 2500x800 mm with castors and reinforced fan 590239 2 x movable air cushion table 1500x600 mm with castors and reinforced fan 590244 Saw carriage with independent stroke control of the saw and scoring saw blade 590245 Optimized vertical stroke of the saw blade on 2 levels (medium/maximum) 590143 Device for grooves with manual height adjustment of the saw blade 590241 Execution of grooves (feed/return of the saw carriage) 590164 Double lateral automatic aligner 301230 Foot switch for starting and stopping the work cycle 590044 Compact labeling unit - printing of labels with barcode 590144 4 x additional clamps 900088 Magnetic tape monitoring of the pusher position 102015 European safety regulations (CE mark) 109993 MACHINE LANGUAGE: German