Used Scm Surface Planer And Thickness Planer for sale (21,561)

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Dcedpfx Ajz A Hhuodrsn

Condition: good (used), max width of workpiece 230mm max workpiece height 130mm 6 spindles 1) Horizontal bottom 230mm 5.5kW 2) vertical right 130mm + Dodpfjrqzvcsx Adrscn 3) vertical left 130mm; (2nd and 3rd spindle) 11kW 4) horizontal top 230mm 7.5kW 5) horizontal bottom 230mm 7,5kW 6) universal 230mm, adjustable 360° 7,5kW

Condition: used, Year of construction: 2026, New demonstration machine! General technical specifications: Motor power: 5.5 kW (7.5 hp) Infeed table length: 1200 mm Planing width: 500 mm Table height: 850 mm Cutting depth: max. 8 mm Speed: 5000 rpm Outfeed table length: 1640 mm Djdpfx Adez Dbp Njrocn Weight: approx. 1200 - 1250 kg - Operation: Electric cutting depth adjustment with display; concave/convex joint adjustment with display - Fence: Adjustable up to 45° with scale, single-hand operation, and integrated auxiliary fence - Cutterhead guard: Bridge guard - Extraction: Extraction port Ø 160 mm, minimum extraction air volume: 24 m³/min at 20 m/s, vacuum 810 Pa - Tool: TERSA solid steel cutterhead Z4, Ø 125 mm - Feed: Console for mounting a feed device - Electrical equipment: Electronic soft start/stop brake; contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, EMERGENCY STOP button; required voltage supply: 3 ~, 400 V, 50 Hz - Emission values: Emission sound pressure level at the workplace LpA according to EN ISO 11202 [dB(A)] - idle noise 77 / operating noise m, with extraction: 88 - Accessories: 1 pair of TERSA knives - standard 510 mm (installed), 1 grease gun with long-life grease, 1 internal hexagon wrench, 1 adjustable wrench, 1 tool for knife changes Special equipment: - Safety device SUVAMATIC - Spiral cutterhead Xplane with 3 spiral knife rows (26 domed carbide knives per row; 2 counter knives), delivery including full knife set and a T-key Torx T20; cutterhead speed 6,000 rpm included. The emission sound pressure level LpA is reduced by 8 dB(A) during machining. - Control panel combined and moves with the fence. The optional control panel offers maximum ease of use and overview, as the controls move with the smooth-running fence; the ON/OFF button for the cutterhead, the EMERGENCY STOP button, the electric cutting depth adjustment with digital display, and the electronic concave/convex joint display are within easy reach and in the best viewing position. Location: Rieth

Condition: reconditioned (used), functionality: fully functional, Planing width 510 mm, planing height 200 mm, manual height adjustment, star-delta switch, feed controlled by 2-speed foot pedal, main switch, emergency stop. Dcedpfx Adjx E Smmsrsn

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 432.07.383.14, functionality: fully functional, planing width: 410 mm, number of blades: 4, overall weight: 510 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Planing width: 410 mm Dcodpfx Aezkt Itsdron Planer cutterhead: 4-knife Felder system cutterhead Number of planing knives: 4 Feed table length: 2,200 mm Fence: 1,300 x 170 mm MACHINE DETAILS Motor power: 5.5 kW Motor voltage: 400 V Chip removal: 5 mm Dust extraction connection: 120 mm Weight: 510 kg EQUIPMENT Cutterhead with 410 mm planing width Infeed table with table length of 1,080 mm Fence with ruler 1,300 x 170 mm Fence guard, EURO standard 4-knife Felder system cutterhead

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, planing width: 530 mm, tool diameter: 125 mm, number of blades: 87, rotational speed (max.): 4,700 rpm, total length of planing tables: 2,900 mm, total width: 1,380 mm, total height: 850 mm, overall weight: 800 kg, Equipment: CE marking, Surface planer DMA with spiral cutterhead, 3 rows, 87 indexable inserts, insert dimensions 15x15x2.5mm. Infeed table 1625mm, outfeed table 1230mm, cutterhead diameter 125mm, cutterhead speed 4700 rpm. Working height 850mm. Robust fence, adjustable in depth and swiveling 90°-45°, inclination is easily readable from the front, thanks to round bar guidance and additional roller bearings, allowing for smooth adjustment. Fence dimensions 1300x170mm. Dust extraction port diameter 160mm, maximum chip removal 8mm. Dsdoz Eyp Ropfx Adrjcn Swiveling control panel located at eye level on top. Chip removal adjustment via scale with manual setting. Stable steel-gray cast iron construction guarantees precision and durability. The machine is run-in before delivery.

Condition: excellent (used), CATALOGUE NUMBER 7587 Technical specifications: - Shaft width 410mm Dcjdpfjzx Srmjx Adron - Number of knives 3 pcs - Brake - Table length 2540mm - Cast iron tables - Both tables adjustable - Original adjustable cast iron guide, adjustable at an angle - Motor 3kW - Dimensions (L/W/H) 2540x1000x1050mm - Weight 730kg Advantages: – Made in Poland – 3-knife shaft – Used thickness planer – Very good condition Net price: 7900 PLN Net price: 1840 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may vary in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6935 TECHNICAL DATA - Shaft width: 630 mm - Number of knives: 4 pcs - Maximum thickness of the workpiece: 210 mm * Top: - Feed pawls - Toothed infeed shaft, pull-type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pull-type * Bottom: - Adjustable rollers in the lower bed: 2 pcs - Motor: 4.4 kW Dcedpszr U Dxofx Adron - 2 types of feed speed - Dimensions (L/W/H): 1220x950x1060 mm - Weight: 750 kg ADVANTAGES - German-made - Used thicknesser, very good condition Net price: 12,900 PLN Net price: 3,000 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: used, Year of construction: 1979, Used Machine Year of manufacture: 1979 Features and technical specifications: - Planing table width: 500 mm - Planing table length: 2,650 mm - Cutter shaft: 2x strip planer blades - Motor: 3 kW - Planing guide can be tilted up to 90° The machine does not have a motor brake and can therefore only be sold for spare parts! Dcodpfezk Nmxsx Adrsn Availability: Immediate Location: 63934 Röllbach

Condition: used, Double-sided planer Jaroma, two-sided thicknesser DSRA - 40 Planing width: 40 cm 1 x bottom planing shaft with 4 knives, 5.5 kW (surface planer) Dcjdsy Nlp Aepfx Adrjn 1 x top planing shaft with 4 knives, 5.5 kW (thicknesser) 7 upper feed rollers Maximum planing height: 170 mm Minimum workpiece length: 350 mm Power requirement: 15 kW Feed: 2 speeds Machine tested, ready for operation, in very good condition.

Condition: excellent (used), 530mm Jointer MAKA 4 traditional knives width: 530mm Dsdpfx Adoyybv Herecn table length: 2900mm noise-reducing bars tilt-adjustable fence power supply: 380V, 4KW brake solid machine, very good condition, inspected

Condition: excellent (used), 4 kW motor Djdpfxsul Uvns Adrjcn Table width 52 cm table length 250cm 4 knives

Condition: used, Year of construction: 1993, Working width: 500 mm Cutter block: Leitz - Centrofix Number of knives: 4 Dcedpsyhgiaefx Adrjn Surfacing table length: 2800 mm Surfacing table adjustment: Lever Chip removal display: Scale Adjustable fence angle: Yes Motor power: 5.5 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 900 kg

Condition: used, SICAR thickness planer Dedjzha I Ujpfx Adrecn Planing width: 500mm, 4 traditional knives, i.e., wedge-type knives. 2 feed speeds for the thickness planer, Mechanical adjustment of the thickness planer table, Max. planing thickness: 230mm, Length of planer bed: 202cm, with extension to 240cm, Adjustable planer fence, 4KW motor.

Condition: new, Year of construction: 2025, machine/vehicle number: KK00050613, input frequency: 50 Hz, type of input current: three-phase, total length of planing tables: 2,250 mm, overall weight: 695 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, planer shaft diameter: 120 mm, planing height: 240 mm, Equipment: motor brake, Holzkraft jointer and thickness planer minimax fs 52 TERSA, Planing width 520 mm, planing height 3 - 240 mm, Jointer table length 2,250 mm, 4-knife TERSA planing cutterhead, Motor 7 kW (9.5 hp); S6 5-meter connection cable 2.5 mm² with 16 Ah plug, complete with: simultaneously folding tables, common dust extraction hood for jointer and thickness planer D = 120 mm, thickness table adjustment via handwheel with integrated display, star-delta switch, Dcjdpfx Adexn Suaoren auxiliary fence, CE and BG certified for wood dust. Order No.: 5503501 immediately available from Seevetal, Ex works, without transport, subject to prior sale.

Condition: good (used), For sale is a used TOP MASTER planing machine FS 350 with a planing and thicknessing width of 350 mm. The machine is in good condition and has been refurbished and inspected by our qualified personnel. (fully functional) Technical data: - Planing and thicknessing width 350 mm Dedezltigepfx Adrjcn - 3 knife shaft (strip knives) - Planing table length 1800 mm - Thicknessing height 200 mm - Planing table flaps - Drilling support - dust extraction possible The planing machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planing machine, thicknesser, thickness, Felder Reference: R-N3011

Condition: used, Year of construction: 1982, Planing width: 500 mm Table length: 2840 mm Cutterhead speed: approx. 5000 rpm Adjustability of the fence: 0 - 45° Motor power: 5.5 kW Dust extraction port: 160 mm Machine weight: approx. 950 kg including: toothed table lips console for feed hydraulic adjustment of the planing table Dcsdpfjz Agu Dsx Adren NEW planer guard

Condition: new, - New -Description:TERSA quick-change system for changing planer knives in secondsFour-blade shaft for best planing resultsSmooth running thanks to precision unit and heavy cast iron designLong planing tables for precise planingRobust dressing tables made of ribbed gray cast iron, milled and stress-free, making them insensitive and permanently flatLarge, sturdy aluminum dressing fence with round rod guide (1200 x 150 mm), easily adjustable and tiltable up to 45°With auxiliary fence as standardPowerful 5.0 kW industrial motorSturdy cast steel constructionSlot drilling device can be retrofittedLength (product) approx. 2250 mmWidth/depth (product) approx. 1370mmWeight (net) approx. 465kgJointerTotal length of the tables 2250mmMax. chip removal 8mmDressing fence length 1200mmDressing fence height 160mmSuction connectionSuction nozzle diameter 120mmInstallation informationSpace requirement length 2250mmSpace requirement width/depth 1440mmExplanation of space requirementWorking area length 1000mmWorking area width/depth 3500mmChip removal max. thickness 8mmElectrical dataPower drive motor 5kWSupply voltage 400VMains frequency 50HzItem no. 5503521 Dcsdpfx Ajvwf Hrsdron

Condition: excellent (used), CATALOGUE NUMBER: 7915 TECHNICAL SPECIFICATIONS: Shaft width: 640mm Number of knives: 4 pcs Maximum thickness of the workpiece: 200mm – Top: Latches/deflectors Toothed infeed roller, pulling Dcodpfxozrltqe Adren Pressure roller Planing roller Pressure roller Smooth outfeed roller, pulling – Bottom: Adjustable rollers in the lower bed: 2 pcs Motor: 7kW Infinitely variable feed speed control Dimensions (L/W/H): 1800x1250x1150mm Weight: 1250kg ADVANTAGES: – Bulgarian production – Infinitely variable feed speed control – Used thickness planer, very good condition Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: used, Technical specifications: Max. planing width: 520 mm Max. planing height: 300 mm Cutter head speed: 5000 rpm Number of knives: 4 Number of rollers in the table: 1 Feed rate: continuously adjustable Electric lifting mechanism Power supply: 400 V Motor power: 4 kW Overall dimensions: Dcodpfx Ajzilrbodrsn Length: 1240 mm Width: 1090 mm Height: 1210 mm

Condition: good (used), planing width: 510 mm, working width: 510 mm, working height: 200 mm, Thickness planer REX, table width 510mm, max. planing height 200mm, two cutterblocks. Dodpsy Sxyaefx Adrocn

Condition: new, Catalog number: S097 ADVANTAGES – New machine, in stock – Shaft width 530mm – 4-knife planing shaft – Upper control panel – Long work surfaces – Noise-reducing comb near the shaft – 5.5kW motor – Robust construction TECHNICAL DATA Dcodpsztatbsfx Adron Working width 530 mm Dimensions of the work table 2900 x 540 mm Max. machining depth 8 mm Spindle speed 4700 rpm Diameter of the milling head 125 mm Number of knives 4 pcs Dimensions of knives 540x35x3 mm Dimensions of the cast iron bed 1500x155 mm Motor power 5.5 kW Suction 160 mm Weight 800 kg Net price: 27,000 PLN Net price: 6,280 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. Dcedpfx Adszvfm Esren • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.

Condition: new, Year of construction: 2026, machine/vehicle number: DMS 51 E, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, type of input current: three-phase, planing width: 510 mm, tool diameter: 100 mm, rotational speed (min.): 5,000 rpm, total length of planing tables: 860 mm, overall weight: 640 kg, Equipment: CE marking, Thickness planer DMS 51E with a three-row spiral cutterhead, 84 knives, four-way rotatable, and reversible indexable inserts 15x15x2.5mm. Planer width 510mm, 2 table slide rollers with fine adjustment in the thickness table. Dcsdpsz E A U Nefx Adrsn The thickness table is mounted on four large-sized spindles, ensuring stability and preventing tilting; the height adjustment of the thickness table is motorized via push buttons with fine adjustment and an electronic digital display, as well as an integrated handwheel on the side. Thickness table dimensions are 860 x 530mm, working/planing height is 3.5-230mm. Maximum chip removal is 6mm. Steel infeed roller with spiral teeth for optimal feed, and a satin-finished steel outfeed roller. Feed speed is continuously adjustable from 4-20 m/min. Minimum working length is 240mm. Dust extraction nozzle Ø160mm, standard with noise protection cladding. The robust steel-cast iron construction ensures a perfect planing result. The machine is test-planed at our facility before delivery.

Condition: used, Technical specifications: Max. planing width: 520 mm Max. planing height: 300 mm Cutterhead diameter: 110 mm Number of knives: 4 pcs Feed rate: 5/8/12/19 m/min Electric lifting Dust extraction port: 160 mm Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 1060 mm Width: 1050 mm Djdpfszvmlpox Adrocn Height: 1280 mm