Used Screw Compressor Ga30Vsd+Ff for sale (11,193)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: Ksdpfx Ahozu Aiboionc 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: excellent (used), Year of construction: 2020, S017015 PROD. ATLAS COPCO Kjdpezz Nndefx Ahijnc TYPE GA45 S/N API588534 YEAR 2020 POWER (kW) 45 CAPACITY (m3/min) 8.3 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no CONNECTION 2' DOCUMENTS no

Condition: excellent (used), Year of construction: 1998, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 01100145, noise level: 70 dB, Used compressed air compressor Brand: Worthington creyssensac Model: RLR 75A5 AIR Year: 1998 Serial No.: 01100145 Working hours: 7358h Features: - Rated power: 55kW/75HP - 8 bar maximum pressure - Flow rate: 573 m3/h - Sound level: ± 70dB - Weight: ± 1.179 Knedpfx Asrg Dcuehiec - Ø compressed air outlet: 2" - Total weight: 1170kg

Condition: excellent (used), Year of construction: 2011, operating hours: 53,132 h, functionality: fully functional, power: 132 kW (179.47 HP), volume flow: 1,596 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Screw compressor GA132VSD Atlas Copco Knsdpox Rwz Tjfx Ahisc Integrated frequency converter 132 kW 8.5 bar 26.06 m³/min

Condition: used, Year of construction: 1991, Technical details: feed pressure: 10 bar volume capacity: 4,05 m³/min liter capacity: 4050 l/min Number of working hours: 16160 h total power requirement: 30 kw weight of the machine ca.: 0,67 t space requirements of the machine approx.: 2,2x0,9x1,65 m compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar Knsdpfx Ahou Nz Dnsioc *

Condition: used, Year of construction: 2005, operating hours: 39,119 h, functionality: unexamined, Equipment: refrigerant dryer, KAESER AIRTOWER 6 with Aquamat 2 Oil-Water Separator Knedpfx Ajz Abp Aohijc Under the name Kaeser Airtower 6 (often based on the SX 6 compressor stage), Kaeser offers a compact, ready-to-connect compressed air station that consists of a screw compressor and an integrated refrigeration dryer. Performance Data & Function Motor Power: 4.0 kW Flow rate (Delivery rate): At 8 bar operating pressure: approx. 0.49 m³/min (490 l/min) At 11 bar operating pressure: approx. 0.37 m³/min (370 l/min) Integrated refrigerated dryer function: Provides dry compressed air directly from the station (dew point +3 °C) Control: Equipped with the electronic monitoring system, Sigma Control. The KAESER AQUAMAT 2 is a classic oil-water separator for legally compliant treatment of compressed air condensate from compressor systems.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, power: 250 kW (339.91 HP), volume flow: 2,256 m³/h, pressure (max.): 9.75 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco GA250FF Dryer integrated 250 kW 9.75 bar 37.80 m3/min Knjdpfx Ahezhu Naoioc Year of manufacture: 2007 Main motor defective Price: 9,000 EUR

Condition: good (used), Year of construction: 2010, This is your *KAESER SK 25 compressor + 500L tank + TBH 23 dryer*. - *KAESER SK 25 - SIGMA screw compressor* - *Part No. 101958.0 / Serial 1562* - *Hour meter:* - Photo 1: *20,704 total hours* - This is low for a KAESER; they typically run for 60,000 hours. - Photo 2: *5,224 hours under load* (1) - This represents the core operating time of the machine. Kjdpfez Ab A Asx Ahionc - Photo 3: *314 hours* - Hours under pressure (2). - *Displayed pressure 0.0 bar = normal shutdown, no fault.* - *Complete set:* - SK25 compressor (15 kW - approximately 2 m³/min at 8 bar) - Vertical tank X. PAUCHARD 500L galvanized (with pressure gauge) - KAESER TBH 23 KRYOSEC refrigeration dryer.

Condition: good (used), Year of construction: 2017, Boge C10 LDR-350 Screw Compressor + Dryer + Receiver tank Manufacturer: Boge Model: C10 LDR 350 Ksdpfx Asyfpk Uehienc Year: 2017 Max. pressure: 10 bar Receiver volume: 350 liter Rate of flow: 1,03m3/min Motor speed: 1.500 min Motor Power: 7,5kW Machine Dimensions LxWxH: 1.960x72x1.350 mm Machine Weight: 350 kg.

Condition: excellent (used), Year of construction: 2008, PROD. MAUGUIERE TYPE MAV400 S/N CAI027542 YEAR 2001 POWER (kW) 30 OUTPUT (m3/min) PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 60238 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) no Knsdpfx Ahoz Eap Deijc ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), Year of construction: 2012, operating hours: 11,118 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 972.6 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Premium used Atlas Copco GA90 90 kW 7.5 bar Kjdpfot E I D Eox Ahijnc 16.21 m3/min Only 11,118 operating hours!

Condition: excellent (used), Year of construction: 2014, Total power: 55 kW Power supply: 400 V / 50 Hz Knsdpfozy Hrkjx Ahiec Maximum operating pressure: 8 bar Motor speed: 3,500 rpm Weight: 1,300 kg.

Condition: new, Year of construction: 2023, feed pressure 10.0 bar Effective free air delivery 700 L/min motor 400 V 0 250 Liter weight of the machine ca. 397 kg. total power requirement 5.5 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Knjdpfxexaahxs Ahisc Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: excellent (used), Year of construction: 1999, PROD. GRASSAIR TYPE S88.07 S/N 88070799n416 YEAR 1999 POWER (kW) 30 CAPACITY (m3/min) 4.50 PRESSURE (bar) N/A Knodpfx Aez Dh Uxshioc HOURS (RUNNING/TOTAL) 6437/10922 INVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), S014913 PROD. ATLAS COPCO TYPE GX18 S/N API441069 YEAR 2005 POWER (kW) 18.5 CAPACITY (m3/min) 2.64 Knodpfx Asz Dwb Iehioc PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 46443 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON-BOARD TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), Year of construction: 2015, operating hours: 65,031 h, functionality: fully functional, volume flow: 1,012 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Atlas Copco GA90 90 kW Ksdey A Nwkepfx Ahijnc 7.5 bar 16.87 m3/min Year of manufacture: 2015 Operating hours: 65,031

Condition: used, Year of construction: 2000, overall weight: 3,860 kg, CompAir screw compressor Knedpfx Aeu Rn Ngohioc Model: Champion 180 Year of manufacture: 2000 Intake pressure: 1 bar Stage pressures: 2.2 / 12 bar Volume flow: 17 m³/min Engine power: 110 kW The compressor is in working order and was regularly serviced and inspected until it was decommissioned.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 349029, overall weight: 2,010 kg, noise level: 69 dB, Equipment: type plate available, Voltage: 400V Phase: 3 Frequency: 50 Hz Ksdewrrn Dopfx Ahisnc Flow rate: 14.72 m³/min Speed: 3000 min⁻¹ Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: Air Stage pressure: 7.5 bar g Full load current: 169 A The CompAir screw compressor L80-7.5A is a reliable and efficient solution for compressed air supply in various industrial applications. With its robust design and modern technology, this model ensures stable and continuous compressed air supply that meets the high requirements for performance and reliability. The compressor is characterized by its easy operation, low energy consumption, and minimal maintenance, making it an economical choice.

Condition: excellent (used), Year of construction: 2015, COMPAIR C115-12 mobile compressor (DLT1303), fully serviced machine with air dryer (aftercooler). Very good condition. REGISTERED IN POLAND. Compressor registered in Poland. Technical specifications: Kedpfx Aew Rb Aaehijnc capacity: 11.5 m3/min; operating pressure: 12 bar; year of manufacture: 2015; engine: CUMMINS; operating hours: 2988. Compressor is fully functional. Link to video below.

Condition: excellent (used), Year of construction: 2004, S016550 PROD. RENNER TYPE RSK37 Knodez Elfdspfx Ahijc S/N 8470 YEAR 2004 POWER (kW) 37 OUTPUT (m3/min) 6.15 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 7166 / 25832 FREQUENCY CONVERTER no BUILT-IN DRYER yes EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1' NEW/USED USED

Condition: as good as new (ex-display), Year of construction: 2024, pressure (max.): 13 bar, CSA 15/13 SCREW COMPRESSOR, NO. 1,000 MOUNTED ON 500-LITER TANK WITH DRYER AND FILTERS 11 kW, 15 HP MAXIMUM PRESSURE: 13 BAR 400V/50Hz/3-PHASE FLOW RATE: 1147 L/min NOISE LEVEL: 67 dB(A) DIMENSIONS: 1540x665x1535 mm, WEIGHT: 450 kg Attached: User and maintenance manual CE declaration of conformity Kjdsz Duc Nopfx Ahienc

Condition: used, Well-maintained firstAIR FAS37 rotary screw air compressor (Eucomp Germany airend, ALMiG Kompressoren GmbH brand). Technical specifications: Knodpfez Anybjx Ahisc Type: FAS37 (rotary screw compressor) Year of manufacture: 2020 (01/2020) Motor power: 37 kW / 400V / 50Hz Free air delivery: 5.10 m³/min (180 CFM) Max. working pressure: 10 bar (10.5 bar) Net weight: 880 kg Dimensions: 1000×1250×1310 mm Motor: Smotor IE3, three-phase asynchronous, 2955 rpm

Condition: used, machine/vehicle number: 220.00452, power: 7.5 kW (10.20 HP), Used, functional ALUP compressor stage Air End Tri AG 51-S The stage is used and in working order. Kedoz Er Edjpfx Ahisnc Art. No.: 220.00452 Motor: 7.5 kW 3970 rpm 16.5 A The price is €350 plus VAT. Freight shipping is available for an additional charge.

Condition: new, Year of construction: 2022, feed pressure 10.0 bar Effective free air delivery 1.950 L/min motor 400 V 0 250 Liter weight of the machine ca. 467 kg. total power requirement 15.0 kW range L-W-H 1915 x 650 x 1640 mm Kjdpjw U U Scsfx Ahijnc Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), volume flow: 0.74 m³/h, pressure (min.): 10 bar, Exhibition machine Ksdpfx Ahoxq Elwjionc includes 2 x 90-liter pressure tanks / galvanized includes refrigerant dryer includes automatic condensate drain includes oil-water separator includes microfilter includes sub-microfilter Rated power 5.5 kW Delivery rate at 10 bar: 0.74 m³/h Dimensions (W x D x H): 980 x 755 x 1257 mm approx. 300 kg