Used Serra Ke90-7 for sale (26,939)

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads Rodpfx Aeymaw Uolaecf - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: used, overall weight: 38,000 kg, first registration: 08/2005, loading space length: 13,300 mm, loading space width: 2,460 mm, loading space height: 2,600 mm, Equipment: ABS, SOR Iberica deep-freeze semi-trailer Dimensions: 13.30 x 2.46 x 2.60 m 7 cm wall insulation! Carrier 1950 refrigeration unit (first registered 2017) BPW axles with disc brakes Good condition Belgian registration Redpfx Ajyi I Iajlajcf Price: €7,900 net

Condition: excellent (used), 18.50 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Rack Length: 18,500 mm Upright Height: approx. 10,300 mm Upright Depth: approx. 1,100 mm Upright Type: PB-80 Profile: 80 x 60 mm Layers: bolted Upright Finish: galvanized Clear Bay Width: 3,600 mm Crossbeam: 3,600 x 120 x 45 mm Crossbeam Finish: blue painted (RAL 5015) Number of Bays: 5 Number of Levels: 7 including floor space Max. Pallet Weight: 500 kg Maximum Bay Load: 2,000 kg Maximum Bay Load: 12,000 kg Pallet Positions: 140 Scope of Delivery 6 x Uprights 10,300 x 1,100 mm galvanized 60 x crossbeams 3600 x 120 x 45 mm blue Rcjdpsyvrv Ajfx Alaof Technical Summary Uprights: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, bolted truss construction. Crossbeams: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface provides long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and transverse braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Profile: The 80 x 60 mm profile dimension is typical for medium to heavy-duty pallet rack uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. With standard pallet heights (1.20 m), you can install 6 beam levels in the 10.3 m high racking system. Together with the floor-level storage spaces, this results in 7 storage levels, providing a total of 140 pallet spaces with 4 pallets per bay. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), 7.4 m Nagy PB-80 Pallet Rack With a standard pallet height of 1.20 m, you can install 6 beam levels in the 10.3 m high rack. Together with the floor-level storage spaces, this results in 7 storage levels, which, with 4 pallets per bay, provides a total of 28 pallet spaces per bay. Material & Construction: The galvanized surface offers long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and cross braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Profile: The 80 x 60 mm profile dimensions are typical for medium to heavy-duty pallet rack uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. Manufacturer: Nagy Type: PB-80 Shelf length: approx. 7.40 m Upright height: approx. 10.30 m Upright depth: approx. 1.10 m Upright type: PB-80 Profile: 80 x 60 mm Frame: bolted Upright finish: galvanized Clear span: 3.60 m Crossbeam: 3600 x 120 x 45 mm Crossbeam finish: blue painted (RAL 5015) Number of bays: 2 (basic bay + 1 extension bay) Number of levels: 7 incl. floor storage space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible bay load: 12000 kg Pallet spaces: 56 Scope of delivery 3 x uprights approx. 10.30 x 1.10 m galvanized 24 x Crossbeam approx. 3.60 m blue incl. locking pins Your partner for safe warehouse logistics: Assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether new installation, conversion, or warehouse closure – we handle the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving for small parts and archives - Mezzanine floors for optimal space utilization Rack inspection & testing according to DIN EN 15635 Safety is a legal obligation. We conduct the annual expert inspection (according to DGUV Regulation 108-007): - Inspection for deformations and damage. Rcedpfeyvr Aiox Alasf - Checking of locking pins and load capacity labels. - Creation of a legally compliant inspection report including an inspection sticker. We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more pallet racking – new and used – in our shop! International shipping costs on request!

Condition: used, Quantity available: 1 unit Redpfx Aox R A Sdelascf Classification: ATEX Manufacturer: GEA Tuchenhagen Model T-smart 7 / 7881 SES.P22EEE/43/65 Nominal diameter : DN 80 Type : Butterfly valve Set air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 2 units Manufacturer: GEA Tuchenhagen Type: Butterfly valve Model T-smart 7 / 7111 TM1.P2AAL/81/52 Nominal diameter : DN 25 Rcodpex R A S Dsfx Alaof Setting air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available: 14 units Manufacturer: GEA Tuchenhagen Type : Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 25 Setting air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L Rjdpfx Asx R A S Rslascf

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: Rodpfx Ajx U A Iaelajcf The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1998, Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data - Capacity: 7,500 bottles/hour - Adjustable speed range: 3,750 – 7,875 bottles/hour - Cycle time: 6.72 seconds - Total treatment time: 11.65 minutes - Bottle formats: Up to Euro-NRW - Bottle rows per carrier: 14 - Bottles inside machine: 1,456 - Bottle carrier trays: 110 - Effective spray times: - Hot lye 8.96 seconds - Lye II 8.96 seconds - Hot water II 8.96 seconds - Hot water I 8.96 seconds - Cold water: 13.44 seconds - Fresh water max.: 8.96 seconds Rcsdpexn A S Nsfx Alajf - Utilities - Water consumption: 3.25 – 3.38 m³/h at 60°C - Power connection: 12.0 – 12.9 kW - Thermal energy consumption: 3,528 × 1000 kJ/h - Dimensions - Length with cabinet: 7,020 mm - Width of frame: 1725 mm - Height: 2300 mm

Condition: good (used), Year of construction: 2013, Kaeser TAH7 Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Rcodpfxjwhvqze Alasf Flow rate: 0,60 m³/min

Condition: used, Year of construction: 1996, functionality: fully functional, Universal Milling Machine Kunzmann WF7/3 CNC with Heidenhain TNC 124 Control – Excellent Condition!! Technical Data: • Year of manufacture: 1996, Machine No. 370173 • Rigid angle table • Infinitely variable spindle speed up to 3,700 rpm • Feeds on 3 axes, continuously variable from 0 to 1,000 mm/min • Travel distances X/Y/Z: 600/400/400 mm • Rapid traverse X/Y/Z: 5 / 5 / 4 m/min • Table surface: 650 x 350 mm • Table load capacity: 300 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quill – SK40 • Hydraulic tool clamping system • Weight: approx. 1,800 kg • Space requirement: approx. 2.3 x 2 x 2 m • Main drive motor: 4 kW • Total power consumption: approx. 7 kVA Features and Equipment: Rodew Rx Tiopfx Alajcf • Heidenhain TNC 124 CNC control • Hydraulic clamping for vertical and horizontal operations • Automatic central lubrication • Spindle brake • Technical documentation, spare parts lists, control manual, and programming examples • Full safety enclosure • Coolant system • Electronic handwheel About the machine: For sale is a Kunzmann WF7/3 universal milling machine equipped with a Heidenhain TNC 124 CNC control. This universal milling machine is in outstanding condition. It comes from an automotive manufacturer where it was used only sparingly for training purposes. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal modes. Switching from vertical to horizontal operation is easy, achieved by simply swiveling the vertical head aside. The guideways are automatically lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected at our facility. Take the opportunity to view and test the Kunzmann under power at our location.

Condition: used, mileage: 42,405 km, power: 103 kW (140.04 HP), first registration: 04/2020, fuel type: diesel, maximum load weight: 1,215 kg, overall weight: 3,500 kg, tire size: 16 Zoll, color: red, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 2,700 mm, loading space width: 2,040 mm, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, power assisted steering, traction control, The vehicle is in excellent technical and visual condition. All vehicles for sale are inspected and repaired in our certified automotive workshop. Rcedpfxsxcvpqe Alajf Non-smoker vehicle Features: First owner, 7-seater, ABS, ASR, ESP, driver's airbag, electrically adjustable exterior mirrors, electric windows, headlight range adjustment, daytime running lights, remote central locking and immobilizer, automatic climate control, programmable auxiliary heater with remote control, hands-free system, onboard computer (MFA), cup holders, power steering, leather steering wheel, adjustable steering column, CD MP3 radio, Bluetooth, summer tires, sliding windows left and right, 16-inch tires, DPF EURO6 Gross vehicle weight: 3500kg Payload: 1215kg Towing capacity: 3000kg Cargo area: internal length: 2.70m, width: 2.04m We are happy to accommodate your requests and can carry out various retrofit works in our workshop: Tow bar from €800, reverse camera from €600 1-year Auto Helle warranty as per warranty certificate. Last oil service performed at VW at 35,000 km Current vehicle inspection Full service history or digital service record available Repair, service, and reconditioning costs are included in the purchase price. Financing by bank possible Subject to changes and errors.

Condition: good (used), Load stand, swivel stand, lifting stand, shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread Rcedpfsgtu Uuex Alajf -Quantity: 7 pieces -Height: 220 mm -Base plate: 450 x 350 x 20 mm -Shackle plate: 146 x 146 mm, M42, 4 pieces with shackle -Price: complete -Dimensions: 450/350/H220 mm -Weight: 42 kg/unit

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter -Manufacturer: Cedima, joint cutter type CF 16.1D -Saw blade: Ø max. 480 mm -Engine: Hatz E 780U 7 kW Rcedpfx Aohzzb Relaef -Dimensions: 1150/680/H920 mm -Weight: 250 kg

Condition: used, mileage: 288,500 km, power: 265 kW (360.30 HP), first registration: 04/2011, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, color: grey, gearing type: automatic, Equipment: ABS, air conditioning, compressor, parking heater, MB Actros 2536 Horse Truck, 7 Horses, Pop-Out Vehicle shows signs of use. 7 horses, side and rear ramp, pop-out, cellar under living area, storage compartments around the truck, fresh water, waste water tank, 6 sleeping berths, living room, video and temperature monitoring for the horse compartment, LG stationary air conditioning, stationary heater, TV/satellite, fine wood, bathroom, shower, toilet, air conditioning, kitchen, leather seating area, microwave, refrigerator, external saddle room, cruise control, alloy wheels, air suspension, trailer hitch, and more. Redpfxex Ambqo Alajcf Errors/typing errors and prior sale are reserved. * NET PRICE POSSIBLE. * Top leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands in the field of horse trucks and trailers. Please arrange an appointment in advance. Contact: Richard Theurer, Andreas Theurer

Condition: used, Synchronous servomotor with holding brake and gearbox, Gear motor, electric motor, right-angle gear motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanent magnet synchronous servomotor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 14.51 kW Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Stall torque M0: 83.4 Nm Rated current In: 31.5 A Stall current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, single pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole terminal box - Resolver connection, 12-pole terminal box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 718690 Art. No.: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Right-angle gearbox WESTFALIA Systemtechnik Hollow shaft output: inner Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Shaft also ground on the outside - Gearbox can be mounted on two flange surfaces Rcsdpfx Aljf Dlzuoaof - Mounting holes on the gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg Good condition

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL Rjdpfx Ajuxfu Nslajcf - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: excellent (used), mileage: 309,518 km, first registration: 10/2018, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 6,450 mm, loading space width: 2,500 mm, loading space height: 800 mm, Year of construction: 2018, operating hours: 788 h, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, soot filter, spoiler, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Power brake booster - Low noise emission - Speed limiter - Refrigerator - LED lights - Alloy wheels - Air suspension - Air horn - Particulate filter - Reversing camera - Sun visor - Stability control - Auxiliary heater - Toolbox - Power take-off (PTO) - Towing jaw = Further information = Axle configuration: Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steered Weights: Unladen weight: 16,875 kg Functional: Mast: Telescopic (7 sections) Mast length: 20.8 m Lifting capacity: 9,400 kg Lifting height: 2,080 cm Crane: HIAB X-HIPRO 302 E-7, year 2018, mounted behind the cab Superstructure brand: HIAB X-HIPRO 302 E-7 CE marking: Yes Condition Rodpfx Ajuxu S Rjlaocf Technical condition: Very good Optical condition: Very good Financial information Price: On request MAN TGX 35.500 8X4 TRIDEM + HIAB X-HIPRO 302 E-7 CRANE EURO 6 | PACKAGE | 500 HP DRIVE 8X4 TRIDEM LAST AXLE IS LIFTABLE AND STEERABLE WHEELBASE 420 CM AIR SUSPENSION TGX SLEEPER CAB WITH AIR CONDITIONING, CAMERA, NAVIGATION, REFRIGERATOR AUTOMATIC TRANSMISSION TRAILER COUPLING TOOLBOXES ALCOA WHEELS OPEN PLATFORM BODY WITH REMOVABLE ALUMINUM SIDE WALLS 645 CM X 250 CM X 80 CM LASHING EYES AND STAKE POCKETS HIAB X-HIPRO 302 E-7 CRANE 7X HYDRAULIC EXTENSIONS 2X OUTRIGGERS RADIO REMOTE CONTROL MAX LIFTING CAPACITY 9,400 KG MAX LIFTING CAPACITY AT 1,850 CM 920 KG MAX WORKING HEIGHT 20.8 METERS OIL COOLER FOR CRANE HYDRAULICS ONLY 788 OPERATING HOURS!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: good (used), Circuit breaker, fuse, circuit breaker, circuit breaker -Manufacturer: Siemens -Type: 5SY6104-7 -Number: 290x fuses available -Price: per piece -Minimum order: 2 pieces Rsdpfev Tc Ufjx Alajcf -Dimensions: 90/17/H75 mm -Weight: 0.15 kg

Year of construction: 2025, condition: new, Powder filling and capping system for cans including vacuuming and gas flushing device. - Specifications: Can diameter: 99-127mm; can height: 100-180mm; output: max. 7 cans/minute at -90Kpa Vacuum; residual oxygen: = 3%; nitrogen pressure: 0,1-0,8Mpa; air supply: 0,6-0,8Mpa; power: 3kW, AC220V; dimensions of the machine: L1900xW800xH1800mm; weight: 880kg. – Specifications laser engraver: engraving depth: 0.01mm-0.4mm; laser wavelength: 10.6um; minimum line width: 0.1mm; minimum character size: 0.2mm; repeat accuracy: ±0.03mm. Rsdpfxev Nk S Rj Alaocf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5380x1860x1760 mm Rodpfx Alev A Hryjaocf Weight 6050 kg Total power requirement 54,75 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5830x1860x1830 mm Weight 6300 kg Rcsdpfx Alev A Hr Hjaef Total power requirement 54,75 kw

Condition: good (used), Year of construction: 1999, Lg 33922 Unwinding and guiding unit SOPREM BRH 7-200-80U-1250 BAP Web width: max. 200 mm Coil weight: max. 1,250 kg Spreading range: approx. 380 to 430 mm Coil outer diameter: max. 1,300 mm Redpfehuwacox Alaecf Web thickness: approx. 0.8 to 3 mm Working direction: from right to left

Condition: used, Year of construction: 2005, X AXIS TRAVEL: 10000 MM Y AXIS TRAVEL: 4000 MM Z AXIS TRAVEL (RAM): 1000 MM W AXIS TRAVEL (SPINDLE): 800 MM TOTAL Z + W AXIS TRAVEL: 1800 MM SPINDLE DIAMETER 160 MM SPINDLE MOTOR POWER 40 KW SPINDLE RPM: 3000 RPM SPINDLE TAPER ISO 50 DIN 69871/1A Rcsdpfx Aleup Dcleaof NR 02 SPEED RANGE RAM DIMENSIONS: 460 X 520 MM RAPID FEEDING 20000 MM/MIN ROTARY TRANSLATION TABLE MODEL MG 50 OF 2500 x 3500 mm , load 50 ton , 360000 position 0,001° stroke 2000 mm HEIDENHAIN iTNC 530 CNC TOOL CHANGER 40 PLACES MANUAL UNIVERSAL HEAD ANCHOR PLATE 6000 X 2000 X 300 MM EXTERNAL REFRIGERATION TOTAL INSTALLED POWER 110 KVA YEAR : 2005

Condition: used, mileage: 130,000 km, power: 228 kW (309.99 HP), first registration: 12/2002, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: silver, gearing type: semi-automatic, Equipment: ABS, air conditioning, parking heater, IVECO 18310 Horsetruck 6-7 horse apartment with carriage trailer for 3-4 carriages. NEW TÜV inspection 6-7 horses, rear ramp, cellar under apartment, storage compartments around the truck, fresh water, Rodpfx Ajt Scgnslajcf 4 sleeping places, living room, / video surveillance for horse compartment, LG stationary air conditioning, heating, TV/Sat, fine wood, bathroom, shower, toilet, air conditioning, kitchen, seating area, microwave, refrigerator and freezer, external saddle cabinet, cruise control, air suspension, tow bar, and much more. Subject to errors/input errors & prior sale. * NET SALE POSSIBLE. * Top leasing offers * Net price domestic plus 19% VAT Available immediately//Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes in the area of horse transporters and trailers. Please make an appointment in advance. under under Richard Theurer / Andreas Theurer